Hello,
i have problem with flashing redmi note 9 pro in edl mode.
I need authorized Mi account. Can somebody help me with it? Via teamviewer? Reward certain!
Thank you very much, Lukas
Edl mode is basically service center repair from xiaomi.You need ifu dongle or contact repair center.or black market not recommended do.
This section is for MERLIN (redmi note 9).
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
explicate mejor
[GUIDE] How To bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
VD171 said:
This section is for MERLIN (redmi note 9).
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Click to expand...
Click to collapse
Do I need to flash it via fastboot ?
I have already done it but my device is detected in com ports for only 2 seconds and then charging screen appears. I have also installed device filter(libusb).
And after flashing preloader by device doesn't stay in edl mode even I connect my phone while pressing and holding vol down .
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
friend here you have the guide to remove the HARD BRICK from your mobile.
I hope it will be of your help.
Related
Hello,
I was running unlocked bootloader and pixelexperience rom. Today I wanted to try to flash latest xiaomi.eu and now my phone is bricked.
Steps:
Twrp -
flashed data (after that i saw that i had an error and data didn't flash)
installed rom (because i didn't see the error) - rom failed to install
flashed data again from twrp advanced option
phone rebooted and now it bootloops on mi logo. i do not have recovery nor fastboot.
what can I do in this situation? i searched the forum but there is nothing similar
You must have fastboot, check how install miui using mi flash. I use this method and working for me
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Andrei221 said:
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Click to expand...
Click to collapse
Exact same issue, no fastboot or EDL mode. Tried updating the latest Miui 11 - Android 10 - Xiaomi EU Rom (Jan 25th) and the phone has been bricked.
Solution Deleted.
got into EDL mode using test points, but now i have edl auth error - "cannot receive hello packet"
Seems like a common problem for bricked devices and need mi account with the right edl auth privileges.
Any help welcome.
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
DoYouWantFriesWithThat said:
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
Click to expand...
Click to collapse
you know hoe to bypass EDL authorization?
Leoleo96 said:
you know hoe to bypass EDL authorization?
Click to expand...
Click to collapse
No. I've tried different things:
- trying to flash with QPST in EDL mode (9008)
- trying to flash fastboot roms with various/ancient versions of MiFlash in EDL mode (9008)
- flashing standalone modem firmwares (old ones, new ones, non-ARB ones, packed with NON-HLOS, etc.) from TWRP
- doing a MITM on the response that MiFlash & MiFlash PRO get from https://update.miui.com/updates/miotaV3.php
- doing a MITM on MiFlash and redirecting requests to old URLs (https://update.miui.com/updates/miotaV2.php, https://update.miui.com/updates/miota.php) and black-box testing them
- using MobileEdit Forensic tool to exploit the EDL firmware
*Note*: I've obviously tried all the different FireHose programmers that are floating around (including those distributed by MobileEdit).
Nothing works.
Especially trying to modify the response (if one understood its format) could very well be useless because it could be that the response from update.miui.com is validated directly by the firmware itself (like a challenge-response authentication) - this has to be verified.
The only possibility I see for now is to flash the original Xiaomi Recovery, let it connect to MiFlash Pro (choosing option n.3 from the menu), and then using IdaPro to trick MiFlash Pro into telling the Recovery to flash the phone. It shouldn't be hard, and I think it *MIGHT* offer the possibility to bypass ARB & Authentication (but I might be wrong: it might be equivalent to flashing from Fastboot). That waits to be tested.
I hope this saves y'all from wasting time.
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
tarkusy said:
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
Click to expand...
Click to collapse
Any suggestion to un-brick mi8 and not mi8Lite?
I don't understand how to bypass EDL Account only coping a file on images folder
Hello
I Bricked My RN9 by triggering an older Miui Version
I saw on the internet and most people said that I should go to a Mi Service Center
they took it there for almost 3 weeks and then, They told me the phone is out of warranty!!
How should i fix it
Thanks.
Edit: It's actually not a hard brick
The phone bootloops and the pc gets recognized to it but, I can't boot into recovery mode or fastboot mode so I can't flash anything.
Anyone knows the solution ?
Actually , the Official store should be able to fix it.
Enter fastboot and flash
If it's a softbrick, you're seriously lucky
Enter fastboot mode by holding down volume down and power button
In some cases once the phone is bootlooped, you only need to hold volume down
Once entered fastboot, flash miui latest version via Mi Flash tools
Actually all firmwares keep in same rollback version.
So you can have V12.0.6.0 installed and then flash older version, as V11.0.2.0. Or opposed.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
I've seen a lot of threads about this but they only have solutions for a bricked merlin with a fastboot. I've also seen a fix using sp flash tool using no auth da but they don't seem to work now. Is there a solution for this?
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If it keeps restarting, you've made any wrong modification. You need to follow your steps back and try to unmake your modification.
If you can't enter in fastboot mode or recovery mode, you need to flash stock rom using sp flash tool.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
If you are using V12.0.5.0 or higher, TWRP will not work.
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Oh wait, how can I make my pc recognize my redmi note 9 without pressing any keys and how can i use the preloaders? anyway thankyou for this sir.
CruisaderX said:
Oh wait, how can I make my pc recognize my redmi note 9 without pressing any keys and how can i use the preloaders? anyway thankyou for this sir.
Click to expand...
Click to collapse
So easy.
Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223089/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
So easy.
Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223089/
Click to expand...
Click to collapse
My phone is not shutting down, should I remove the batteries? It continuously just looping and my pc nor sp flashtool can't detect it.
CruisaderX said:
My phone is not shutting down, should I remove the batteries? It continuously just looping and my pc nor sp flashtool can't detect it.
Click to expand...
Click to collapse
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
Click to expand...
Click to collapse
I am using 12.0.04 sir.
CruisaderX said:
I am using 12.0.04 sir.
Click to expand...
Click to collapse
Try another cable.
Try USB3.0.
Try USB2.0.
TRY EVERYTHING YOU CAN.
If your pc can't detect your device, probably you need to install appropriate usb drivers.
Try this: https://androidmtk.com/download-mtk-usb-all-drivers
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
Try another cable.
Try USB3.0.
Try USB2.0.
TRY EVERYTHING YOU CAN.
If your pc can't detect your device, probably you need to install appropriate usb drivers.
Try this: https://androidmtk.com/download-mtk-usb-all-drivers
Click to expand...
Click to collapse
I tried but it can only be detected if I press the vol - button which gives brom error. Im losing hope :<
CruisaderX said:
I tried but it can only be detected if I press the vol - button which gives brom error. Im losing hope :<
Click to expand...
Click to collapse
If your pc can detect your phone with vol - button, everything is fine.
And you are NOT on V12.0.4.0.
Brom error means your bootloader will accept flashing in EDL mode only.
For use sp flash tool V12.0.5.0 or higher, you will need an authorized account for flashing in EDL mode.
You need to go the service centre for professional assistance.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
If your pc can detect your phone with vol - button, everything is fine.
And you are NOT on V12.0.4.0.
Brom error means your bootloader will accept flashing in EDL mode only.
For use sp flash tool V12.0.5.0 or higher, you will need an authorized account for flashing in EDL mode.
You need to go the service centre for professional assistance.
Click to expand...
Click to collapse
Does that mean I can't fix it alone? Oh my... any way thank you sir.
CruisaderX said:
Does that mean I can't fix it alone? Oh my... any way thank you sir.
Click to expand...
Click to collapse
Unhappy, yes.
Please, read this: https://www.xda-developers.com/xiaomi-edl-unbrick-authorized-mi-accounts/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Try with MTK Exploit tutorial.... this will help u...
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
PLEASE HELP!!!!!I have a redmi note 9 , I try to flash TWRP and ended a boot loop or a soft hard brick.
My phone is starting over and over again, i can not access to fast boot even i click power off + vol down...i guess this is a soft brick
i watched youtube tutorials and it needs to flash fastboot and flash firmware.
I CAN DO ALL THAT BUT MY PROBLEM IS I cannot connect my phone to laptop/pc because it kept on starting (no fast boot,cannot enter even i press vol down + power off)..my laptop cannot recognize if there is a connected phone and even i go to Smartphone Flash tool i cannot proceed because it needs to be in a fastboot.,,.,i cannot access to fastboot so it means my laptop cannot recognize a connected redmi note 9
Try to bypass the EDL authentication.
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
Hi good day!
So here is the scenario:
After unlocking bootloader, i tried to flash stock rom on the device. Flash was successul (via miflashtool), however, it bootloops either into miui recovery or miui logo.
So what I did next was to flash eea rom on it. However, flashing took only 4 secs. The screen stayed at fastboot boot. So what I did was manually reboot the phone. However, the phone just died. Black screen, no vibration, no charging etc. Is there any way I could recover it? Any guide out there?
hello ... dont worry i did that so many time..
just search and download mtk daa sla bypass tool (its for bypassing mtk daa sla auth so you can flash in brom and preloader mode.. without autorized account ) and spflashtool-5.2xxx.. to do the rom flash ...
run mtk bypass and hold all hw keys (vol+ vol- and power for poco m3 pro and redmi note 10 5g) and connect the phone wait till mtk bypass do its work .. after that (( dont disconnect the phone )) start spflashtool in option select uart mode load scatter file that is in fastboot rom folder and press download...
Use this link... its all you need to unbrick your phone https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/
You can try this link
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
forum.hovatek.com
Thanks a bunch for your replies. I will take a look at each of it
Zaiserr2 said:
You can try this link
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
forum.hovatek.com
Click to expand...
Click to collapse
Hi good day! Might as well take this chance to ask how to use sp flashtool to flash stock rom of the unit
I'm quite new to the usage of this flashing tool. Thanks