Related
Hi everyone, I was wondering if there is a composite install guide for Oneplus 3T devices for all ROM's for Viper4Arise. I really love that Mod. I am currently on RR 5.3.8 and I find that the installation via Magisk is very buggy and leads to FC almost all apps and the phone freezes after a few minutes of installation. I had no such issues installing Viper4Android though. I am a noob so find the current install method on the thread very complicated. Is there a zip file which makes it easier regardless of ROM or if there is anything specific to RR roms which can be used?
Don't know of any such guide, but it's a good idea to have one (although the request for a guide "for all ROMs" may be a tall order).
I was reading through the following sounds mods thread yesterday, and it was confusing as heck, and seems like some folks have varying results: https://forum.xda-developers.com/oneplus-3t/help/best-sound-mods-t3555160
I can't speak to RR, but what I can say, is that I easily installed ARISE on stock rooted ROM (rooted with SuperSU) with one of the AROMA versions; and ARISE works flawlessly. Did not need SELinux permissive or Busybox. I also skipped all of the options in the AROMA installer, since honestly, I don't know what most of them are, and they aren't critical for the "core" ARISE experience.
Happy to report that I was able to fix this. What I did was a little bit of sacrifice but I think I care about sound quality on my phone more than anything else. What I did was replace magisksu with supersu. While the convenience of magisk would be missed, I am happy that now I have arise numbers Module with dolby atmos installed. :good:
cluttered_butter said:
Happy to report that I was able to fix this. What I did was a little bit of sacrifice but I think I care about sound quality on my phone more than anything else. What I did was replace magisksu with supersu. While the convenience of magisk would be missed, I am happy that now I have arise numbers Module with dolby atmos installed. :good:
Click to expand...
Click to collapse
Did you just flash supersu over magisk or was the installation more involved? I was thinking of testing this but wasn't sure if it would work. My plan currently is:
1) Remove all magisk modules
2) Flash SuperSU from Recovery and reboot
3) Reapply magisk modules (V4A Included)
4) Reboot
Was this essentially all you did on your end?
I have tried what you are about to embark on since if I had it my way, I would stick to magisk. Here's what I did, I rooted my phone with SuperSU after uninstalling magisk completely (remove all modules and uninstall using the magisk uninstall zip), I downloaded the magisk manager and tried to rely on the supersu for root access. Magisk did say the phone was rooted after seeking rights from supersu, but eventually just hung the system. Post which it was kind of futile coz it just won't work. If you flash the magisk zip you will cause bigger issues since supersu and magisk would conflict for libraries and that's not good either.
Feel free to try it anyway and see if you get somewhere. Take a backup of course:fingers-crossed:
For me arise works flawless on rr with magisk. And i didnt need any magisk module or extra zip. Only flashed simple modular installer.
cluttered_butter said:
If you flash the magisk zip you will cause bigger issues since supersu and magisk would conflict for libraries and that's not good either.
Click to expand...
Click to collapse
I just wanted to chime in and say that this information isn't correct. Magisk has been designed to work with SuperSU (systemless) as well as MagiskSU.
Instructions
nadejo said:
For me arise works flawless on rr with magisk. And i didnt need any magisk module or extra zip. Only flashed simple modular installer.
Click to expand...
Click to collapse
Can you share the link for installer or instructions for the specific arise installation you did? It'll help me try the same.
Didgeridoohan said:
I just wanted to chime in and say that this information isn't correct. Magisk has been designed to work with SuperSU (systemless) as well as MagiskSU.
Click to expand...
Click to collapse
Was just sharing my experience. Didn't mean to say that my information was correct.
cluttered_butter said:
Can you share the link for installer or instructions for the specific arise installation you did? It'll help me try the same.
Click to expand...
Click to collapse
1.First put this (my custom prop with dolby atmos and viper arise you can further customize it if you want)
https://drive.google.com/open?id=0B5cs9MEMO2MrNGo3eGJJVFdxemc
On sd card (dont rename it and dont put it in any folder) it must be at same place where all your folders are. Like downloads... Pictures...
2.Then go to rr settings and switch to selinux permissive
3.Now flash this file in twrp https://www.androidfilehost.com/?fid=529152257862724645
And reboot.
Have fun
Will give it a shot tonight! Thank you so much!
So this isn't for V4ARISE but rather for the Viper4Android module in Magisk (still using MagiskSU). I was able to get Viper4Android in Magisk to work without setting SE_Linux to permissive or doing anything crazy. My steps were below:
1) Install Magisk
2) Enable Magisk BusyBox
3) Install the Viper4Android module
4) Install the Viper4Android APK
5) Reboot the phone
6) Copy the audio_effects.conf file from:
\ROOT\MAGISK\V4A\SYSTEM\ETC\audio_effects.conf
to
\ROOT\MAGISK\V4A\SYSTEM\VENDOR\ETC\audio_effects.conf
7) Reboot
8) Test...Successful!
Step 5 was probably not needed but I took it as an extra measure. I can't remember the thread that I read step 6 at but immediately after doing that and rebooting my module was working.
Worked like a charm ??thanks so much. Don't know what I was doing wrong all this time
trentonite said:
So this isn't for V4ARISE but rather for the Viper4Android module in Magisk (still using MagiskSU). I was able to get Viper4Android in Magisk to work without setting SE_Linux to permissive or doing anything crazy. My steps were below:
1) Install Magisk
2) Enable Magisk BusyBox
3) Install the Viper4Android module
4) Install the Viper4Android APK
5) Reboot the phone
6) Copy the audio_effects.conf file from:
\ROOT\MAGISK\V4A\SYSTEM\ETC\audio_effects.conf
to
\ROOT\MAGISK\V4A\SYSTEM\VENDOR\ETC\audio_effects.conf
7) Reboot
8) Test...Successful!
Step 5 was probably not needed but I took it as an extra measure. I can't remember the thread that I read step 6 at but immediately after doing that and rebooting my module was working.
Click to expand...
Click to collapse
I have tried Viper4Android but I think Viper4Arise+Dolby is way better. The sound through the speakers is so much louder and with a lot of clarity. If you have a good pair of headphones then its just audio nirvana. Just a personal preference I guess.
Are you using any IRS/Profiles which have worked well for you? Do let me
trentonite said:
So this isn't for V4ARISE but rather for the Viper4Android module in Magisk (still using MagiskSU). I was able to get Viper4Android in Magisk to work without setting SE_Linux to permissive or doing anything crazy. My steps were below:
1) Install Magisk
2) Enable Magisk BusyBox
3) Install the Viper4Android module
4) Install the Viper4Android APK
5) Reboot the phone
6) Copy the audio_effects.conf file from:
\ROOT\MAGISK\V4A\SYSTEM\ETC\audio_effects.conf
to
\ROOT\MAGISK\V4A\SYSTEM\VENDOR\ETC\audio_effects.conf
7) Reboot
8) Test...Successful!
Step 5 was probably not needed but I took it as an extra measure. I can't remember the thread that I read step 6 at but immediately after doing that and rebooting my module was working.
Click to expand...
Click to collapse
I have tried Viper4Android but I think Viper4Arise+Dolby is way better. The sound through the speakers is so much louder and with a lot of clarity. If you have a good pair of headphones then its just audio nirvana. Just a personal preference I guess.
Are you using any IRS/Profiles which have worked well for you? Do let me know
cluttered_butter said:
I have tried Viper4Android but I think Viper4Arise+Dolby is way better. The sound through the speakers is so much louder and with a lot of clarity. If you have a good pair of headphones then its just audio nirvana. Just a personal preference I guess.
Are you using any IRS/Profiles which have worked well for you? Do let me know
Click to expand...
Click to collapse
For my IRS profile I'm using DTS Mode Z128k. I had tried dolby pro logic 2/3 but the way it boosted the volume was just too much. DTS Mode has worked out well so far. What about you?
trentonite said:
For my IRS profile I'm using DTS Mode Z128k. I had tried dolby pro logic 2/3 but the way it boosted the volume was just too much. DTS Mode has worked out well so far. What about you?
Click to expand...
Click to collapse
I typically stick to dolby irs. But the main difference in sound is made by the profiles in viper4arise. I love the Audiophile X profile. Amazing fidelity on rock songs.
trentonite said:
So this isn't for V4ARISE but rather for the Viper4Android module in Magisk (still using MagiskSU). I was able to get Viper4Android in Magisk to work without setting SE_Linux to permissive or doing anything crazy. My steps were below:
1) Install Magisk
2) Enable Magisk BusyBox
3) Install the Viper4Android module
4) Install the Viper4Android APK
5) Reboot the phone
6) Copy the audio_effects.conf file from:
\ROOT\MAGISK\V4A\SYSTEM\ETC\audio_effects.conf
to
\ROOT\MAGISK\V4A\SYSTEM\VENDOR\ETC\audio_effects.conf
7) Reboot
8) Test...Successful!
Step 5 was probably not needed but I took it as an extra measure. I can't remember the thread that I read step 6 at but immediately after doing that and rebooting my module was working.
Click to expand...
Click to collapse
Is it possible to flash after the procedure above -Viper4Arise?
Hi guys, I just bought my 3T, rooted and installed TWRP. Now I`m trying to install V4Arise, but with no success. I tried Freedom ROM... In this ROM V4Arise works fine, but the cell battery drains too fast. I returned to stock ROM... But I dont know how to install V4Arise in stock ROM. Could you help me?
After some trial and error I figured out how to get V4AFX working properly on the Note 7, so here's how:
1) Download and install Busybox for Android NDK and ViPER4Android FX using Magisk Manger.
2) Launch ViPER4Android FX and install the driver, device should reboot.
3) Download and install Audio Modification Library using Magisk Manger.
4) If your ROM already has a audio equalizer such as AudioFX, this will need to be uninstalled/disabled to stop it conflicting with V4AFX, you can use the Debloater Magisk module to do this.
5) Reboot, Launch V4AFX and turn on the Master limiter, check the driver status to verify that it's enabled and processing.
Following these steps ViPER4Android works flawlessly for me on LineageOS :good:
Thankyou hero! :good:
This work perfectly on EvolutionX 4.5 rom! I don't need to restart my phone again to use viper. Thanks mate.
I've tried installing the driver multiple times and can't seem to make it work at all. The only method I've not been able to accomplish is renaming audio_effects.conf to audio_effects.conf.bak as has been recommended for other phones. For some reason, this file will not rename.
it would seem the file is set to be unwritable (I'm not familiar with linux permissions like this, so maybe that can be fixed somehow?). At the very least, Solid Explorer isn't able to do the job, and can't change the rw perms either, as the operation just fails. (I have got selinuxmodechanger changed to permissive and after reboot, but no change here either)
Any other ideas?
Well, for anyone else wanting to know how to make this work, follow this guide here: https://thedroidarena.com/install-viper4android-android-10-q/
Don't use the magisk module for V4A, it doesn't work.
Works great for me now!
I'm using it it works perfect but you have to use the new version not the older one
Sent from my ASUS_I003DD using Tapatalk
Matakor said:
Well, for anyone else wanting to know how to make this work, follow this guide here: https://thedroidarena.com/install-viper4android-android-10-q/
Don't use the magisk module for V4A, it doesn't work.
Works great for me now!
Click to expand...
Click to collapse
I followed the instructions above, but it doesn't work.
Matakor said:
Well, for anyone else wanting to know how to make this work, follow this guide here: https://thedroidarena.com/install-viper4android-android-10-q/
Don't use the magisk module for V4A, it doesn't work.
Works great for me now!
Click to expand...
Click to collapse
Do you still have that apk lying around? XDA Labs does not appear to be working ATM.
bencozzy said:
JamesDSP works
Click to expand...
Click to collapse
I saw that, didn't really know what it did. I'll check it out.
Nothing in JamesDSP is doing anything for me on Speakers, Headphones, or Bluetooth. I think that this may beacause of my failed install of V4A rootless (might work if I had the APK?). Any ideas if this is the problem? If It is, do you know how I might uninstall V4A?
If rooted, try installing latest V4A directly from here (https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx) rather than via Magisk.
I prefer older V4A versions, having tried above.
My preferred V4A is 2.5.0.5 (found in App folder in following .zip from here: https://androidfilehost.com/?fid=673368273298920860)
1. Ensure on latest BusyBox.
2. Install latest V4A from Magisk & download driver, device will auto-restart.
3. Uninstall this latest V4A (don't delete data or cache).
4. Install V4A 2.5.0.5 .apk from above link. Don't open app yet.
5. From Magisk, install Audio Modification Library (choose relevant options). Restart device.
6. Additionally, Magisk install Audio Compatibility Patch. Restart device.
7. Ensure V4A settings FX compatible mode option = Normal.
(Don't optmise V4A in battery settings).
Noticeable improvement in speaker volume (I don't play over BT or headphones, so cannot comment).
elmor0 said:
If rooted, try installing latest V4A directly from here (https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx) rather than via Magisk.
I prefer older V4A versions, having tried above.
My preferred V4A is 2.5.0.5 (found in App folder in following .zip from here: https://androidfilehost.com/?fid=673368273298920860)
1. Install latest V4A from Magisk & download driver, device will auto-restart.
2. Uninstall this latest V4A (don't delete data or cache).
3. Install V4A 2.5.0.5 .apk from above link. Don't open app yet.
4. From Magisk, install Busybox & Audio Modification Library (choose relevant options). Restart device.
5. Additionally, Magisk install Audio Compatibility Patch. Restart device.
6. Ensure V4A settings FX compatible mode option = Normal.
Noticeable improvement in speaker volume (I don't play over BT or headphones, so cannot comment).
Click to expand...
Click to collapse
I uninstalled everythingg I had installed up to that point (everything I could at least), and followed the instructions step by step. Still getting abnormal in the V4A app (at least the app looks cooler now : P). I really don't know what is going on at this point. I might just reset the whole phone and follow your instructions again. I will report back when I get around to that.
Ok, I decided to play around a little before trying a reset; and I installed Viper 4 Android legacy with the APK from the zip you gave me, and it now says audio format supported! Yay! It just says "Processing: no" now. I have a feeling that I have something setup wrong. Any ideas?
Edit: Grammer
You managed to install driver v.2.5.0.5 or latest v4a?
Processing should change to "Yes" whilst audio is playing (music player/ YouTube/ system sounds etc).
Streaming music can be hit & miss; set up Audio Compatibility Patch correctly (via Magisk).
elmor0 said:
You managed to install driver v.2.5.0.5 or latest v4a?
Processing should change to "Yes" whilst audio is playing (music player/ YouTube/ system sounds etc).
Streaming music can be hit & miss; set up Audio Compatibility Patch correctly (via Magisk).
Click to expand...
Click to collapse
I installed driver version 2.5.0.4 with the APK you pointed me towards in the .zip/viperfx/app folder.
I will reinstall the audio conpatibily patch. What options should I choose in the patch?
Edit: I did not install the driver *with* the APK, but alongside it. I installed the driver via ViperFX Legacy in Magisk.
Try the ACP if V4A not working for streaming music apps.
I selected following:
- Skip audio_policy patching? = NO
- Skip notification_helper remover? = YES
- Skip usb policy patching for usb dacs? = NO
- Use lib workaround? = NO
Error-404-Go-Home said:
Edit: I did not install the driver *with* the APK, but alongside it. I installed the driver via ViperFX Legacy in Magisk.
Click to expand...
Click to collapse
That's fine, as long as V4A driver is enabled/ status normal/ format supported/ and it is processing during audio play.
elmor0 said:
That's fine, as long as V4A driver is enabled/ status normal/ format supported/ and it is processing during audio play.
Click to expand...
Click to collapse
It still isn't processing audio : (. I have tried resetting and following your instructions again. The only way I am able to get it to stop displaying "Status: Abnormal" is by installing Viper4Android FX Legacy in the new driver mode with the user app, then installing the Audio Modification and compatibility patch, then restarting and installing the APK you gave me. Even with all that, it will not recognize audio being played (it displays "Processing: No" when audio is very clearly playing and I have effects enabled). I am now considering switching to LineageOS (I would be there already if it wasn't for the fingerprint sensor driver being broken).
Edit: Do you think switching kernels would change anything?
Edit 2: I noticed a toast notification from V4A on startup saying "A running program has requested Android to disable audio effects, so V4A will be temporarily disabled."
I am thinking that maybe the stock Dirac audio processing might be interfering with V4A somehow. Is there anyway to get Viper to ignore requests to disable?
Well, Lineage didn't fix anything (No matter what I did, V4A would not stop displaying abnormal). Took me a little while to get back to stock, but the latest version of V4A is working, but only for the first 30 seconds after reboot before giving me the previously mentioned toast notification. I have removed all apps that are even remotely audio processing related, but still have this problem. Anybody else had something similar? If you did, how did you fix it?
(Also, special thanks to elmor0 for all of your help getting me this far I'm so close)
Edit: Holy shiz it's working! I used the method described in my previous post, but with the added step of uninstalling and reinstalling audio modification library after the last reboot. Again thank you all for your help! And I really hope this helps someone!
Error-404-Go-Home said:
Edit: Holy shiz it's working! I used the method described in my previous post, but with the added step of uninstalling and reinstalling audio modification library after the last reboot. Again thank you all for your help! And I really hope this helps someone!
Click to expand...
Click to collapse
hi
I'm having the same problem for months now
I hear it needs SE Linux to be permissive for V4A to work properly
I had no success on getting that SE Linux to turn Permissive unfortunately
long story short , I found myself here
can you please give me a step by step on how you got V4A to work , that is off course if its still working for you man
I'm at the end of my rope here , any guidance would appreciated ,
Thanx
JimmyMX said:
hi
I'm having the same problem for months now
I hear it needs SE Linux to be permissive for V4A to work properly
I had no success on getting that SE Linux to turn Permissive unfortunately
long story short , I found myself here
can you please give me a step by step on how you got V4A to work , that is off course if its still working for you man
I'm at the end of my rope here , any guidance would appreciated ,
Thanx
Click to expand...
Click to collapse
I ended up refllashing with Lineage and installing this: https://forum.xda-developers.com/t/app-fix-100-working-viper4android-for-android-11-devices.4213647/
That version has worked flawlessly for me for Android 10 and 11.
Good luck!
All features are working. If you follow the process as described, viper4android works fine on YouTube and all platforms. Moreover, it eliminates the problem of voice reduction when forwarding videos.
Tested PE PLUS (A10) and PE (A11) OFFİCİAL
Before you start installing the Sound Mode, install the SELINUX PERMİSSİVE file with MAGİSK and restart the device.
FOLLOW THE PROCEDURES IN THE ORDER
1. Install the Viper4Android FX zip file with Magisk and
Open the Viper4Android FX application and install the driver and restart.
2a. Install the Audio Modification Library file with Magisk.
2b. Install the Audio Compatibility Patch file with Magisk. ---> Options will be as below.
Volume UP - Volume UP - Volume DOWN - Volume DOWN - Volume DOWN
Restart the device.
3. Open the Viper4Android FX application and activate LEGACY MOD in settings.
DONE.
(FOR SETTİNG FILES)
VIPER4ANDROID_DDC-KERNEL-PRESET FOLDER
---> Copy to folder Android / data / com.pittvandewitt.viperfx / files.
MY SETTİNG FOR HEADPHONES and SPEAKER ---> Viper4Android_DDC-KERNEL-PRESETS File
FİLES :
https://www.dosyaupload.com/ou0i
https://www.dosyaupload.com/ou0k
https://www.dosyaupload.com/ou0l
https://www.dosyaupload.com/ou0m
https://www.dosyaupload.com/sH1O
Update ---> DDC-KERNEL-PRESETS
First of all i want to thank you for the clear and detailed guide...
i have few questions tho, is there any way to install without switching SELINUX to permissive?? my concern here are the security issues
also can i add ainur narsil along with V4a, or is it even worth it?! if yes then what the installation process would be??
thank you in advance!
Obito_Sama said:
First of all i want to thank you for the clear and detailed guide...
i have few questions tho, is there any way to install without switching SELINUX to permissive?? my concern here are the security issues
also can i add ainur narsil along with V4a, or is it even worth it?! if yes then what the installation process would be??
thank you in advance!
Click to expand...
Click to collapse
Unfortunately viper doesn't work properly without selinux permissive.
You can try different sound modes. however, problems occurred when I tried it on pe +. Also I don't think an extra sound mod will be needed after making good adjustments with the viper.
ryukseloglu said:
Unfortunately viper doesn't work properly without selinux permissive.
You can try different sound modes. however, problems occurred when I tried it on pe +. Also I don't think an extra sound mod will be needed after making good adjustments with the viper.
Click to expand...
Click to collapse
Somehow v4a works fine with selinux enforcing on my xz premium, less headache for me
This is a guide to install mods for OP6/6T that achieve a dual speaker setup that's like the device has stereo-like speakers. I have helped many OP6 and 6T users to achieve this.
Custom ROMs that work with this mod (TESTED):
Stock Oxygen OS
AOSP Extended
ArrowOS (OP6 only)
CrDroid
Evolution X
KangOS
Pixel Experience
PixenOS (EOL)
SyberiaOS
Disclaimer:
*I am not responsible for bricked devices, damage to your device*
I am here to post my method for anyone who is interested. I have tested this myself and helped others to do this.
Issues:
There are issues with the SElinux manager installation and setting SElinux to permissive in my experience. There are alternatives and modules that can be trusted. I have provided links that I have tested and the best module that sets SElinux is the SElinux permissive module. There are SElinux manager modules, but they don't consistently work or install. Like V1.0 doesn't work, try V1.0.5 or vice versa.
IMPORTANT:
Old:
Setting SElinux can have security issues noted by @topjohnwu, so install this mod at your own risk.
Unfortunately, I have not found any method that installs Dolby atmos with SElinux Enforcing and all mods from reiryuki don't work on 6T (OOS 10.3.8). You can try yourself, but backup beforehand as it causes bootloop.
Any other method I found re-uses repey6 and installs it wrong (without setting SElinux)
The alternative module I have found is Viper4Android and can be installed with SElinux Enforcing
New:
Dolby Digital Plus now has released a new version that works with SElinux Enforcing.
Viper4Android is outdated sadly. But There' Viper4Android RePackaged
Methods:
The method works on OOS work on Custom ROMs as well
Download the files required from the links provided and choose Dolby or Viper
Install dual speaker mod and reboot
The OP6 will have many versions that don't install after rebooting so repeat this step until you've installed a version successfully V10 works in my experience. For the Oneplus 6T V3 works.
3. Test it to see if it works and check if it has installed in magisk modules
Dolby Digital Plus Method:
OLD:
Install Dolby digital plus and reboot.
Test it to see if it works and check if it has installed in magisk modules
Install SELinux permissive to set SELinux to permissive and reboot. You need to set SELinux to permissive to make the Dolby mod work properly.
Go into magisk modules to check if SELinux permissive module is installed. If it wasn't installed try another module like SElinux manager 1.0 or 1.0.5 if one of them didn't work, try 1.0 vice versa or the SElinux changer APK. Reboot and check in magisk modules again.
Install audio modification library, reboot, and done.
NEW:
Install Dolby digital plus and reboot.
Test it to see if it works and check if it has installed in magisk modules
Install audio modification library, reboot, and done.
Fix for Dolby:
The next issue is with Dolby digital plus. If the speakers sound quieter than normal and the app stopped working...
Go into settings, app settings, find Dolby app.
Go into permissions. Turn storage on and off.
Try it again and the issue should be fixed.
Enjoy
There is an alternative to Dolby atmos and it is Viper4Android where SElinux is enforcing as well
Viper4Android Method:
OLD:
With the old V4A module
Once you got dual speaker mod installed
Install Audio Modification Library, reboot and disable it
Install the viper4Android module.
If a new version of viper4Android module is available, install that
Reboot.
Open the app and grant root
Install drivers in the app and it will reboot automatically
If u want to have DDC, kernel and preset files look at the DDC, kernel and preset files manual method below
NEW:
With the new V4A Repackaged module
Once you got dual speaker mod installed
Install Audio Modification Library, reboot and disable it
Download and extract the guide setup or the other .zip file attached below on your device
Install the viper4Android Repackaged module.
Reboot
Open the app and grant root
DISCLAIMER: On custom ROMs or certain devices, the drivers are installed, but NOT working properly after reboot. Just continue the method and comment if there are issues once u have finished the method.
DDC, kernel and preset files manual method
Download and extract all the V4A files or just the file for this guide setup I attached below. You need the DDC, Kernel and Preset folders. Copy all the folders!
In Internal Storage: Copy and paste the folders into (Android -> data -> com.pittvandewitt.viperfx -> files), this would replace each folder.
Now go into magisk manager, go into modules and enable AML. Reboot
Now make sure V4A driver is running (read Notes) and go into convolver -> impulse response. Choose any kernel, and done. OR choose the preset for that and done. If you have issues, make sure legacy mode is on in settings but it is on by default.
Choose at your heart's desire if you downloaded all the V4A kernels.
I personally use Dolby Digital Plus - Centre kernel
Done, also post the settings or kernels and your thoughts.
I also attached a screenshot of my configuration
Note: Viper4Android sometimes doesn't turn on properly. So, play music and open the app to check the driver. The Driver status if it's working (NEON enable: yes, Enabled: yes, Status: Normal) and turn on the master limiter to see if there's an effect. This should give you an indication if V4A is working or not
I have attached DDC files below and you do the same thing with kernel files, but they are used for headphones.
You can try and add the preset (profiles). BUT U SHOULD HAVE ALL THE DDC AND KERNEL FILES FOR THE PRESETS TO WORK PROPERLY
Choose the specific presets u want
Transfer them into Android -> data -> com.pittvandewitt.viperfx -> files -> presets
Transfer the V4A.zip in internal storage
Reflash the V4A.zip again and reboot
Install the V4A driver again and reboot
V4A driver should be working, check the presets and it should be there
Enjoy having your presets
Fix for V4A:
There has been noted issues during the installation with V4A. If you experienced a bootloop after installing V4A in magisk...
Boot into TWRP, -> advanced -> file manager -> data/abd/magisk/modules and delete the V4A folder.
Reboot to system, install the module in magisk again and reboot. It should install.
Another issue was that V4A driver is installed properly, but there are no enhancements to the sound. To fix this, go into settings and turn on legacy mode. This should make the effect stay on, even though this should be on anyways.
New Update V4A
Also, for new users if u connect your earphones like via headphone jack, USB-C or Bluetooth. You can tweak those as well than just your SPEAKERS! BUT some earphones can be damaged as well, so tweak at your own risk.
After much tweaking myself. I think I have made my speakers much better and achieved almost stereo speakers for my 6T.
I have attached a screenshot to the thread at the bottom. I have attached a screenshot for my headphones too!
I have added the individual settings as well. If u want to tweak them just press the text and it should expand.
The toggles I have on are for my speakers:
Master Limiter
Playback gain Control: Strength: 2, Maximum gain: 3X, Output threshold: -1.9dB
Convolver: Dolby Digital Plus - Centre, Cross Channel 100%
Speaker optimization
I have also tweaked my Bluetooth earphones as well with a DDC and the screenshot is attached below. I recommend Dolby headphone Live, but that's up to you.
U can add files in the DDC folders in the Android folder, but reboot and then tweak to see the difference. U CAN RISK DAMAGING IF U TWEAK TOO MUCH
You have completed the guide and can now experience dual/stereo-like speakers on your OP6/6T.
Enjoy
If anyone has any issues with this guide. Post a message and I'll get back to you
Links:
Modules required
Oneplus 6T dual speaker module Link
OnePlus 6 dual speaker module V10 Link
Download Dolby + SElinux files if u want Dolby Digital Plus installed
Dolby Digital Plus module Link
SElinux modules are no longer needed for Dolby Digital Plus
SElinux Permissive module Link
SElinux Manager V1.0 Link
SElinux Manager V1.0.5 Link
Audio Modification Library Link
Download Viper4Android and one of the preset files if u want Viper4Android installed
Viper4Android Module (OLD) Link
Viper4Android Repackaged Module (NEW) Link
All Viper4Android preset files Link
Viper4Android files for this guide is attached below
All DDC, Kernel, and Presets in one zip is attached below
Threads where the modules are from
OnePlus 6T dual speaker thread Here
Oneplus 6 dual speaker thread Here
Dolby Digital Plus thread Here
SELinux Manager thread Here
SELinux Permissive thread Here
Audio Modification Library Thread Here
Credits:
@voske15 for his Dolby Digital plus module
@repey6 for his thread and guide to install the Dolby Digital Plus module (9.0 - 11.0)
@acervenky for his module to allow dual speakers for the OnePlus 6 and OnePlus 6T
@evdenis for the SElinux permissive module
@Jman420 for his SElinux manager V1.0 and V1.0.5 module
@Zackptg5 for his Audio Modification Library and Viper4Android module
@Vimal Vinz for the V4A DDC + Kernel + profiles
First reply. I have used this method for years and honestly love it! My speakers sound amazing and I can't use my 6T without this installed
This works like a charm, everything you said if followed then you should have no issues at all. Its a great guide and very helpful. Thanks mate
Update Log:
5/06/2021 - I have attached the presets which I use for my speakers and earphones.
If u have already installed V4A without the presets follow this new method.
Download the .zip file of my attached presets or all the presets
Choose the specific presets u want
Transfer them into Android -> data -> com.pittvandewitt.viperfx -> files -> presets
Transfer the V4A.zip in internal storage
Reflash the V4A.zip again and reboot
Install the V4A driver again and reboot
V4A driver should be working, check the presets and it should be there
Enjoy having your presets
2/11/2022 - Updated XDA thread as new Viper4Android Repackaged was found and supports Android 13
3/2/23 - Updated the method Viper4Android method as repackaged installs the DDC, Kernel and preset files during installation.
So, u can just download and extract the compressed .zip file into internal storage and V4A will install the files for you during installation.
I got this install failed during viper4android module installation. after reboot, it asked me to update and install the module, but after that i still don't see the app to grant permission. I'm using crDroid on a Samsung a22. audiofx is disabled
nptoonix said:
I got this install failed during viper4android module installation. after reboot, it asked me to update and install the module, but after that i still don't see the app to grant permission. I'm using crDroid on a Samsung a22. audiofx is disabled
Click to expand...
Click to collapse
Well your device is a Samsung which may act differently to the Viper4Android installation. This guide is for OnePlus 6/6t. The app should still work, but not sure for your device
I have installed the latest build 9.16, but it seems DASH charge and face unlock is not available, does anyone knows what's going on???
fengjc said:
I have installed the latest build 9.16, but it seems DASH charge and face unlock is not available, does anyone knows what's going on???
Click to expand...
Click to collapse
Wrong thread. Idk what you're going on about. What 9.16 build? You can't just go one any thread and post issues. Especially with no context
Love the presets! Mainly use the viper-DDC stuff I have had DDP &V4A installed for quite some time on a HD1925 OnePLus 7tpro McLaren with LOS17.1,
I am also going to try the Dolby fix, normally when I am using an app like tiktok or something like that & get a phone call it kills DDP 7.3 and I normally have just been rebooting. If the fix works ill create a tasker profile to automatically reset it!
Great tutorial! Thank you for the time
Dolby fix works perfectly! Thank you for that tip!
Bradford1040 said:
Love the presets! Mainly use the viper-DDC stuff I have had DDP &V4A installed for quite some time on a HD1925 OnePLus 7tpro McLaren with LOS17.1,
I am also going to try the Dolby fix, normally when I am using an app like tiktok or something like that & get a phone call it kills DDP 7.3 and I normally have just been rebooting. If the fix works ill create a tasker profile to automatically reset it!
Great tutorial! Thank you for the time
Dolby fix works perfectly! Thank you for that tip!
Click to expand...
Click to collapse
I wouldn't recommend using the dolby and I have said why. "Setting SElinux can have security issues noted by @topjohnwu, so install this mod at your own risk." Here's an article: https://www.techrepublic.com/article/why-its-time-to-stop-setting-selinux-to-permissive-or-disabled/
In the long term, V4A is the better choice especially when SElinux doesn't really affect it and it works on SElinux Enforcing. Dolby kinda works on SElinux Enforcing but enjoy dealing with multiple crashes
Extreme_Ninja2099 said:
I wouldn't recommend using the dolby and I have said why. "Setting SElinux can have security issues noted by @topjohnwu, so install this mod at your own risk." Here's an article: https://www.techrepublic.com/article/why-its-time-to-stop-setting-selinux-to-permissive-or-disabled/
In the long term, V4A is the better choice especially when SElinux doesn't really affect it and it works on SElinux Enforcing. Dolby kinda works on SElinux Enforcing but enjoy dealing with multiple crashes
Click to expand...
Click to collapse
Not sure why but I have never had to set Selinux to permissive but Dolby still works, thank you for the warning though, I would not have used if I had to
I do not deal with multiple crashes in fact, just when using tiktok and get a call I need to turn V4A off and on & Dolby I have to apply the above fix which I have set a Tasker autoinput profile now to do both automatically
Everything is okay with v4a but Second speaker turns off at max volume. Probably i should decrease default speaker gain(
GR4V17Y said:
Everything is okay with v4a but Second speaker turns off at max volume. Probably i should decrease default speaker gain(
Click to expand...
Click to collapse
Which device do u have? The 6T works flawlessly not sure for the OP6. Tbh I have attached profiles in the guide_setup .zip file and the profiles in there work fine
Followed this guide for my OP6 running LOS 19.1. I used v10 stereo mod with latest Dolby Digital Plus and AML modules. It works but it's not true stereo. When playing a stereo content, left channel is coming to both earpiece + loudspeaker and right channel is coming to ear piece alone. Tested using stereo test videos on YouTube. Is there anything I'm missing here? Probably due to LOS or Android 12. Left channel output seems to be a problem.
Nihal @A-JAX said:
Followed this guide for my OP6 running LOS 19.1. I used v10 stereo mod with latest Dolby Digital Plus and AML modules. It works but it's not true stereo. When playing a stereo content, left channel is coming to both earpiece + loudspeaker and right channel is coming to ear piece alone. Tested using stereo test videos on YouTube. Is there anything I'm missing here? Probably due to LOS or Android 12. Left channel output seems to be a problem.
Click to expand...
Click to collapse
Ofc it's not true stereo as the manufacturer will have to do that. But it's "stereo like" so u have 2 speakers instead of one like newer phones that have stereo speakers. But it's better than not having it
New Update
Guide has been updated for Android 13 and using the new Viper4Android Repackaged module