Related
[ROM][I9100G][6.0.1] LineageOS 13.0 [UNOFFICIAL][Galaxy S2G]
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 Marshmallow, which is designed to increase performance and reliability over stock Android for your device.
This is an UNOFFICIAL build of LineageOS 13.0 for Samsung Galaxy S2 G (I9100G). It's build from sources on github.com/cyanogenmod & github.com/xdaamg. Standard functionalities are working, when you follow flash instructions. Android 6.0.1 is running smooth on this device. Please read 'problems and not working'-section before you flash this ROM.
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices, dead SD cards and so on. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Confirmations of working things are welcome. If you found a bug, provide a logcat and description of it.
Click to expand...
Click to collapse
First time installation instructions:
Backup your media files (photo, music, downloads) stored on internal storage
Download LineageOS i9100g ROM, OpenGApps (ARM, Android 6.0, Stock) and .gapps-config.zip (details see below) to your sdcard. Extract .gapps-config.zip to same place as your opengapps file on sdcard, usually root of sdcard.
Boot into TWRP Recovery. If you don't have TWRP 2.8.7.0, flash TWRP and reboot into twrp recovery. Then wipe system, data, internal, dalvik and cache.
Flash LineageOS 13.0 rom and OpenGApps Stock with .gapps-config file. It will install opengapps nano and replace aosp keyboard with google keyboard. Reboot system and follow instructions in setup wizard. After finishing all, reboot again.
To get root access, download su-arm-i9100g.zip and flash it in twrp recovery
Set default phone app, before you make your first call. Go to "Settings/Apps/Advanced/Default Apps/Phone App" and set it to "Phone".
Updating Lineage 13.0 ROM:
Download Lineage 13.0 i9100g ROM to your phone
Boot into recovery and install LinageOS 13.0 i9100g ROM and reboot system
Download I9100G LineageOS 13.0 ROM UNOFFICIAL:
Download i9100g LineageOS 13.0 20180131
Support development of this rom:
If you find this rom useful, consider donating please. Your donation helps to keep this rom alive and is your chance to support development.
Download Google Apps:
Open GApps (recommended: ARM, 6.0, Stock (Download))
Download .gapps-config file:
Download .gapps-config
Download root 'su', flash with twrp and activate under 'developer settings':
Download su-arm-i9100g.zip
Download su-arm-i9100g-remove.zip
Status:
Android-Version: 6.0.1 (R81)
LineageOS-Version: 13.0
Security patch level: 01.01.2018
Kernel-Version: 3.0.31
SELinux: permissive
Standard functionalities working:
Telefon, sms, wifi, data 2g/3g, grafics, sensors, compass, location, camera, flashlight, vpn, wifi hotspot, playstore.
Special features:
TWRP IsoRec: Booting TWRP from recovery partition + supports booting TWRP 3.0+ build for i9100 device
F2FS: Flash-friendly file system supported (data, cache, sdcard)
zram support: virtual swap compressed in RAM
Best standby times by supporting app standby (doze)
Higly responsive, smooth gui
First i9100g android 6.0 rom and only one which still gets updates
Changelog LineageOS & i9100g device tree:
Lineage 13.0 changes
20170609: Upgrade CyanogenMod 13.0 to LineageOS 13.0
20170611: Touchkey Backlight fixed
20170922: Updated sources to latest Android 6.0.1 R80; Security fix in kernel: net/bluetooth to fix 'blueborn' problem
20171024: Updated sources to latest Android 6.0.1 R81; Security fix in kernel: net/mac80211 to fix wifi security problem; security fixes in wpa_supplicant to fix wifi wpa2 connections
20171226: november/december 2017 android security fixes; various lineage os changes
20180131: January 2018 android security fixes; hardware_ti_omap4 changes
Not supported:
Manual selection of network carrier is not supported -> use automatic network search
Snap camera supports picture and video recording. Panorama mode is not supported (but working with some other camera apps). Digital zoom is not supported.
Some display features are not supported, for example 'night mode'
Problems and/or not working:
Sound distortions with some codecs and sample rates. In some situations or with some codecs, sound/ringtones etc. sounds like with some kind of electronical effect. -> try different equalizer settings or use cm12.1, if audio quality is not accectable for you
GPS does not find enough satellites to get a location fix -> use cm-12.1 if you need this feature. This bug could be solved by replacing proprietary libstlport.so with opensource external libstlport.so, but this breaks simcard detection.
When you found a bug/error/problem, post a logcat with description. Postings without these informations are likely to be ignored.
FAQ/Solutions:
Root: To get root access, download su-arm-i9100g.zip and flash with twrp. Then go to settings/about phone and touch build-number seven (7) times. This will activate developer settings. Then go to settings/developer settings/root access and set it to apps only or apps and adb.
Recovery: LineageOS 13.0 comes with Cyanogen Recovery by default. But this rom supports booting IsoRec TWRP recovery. If recovery is not working, enter 'download mode' and flash a new recovery via odin, for example TWRP 2.8.7.0.
Bluetooth connections to headsets, speakers -> When you have connection problems try to disable battery optimisations for your audio app: go to settings/battery, select menu on top right and choose 'optimisation', in dropdown menu choose 'all applications' and select your music player app (for example cyanogenmod eleven), select 'not to optizime'. Reboot after you set this option.
Android security patch level: Google releases monthly security updates. Security bulletin is split into different security patch levels. Relevant for i9100g lineage 13 is only first part of this bulletin, for example patch level 2017-05-01, with changes in aosp source code. These issues gets fixed with an updated lineage 13.0 rom. Other issues mentioned in drivers and kernel are device specific. We could be affected by this errors or similar bugs, but only manufactor of this hardware could update (driver) binaries (and they don't care about old devices). The same with kernel bugs, i9100g kernel could be affected by this errors too, but there are no active kernel developers for this device and so these problems will often stay unfixed.
Galery app: If galery app does not display all your albums/pictures/video for example of your sdcard: Open file explorer and search for a file '.nomedia' on your sdcard root/picture/video folder. If it's there, delete it. It tells android not to index this folder. Then make a new folder on your sdcard, for example 'media'. Move your pictures/videos/music to your new media folder. Mediascanner will scan these files automatically now and they should be visible in gallery app.
Optimisations:
Low app space: If you are low on app data storage, think about repartitioning your phone storage. 4 or 6 gb should be sufficient even for many apps. Follow instructions in this thread. Alternatively use Lanchon Repit Tool.
Battery: Display and data connections/syncing use most energy. I suggest to reduce display brightness to a minimum or switch off adaptive brightness. Also switch off background data connections/syncing for apps you don't use or which will be updated when you really use it.
After first flash give phone some extra time to complete all tasks, even when it's reacting already to your inputs, it's working hard. Wait some minutes. It's also a good idea to do another reboot after some time. This solved some problems in the past.
Force closes: If you are experiencing force closes try first to clean cache/dalvik cache in recovery. If it's still not working, go to settings/apps, find the offending app and clear data. Still no solution? Then do a clean flash with factory reset and re-install apps without importing backups.
TWRP Recovery only signed (recovery, without lineageos):
Download TWRP 2.8.7.0 Recovery only signed
Download TWRP 2.8.7.0 Recovery only signed TAR for Odin
Lineage 13.0 ROM archive (outdated, you should only use it, if latest build is not working for you):
Download i9100g LineageOS 13.0 20171226Download i9100g LineageOS 13.0 20171024
Download i9100g LineageOS 13.0 20170922
Download i9100g LineageOS 13.0 20170712
Download i9100g LineageOS 13.0 20170611
Download i9100g LineageOS 13.0 20170609
XDA:DevDB Information
I9100G LineageOS 13.0 Android 6.0.1, ROM for the i9100
Contributors
adxamg
Source Code: http://github.com/xdaamg
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 20180131
Beta Release Date: 2018-01-31
Created 2017-06-11
Last Updated 2018-02-01
Reserved
New build online, lineage 13.0 i9100g 20170611.
Change:
- Touchkey backlight fixed and working normally again
I miss this device, thanks OP for keeping this device alive.
Thanks Man YOU ARE GREAT.
thanks for the new ROM.
Great job!
Any way we could help in pinning down the issue with the libstlport.so open source version which would fix the GPS issue? Probably only with coding knowledge?
Gesendet von meinem SM-G930F mit Tapatalk
McConnor said:
Great job!
Any way we could help in pinning down the issue with the libstlport.so open source version which would fix the GPS issue? Probably only with coding knowledge?
Click to expand...
Click to collapse
All sources are on github. Everyone interested could support the process of fixing issues, by modifying sources, building a new rom, flashing, testing.
Mobile Network not working
hui guys, flashed rom succesfully.. but internet navigator can't detect mobile network.. no internet
Le-Rouge said:
hui guys, flashed rom succesfully.. but internet navigator can't detect mobile network.. no internet
Click to expand...
Click to collapse
Hi, had the same issue, maybe this can fix it: change in APN-settings values for "APN protocol" and "APN roaming" from "IPv4/IPv6" to "IPv4".
BR
Ok. I will try n give a feedback
Thanks ledseppelin its ok now.. just refreshed ipv4 entries in apn config
i will download it
and review
but please put some screenshots in Thread
Uploaded a new lineageos 13.0 build 20170712.
Change: Latest android security patch level: July and June aosp patches.
adxamg said:
Uploaded a new lineageos 13.0 build 20170712.
Change: Latest android security patch level: July and June aosp patches.
Click to expand...
Click to collapse
see my private massage please
Hi @adxamg
Please help me with kernel Compiling! I downloaded everything (CM11_Kernel + GCC_4.7) needed for kernel Compiling.
The only thing that i don't have is "Initramfs".
So PLEASE PLEASE PLEASE Tell me what should i do? were to get it?
This is the 2nd time i ask.
AhmAdDev99 said:
Hi @adxamg
Please help me with kernel Compiling! I downloaded everything (CM11_Kernel + GCC_4.7) needed for kernel Compiling.
The only thing that i don't have is "Initramfs".
So PLEASE PLEASE PLEASE Tell me what should i do? were to get it?
This is the 2nd time i ask.
Click to expand...
Click to collapse
I don't care how many time you ask.
Learn how to compile yourself. cm11 is old, you may need an older environment to compile it. sun java6 for example, which is not supported any longer. You will run into some problems, when you want to compile cm11 today.
What are the known bugs in this ROM?
A QUESTION DIRECTED THE THOSE WHO TESTED IT
Just installed the ROM today. Gave my old I9100G a new lease of life. It's working perfectly fine. Thanks to @adxamg !
Hope this ROM continues to get updates.
low system space
I get the message "insufficient storage space available in System partition" when installing Open Gapps. I tried the stock version. Something to do about that?
LineageOMS for Xiaomi Mi 5s (capricorn)
aka LineageOS 14.1 bundled with substratum & OMS
PSA: LineageOS 14.x is dead. Please switch to LOS 15.x. This ROM is no longer updated.
Unofficial ROM built by iamnotstanley (me). Updates every Tuesday.
This is a pure LineageOS 14.1 based ROM with full OMS and substratum theme engine support. Today the LineageOS 14.1 doesn't support any theme engines by default, and this ROM fixes it.
I'm only including the latest OMS commits for Nougat and the latest substratum theme engine apk from apkmirror.com.
Working:
Everything
Working OTA updater with OTA server (please share feedbacks about the download speeds, download stability, etc.)
Bugs:
Same as in LineageOS 14.1, OMS & substratum
Downloads:
Builds
GApps (opengapps.org) Recommended: ARM64 - 7.1 - nano
LineageOS extras
MIUI firmware update zips Requirement: MIUI 8.1.4 or newer firmware
Sources:
LineageOMS for capricorn (my own repos)
substratum
LineageOMS
LineageSubstratum
LineageOS
Xiaomi vendor blobs
XDA:DevDB Information
LineageOMS | LineageOS 14.1 bundled with substratum & OMS, ROM for the Xiaomi Mi 5s
Contributors
iamnotstanley, LineageOS team, substratum team, MJPollard, nathanchance
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: MIUI 8.1.4 dev firmware (LOS14.1 requirement)
Based On: LineageOS 14.1
Version Information
Status: No Longer Updated
Created 2017-11-07
Last Updated 2018-03-03
Screenshots
Changelog:
2018-01-10
+ upstreamed LOS source
+ updated Substratum apk: v914 -> v931
* MIUI 8.1.4 or newer firmware required
2017-11-14
+ upstreamed LOS source
+ updated Substratum apk: v912 -> v914
* uploading sha256 checksums besides md5 checksums from now
2017-11-08
+ working OTA updater
+ upstreamed LOS source
2017-11-07
* first build
- no OTA updates
Cool rom bro thanks....will check it these days
What method did you use to build? Cherry pick or the provided manifest? I had problems with the latter when I tried.
Edit: I see you manually merged them. Good job.
mesziman said:
What method did you use to build? Cherry pick or the provided manifest? I had problems with the latter when I tried.
Edit: I see you manually merged them. Good job.
Click to expand...
Click to collapse
Yes, I tried with the merge_script, but it failed because the outdated LineageSubstratrum repos, so I merged it manually. It was easier than fixing the merge_script somehow, and now it's perfectly fits to my build script.
New build!
2017-11-08
+ working OTA updater
+ upstreamed LOS source
It is Tuesday so new build and an another bump post!
2017-11-14
+ upstreamed LOS source
+ updated Substratum apk: v912 -> v914
* uploading sha256 checksums besides md5 checksums from now
(from next week I won't post changelogs to separate posts, only to the reserved post in the top)
By the way anyone using this ROM now or just me? I keep updating this, I just wrote a little patcher script for the easier and more automated ROM building. (Later I'll migrate to a LineageOMS + microG ROM, if anyone want I can share that too, but with the right resources it is very easy to build it for yourself.)
Thanks @iamnotstanley, this rom is pretty good, used it for almost 1 month and still no problem so far :3
Btw, i just saw some OTA update notifications, should i update it? Won't it wipe my personal data ? (tho i do backup before, but.... restore them is really painful =_= )
Dark Hunter said:
Thanks @iamnotstanley, this rom is pretty good, used it for almost 1 month and still no problem so far :3
Btw, i just saw some OTA update notifications, should i update it? Won't it wipe my personal data ? (tho i do backup before, but.... restore them is really painful =_= )
Click to expand...
Click to collapse
Thanks for the feedback!
I release a new build every week (you can look at the LOS14.1 technical changelog here). I recommend to make a full nandroid backup with TWRP and update the rom. It won't wipe your personal data, it's like any other OTA update, it'll only wipe your system partition, so if you have Magisk or any other mod you'll need to flash it again.
iamnotstanley said:
By the way anyone using this ROM now or just me? I keep updating this, I just wrote a little patcher script for the easier and more automated ROM building. (Later I'll migrate to a LineageOMS + microG ROM, if anyone want I can share that too, but with the right resources it is very easy to build it for yourself.)
Click to expand...
Click to collapse
I'll be installing as soon as I got unlocking finished. Thanks for your work!!
Regards
Dark Hunter said:
Thanks @iamnotstanley, this rom is pretty good, used it for almost 1 month and still no problem so far :3
Btw, i just saw some OTA update notifications, should i update it? Won't it wipe my personal data ? (tho i do backup before, but.... restore them is really painful =_= )
Click to expand...
Click to collapse
Please, what is the name of that sub theme in screenshot?
rhyme4u12 said:
Please, what is the name of that sub theme in screenshot?
Click to expand...
Click to collapse
It's StreamLined theme.
Thank you for your work!:good:
Ths you!!!
Sent from my MI 5s using Tapatalk
I see new version i available but OTA don't see anything.
dariusz666 said:
I see new version i available but OTA don't see anything.
Click to expand...
Click to collapse
Thanks for the report. Well, I'm always upload the builds to my OTA server as soon as I built them.
I tested the updater on my device, and the response is a bit slow (mainly because the OTA server software that I'm using), but working, and the download speed is fine for me.
If it happens again, wait a few minutes and try again or download it from sourceforge.
EDIT: I think I solved this response lag issue. Now the OTA update check is much faster for me than before.
Yes. Everything works fine and download very fast. Great job.
:good:
Just uploaded the new weekly build. You'll need to update the firmware to version 8.1.4 or newer before updating to this build. You can download it from fjtrujy/capricornCNFirmware repo.
Also sorry for the OTA server downtime, I had issues with my domain service, but I already fixed it.
I'll update my RR build tomorrow, sorry for the late updates, I don't really have time this week.
By the way, I started using Telegram again, if anyone wants to send me a message about anything, you can do it there.
How is battery?
francesco0597 said:
How is battery?
Click to expand...
Click to collapse
I think it's very good. There isn't much change in the code so nearly same in the official LOS14.1. I can achieve 5-7 hrs of sot with the stock kernel and day-to-day usage.
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
This is a fully custom ROM for the Huawei Mate 9, derived from the AOSP Pie device tree for the HiKey960 development board, with minimal usage of the existing Huawei vendor stack.
This ROM does include Gapps for Pie.
IMPORTANT: See the broken features below. Most importantly: Phone and cellular is currently entirely non-functional, as there is no RIL implemented. If I can get away with it, I'm not importing code from Huawei's existing vendor stack. The graphics stack is fully sourced from the HiKey960 development board sources, as provided by Google on the Driver Binaries page for AOSP; the only blobs which are sourced directly from the Mate 9 system images are the device firmware blobs from /vendor/firmware.
Working features:
Basic graphics hardware acceleration & 3d support.
Wifi
Bluetooth (partial: kernel wakelock permanently held, preventing deep sleep. Generally functional, you will need to bring over your MAC address and configure it yourself.)
Touchscreen
Notification LED
Screen brightness
USB
Fast charging
Vibration
Battery information
Broken or not hooked up yet:
Reboot / shutdown: always cycles to eRecovery. (BFM is disabled, so the loader doesn't know that boot was successful.
Audio via wired headset, earpiece, speaker. (Bluetooth audio works. Over USB-C, untested.)
Cellular. (No RIL yet.)
SD card.
Camera
Fingerprint sensor
NFC
Any and all sensors.
GPS
More that I have yet to list, I'm sure.
Installation Instructions
Make note of your bluetooth hardware address.
Factory reset your device, preferably using stock recovery. TWRP builds will not work once this ROM is installed.
Install the kernel, ramdisk, and system image with fastboot.
Boot the system
Once booted: adb shell setprop persist.service.bdroid.bdaddr <your bluetooth hardware address>
Notes
The image is pre-rooted (it is an AOSP "eng" build). ADB is on by default, running as root, with no authentication.
Even though it is pre-rooted, I still recommend installing Magisk for the time being. Use the ramdisk image provided here with "Patch Boot Image". Magisk 17.1 with Magisk Manager 5.9.1 work. (Installing Magisk also works around a few other issues - for example, Developer Options is completely inaccessible on the default install.)
Changelog
2017-09-03: Initial release.
Download
GitHub release
Thanks
@wirmpolter for the Serenity kernel (which is used as the basis for the kernel image)
@TheHitMan for BiTGApps Pie
Sources
ironydelerium/device_huawei_mha on GitHub
ironydelerium/vendor_huawei_mha on GitHub
ironydelerium/Serenity on GitHub
XDA:DevDB Information
Custom AOSP Pie for Huawei Mate 9, ROM for the Huawei Mate 9
Contributors
irony_delerium, wirmpolter
Source Code: https://github.com/ironydelerium/device_huawei_mha/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Alpha
Beta Release Date: 2018-09-03
Created 2018-09-03
Last Updated 2018-09-03
Reserved
Reserved
Wooohoo .. is amazing .. more roms .. thanks .. dev ..?
You are amazing Man. I hope you will do it fully functional as soon as. Thanks bro.
Thank you much.
I tried this ROM. But too much bugs. I had to roll back to original EMUI ROM.
Hope you can fix the bugs in future.
Thank you very much for your efforts anyway.
luyongfeng said:
Thank you much.
I tried this ROM. But too much bugs. I had to roll back to original EMUI ROM.
Hope you can fix the bugs in future.
Thank you very much for your efforts anyway.
Click to expand...
Click to collapse
I'm planning on it.
There's a lot of work to do - cellular, audio, basic sensors, camera - none of those things are even there yet.
What's there works, unfortunately as you can tell, that's not a lot yet.
Are you still working on the rom? Any progress? tried to build lineage?
I am still working on it.
Not even considering Lineage at this point - just trying to get a complete device tree constructed, of which there are a lot of pieces to construct (not the least of which because I'm basically building it up from scratch, instead of using Huawei's vendor image).
Development in Kirin is very difficult. So far only see aosp rom in Honor 8 pro based on 7.1. Which is very similar to Mate 9
2018-10-02: It is my pleasure to announce, together with @Quallenauge and @matshias, the availability of unofficial LineageOS 16 builds for the Lenovo Yoga Tab 3 Plus devices (YTX703F and YTX703L).
2019-03-12: And now official lineage-16.0 builds as well!
Issues
Audio over Wi-Fi Display is transmitted at the speed of sound, instead of speed of light
Flashing over anything else (official Lineage 15.1 etc) is not supported - data wipe is required. Working on 2 migration packages: unofficial <-> official and 15.1 <-> 16.0
Double tap to wake (dt2w) does not work too well over long term and I don't recommend enabling it - only added to build per user request
Official Instructions
LineageOS wiki: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Migrating from Unofficial 16.0 to Official 16.0
Boot to TWRP
Install Lineage OTA zip
Install the provided migration-to-official.zip
Reboot from TWRP to system
Migrating from Official 15.1 to Official 16.0
Boot to TWRP
Wipe system partition. This step is critical. User data is not lost when system partition is erased.
Install Lineage OTA zip
If you had OpenGapps in 15.1, then you must install new OpenGapps for ARM64 for Android 9.0. If you didn't have OpenGapps in 15.1, you must not install any Gapps package.
Reboot from TWRP to system
Migrating from Official 16.0 to Unofficial 16.0
Boot to TWRP
Rename the provided migration-to-official.zip to migration-to-unofficial.zip
Install Lineage OTA zip
Install the renamed migration-to-unofficial.zip
Reboot from TWRP to system
Downloads
Migration script: [migration-to-official.zip]
Unofficial LineageOS 16.0 2019-02-04: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Unofficial LineageOS 16.0 2019-01-27: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Unofficial LineageOS 16.0 2018-12-13: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Changelog
2019-02-04: fixed camera and sensors not working while data partition is encrypted and startup pin is required
2019-01-27: added built-in support for root, fixed Wi-Fi Display (WFD) video (but not audio yet), fixed USB MTP mode, updated GPS HAL and blobs from bq bardock, updated Netmgr QMI DPM (Data Port Mapper) blobs from xiaomi daisy, fixed SELinux labeling for userstore partition which should solve Wi-Fi MAC issues for all YTX703F users, restarting qmuxd when userdata is encrypted, which should fix LTE for YTX703L users with data encryption
2018-12-09: fixed alarms not firing, wifi tethering crashing, temporarily added back support for software dt2w
XDA:DevDB Information
LineageOS 16.0 for Lenovo Yoga Tab 3 Plus (YTX703F / YTX703L), ROM for the Lenovo Thinkpad Tablet
Contributors
vladimiroltean, Quallenauge, matshias
Source Code: https://github.com/Lenovo-YTX703-Devel/env/blob/master/scripts/picklist.sh
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: S000973_180524_ROW
Based On: LineageOS
Version Information
Status: Stable
Created 2018-10-03
Last Updated 2019-03-12
That is so quickly, and i also wondering did Google fired all the previous Android designer? bcz android 9.0 settings ui looks so badddddddddddd?? BTW thx you guys efforts still excited for 16 happened???
Dirty flash possible coming from last 15.1 build?
tombraga said:
Dirty flash possible coming from last 15.1 build?
Click to expand...
Click to collapse
No. If you don't want to get your hands dirty then best just wait for official 16 builds (probably at least 2 months from now).
cartman56 said:
That is so quickly, and i also wondering did Google fired all the previous Android designer? bcz android 9.0 settings ui looks so badddddddddddd?? BTW thx you guys efforts still excited for 16 happened
Click to expand...
Click to collapse
I know right? Maybe by the time the Lineage 16 bringup is over we can do something about it.
vladimiroltean said:
No. If you don't want to get your hands dirty then best just wait for official 16 builds (probably at least 2 months from now).
Click to expand...
Click to collapse
Too much time, i will try it....
so i do wipe of cache date and system, yes and then install the new unofficial 16.0, right?
tombraga said:
Too much time, i will try it....
so i do wipe of cache date and system, yes and then install the new unofficial 16.0, right?
Click to expand...
Click to collapse
Yup but first you have to backup, in case you want to roll back to 15.1
Can it be that the display is quite dark, even with 80% brightness, seems similar to the 15.1 update 2 weeks ago, where something with brigtness was no good.
I know, it´s a beta version now, but brightness should be a must to test the next 2 months....until official, thanks.
Is your issue that the display is dark despite being at max setting (a hardware issue), or rather that the automatic brightness control won't stay at max setting (a framework issue)?
vladimiroltean said:
Is your issue that the display is dark despite being at max setting (a hardware issue), or rather that the automatic brightness control won't stay at max setting (a framework issue)?
Click to expand...
Click to collapse
sorry, but i did not understand very well your comments.
i wanted only to say, that comparing with my last installation 15.1 with 45% brightness, now with LOS 16 seems to me, that 45% brightness is much more darker than before, so i put it on 80% now to have the same. But sure battery will spend more ....
In the meanwhile i could install opengapps 9 nano, magisk 17.1 all with not any problems, i like it very much the new build, thanks a lot... will use it and test it...
concerning dolby atmos: with 15.1 i had successfully installed the dolby-atmos-axon7-oreo installed---do you think i can flash ist also now with the new build?
tombraga said:
sorry, but i did not understand very well your comments.
Click to expand...
Click to collapse
I mean: if you disable automatic brightness control, is the screen any brighter?
vladimiroltean said:
I mean: if you disable automatic brightness control, is the screen any brighter?
Click to expand...
Click to collapse
no, it´s the same.
for me is a similar issue as we had short time ago with 15.1 official rom, when @Quallenauge wrote this:
Thanks, there were some changes in the background made which changes the way how the brightness is controlled to achieve the battery save mode. Maybe there is some tuning needed (if possible).
Other issue: i tried to flash dolby atmos, but got boot loop, so i had to wipe once more all and flash the new build once more.
but could reinstall all my apps with my google account, installing opengapps nano 9 - great thing.
thanks for all
After making a backup I just dirty flashed this release with open gapps nano for 9.0 (arm64) and until now evertything works like a charm! Did wipe cache and dalvik afterwards. Thanks for the update, great work!
vladimiroltean said:
It is my pleasure to announce, together with @Quallenauge, the availability of early access release LineageOS 16 builds for the Lenovo Yoga Tab 3 Plus devices (YTX703F and YTX703L).
To the best of our knowledge, the hardware works and SELinux is in enforcing mode. However, as Lineage 16 bringup is not complete yet, many operating system customizations are not yet available and there might be various minor glitches in the SystemUI.
These builds are of BETA quality and are not intended for stable, daily use yet. Installation is "as usual" - non-specific instructions given intentionally to deter people that are expecting stable software from installing and then complaining about things that are irrelevant at this point.
The purpose of these early builds is to speed up development by figuring out the next top priorities. Today also marks the movement of Lineage 15.1 into maintenance, no-new-features mode, as we are now investing our efforts so that most of you can hop on 16 in the near future.
Status
What works
Boots
Connectivity: WLAN, Bluetooth, LTE, GPS
Backlight control, sensors
Media playback
Camera
What doesn't work or wasn't tested
Encrypted data partition
OpenGapps SetupWizard may crash on first boot. You should be able to move along though.
Downloads
LineageOS 16.0 2018-10-02: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
XDA:DevDB Information
Unofficial LineageOS 16.0 for Lenovo Yoga Tab 3 Plus (YTX703F / YTX703L), ROM for the Lenovo Thinkpad Tablet
Contributors
vladimiroltean, Quallenauge
Source Code:
LineageOS Gerrit
Proprietary blobs
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: S000973_180524_ROW
Based On: LineageOS
Version Information
Status: Testing
Created 2018-10-03
Last Updated 2018-10-03
Click to expand...
Click to collapse
Can't wait for it to become stable enough for me to use this. Sadly I can no longer spend much time testing and trying things out.
But you guys are doing great work. It's hard to believe such a unknown device is getting so much development and such a great little community and devs.
Cheers
At this moment I have only 2 main issues:
Display missing brightness (too dark)
Sound could be louder, don't want to go to 100 % volume
tombraga said:
At this moment I have only 2 main issues:
Display missing brightness (too dark)
Sound could be louder, don't want to go to 100 % volume
Click to expand...
Click to collapse
I don't know what you're seeing/hearing, but I'm telling you for sure that the backlight brightness fix from 15.1 was integrated in these buils. Also we changed nothing about audio.
Look, what I reported is my impression, no critics and only comparation to 15.1 build, nothing more.
I only want to help, right.
to be sure about my display i restored my Oreo 15.1 backup and then restored again my Pie 16 backup and i confirm that with Pie 16 i have to configure about 80% display rate to have the same clear display as with 40% on Oreo 15.1
I don´t know why, i have automatic display disabled in the 2 builds, so we have the same conditions.
Concerning sound: ok, the comparation was not correct, because in Oreo 15.1 i could use the dolby atmos tool which i had installed.
I will continue with Pie 16 because it is the future and i like it, principally closing open apps works so fine swiping up...
And sure, i hope the display setttings will improve and one day i can get my dolby atmos also installed in pie...:good:
Is there any chance for DT2W in this new Pie build?
tombraga said:
Is there any chance for DT2W in this new Pie build?
Click to expand...
Click to collapse
These unofficial builds are only meant to exist until the Lineage 16 bringup is over and officials start shipping.
There is a 5% chance that my initial estimation is wrong and the touch panel really supports wake gestures at the firmware level. Now that I got a hold of a Synaptics datasheet, I can take some time and read the relevant registers to figure out whether that is the case or not. If it does, I'm glad to add it back. But if it doesn't, I hope it's understandable that I don't want to waste my time again by putting in and testing a temporary feature.
But by any means, do feel free to do that yourself if you want to, the community is not a single person or 2. Patches are here:
- https://github.com/LineageOS/androi...mmit/0ec6b8ceb0090a9a71679ee5521777252d754275
- https://github.com/LineageOS/androi...mmit/f42f856844049418beb322b5e5e6e606ebf4ba0a
- Revert https://github.com/LineageOS/androi...mmit/faaebc3041b4cbaf2f5c6add5dfd8935bb411a42
Build instructions:
- https://wiki.lineageos.org/devices/YTX703F/build
If you still want to run an SGSI (we have device specific roms now), I strongly recommend vanilla aosp. It is by far the smoothest and just simply works without issues. I will maintain AOSP for security patches until i'm using device specifics as a daily (still some bugs left). Go for my AEX or POSP now
What is this thread?
This thread is hosting my personal builds of sGSI's. As we don't have stable device specific Pie roms yet I believe this is still in high demand for you people that love AOSP roms and are patiently waiting for development. Until we have a stable device tree (which would translate into stable device specific roms) I will be mainting these builds. Aside from a few minor quirks these builds should work fine for daily usage.
What are the quirks?
For getting bluetooth to work you need a permissive kernel. You can use the magisk module provided in my mega library.
The statusbar padding is a bit off by default (fix is in my library as well)
AOSiP has longer boottime
What ROMS can I choose from?
For now my stable sGSI's are AOSiP, Pixel Experience and AOSP.
What vendor/firmware/kernel to use for what rom?
AOSiP:
S9/S9+ needs BRK3 vendor/firmware and endurance AOSP kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
Pixel Experience:
S9/S9+ needs BRK3 vendor/firmware and endurance AOSP kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
AOSP:
S9/S9+ needs BRK3 vendor/firmware and endurance GSI kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
Flashing instructions
1. Wipe everything
2. Flash firmware
3. Flash vendor
4. Flash gsi to system
5. Reboot recovery
6. Flash gapps
7. Flash kernel
8. Reboot
Note: skip step 5 and 6 for roms with gapps included
If you have an issue flashing gapps because of insufficient space, do the following in TWRP. Advanced wipe -> System Partition -> Repair or Change File System and Repair and Resize
Downloads:
This is my MEGA library where I host all the files you need for running your sGSI (and some extras): https://mega.nz/#F!wFFQUYbI!GZvNOBSn1wVn8U9mQDzBiw
Source code
https://github.com/TheCrazyBeaver/device_phh_treble
Credits:
Phhusson for his generic device tree
Codefox for being my main honi, the semi generic device tree and foxytreble
AzzyC for being my second honi
Eamo5 for his godlike endurance kernel
P.S. Note 9 plebs are welcome here but I won't make a thread in Note 9 forum as I don't own the device
XDA:DevDB Information
[sGSI 9.0] AOSiP / Pixel Experience / ViperOS //Personal Builds [S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CrazyBeaver2377, CrazyBeaver2377, CodeFox
Source Code: https://github.com/TheCrazyBeaver/device_phh_treble
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRK3 Vendor / Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2019-02-04
Last Updated 2019-02-11
XDA:DevDB Information
[sGSI 9.0] AOSiP / Pixel Experience / AOSP //Personal Builds [S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CrazyBeaver2377, CrazyBeaver2377, Codefox, Rainbow_Dash
Source Code: https://github.com/TheCrazyBeaver/device_phh_treble
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRK3 Vendor / Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2019-02-04
Last Updated 2019-02-13
reserved
Cheers, moving to your builds from now on mate
Thanks will try it tomorrow
arh6 vendor in Note9 does not install. In Download mode it gives the error : SystemDev Check Fail.Device:2 Binary 1....
Everything else works ok.
I just uploaded AOSiP, beware this is not tested yet by anyone so it might not boot!
Edit: AOSiP reported working!
Nice work I liked it
Please don't stop on this thread and tell us about any updates
"The Guy".
Thanks for all your releases man! PE is awesome along with Viper!
Since we are on the plate of AOSP roms, can we bring Euphoria back?
Or even Hazy / Discovery rom?
Thank you for all your work!
oreo firmware/vendor for a pie rom? didn't understand that though
carlesmc said:
I can`t flash on system ( twrp)
Click to expand...
Click to collapse
What do you mean exactly? You need to press the install image button and then install the system.img to the system partition.
here
edit
awesome job man
CrazyBeaver2377 said:
What do you mean exactly? You need to press the install image button and then install the system.img to the system partition.
Click to expand...
Click to collapse
I get the following error:
Cannot flash images to system
Thanks beaver! Awesome to see you publishing your work here too // macke @ teleg
Finally something new and fresh, good work ? don't give up !
What do you think about ResurrectionRemix v7.0 Pie?
Have you tried it?
Sent from my SM-G965F using Tapatalk
carlesmc said:
I get the following error:
Cannot flash images to system
Click to expand...
Click to collapse
You might need to upgrade to latest TWRP
a0007 said:
What do you think about ResurrectionRemix v7.0 Pie?
Have you tried it?
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
I build what I personally like, hence personal builds. And to be honest I don't like RR (overfeatured)
If there is high demand for one particular rom I might build it and drop one that is in low demand.
As I don't want to use up too much storage and time fixing build errors I want to stay with 3 ROMs maximum.
carlesmc said:
I get the following error:
Cannot flash images to system
Click to expand...
Click to collapse
Its weird and I've had it before, just don't erase system before trying to flash, just do a factory reset, then flash the image over system, I had that error but using this works every time
CrazyBeaver2377 said:
I build what I personally like, hence personal builds. And to be honest I don't like RR (overfeatured)
If there is high demand for one particular rom I might build it and drop one that is in low demand.
As I don't want to use up too much storage and time fixing build errors I want to stay with 3 ROMs maximum.
Click to expand...
Click to collapse
Aosip working nicely on S9 here mate:good::good:
Thanks for you work , I'll flash viperOS on my N9 later tonight, thanks again.