Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
try booting recovery from fastboot "fastboot boot *twrp image*.img"
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz​With miflash-20220218 in edl mode .
Good Morning! I'm having a boring problem with my Mi A2. I can not flash any ROM on my device. In the Fastboot screen does not appear Mi Bunny, although the PC recognizes. This happened after I had to put the phone in EDL mode to restore the stock kidney, in one in a failed attempt to install the miui 10 at the time the phone had got stuck on the screen initialization.
If anyone has a help I would be very grateful. It almost always gets stuck in error 1 or error 7 In twrp no custom ROM is recognized.. I don't remember the description but it is almost always an update error.
Hi everyone. I tried to install a global Rom and magisk to Xiaomi 6x twrp mode. After installing and pressing boot to system the phone won't boot. It stays black. Cant go to fastboot mode and recovery mode. When i plug in the cell to PC it makes a noise and to device manager shows the cell. But i see nothing on the screen. I think i have bricked my Xiaomi. What can i do please help. I tried to go in EDL mode but cant flash with Xiaomi tools. It comes: "Only nop and sig tag can be received before authentication."
Please guys help me i dont know what to do else.
Genti9000 said:
Hi everyone. I tried to install a global Rom and magisk to Xiaomi 6x twrp mode. After installing and pressing boot to system the phone won't boot. It stays black. Cant go to fastboot mode and recovery mode. When i plug in the cell to PC it makes a noise and to device manager shows the cell. But i see nothing on the screen. I think i have bricked my Xiaomi. What can i do please help. I tried to go in EDL mode but cant flash with Xiaomi tools. It comes: "Only nop and sig tag can be received before authentication."
Please guys help me i dont know what to do else.
Click to expand...
Click to collapse
you have ARB4 & converted wayne so bricked now with fastboot partially blocked
search for dummy.img
even if screen is black you can go to fastboot by using volume down and power button ..aftee you hear drivers install on pc open fastboot
then flash dummy.img ..
then flash twrp custom recovery ..
then flash custom rom from twrp ..
hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Any help?
I can help you bro
softmaster3 said:
hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Click to expand...
Click to collapse
What was your MIUI Version before installing twrp. You will lose your data for the fix. But its the matter of phone or no phone.
softmaster3 said:
Any help?
Click to expand...
Click to collapse
You device was global varient or chinese varient ?
You can checkout tutorials on using SP Flash tool to flash stock firmware, or I can explain when I get home. Also use spflash tool with MTK auth bypass or you won't be able to flash.
Had a pretty bad month as I completely killed my phones software. Heck I even deleted the preloader which is the core responsible thing for a mediatek chip based phone to boot. BUT SP flash tool saved the day.
You hard-bricked your phone, there's a guide I've made on how to recover it here.
[GUIDE][UNBRICK] How unbrick your bootloop in MERLIN after flashing TWRP (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
If you try to flash the file misc.bin your device can be in bootloop forever, please follow this guide to fix it. It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Method 1: Once your device is on the black screen, plug it on USB (try...
forum.xda-developers.com
I updated my phone and after that reboot option came then I clicked it then TWRP RECOVERY opened after that some process happened after that my phone turned off then MI LOGO started coming again and again and yes only FASTBOOT MODE is coming RECOVERY MODE IS NOT COMING. My phone had TWRP recovery installed and my phone was ROOTED the only problem is USB DEBUGGING is not enabled in my phone PLEASE HELP ME
reboot into fastboot and clean flash stock rom. thats what i had to do after getting stuck on the mi screen after flashing a magisk module, nothing else fixed it not even disabling the modules. to clarify you mean stuck on the mi logo with the 3 dots under it right?
I went into FASTBOOT MODE and then i flashed the STOCK ROM file and after that the problem was fixed. THANKS FOR REPLYING
SymtaxError said:
reboot into fastboot and clean flash stock rom. thats what i had to do after getting stuck on the mi screen after flashing a magisk module, nothing else fixed it not even disabling the modules. to clarify you mean stuck on the mi logo with the 3 dots under it right?
Click to expand...
Click to collapse
THANKS