Database Develop

XDA 2i cleaning kit???

I am looking to clean my xda 2i under the edges of the screen as this affects the tap accuracy.
Does anyone know of any kits, even ones involving funky screwdrivers so I can dismantle and clean (hopefully without pinging springs all over the place)
Rob

you dont need a kit just a bit of paper or thin card and run it around the edge of the screen under the facia, other than that just a standard small watch posi screw driver and a star screw driver driver, you can pick these up very cheaply, sry for got the size, if you buy a set of small ones you can strip it down in under 2 mins. there are no springs that will go ping btw

skeeve666 said:
you dont need a kit just a bit of paper or thin card and run it around the edge of the screen under the facia, other than that just a standard small watch posi screw driver and a star screw driver driver, you can pick these up very cheaply, sry for got the size, if you buy a set of small ones you can strip it down in under 2 mins. there are no springs that will go ping btw
Click to expand...
Click to collapse
I have been doing that but unfortunately it does something but not the trick though!!! small watch posi and star screwdriver eh? I'll need to look out for those!
ps glad about the springs, thx!

hmm
well managed to take it all apart and put it all back together again.
Still same issue though, the top part of the screen is not very sensitive
in fact it looks like there is a semi circle of inactivity there!! I may need a new screen or digitizer! Is the digitizer easy to remove from the lcd screen? anyone got any ideas? also do I need to solder on the new connections?

also I am sure I saw someone talking about a new lcd screen for 10 quid or something here somewhere, it was a link to an external website...

it was just for the digitizer (the touch panel not the full tft), i picked one up on ebay, its hard to fit ;[

Hi thanks for responding....
Theres one on ebay that comes with a soldering kit and instructions.... was that like the one you got...?
plus being hard to fit, did you managed to fit it in the end, and if so what did you find that helped...
alternatively where can you get it fitted by a professional?

not seen that one, mine was just the digitizer, and i am no stranger to the use of a soldering iron, you could get a local single trader shop, the sort that sell second hand mobiles and does mobile repairs, to do it for you, for a price

relbourn said:
Hi thanks for responding....
Theres one on ebay that comes with a soldering kit and instructions.... was that like the one you got...?
plus being hard to fit, did you managed to fit it in the end, and if so what did you find that helped...
alternatively where can you get it fitted by a professional?
Click to expand...
Click to collapse
Hi relbourn,
where can I find that all in one digitizer package from ebay ?
My O2 XDA IIi experienceing the same problem as you now :-(
I live in Australia, but still can't find any store which can do O2 digitiser repairs for me.
Cheers

I have had a look at it, and also took apart my xda 2i twice now for a check and decided that its a bit risky to do, re-soldering,
the kit model is here:
http://cgi.ebay.co.uk/ws/eBayISAPI....m=260199263230&ssPageName=STRK:MEWA:IT&ih=016
however I managed to find this screen (complete) from ebay too which includes the lcd screen, you may notice when you take yours apart it fits together with no soldering, kinda clips on, this looks far easier and for a slightly less than expected increment in price.....
http://cgi.ebay.co.uk/ws/eBayISAPI....m=250203637454&ssPageName=STRK:MEWN:IT&ih=015

relbourn said:
I have had a look at it, and also took apart my xda 2i twice now for a check and decided that its a bit risky to do, re-soldering,
the kit model is here:
http://cgi.ebay.co.uk/ws/eBayISAPI....m=260199263230&ssPageName=STRK:MEWA:IT&ih=016
however I managed to find this screen (complete) from ebay too which includes the lcd screen, you may notice when you take yours apart it fits together with no soldering, kinda clips on, this looks far easier and for a slightly less than expected increment in price.....
http://cgi.ebay.co.uk/ws/eBayISAPI....m=250203637454&ssPageName=STRK:MEWN:IT&ih=015
Click to expand...
Click to collapse
on the second link to the full lcd screen it says tha it is for O2 xda2 or Qtek 2020, not O2 xda2i or Qtek 2020i... i-ve found on these forums that the lcds from the two models are different and you cant use from one model on the other... it doesn't fit... so search for a lcd for QTEK 2020i or O2 XDA2i

Moving couch = Broken Tilt

I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks

well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.

brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya

pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?

This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.

I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.

Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.

brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !

pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$

brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help

Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.

congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"

brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it

I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.

When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...

DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.

I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together

kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????

Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF

here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot

Button clear covering peeling off....?

I noticed a problem with my Diamond today - the clear plastic covering the main button has started to peel at one edge (see pic). I've written to HTC to see if they'll repair it under warranty. Anyone else had this?

Crikey - fast reply from HTC:
"Good Afternoon, Essentially, we do cover your device under your warranty for paint peeling. If you call us on our technical support line, one of my collegues would be happy to book your device in for a repair and evaluation. Please can you call: 08458900079 Kind Regards, HTC Europe"
Full marks so far!
R

It was all going so well.... until...
I called the number and explained the issue to the lady on the phone. She told me categorically that this 'plastic refurbishment' is not covered under the warranty - I presume she knew what I was talking about although I could hardly understand a word she said. I explained that the email suggested it was covered. So, she asked me to go back to the email response and tell them what she said.
How annoying - firstly that you get two responses from one company and secondly that they reply on you to communicate between them. One is not impressed!
I have emailed HTC back with the news...
R

Hmm I have the exact same issue with my diamond. Almost 9 months old and I too have the problem off the plastiv letting go just above the home button. Well 1 month to go and I can get me a touch diamond 2 if it is released one month that is.

Now I get this:
Now essentially the HTC Touch Diamond has no known issues with paint peeling. As i did specify in my last e-mail, we can evaluate the device however if our repair center deem this to be caused by general wear and tear this would not be covered under your device warranty. I must also advise that if a quotation is raised due to an out of warranty repair there is a £20 charge to release the telephone back to you. With all that information in mind, would you still want to get this device evaluated?
So, I can pay £20 and be without my phone for 2 weeks in the hope that it *might* be covered. A bit annoyed at this - it is wear to the item but I count this wear to be within reasonable use and that the keys should be fit for purpose.....
R

My reply:
Hi, I think this is quite unfair. Essentially you are saying that I can send my phone in and hope you will see fit to cover it - but this is a risk, and if you presume it to be acceptable wear I will have to pay £20 have my phone released.
I know of others on internet forums who are also having this problem so I am not alone.
In my view, although this is 'wear' to the item it is within reasonable fair usage for the product. In other words the covering to the button is not fit for purpose in this case.
I am not prepared to risk £20 and be without my phone for 2 weeks whilst you decide if this is coverable or not - I have sent you a picture of the problem which clearly demonstrates the fault. The fault is obviously a lifting of the button covering that has occured during normal and acceptable use.
Please talk to your repair team and let me know if I will be covered or not.

Tell them that on other countries (in poland, im sure of) your issue is a 100% covered by warranty. As Poland HTC Support is in GB, and i assume its the same office they answer europe calls.
I know more than 5 people that had given their Diamonds for fix this issue without any cost.

I had the same problem.. I just peeled it off and ordered a screen protector+the bottom part for the keypad and just replaced it.. I didnt want to go through all the trouble. It worked out for me.

mmmhhh86 said:
I had the same problem.. I just peeled it off and ordered a screen protector+the bottom part for the keypad and just replaced it.. I didnt want to go through all the trouble. It worked out for me.
Click to expand...
Click to collapse
hey i remember you gave me the eBay sellers name, for the same one you purchased, but i couldnt find the item that has both screen protector, AND the button protector =/ you lucked out man!
I dont know if i wanna buy it from the seller located in Hong Kong! I just want the one that feels exactly the same as the one that comes with the Diamond

Had exactly the same problem back in January, I just peeled it off. Now the button area is getting quite scratched up and I'd love to get a replacement. I've not found anything on Expansys or elsewhere that's similar.
Cheers
Dave

OK - maybe I have the wrong idea about this. I thought the top layer was an intricate part of the button itself. The above posts seem to suggest it is merely a protective cover that can be easily removed and (if you can find the part) replaced? Is this correct?
R

Yes you can just peal it of, it does take some pealing so take care.

So, once you have peeled it off - what is underneath? Clear plastic? Sticky stuff? Can you rub the button decals off if you do not re-cover it?
R

Malik05 said:
hey i remember you gave me the eBay sellers name, for the same one you purchased, but i couldnt find the item that has both screen protector, AND the button protector =/ you lucked out man!
I dont know if i wanna buy it from the seller located in Hong Kong! I just want the one that feels exactly the same as the one that comes with the Diamond
Click to expand...
Click to collapse
Hey.. Yeah I remember giving you the link.. The seller had stock at the time you should have acted fast.. I cant find any seller who sells both pieces except in hong kong:S
Keep trying you might find something soon.
Answer to other questions: Yes you can peel it off. There will be some minor glue residues which you can take off and the decals will not be scratched off. I would replace it immediately though. Remember this is not the perfect solution but it is a fast and easier solution than dealing with HTC.. My opinion anyway. Good luck.

I have the same problem and in the same spot, im here in Australia and when i got fone only Telstra sold them.
I can not get it covered under warrenty.
it sucks.

Exact same problem here at the same corner too.
My initial solution has been to carefully slice off the lifted flap with a sharp knife to stop it ctaching my pocket and coming off further. Be careful of you do this though as you could damage other areas with the knife. I used a thin sharp blade held flat on the face of the phone and gently sliced through the flap from the outer edge.

Same problem here, left corner peeled off, so I peeled the whole cover off, and since I recognised that it gets scratches easily I covered it with a transparent sticker. But I already ordered new navi buttons, just don't know how to replace it...I'll see...

thanks for a useful thread. i had the same problem and just peeled it off. i'll start looking for new protection and post if i find anything

HTC HD2 (Leo) Screens...

Hi,
I've gone and stupidly sat on my phone and now the LCD screen has a dark patch in the middle of it..
I've tried gently rubbing which reduces the patch temporarily and also heating up with a hairdryer completely removes the patch, but also temporarily...
I think final solution is to tear down and replace the screen, does anyone have any suggestions on where I can purchase a replacement screen? Or where I can obtain one at all?
Thanks a lot

knightpants said:
Hi,
I've gone and stupidly sat on my phone and now the LCD screen has a dark patch in the middle of it..
I've tried gently rubbing which reduces the patch temporarily and also heating up with a hairdryer completely removes the patch, but also temporarily...
I think final solution is to tear down and replace the screen, does anyone have any suggestions on where I can purchase a replacement screen? Or where I can obtain one at all?
Thanks a lot
Click to expand...
Click to collapse
I think you should send it to HTC for repair... might cost more than trying to repair it yourself, but trying to repair it yourself could lead to disaster if you don't know what you're doing. Much better to have a professional repair it.

I have exactly the same problem :-O

Have been looking around here and i believe this is the same problem as we have, He fixed it with a sucktion cup so may as well try that
http://forum.xda-developers.com/showthread.php?t=462102&page=13&=#122

Thanks for the link mate. I will try the suction cup idea also and see if it works.
I have called HTC to find out about repair, they said (I'm in the UK), that they will send UPS to come collect and then they will give me a quote, it can take about 5 days to repair if I agree with the quote and £20 to send back to me... But they couldn't give me a better idea on price, although he said because the phone is new it would likely cost "a bit"...
I'll look for a couple more days for alternatives to fixing then it could be heading off to HTC

well the suction cup didn't work for me, tried to use a hoover as well .... all starting to sound rather kinky.
Will be sending off to HTC instead now. Thanks a lot anyway.

Get insurance and get a new one. Or get it fixed.

Same problem. Looks like nobody is selling replacemet parts for leo yet I've manage to find digitizer, but not complete with lcd screen. Is the phone too new maybe? Hopefully someone will start selling parts soon..

there are screens for sale , i think it's about 50 usd or thereabouts. You might want o search around i didn't save the link.

Today I found one by accident
http://4u-kidi.com/info.php?itno=5460

Nope, that's still only the digitizer/ touch screen not the actual LCD screen which displays the picture

i guess you mean the tft lcd screen.

knightpants said:
Hi,
I've gone and stupidly sat on my phone and now the LCD screen has a dark patch in the middle of it..
I've tried gently rubbing which reduces the patch temporarily and also heating up with a hairdryer completely removes the patch, but also temporarily...
I think final solution is to tear down and replace the screen, does anyone have any suggestions on where I can purchase a replacement screen? Or where I can obtain one at all?
Thanks a lot
Click to expand...
Click to collapse
I did the same thing Xmas day and I ended up with a patch in the middle just like the photo I've seen in the thread linked earlier in this thread
after the initial shock thinking I'd broke it already, on closer inspection it looked as if I'd squeezed the liquid out of it so I thought why not squeeze it back?
all I did was press from the outside of the screen using 2 fingers either side of the spot and then quite firmly squeeze towards the spot. I did this in a circular motion around the spot thus forcing the liquid back into the centre. Eventually it was OK after a few directed squeezes and it had completely vanished so imagine my relief
probably a bit late now, gently rubbing as the original poster didn't work for me as that's what I did initially. Eventually I was brave and used some force but not enough to create more spots, just enough to force the spots away again and fixed it completely

knightpants said:
Thanks for the link mate. I will try the suction cup idea also and see if it works.
I have called HTC to find out about repair, they said (I'm in the UK), that they will send UPS to come collect and then they will give me a quote, it can take about 5 days to repair if I agree with the quote and £20 to send back to me... But they couldn't give me a better idea on price, although he said because the phone is new it would likely cost "a bit"...
I'll look for a couple more days for alternatives to fixing then it could be heading off to HTC
Click to expand...
Click to collapse
Sounds like its going to be sent off to HTC Taiwan then... if the postage is £20

Raider digitizer glass shattered, anyone know the proper way to install a new one?

Yes, I already broke my phone. Go ahead, grin and chuckle..now that you've gotten it out of your system, anyone want to offer a little guidance? Never disassembled a newer cellphone before. New glass is ordered and has been shipped, just waiting for it to arrive. I'm hoping the process is fairly simple. I do have a specialized set of screwdrivers with all the hard-to-find bits, so that's not a problem ..it even has the tiny blackberry bit.. but from what I can see HTC uses standard micro Philips screws. Yay for standard formats!
Sent from my HTC PH39100 using xda premium

If this phone is anything like hd2 you're gunna want the flat pry tools they sell (search hd2 screen replacement tools). Their not needed but a nice handy thingy to have, other wise you might crack your LCD from flexing it too much.
Sent from my HTC PH39100 using XDA App

I wont grin and chuckle too much, I broke my Atrix after 4 days.

The Vivid screen seems very fragile. 2 of my coworkers have broken theirs within a few weeks of having them. Small drops from waist distance. Its too bad because I have seen the current Samsung models dropped from 6 feet face first and survive
Sent from my HTC PH39100 using xda premium

Yeah, I've cracked mine as well. If you google HTC raider teardown on YouTube.. There's a vid.... Butttt, it's not in English and it's a teardown not a screen replacement tutorial.
It seems as thought HTC has been using reeeeally thin glass in their devices.
Whered you get the glass? It'd be very thoughtful of you to do a tutorial as you do it. I really want to replacement mine but if you remove one on the screws by the battery it voids your warranty

Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.

travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
How much is it for them to fix it?

I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.

travisxcore said:
I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.
Click to expand...
Click to collapse
I'll do that right now. Thanks alot
(sorry to hijack the thread lol)

They use a double sided tape that hopefully comes with your replacement screen , I tried to replace a water damaged screen and it really wasn't a fun process
Sent from my HTC PH39100 using xda premium

It didn't fall very far..
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..

bproulx said:
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..
Click to expand...
Click to collapse
So, how was the installation process? And did it come with the adhesive? I'm going to buy it from that site as well

And then it was fixed..! FTW!
Ok sorry for the delay getting back to you guys.. been frantically waiting for the screen to clear US customs (ugh) and arrive, which it finally did today. I was able to get my hands on it at about 3 this afternoon, but I wasn't able to actually look at it until about an hour ago..
So.. I open the package, big grin on my face..and the first thing I notice is that the glass is AT&T branded. Funny, considering I'm in Canada and using Rogers..but hey a digitizer by any other name...and all that. So! I open the bag that my "tools" came in.. There are 2 blue plastic tools, one a prying tool and one looked a lot like a guitar pick. Cool. There are also 2 screwdrivers included, and I'm momentarily excited, until I realize they're just tiny torqx bits. The Raider uses TINY philips head screws, so those were useless. I put them into my tiny tool set..for later consideration.
Back to the screen. Looks like it the real deal, so I watch half of the teardown vid on youtube.. As mentioned in an earlier post it isn't an english-language vid so aside from seeing the locations of the screws and the methods of levering off the internal components, there's no exchange of information going on. I would like to mention however that the video kind of glazes over the locations and removal processes for some sensitive connections, so having only experienced laptop repairs personally.. I was in fairly uncomfortable and unfamiliar territory - but I was determined.
I tried several ways at getting the phone down to its base components, and finally succeeded in locating the panel's ribbon connector interface on one of the phone's circuit boards. I had to remove the back of the phone, pull the batt, sim and sd, and pull the 4 main screws that lock the housing down onto the phone.. From there its a matter of levering off the black plastic shell and whats underneath is a whole lot of tech in a very tight space. There were 3 or 4 wires I had to disconnect, about 15 tiny screws in 3 different lengths, and then when all was said and done I had to pry the busted panel off using the supplied blue lever tool (pretty handy, actually.) and then lift the lcd away from the metal housing enough to slide the old connector out and the new one through.. This was a very tricky process - I drink way too much coffee to hold completely steady for long..lol.. Finally got it all through, but by this time I had smudged the inside of both glass surfaces pretty badly and it took some serious mechanical dexterity to hold the surfaces and wipe them down without wrecking any of the flapping, loose circuit boards, screens, etc.. it was a frightening experience.. I won't lie.. I definitely feared the worst possible outcome given my limited experience.
So.. the panel's ribbon cable is inserted, the white clip back down securing it.. I manage after several attempts to remember how to put the puzzle all back together, and after about 45 minutes of messing with it I had a visually complete phone again. I hit power, and miracle of miracles the HTC logo flashes on the screen.. I'm hopeful..
The phone boots up, looks great (aside from a few smudges I missed on the inside..grr) so I start touching the screen and here's where we have the first problem..lol.. its recognizing that I'm touching the screen..but not really accurately.. it seems to be that there are dead areas.. So now I'm thinking I broke something..lol..
Smoke break.
Took it all apart again, forgot to clean the smudges, removed and re-seated all the connections, and about 15 minutes later I had it back together again. I booted it up and waited.
Success!! It sees where I'm touching accurately now - I think the ribbon must have moved while I was putting it back together, I was shifting things a lot as I was trying to figure it all out, so I must have stressed the cable enough to move it slightly in the slot.. that, or I didn't have it all the way in / straight the first time I did it. Either way, it works fine now. I was successful on the 2nd attempt, and now the only difference is that this glass feels..rougher? less smooth? not sure how to describe it.. it feels different, anyway.. and the at&t logo of course. Aside from that, you'd never know it was in pieces an hour ago..lol.
Would I do this again? ..I hope I don't have to. Its not impossible, but man, if you're going to try this BE SUPER CAREFUL!! lol..
edit: and no - it didn't come with the double sided tape, but it seems to be staying without having to replace it.. it wasn't too hard to remove it from the panel, but getting it back on straight took some finesse.. lol.. it comes apart easier now when you're tryingn to disassemble it..but seems to be holding together fine on its own.

travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
Corning makes the glass on the Raider/Vivid?
I would suspect it to be more sturdy if its corning, my SGS has been without a screen protector and still does not have any scratches. Yes i know SGS is Gorilla Glass and this is not but i would think it would be stronger.
@ bproulx
You should take it apart again and make a tutorial . I hope i never have to go though what you did. Knock on wood.

lol..might take it apart again..
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.

bproulx said:
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.
Click to expand...
Click to collapse
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible

Getting better at taking it apart..lol..
Chism87 said:
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible
Click to expand...
Click to collapse
No, the little void sticker on mine was less like a sticker and more like... glue, with paint on it.. lol.. it just flaked apart when I tried to lift it.. but I wasn't concerned with preserving it. Maybe if u use an x-acto or something like that you can lift it intact..? Let me know how you do.
I started getting some random touch input glitches yesterday, and today they got worse.. then my son spilled hot coffee on me and I dropped my phone on the carpet where it of course popped apart..lol..and then when I booted it back up I had some *major* touch glitches.. it was seeing input higher up than the actual contact point, and just acting real buggy..the phone was lagging.. so I took it apart again, completely.. took my sweet time reassembling it this time - I even got out the micro-fibre cloth and cleaned all the glass, and voila.. this time - its like new. I can already tell its put together right this time, which tells me something wasn't quite right before - I'm guessing I didn't get the ribbon cable seated properly before.. there are a lot of tiny, offset contacts on the end of that little cable. Anyway, I guess the moral of the story is screw warranties, and the more times you disassemble your phone the better you get at it.. lol.. it wasn't anywhere near as intimidating this time around. Felt kinda easy, actually. I think I just psyched myself into thinking it would be hard to do the first time around.
I do miss my original glass tho.. I'm thinking about contacting HTC and ordering an oem panel lol.. this one feels.. grippy. The HTC one felt smooth as silk.. I dunno this one kinda feels more like window glass. Meh.. better than a broken ghetto phone. At least now I can whip it out in public without hanging my head in shame and peeking around to see who's looking at my ugly screen. I never even tried HTC directly..I just googled the part and went with the one with good reviews..

OMFG...FML..
Sooo.. I got angry at my Raider today.. started doing the weird touch input glitches again after a battery pull, got frustrated and slammed my phone down on the table in anger...and.... smash. Brand new panel is now ten times as shattered as the old one was. AND...now the phone won't even light up. AND..it looks like I may have cracked the actual LCD this time.. just a small crack at the very bottom - wouldn't even be visible with the shell on the phone.. but.. I'm not very optimistic. I get absolutely nothing on my screen when I boot the phone, all I get is one haptic "bump" and thats it. Nada.
Sooo... looks like I need a new phone. Again.
Lame.
There goes $600.00
....sigh.
Anyone wanna donate an old android device to a guy who's now really really sad and has no phone? LOL.. why did I give away my legend????

Not giving up my phone!! LOL!
Ok so I decided to try my luck at replacing the LCD as well as the busted digitizer that I just re-broke..lol.. back to tmart, and ordered both. I really wish I could have found the whole assembly pre-built, but the only company I found selling both as a single unit had a minimum order of 5 pcs. Out of my price range for repairs, although with my track record maybe it wouldn't have been a bad idea? lol.. anyway, I just bought both parts from tmart and am still waiting for one of them to show up. The good news is I was able to replace the LCD already. It really is just held in there with tape. Like.. there's nothing really holding it all together..you'd think with all those screws and tabs they could have come up with a better way?? Ah well. I have a display again, but until I can get the digitizer and install it I'm without input.. so I can just watch the phone boot and then sit on my lock screen. Or boot into recovery mode and use the vol and power buttons to mess about.. But why..lol. I'll just wait.
I'm just happy that nothing else seems to be affected. I had my alarm going off still with no screen, so that tipped me off that everything else should still be ok. I won't know for 100% certain til I complete the repair, but it looks promising. I picked up a used HTC Magic (ugh) from kijiji for $80 and it came with 3 batteries, 3 chargers, 3 usb cables, 3 leather cases, and a bunch of other crap in threes. Just so I'm not completely without a phone in the meantime. Overall not bad for $80 but man is this phone slow. I installed a custom rom **THANKS XDA!!** on it and it improved the performance and look of the OS a little, but it lags a lot even overclocked when just typing a text.. I can't wait to get my phone back!!
Aside from the screens, this phone is pretty tough. I slammed that sucker down pretty hard that day.. Cmon HTC - why didn't you give us gorilla glass on a $600 LTE phone!?!?!?!? I wish I could find an aftermarket panel that was made from gorilla glass. That would totally rock!

Yeah, i really wish they would've put gorilla glass on it. I used to have the atrix and ive dropped it on tile floor at least 3 times... Nothing. Keys in the same pocket as phone.. No scratches at all.
I didn't want to try my luck, so I just got a replacement vivid