Database Develop

MDA III German to English repost

Gone but not forgotten, thanks to Google Desktop. Here's the gist of the hard work everyone did to enable flashing the MDAIII german to english, as summarized by pablo in his now-gone post:
ok, let's go
download the zip of the post i wrote:
ftp://ftp.clubimate.com/support/PDA2K_CDL_11200_134_10200_SHIP.zip
unzip 2 times in a new folder
then download the latest xda3nbftool of this thread, and copy it in the same folder where unzipped before:
[see next post]
then create the following bat file with wordpad (remember the .bat extension, NOT .txt)
copy EXACTLY the rows that follows:
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -so T-MOB101 -sl GER ms_.nba
xda3nbftool -so T-MOB101 -sl GER nk.nba
xda3nbftool -so T-MOB101 -sl GER radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
then, with your pda connected with ActiveSync, run BaUpgradeUt.exe file in the folder
HAPPY DAYS WITH YOUR NEW MDAIII ENGLISH!!!
fully working, i've tested bluetooth and wlan: they works great!
thanks to ALL people of this fantastic thread/forum

Here is the xda3nbftool that went missing.

I would like to flash a german language T-mobile MDA III to english,
but I can't seem to access either of the links above.
download the zip of the post i wrote:
ftp://ftp.clubimate.com/support/PDA2K_CDL_11200_134_10200_SHIP.zip
Click to expand...
Click to collapse
or
Here is the xda3nbftool that went missing.
Click to expand...
Click to collapse
Thanks in advance (not to far in advance , I hope ;-) )
DJW

I also could not reach the links above. Does anyone else have the files needed for this German to English upgrade?
I just got my MDA III and though I can get by in German, English is much more preferable.
Thanks in advance!

You need to be a member to download a file from this site.
For the imate rom, the latest version is linked somewhere around here. I think it's in the FTP section.
Wn

Thanks Public.
I registered, downloaded and found the imate ROM in the FTP section.
After a back-up, I'm going for it.

ok i'm ignorant, where or what is the "FTP" section please?
dw

Register yourself
DJW said:
ok i'm ignorant, where or what is the "FTP" section please?
dw
Click to expand...
Click to collapse
Be a part of the community. Assimilation is inevitable. :twisted: Then, click on the posted FTP link stated in the first few posts here, and you should get what you want.

Missing file?
There is no file
PDA2K_CDL_11200_134_10200_SHIP.zip
on ftp server, file name
PDA2k_CDLWWE_11222_169_10200_SHIP.zip
is this a new version of the same file, or what?
Sorry for my english, and thx

about .bat file?
What is the name of .bat file?
Did I need run this .bat file before I connect my pda?
How risk is this procedure?
Thx again

MANY THANKS!!
worked as described.
Is there a method for returning to german, for warranty coverage down the road?
thanks again, this is the greatest forum for learning how to get the most out of the devices'
dw

DJW said:
MANY THANKS!!
worked as described.
Is there a method for returning to german, for warranty coverage down the road?
thanks again, this is the greatest forum for learning how to get the most out of the devices'
dw
Click to expand...
Click to collapse
glad to see that u hv sort yourself out. great dude, c u around.

DJW said:
MANY THANKS!!
worked as described.
Is there a method for returning to german, for warranty coverage down the road?
thanks again, this is the greatest forum for learning how to get the most out of the devices'
dw
Click to expand...
Click to collapse
as to your question, if it is the same version of the ROM, it may be that you just need to reverse the installation process and re-install the GER version prior to sending your device in for repairs.
They will check the device information, so be sure u hv the ROM and Radio Stack back in original version.
Cheers.

Hi all ,
Congrats to wnpublic for this great help!
Can anyone tell me how to access the extended ROM, or create a new one to get into my pda2k?
I´ve tried accessing the .nbf file but it asks me for a password.
Wich is easier? Create a new Extended ROM or getting the password for this one??
Thanks guys!!!
Nuno
PT

Error
Hi all!
plz help!
What I do not so?:
1. files in my folder:
Files in folder:
BaUpgradeUt.exe
DisconnectActiveSync.exe
EnterBL.exe
GetDeviceData.exe
HTCRUU.conf
HTCRUU.dll
ms_.nbf
nk.nbf
nk.nbf
PDA2K_CDL_11200_134_10200_SHIP
radio_.nbf
xda3nbftool.exe
install.bat - this my file :
xda3nbftool-x ms_.nbf ms_.nba 0x20040522
xda3nbftool-x nk.nbf nk.nba 0x20040521
xda3nbftool-x radio_.nbf radio_.nba 0x20040523
xda3nbftool-so T-MOB101-sl GER ms_.nba
xda3nbftool-so T-MOB101-sl GER nk.nba
xda3nbftool-so T-MOB101-sl GER radio_.nba
xda3nbftool-c-u NK.nba
xda3nbftool-c-u ms_.nba
xda3nbftool-c-u Radio_.nba
xda3nbftool-x ms_.nba ms_.nbf 0x20040522
xda3nbftool-x nk.nba nk.nbf 0x20040521
xda3nbftool-x radio_.nba radio_.nbf 0x20040523
del *.nba
((all files from ftp://forum.xda-developers.com/BlueAngel/PDA2K_CDL_11200_134_10200_SHIP/))
after run BaUpgradeUt.exe (Stage 3:Updating CE ROM image, 74%)
write error:
message:
ERROR 112: COUNTRY ID ERROR 34-34-12-12-12
There can be files bad? Where to take good?
plz help!
thank
:?

I don't think you changed anything. I don't see any space between xda3nbftool and the -x option and the other option. Add Spaces and try again.

Yes, all ok!
All thank

Please HElp !!!!!
If somebody has this file PDA2K_CDL_11200_134_10200_SHIP.zip please repost again ..... I need it badly
Thanks alot

Here ya go.
http://www.clubimate.com/Support/PDA2k_CDLWWE_11222_169_10200_SHIP.zip

Thanks alot
I hope it will work withmy new MDA IIs

QTEK9090 French to English conversion

:?:
Hi,
I have ordered a new QTEK9090, which the provider here will only supply me in French. I see conversions on this forum for German to English. However, is there one for Frnech to English?
Thanks

Not that i'm aware of, but the process is similar. You will just have to do a few extra steps, like putting Devicedata.exe on your device and retrieving the devicedata.txt file so you know the operator and "country" ID to use with xda3nbftool.exe.
No reason why it shouldn't work.

It should be the same conversion process. You'll need to dump the french ROM from your phone unlock it using the exact same commands, use a hex editor to see what the french ROM has for a carrier code (T-Mobile) and the designation to say that it is in French (i.e. WWE for english).
You will then modify the .bat file in the other posts that were listed for the German update.
********************8
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -so T-MOB101 -sl GER ms_.nba
xda3nbftool -so T-MOB101 -sl GER nk.nba
xda3nbftool -so T-MOB101 -sl GER radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
*****************
You'll want to modify the "T-MOB101" and "GER" settings to what you find in the first 128 bytes of the French ROM that you pull off the device to your SD card or PC. I have never dumped a ROM off of a device so you have to search this site for instructions, I know they have been posted multiple times. So to sum it up:
1. Dump the ROM from your French phone to your desktop
2. Use the command xda3nbftool -x nk.nbf nk.nba 0x20040521 to unlock the nk ROM
3. Use a hex editor to read the nk.nba file (XVI32.exe, search web)
4. Once you see what they have for the operator code and how they specify French (FRE???) you will then modify the above commands and save in a .bat
5. Run the .bat file you just saved
6. Run BaUpgradeUt.exe in you unzipped ROM directory.
Hope this helps.

I Just noticed that you’re a newbie. If you search the forum for "dumping ROMs to the SD card", "How do I get the ROM off my XDA/XDAII/MDAIII" , etc and forward me the links, I'll then do the processes on my end first so I know what I'm doing before I hold your hand. I can then walk you through the process to get the two unknown pieces of data, provider and the French 3 letter abbreviation. I'll do all the changes and upload a completed set of files for you to use to make it easy.
Deal? If so, start searching and PM with your results.
later,
Wnpublic,
Do you know how to dump from the device to the SD or desktop machine?

I don't know how to dump the "original" ROM. It appears to be possible, I just haven't explored.
BUT
dumping that rom to get country code and operator ID is unnecessary. All you need to do is put Devicedata.exe on your device and run it. That will create a small text file called Devicedata.txt. Open it and it shows the whole header - or at least enough of it to do the upgrade.
Devicedata.exe is part of the standard upgrade package. simply get the imate one, for instance, unzip it twice, and devicedata.exe will be there.

Thanks,
I had just realized this last night as I reading up on dumping the ROM. I had totally forgot about it, thanks for the reminder and making the complex simple!

New ROM 1.22.169WWE

On www.qtek.nu, there is a new ROM (1.22.169WWE) available, with Radio, WLAN and Bluetooth updated.
Has anyone the correct link to the file? Has anyone found out what exactly was updated??
A

http://www.qtek.nu/files/BA_WWE_BP_12200_169_10602_SHIP.zip

Qtek9090 said:
On www.qtek.nu, there is a new ROM (1.22.169WWE) available, with Radio, WLAN and Bluetooth updated.
Has anyone the correct link to the file? Has anyone found out what exactly was updated??
A
Click to expand...
Click to collapse
I have tried the Dangaard Norwegian Rom, has 1.22.167 Extended and the 106.02 Radio Rom. Nearly the same as the Rom Qtek.nu has released. I was having problem with the radio (GSM) and have decided to put back the old Qtek Rom version 122.126.
I think I will wait this 122.169 Qtek rom.

will it be good this rom for the pda2k??
thank you

to see when the sack imate....

Do not seem to work
Tried this, said wrong password ???
when i run the xda3nbftool
Any ide´s

Re: Do not seem to work
backspace said:
Tried this, said wrong password ???
when i run the xda3nbftool
Any ide´s
Click to expand...
Click to collapse
Hi,
Also wrong password. My fix.bat (with German MDAIII with English ROM) works fine with BA_WWE_BP_12200_126_10600_SHIP.exe but not with this version. Please see log if it can help to solve problem.
Regards
Log:
D:\Test>fix
D:\Test>xda3nbftool -x ms_.nbf ms_.nba 0x20040522
WARNING: this does not look like a nbf header, possible you provided the wrong password
D:\Test>xda3nbftool -x nk.nbf nk.nba 0x20040521
WARNING: this does not look like a nbf header, possible you provided the wrong password
D:\Test>xda3nbftool -x radio_.nbf radio_.nba 0x20040523
WARNING: this does not look like a nbf header, possible you provided the wrong password
D:\Test>xda3nbftool -sd PH20B -so T-MOB101 -sl GER ms_.nba
D:\Test>xda3nbftool -sd PH20B -so T-MOB101 -sl GER nk.nba
D:\Test>xda3nbftool -sd PH20B -so T-MOB101 -sl GER radio_.nba
D:\Test>xda3nbftool -c -u NK.nba
updated checksum to 9f20466f
D:\Test>xda3nbftool -c -u ms_.nba
updated checksum to a895061e
D:\Test>xda3nbftool -c -u Radio_.nba
updated checksum to 472abd49
D:\Test>xda3nbftool -x ms_.nba ms_.nbf 0x20040522
D:\Test>xda3nbftool -x nk.nba nk.nbf 0x20040521
D:\Test>xda3nbftool -x radio_.nba radio_.nbf 0x20040523
D:\Test>del *.nba
D:\Test>

Does somebody has the correct checksum to make the tool work ?

maybe this has something to do with the incorrect password/checksum
http://forum.xda-developers.com/viewtopic.php?t=14877

Why I made my own ROM
Hi there,
I have a SVP M2000 from Orange France. I hate french OS, so the first thing I have done was to upgrade it to English (it's a stupid I cannot configure the French buit-in keyboard in French when I use an English ROM... but I wait for the project here to reconfigure the keyboard! :lol: )
I have tried all roms here for the Blue Angel and I wasn't really satisfied with any of them, so I have taken the best of all to make my own and my SPV M2000 works great.
My little story:
My first upgrade was the english version from Qtek BA_WWE_BP_12200_126_10600_SHIP.exe but I had some small problems. My SPV M2000 sometimes had a strange behaviour and I had to do a soft reset.
Then I tried the PDA2k_WWE_12200_162_10600_SHIP.exe and those problems disappeared. As the Radio and the Windows ROMs are identical, I thought the problems with the Qtek version were in the extended ROM.
When I heard that the french version for Qtek BA_FRE_BP_12202_558_10602_SHIP.exe had radio ROM version 10602 (and as there's not localization for the radio stack) I decided to use it.
I tried then both english versions (Qtek BA_WWE_BP_12200_126_10600_SHIP.exe and i-mate PDA2k_WWE_12200_162_10600_SHIP.exe) with the file radio_.nbf from BA_FRE_BP_12202_558_10602_SHIP.exe but with the Qtek version I had now some problems with the radio and bluetooth.
I got very excited when I heard about the norwegian version BA_WWE_BP_12200_169_10602_SHIP.exe but I had the same checksum problems described here using the xda3nbftool.
Finally, I decided to use PDA2k_WWE_12200_162_10600_SHIP.exe and replace the original radio_nbf file (10600) with the radio _.nbf file from BA_FRE_BP_12202_558_10602_SHIP.exe
Now, I don't have any problems with the radio nor with the Extended ROM from Qtek BA_WWE_BP_12200_126_10600_SHIP.exe!!!
Hope this helps

anyone figured out the password yet???

Re: Why I made my own ROM
You got this file to share
ArtZ said:
Hi there,
I have a SVP M2000 from Orange France. I hate french OS, so the first thing I have done was to upgrade it to English (it's a stupid I cannot configure the French buit-in keyboard in French when I use an English ROM... but I wait for the project here to reconfigure the keyboard! :lol: )
I have tried all roms here for the Blue Angel and I wasn't really satisfied with any of them, so I have taken the best of all to make my own and my SPV M2000 works great.
My little story:
My first upgrade was the english version from Qtek BA_WWE_BP_12200_126_10600_SHIP.exe but I had some small problems. My SPV M2000 sometimes had a strange behaviour and I had to do a soft reset.
Then I tried the PDA2k_WWE_12200_162_10600_SHIP.exe and those problems disappeared. As the Radio and the Windows ROMs are identical, I thought the problems with the Qtek version were in the extended ROM.
When I heard that the french version for Qtek BA_FRE_BP_12202_558_10602_SHIP.exe had radio ROM version 10602 (and as there's not localization for the radio stack) I decided to use it.
I tried then both english versions (Qtek BA_WWE_BP_12200_126_10600_SHIP.exe and i-mate PDA2k_WWE_12200_162_10600_SHIP.exe) with the file radio_.nbf from BA_FRE_BP_12202_558_10602_SHIP.exe but with the Qtek version I had now some problems with the radio and bluetooth.
I got very excited when I heard about the norwegian version BA_WWE_BP_12200_169_10602_SHIP.exe but I had the same checksum problems described here using the xda3nbftool.
Finally, I decided to use PDA2k_WWE_12200_162_10600_SHIP.exe and replace the original radio_nbf file (10600) with the radio _.nbf file from BA_FRE_BP_12202_558_10602_SHIP.exe
Now, I don't have any problems with the radio nor with the Extended ROM from Qtek BA_WWE_BP_12200_126_10600_SHIP.exe!!!
Hope this helps
Click to expand...
Click to collapse

ROM Files
backspace,
Unfortunately I don't have an ftp server, but the links to download the three ROM files I talked about are all in xda-developers
You can download the Qtek BA_FRE_BP_12202_558_10602_SHIP.exe (which is also called BA_FRA_BelDT_12202_558_10602_Ship.exe) at http://cyberb0b.ggu-squad.org/share/BA_FRA_BelDT_12202_558_10602_Ship.exe
This update has been released on December 17, 2004
For the i-mate file PDA2k_WWE_12200_162_10600_SHIP.exe you will find it at http://www.clubimate.com/Support/PDA2k_WWE_12200_162_10600_SHIP.exe
This upgrade has been released on December 20, 2004
For the Qtek file BA_WWE_BP_12200_126_10600.exe you will find it at http://www.qtek.nu/files/BA_WWE_BP_12200_126_10600.zip
This upgrade has been released on November 22, 2004
To extract the files inside each exe file, you can open them with WinRAR and take only the files that interest you in each package

Hello guys!
So anyone figured out how to solv this problem This xda3nfbtool needs a litlle update. For sure the next roms will have diferent encryption like this one.
Hope somone smarter than me in this matter solve this
Cheers

@ Cane
I have T-Mobile German MDAIII (PH20B) now English,
SIM is swiss on sunrise.
CE image 1.22.0
EXTRom 1.12.169
Radio 1.02.00
From :
PDA2k_CDLWWE_11222_169_10200_SHIP.exe
I Downloaded PDA2k_WWE_12200_162_10600_SHIP from above
Extracted it
Added the xda3nbftool file in same DIR
Ran the FIX.BAT that I used before:
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -sd PH20B -so T-MOB101 -sl GER ms_.nba
xda3nbftool -sd PH20B -so T-MOB101 -sl GER nk.nba
xda3nbftool -sd PH20B -so T-MOB101 -sl GER radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
Then ran the BaUpgradeUt.exe (whis is Now Version 2.3.0.0)
The screen comes up with update old to:
CE image 1.22.0
EXTRom 1.22.162
Radio 1.06.00
What I have not yet done to extract the Radio from
BA_FRE_BP_12202_558_10602_SHIP.exe

Hi every body!
I have a Qtek 9090
I upgraded my ROM from 1.12.00 to 1.22.126, I had problems but I solved it with "Country_error_fix.rar"
Now I`d like to upgrade my ROM to 1.22.169 and i heve the same country error.
The questionis could i use the same "Country fix error.bat" to solve the problem or i need another one?
thank you very much
Text of "Country fix error.bat" is:
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -so DANGA001 -sl WWE ms_.nba
xda3nbftool -so DANGA001 -sl WWE nk.nba
xda3nbftool -so DANGA001 -sl WWE radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba

I have found that to make it work,you have to copy the country error fix file to a new folder where you download the update to.Then unzip/unrar it , right click and edit to open, then I had to use edit>select all>file>save>exit. Then do the same procedure to update as before. I dont know why you have to open and unzip it into a new folder with the rom and all, but it has worked 2 of the 3 times I tried it. The other time I screwed up!!! LOL
Hope this helps.............. 8)

I get an error as well fixing the country code with the xda3nbftool.
Did anyone figure out the new password or change the xda3nbftool?
>WARNING: this does not look like a nbf header, possible you provided the wrong password
What exactly is improved in ROM 169?
A

Proper procedure
As far I as know this is the upgrade hack procedure:
1. Download de xda3nbftool from http://www.xda-developers.com. This program modifies the ROM upgrade files.
2. Extract the ROM upgrade executable to a folder of choice.
3. Copy the exec GetDeviceData.exe from this extract folder to the TEMP directory on the Qtek 9090.
4. Run the GetDeviceData.exe on the QTEK 9090. This exec creates a file called \Windows\DeviceData.txt.
5. Copy this file \Windows\DeviceData.txt to the desktop computer en open it. The DeviceData.txt file contains the data for the -sd, -sl en -so switches. Use this data from your own QTEK 9090, NOT the standard DANGA001 or WWE.
6. Create a CHANGE.BAT batch file :
CHANGE.BAT:
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -sd ????? -sl ???? -so ???? ms_.nba
xda3nbftool -sd ????? -sl ???? -so ???? nk.nba
xda3nbftool -sd ????? -sl ???? -so ???? radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
Replace the question marks with the data from DeviceData.txt
'sl' stands for language, e.g. WWE.
'so' stands for operator (Country ID), e.g. BRIGH001.
'sd' stands for device, e.g. PH20B.
7. Put CHANGE.BAT, the xda3nbftool and all extracted files (ms..nbf, nk..nbf en radio..nbf...) in one folder.
8. Run CHANGE.BAT first.
9. Upgrade the QTEK 9090's ROM by running the BaUpgradeUt.exe.
This should do the trick.

Ran the GetDeviceData.exe on my Dutch QTEK 9090.
The results:
'sl' (language): WWE
'so' (Country ID): DANGA001
'sd' (device): PH20B.
So my CHANGE.BAT file would look like this:
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -sd PH20B -sl WWE -so DANGA001 ms_.nba
xda3nbftool -sd PH20B -sl WWE -so DANGA001 nk.nba
xda3nbftool -sd PH20B -sl WWE -so DANGA001 radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba

help with upgrading Siemens SX66

i have been following instructions on multiple thread and wiki's page but i still can't upgrade both full ROM or even radio only.
running EditFix.bat gave me "header info error and possible wrong password".
added [CHECKCEID_TYPE]=1 but still no help.
unable to open any of the roms using er2003edit as i do not have the password.
i have a xda2 and i was able to perform upgrades by tweaking the rom files but BlueAngel seems a lot harder.
can someone help me out?
thanks in advance.

finally!
finally upgraded my Siemens SX66 to
CE ROM: v1.40
Radio : v1.12
(did not change my ExtROM; didnt see a need for it)
from original
CE ROM: 1.33.10
Ext ROM: 1.33.110
Radio : 1.02.10
my steps:
1) download and extract ftp://xda:[email protected]/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom.rar
2) open HTCRUU.conf in notepad and add-in [CHECKCEID_TYPE]=1
3) search the forum for xda3nbftool.exe and download into the same folder
4) open command prompt and go to working folder; run the following commands:
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -sd PH20B1 -sl WWE -so XGULA001 nk.nba
xda3nbftool -c -u NK.nba
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -sd PH20B1 -sl WWE -so XGULA001 radio_.nba
xda3nbftool -c -u radio_.nba
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
5) finally, run BaUpgradeUt.exe
Last note! Upgrade at your own risk!

issue(s) encountered so far:
1) scroll button (up & down) does not work at all. Can someone help?

Hey you guy, pretty nice procedure! finally it works on my XDAIII
Thank ya

SX66 Upgrade Issues?
Hey Lazzy,
Did you work out the last bugs after your upgrade?
I have an SX66 and want to fix the horrible BT issues.
Sounds like you are very close to a solid upgrade.
Let me know if you think this is doable for me.
I'm not a programmer but am capable of following your instructions.

sorry cozy but i haven't had time to poke around. and currently my version has the DAMN camera software installed as well and my bluetooth headset doesn't work very well.
will keep you guys posted once i have time to research.

i also have the camera app, but i hide the app shortcut

WM5 for Vodafone v1620 (Blue Angel)

Hi all
I have been attempting to update a Vodafone branded Blue Angel (v1620) without success, the ROM images I have tried all state the oncorrect Model ID. I have searched the forums for Vodafone, v1620 etc to no avail.
I have also tried using the QTek 9090 Rom but also doesnt work
Any ideas would be most appreciated,.
Many thanks
DB

Hi there,
I've done the update procedure without any problems. I've used most of the WM5 Roms out here.
I'll post my xda3nbftool batch file, which makes all WM5 roms compatible with PH20B2. (can't do it cos i'm writing from ba)

Xan
Thanks for that, Ill look forward to it.
DB

Ok, here is the batch:
Code:
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -sd PH20B2 -sl WWE -so VODAP001 ms_.nba
xda3nbftool -sd PH20B2 -sl WWE -so VODAP001 nk.nba
xda3nbftool -sd PH20B2 -sl WWE -so VODAP001 radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba

Hi, im also trying to upgrade my PH20B2 to wm5.
where do i put your batch file, cos all im getting is file not found!!
thanks
A newbie.........

Have U tried using MaUpgradeUt_noID.exe (copy all files from PH20B1 folder to directory where nk.nbf file is - Helmi's)?
Cos this works for me, without any editing of rom image.

Ill try this tomorrow and report back
Thanks

thats nic but i need

Thanks for the info. My VPx works with the MaUgrade and this time I did not lose my camera function.
So far, it looks really good.