Ok, I am going to ask a dumb question here. Please don't make fun of me.
I am trying to get through this country code problem so I can upgrade my PDA2K. I have copied GetDeviceData.exe to my device (drag-and-dropped it there from my PC). Now - how the heck to I run the thing?
See, I told you it was a stupid question!
Re
Dear,
You have to use File Explorer to locate the folder in which you dropped the program and then double click it. If you wanna make shortcut to that, do the following
- Copy the file
- go to windows directory in your ppc and spot for start menu and then double click for program folder, then paste (paste as shortcut) the program in that folder
now you should be able to execute the program directly from your program screen
hth
Related
Can someone please answer the most basic of N00B questions ...
1) How do I install .EXE files onto the Tilt
2) How do I install .CAB files onto the Tilt
Specifically, with # 1, I am trying to install KaiserTweak, but it does not run under Windows XP and there is no info on how to get it onto the phone and how to install it (it has an XML too).
Thanks!
copy them over to your kaiser. run them by clicking on them using file explorer
Ummm ... N00bier
Thanks, but HOW?
I have activesync running, and it is doing a bang up job. I cannot figure out how to get the EXE and XML over onto the phone.
Also, how would a CAB work, same way?
OMG!
cab - copy to phone and run through file explorer
exe - run through pc/ or run directly from the device
to copy files over to your PPC...
click the explore button on your activesync app running on your desktop from there you can drag and drop the files anywhere
I drag and drop .cabs to my storage card, I have a cab folder with two folders inside one is device and one is card. It is an easy backup and reminds me of where i installed that particular cab. Now, if you have an .exe or .msi you can run that from your desktop and as long as you are synced the install wizard will install the app to your phone giving you the option to install it on the device or the card.
Now, some applications are meant to be ran from your phone, such as mplayer or Kaiser Tweaks. You copy the file over to your device and click the .exe when you want to run the program.
Hope this helps!
hi all
I'm sorry for asking this questions but i did a search and could not find any answer...
i have a Tytn 2 and I'm new to all this wm6 os, I've been trying to install SCLPC___0-04__WM05___WM06_ but i haven't been able to
could anyone please tell me how to install CAB files ?
thanks in advance
and sorry about the question
H
Cab files are relatively easy to install. Using an Activesync connection, hit Explore on the Activesync window and that will open up a window of your device. Click on MyWindowsMobile Device (or something like that). This is a view of the 'root' directory on your device.
Copy (drag and drop is easiest) from the desktop location to the window showing the 'root' of your device. Now, the CAB should be on your TyTN II.
(You can disconnect the Activesync connection now, if you want).
On the TyTN II, open up File Explorer and go to the root directory of your device (normally, this is the one it opens up on.).
Locate the CAB file you copied over, then double-tap it to execute it. Then follow any directions given. That's it!
/drt
Ok, use file explorer. Select the cab and run it.
i think i didnt explain myself properly ...
how do i install Nadavi_HTC_Camera_5_0_4_2915_00 i've tried to copy it to the HTC bot i could not install it after
thanks
Whats the extention of the file?
helder said:
i think i didnt explain myself properly ...
how do i install Nadavi_HTC_Camera_5_0_4_2915_00 i've tried to copy it to the HTC bot i could not install it after
thanks
Click to expand...
Click to collapse
Both your question and the answers were clear enough.
Once you have copied the cab onto your device, use the built in File explorer on the TyTN2 to find the cab file. Then just double click on it, the same as you would to open a Word file for example. Then just follow any on-screen instructions/requests. Simple as....
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Marridi said:
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Click to expand...
Click to collapse
Or for a longer version of this:
StarMonkee said:
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Click to expand...
Click to collapse
Do the following, hehe
When you download most programs they will be in .CAB format. Now all this means is that they can be installed DIRECT from the phone.
What I do is create a folder on my Diamond in Internal Storage called APPS and make sure my Diamond is synced to my pc / laptop using Activesync on XP or Windows Mobile Device centre if on Vista and then copy all the .CABS that i have downloaded into the APPS folder on my phone.
Once im ready to install the applications its very simple.
On your Diamond click on START and then PROGRAMS and locate FILE EXPLORER.
When FILE EXPLORER has loaded up in the top left of the window you will notice a memory card icon with the current directory you mobile is pointing to, push this and you will then see MY DEVICE and the location you are currently at.
If you have used a pc before its very similar to how the pc windows explorer used to navigate, anyway, select MY DEVICE and then choose INTERNAL STORAGE and then APPS.
Then its just a matter of selecting which application you wish to install as all the .CABS will be displayed. Select the one you want to install and follow the installation process.
If there are any small programs 1mb or less then I tend to install these onto my phone storage memory and for games I install them onto INTERNAL STORAGE but its up to you. Some programs require a SOFT RESET to work.
The SOFT RESET button is located where the STYLUS is stored on the phone, pull the STYLUS out and then you will see a RED BUTTON inside.
Push this and your phone will restart.
There is more information here at good ol xda-developers.com and also http://modmydiamond.info
Hope this helps!
Tom
thnx guys, but i know this, i did install some applications that end with caB, but when i tried to install the gsen or the advanced config for example, they didnt come in .CAB form. they came as zip and when i opened the file, all there was files and the one names setup was as xml.
i dont know, maybe i downloading the wrong files!! plz help? where do i download those files in .CAB format?
it worked, thnx guys..
xda is the best forum all around..
I downloaded a program called Flashlight, and I wanted to know how I could get it onto my all programs list, since it came as an .exe rather than a cab. Thanks in advance!
mchao92 said:
I downloaded a program called Flashlight, and I wanted to know how I could get it onto my all programs list, since it came as an .exe rather than a cab. Thanks in advance!
Click to expand...
Click to collapse
Either move the file to \Windows\Start Menu\Programs or Create a shortcut to the exe (Copy the file in File Explorer and Choose Paste Shortcut) there.
Ta
Dave
Ah! That did the trick. Thank you very much
doesn't work with GpsCompass
I installed a program called GpaCompass that doesn't show up in my win/startmenu/programs, so I copied and pasted the .exe there, I tried to cut/paste the .exe there, still no go. it gives me an alarm about microsoft.net, but i have 3.5 installed. I've tried using 2.0 as default AND 3.5 as default. not sure what to do. I'll try to include screenshot of error msg.
scottspa74 said:
I installed a program called GpaCompass that doesn't show up in my win/startmenu/programs, so I copied and pasted the .exe there, I tried to cut/paste the .exe there, still no go. it gives me an alarm about microsoft.net, but i have 3.5 installed. I've tried using 2.0 as default AND 3.5 as default. not sure what to do. I'll try to include screenshot of error msg.
Click to expand...
Click to collapse
Don't copy (or cut!) and paste the exe to your Startmenu/Programs folder. Instead you should copy and paste a SHORTCUT to the exe in your Starmenu/Programs folder. By pasting the exe file itself into your folder it is trying to execute from that folder when other files that it may need are in the installation directory somewhere else on your device.
So first, cut and paste the .exe back to where it was originally located. Next copy the exe and "Paste as shortcut" into your Startmenu/Programs folder
Thanks lots
@ Rumbal,
worked beautifully, thanks a lot! I apparently misunderstood other posts I had read about doing this. And , call me an idiot, but somehow completely overlooked "paste as shortcut", and only saw "paste".
Thanks
woot!
Thanks!
This is something I just learned as well. Now I'm going to go ahead and make all the shortcuts I want!
It took a while, but I didn't want to ASK and get flamed for it. Anyway, these forms are tens of thousands of posts deep....I knew the answer was here
Rock
Mitch
Thanks a lot for this info.
DaveShaw said:
Either move the file to \Windows\Start Menu\Programs or Create a shortcut to the exe (Copy the file in File Explorer and Choose Paste Shortcut) there.
Ta
Dave
Click to expand...
Click to collapse
Amazing trick...this worked without troubles, and it can be set manually mostly for portable applications which does not install in Program Files folder.
I just did a trick with portable Dreamweaver by simply copying the portable folder to the Program Files, and then copied and pasted Dreamweaver.exe shortcut in Star Menu\Programs folder....worked fine.
Thanx for ur tips...
I have just bought a HTC Diamond. I am new to the world of Windows Mobile.
So far the phone is great! I love it.
I have noticed you can download lots of apps and tweaks.
I want just wondering how to instal these programs on the phone.
I have downloaded a few games, Unzipped and copied over the files to the phone. It recognioses one of the games with a '.cab' format and it installed, but the rest are .xml.
Any pointers, tips and hints for this phone?
Cheers
the program you use to extract compressed files identifies cab files as compressed. All you need to do is copy the cab files to your phone and run the file from there. If you try to extract a cab file, you'll get those xml files you talked about.
1. Copy cab to phone
2. Run cab from phone to install the program
good luck
elcom said:
1. Copy cab to phone
Click to expand...
Click to collapse
Hi - my first post!
You mention .cab files... I expect this applies to .exe's as well (for example, hot fixes)???
Any particular folder(s) on the phone we should be copying these files to before running them? I tried to install a hot fix today, but after running the .exe and receiving a 'success' message, the phone restarts OK, but the fix does not appear to have worked.
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Rudegar said:
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Click to expand...
Click to collapse
Thanks for the response.
Unfortunately, running the exe on my PC (Win Vista) doesn't seem to work.
Error: "{C:\filepath\filename.exe} is not a valid Win32 application."
Any ideas? I'm a complete newb at this so have exhausted my very limited list of possible ideas...
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
OK thanks - I already tried running the exe straight from my Diamond, and although it appeared to work correctly, the hotfix didn't actually fix what it claimed to. Not to worry, I'm still learning all this stuff (only had my Diamond for a day and a half now... ).