new rom and BT patch - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I have upgraded the pda with the new rom, and yesterday I had a problem with the free hands per BT and I inserted him the patch of the BT, the thing is that from then on it goes me slower.
to somebody it passes him the same thing
greetings

Related

Imate Rom BT Stack version

I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Anonymous said:
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Click to expand...
Click to collapse
Hell, its worse than 'just awful'....
...The Bluetooth on the PDA2K is just downright unusable.....
...I am still holding my breath, praying to GOD they get a real fix out and not just a 'here ya go' patch with more problems in it......
BT version... MDA III new ROM
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
have a hcb-30 bluetooth carkit that worked great with my Qtek 2020, but i cannot seem to get it to work with my qtek 9090....it finds the qtek allright and pairs with it, but cannot connect....my bluetooth version is 1.0.0 build 2200...
hope they get a fix out soon...
Re: BT version... MDA III new ROM
lukasz said:
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
Click to expand...
Click to collapse
I'm running v1.0.0 Biuld 2200
Mine also likes to turn the unit on every minute or two and run the battery down VERY fast...........
onurd said:
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
Click to expand...
Click to collapse
You may tried that DON'T PAIR the HBH35, Afterwards, use a Bluetooth connection wizard to add it. This may be OK to add HBH35.
I don't know how those incompetent idiots could release the blueangel with such a obvious bluetooth problem, HOW CAN THEY NOT see it! the error messeges pops up so frequently.
Go for it, version 1.5
http://forum.xda-developers.com/viewtopic.php?p=65548#65548
I couldnt get 1.5 to work on my pda2k, cant overwrite certain files... how did you do it?
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
you don't have it yet and you are telling other people to go for it! i dont think it works for the pda2k
Did you read or post first?????????????????
As you can see Guest and firebird say it worked to some degree for them on the PDA2K (MDAIII). Since I didn't have a BT headset to try myself I thought I would help you by pointing you to someone who had.
Read posts before blasting back.
*********************
Guest
Posted: Mon Nov 08, 2004 06:20
Subject: BlueTooth manually updated on PDA2k to 1.5.081
--------------------------------------------------------------------------------
http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.
just a warning, the ROM files he was talking about overwriting, cannot be restored by doing a hard reset, it is permanent. if it messes up you will have to re-flash your pda with a new copy of the OS. that's what i had to do since i couldnt get it to work

New Bluetooth Stack for Qtek 9090

Hi all,
Since I think we all can agree to that Bluetooth on Qtek 9090 is ****e, I've been snooping around a bit, and eventually I managed to get a brand new upgrade from Dangaard
This patch upgrades the Bluetooth Stack from build 2200 to 3500, and I have experienced some great improvements since I upgraded the device. I’m not done testing yet, but I’ll let you guys know if I find something interesting. I can’t post the file right now because the only link I have to the internet at the moment is my GPRS connection, but it was my understanding that Dangaard will post it on their site within a few days anyway.
I’ll get back to you with more information soon.
Mojn.
cool, please let us know....
However, if you have such a good relationship with DAANGARD, could you please aske them about XDA2 and SE?
THANX
buzz
Found it
http://www.mywindowsmobile.dk/modules.php?name=Downloads&d_op=viewdownload&cid=24
The site is in Danish, but it says that you have to copy both files to the Qtek and then execute them from the file explorer. First do the WWE one, then the Patch file, and then make a soft reset.
That'll do the trick ;-)
Have fun.
Hi,
Has anyone tried these patches? Does it works?
Sam
samvds said:
Hi,
Has anyone tried these patches? Does it works?
Sam
Click to expand...
Click to collapse
I have installed them. Before these patches my Qtek 9090 would turn on by itself when I have paired to the bluetooth carkit. Now it does not do that anymore. I never had problems using the bluetooth carkit together with bluetooth TomTom. So I can not say whether the patches have solved the issues when using bluetooth headset together with navigating using TomTom bluetooth.
've installed and tested the BT patches. I had several problems with the BT headset that are now solved.
- Headset was not reconnected after power off and on again: solved
Now it behaves in a strange way, that the BT keeps connected while the device is powered off and when you turn it on again, BT turns OFF and then On again in a second and the headset is reconnected.
Let's see if this has an impact on battery, as prior the patch, the battery was going down dramatically if the headset was paired!
For the moment I can recomment it, I have a Qtek9090
bluetooth patch
It's a shame to make a path after selling a defecting device.
Each patch that i have tested doesn't work enaugh for me.
It resolve some bugs but audio quality and crackssss are already here.
I have qtek 9090 and motorola 850. Poor audio quality and i have to stay front of the device to speak. If i stay front of it work well.
Is there another patch to test after v3000 and V3200 because it doens't resolve audio quality and distance.
Im using the update from windowsmobile.no ( aka mywindowsmobile.dk )
Found this one
http://www.qtek.nu/default.asp?nc=9683&id=110&element=0
It should update
GSM Radio
Bluetooth MMS Klient
Fix the sound troubbles for the reciver of a call from the phone.
can be downloaded here :
http://www.qtek.nu/files/BA_WWE_BP_12200_126_10600.zip
I wont/cant do anything with it, since it will only install on Swedish 9090, but maybe some off you guys can get the important files out of it??
yep i agree can someone post the important stuff?
I have Swedish QTEK 9090 and i also had installed this new ROM.
It wont fix this well known Jabra and Qtek crackling problem.
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
XzaniX said:
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
Click to expand...
Click to collapse
All Rom's released in Scandinavien are English.
The installer checks the country code on the phone and wont installed if it's not Swedish.
Well it is suppose to not installe, but for some reason a Norwigean guy over at windowsmobile.no got it installed without problems.
It wont install on mine, bought in Norway.
Does anybody know where to change the country code??
download
Non of the links work, can someone post the cab file?

Updates: Feedback on BT3900, radio 1.06.02, Wlan patch

There are a couple of standalone updates around but not too much information about any improvements or otherwise with the Blue Angel variants. So lets post our results and see if these updates are worth upgrading to. My XDA IIs is running
latest rom 1.31
bt patch 3900
radio 1.06.02
Bt upgrade seems to have made minimal changes, maybe a touch louder but thats all, no other changes noticed
Radio 1.06.02; cant say i notice any changes here as i didnt have any calling problems with ver 1.02. I upgraded cos of a problem with wifi which is still there
Anyone have anything to note about the wlan patch? If there are any other patches i missed please post what they are and what effects it has had
Hi.
I have spent a while looking for the patches. Can you point me in the right direction?
I actually went back to the Dangaard BT stuff...version 3500 and patch. This worked better for me with my Logitech BT Headset.
I upgraded the radio also to 1.06.02...can't really say it made a difference, but hell, it didn't hurt either...
BT Build 3900
Hi.
Upgraded to Build 3900 from 3500, found on the FTP server.
Only dif. is that my SE HBH 300 is now faster do disconect a call when pressing the on/of switch.
I was fooling around alot with my BA the day i installed the Build 3900, and right after installing the patch i tested it without a Soft Reset. I got a perfect connection without any crackling noise and a really good distance.
After a Soft Reset it was back to the old crackling noise and poor distance.
And i just cant recreate the scenario i had that day
Radio, dont know. Dident have any troubbles with the old one.
Wlan patch, wating for others to tell.
I upgraded my radio rom to 1.06.02 and BT Stack 3900 and found the Bluetooth still crackled on my old jabra bt 200.. just bought a BT800 today and it appears to work better even the caller display works.. with the radio stack upgrade i have had quite a lot of problems connecting to known wifi access points even when all the correct details were in. I also could not connect to BTOpenzone when standing under the access point (and yep i do have an account on it) so I re flashed the radio rom back to 1.06.00 and bluetooth 3900 with high quality audio patch and it all back to normal with abit mor BT Stability :roll:
Jabra BT800 worked straight out the box with no patch needed and has good loud audio 8) and a range of 10 meters ish still a bit crackly at 5 meters though
Marqnet said:
... so I re flashed the radio rom back to 1.06.00 and bluetooth 3900 with high quality audio patch and it all back to normal with abit mor BT Stability :roll:
Click to expand...
Click to collapse
So what you are saying is that radio version 1.06.02 interferes with WiFi somehow....that is interesting... :shock:
Do you remember what happened with your WiFi strength when you turned of BT, or have you not tried that?
Cheers,
HappyGoat
Hi as far as i am aware so far there has been no real issue with the Bluetooth and wifi interfering with each other or should i say i have not experienced any problems. the i ssue was just around using wifi and its connectivity problems i have had with open and unencrypted access points and encrypted ap,s the radio could see them but not connect. my xda came with 1.06.00 as standard and i was curious to see what the latter radio rom would offer. so as i didnt work for me i decided to go backward on step and all seems weel now. will agree interesting one and after trying a number of different 1.06.02 files as i thought the first was corrupt i just decided to revert back to a known to me working rom.
radio version difference
what is the difference in radio version 1.02 v 1.06?

O2 XDA IIi Bluetooth with Bluetooth Car Kit Issues.

Hi Guys,
Recent got an XDA IIi after being with the older XDA II for over 16 Months.
But I have recently run into problems with my BT Car kit :
Motorola Bluetooth Car Kit HFW-8000.
Basically the problem is that it does not always connect to the Car Kit and when it does it will only from time to time connect and let me have a handfree conversation.
I have also used the Broadcom Bluetooth Cab file here in order to extend what Bluetooth Profiles that can be used but seems not to have any great bearing to stablize the issue.
So I went down the Hard Reset Road but again still intermittent issues, I then upgraded the ROM to the New one on the O2 Website the v 1.11.169 ROM.
I also had similar issues with the XDA II but it was resolved by using the Pocket Bluetooth tools, which was great and never once after installing it did I have any issues with the Car Kit.
http://www.bluetooth.jazztel.es/
One of my questions is, is there a similar programme to to above Pocket Bluetooth tools for the XDA IIi as I have tried it with the XDA IIi but does not work.
Or does anyone know how you would revert to have the XDA II radio or is there a work around for it.
Thanks Guys
Woody
Hi Woody_XDA,
I have had my XDA2i for a couple of months now and recently got a O2 blue headset for it, I had simular problems with the headset disconnecting and having to manually connect every time I switched it on. After browsing this wonderfull forum I decided to do a corperate install and get rid of the O2 active interface, since then no problems at all. I now use Pugs modified ROM version 162 with radio 1.04 and have no stability problems at all with no twice weekly reset. Hope this helps you and many thanks to Pug for his ROM.
Mace
Ditto, I also use the custom firmware with 1.04 radio and bluetooth works a charm. It still eats battery like nothing else, but it works with no problems. Also like the fact that the XDA can cope with my GPS receiver and my handsfree kit simultaneously, that's handy for in the car.
Cheers Guys for the information, took it on board and works great, did a great deal of stress testing in order to confirm it and works excellent..Thanks to PUG again and guys thanks for the info much appreciated and this is by far a great forum
Mace - you mention some bluetooth issues being resolved since you applied the custom ROM... I posted in the Alpine Applications forum here the other day a list of issues with bluetooth that I was wondering had been addressed - so far no reply - are these the symptoms that were cured for you??
Hi Bewlay Brother sorry, I missed your other post on Bluetooth issues, my original problem was that every time I switched on my BT headset , which is a O2 Blue, I had to open the BT manager and make the connection, the phone would then occasionally lose the connection and sometimes whilst still showing a connection refuse to transfer the call. This was using the official 162 ROM with the O2 active UI. I have since installed Pugs 162 ROM with radio1.04 and done a corporate install and BT seems to work perfectly, switch on the headset, it connects, never loses pairing and transfers calls.
Hope this helps you, and thanks again to Pug,
Mace.
Mace - what you describe sounds similar - my problems were essentially the loss of pairing with my Motorola headset a lot of the times when the XDAIIi switched off its display and went into stand-by mode, also if I closed the boom bike on the headset (to temporarily turn off the headset) it would fail to re-pair when I next opened the boom mike... the other issue was that I had to make sure the phone keyboard was displayed on the XDA once I had paired up otherwise the last number redial function on the headset would not work - if I pressed the dial button on headset and the phone display was not on the screen it would simply open the phone display function but fail to then dial the number - really crap. Also reception was poor to headset even over relatively short distances from the XDA. IF these areas in particular could be cured by the upgrade then I am eager to do it - I must admit I have read that this upgrade has not been without problems for some people here so it is going to be a tough call.
Just a thought, but have you done a personal or corporate install as I think the main fix with Pugs ROM was the upgrade to radio 1.04, which I don’t think affects the BT, so a corporate install with your existing ROM may make a difference.
Did a corporate install when it was new out of the box...
whats the difference between the corporate and personal install?
Corporate doesn't install ANY of the branded O2 interface - so no gubbins, nothing to slow down the phone, you just get a bog standard Windows Mobile 2003 SE installation, aside from the O2 GPRS and SMS settings. Bosh.
hi
i've been reading the posts and i have the same problem where can i get hold of pug's ROM if it's possible cos this seems to get rid of the problem
And then today, headset will not automatically connect, needing Bluetooth manager to be opened to make the connection. AARRRGH!
BT car kit problems
I have the 1.04 Radio, but it still won't sync with my 2003 BMW 325xi bluetooh or with my 2005 Acura MDX bluetooth.
Help!
Unstable Bluetooth Signal Strength - Samsung WEP200 Bluetooth Headset
Hi, I just got a Samsung WEP200 Bluetooth Headset. It would pair with my O2 XDAIIi but I cannot hear any voice in both incoming and outgoing calls. When I check the BT Manager, it shows a totally unstable BT strength that varies from very strong to very weak. The same headset worked well with other BT phones. My ROM version is 1.11.00 WWE, Radio version 1.04.00.
Any help would be greatly appreciated.

BT GPS (tomtom 5.21) and BT headset problem

Hi all,
first wanted to say that it is a great forum.
I just came across it couple days ago, and there has been many things that I found here that improved my Qtek 2020i.
but there is one thing that i havent found in here.
I use tomtom 5.21 with a bluetooth GPS receiver. it worked fine until I bought a bluetooth headset. If im using TT to navigate and answer a call via bluetooth headset it works fine, but when i hung up the call, then Qtek looses connection to GPS, then picks it up again in about 10 seconds but runs with a big delay. I have to restart tomtom and then it is back to normal (quite annoying when driving thru town)
any of you have that problem??
thanks for help.
Hi there,
My problem might be related : the device seems unable to use both the headset and the GPS (with TT) at the same time. I don't know why. I've got a Qtek ROM at the moment, I'll see if the latest O2 ROM with upgraded radio stack does any good.
See you.
Right. Just switched to PUG's .162 ROM with O2 stuff stripped.
Alas, it comes with Broadcom stack and there's no SPP inside so I can't connect to my GPS ... Pug if you read this, help
Cheers !
seems strange: I replashed my stock O2 bloatware & buggy 169 Rom with pug's flavour, to give me the 162 rom and Radio version 1.04.
My GPS bonds fine tihe BT, and I can use TomTOm and a BT headset at the same time. Did you flash the Radio to the (far better) 1.04) when you upgraded the Rom?
I've heard quite a few people say on these forums that for Alpine, one of the most stable & speedy setups is the 1.10 WWE Main Rom, the .162 Pug rom with the O2 stuff stripped out, and the 1.04 Radio.
Joe
Yeah actually it works fine now. I made another post while I was looking for help, because the Alpine wouldn't find the SPP service when interrogating the GPS. I simply switched the GPS off and back on, and the problem was gone. I wish I'd tried that before the dozen ROM combinations I spent the afternoon testing
And indeed, I'm now running 1.11WWE/1.04.00/1.11.162 PUGS w/o O2 stuff, and finally TT accepts to work with the headset while using the GPS. What a trip !
Cheers !

Categories

Resources