How To: Understand what an Extended Rom is.
The following Post is based on the I-Mate Extended Rom 1.22.162 out of PDA2k_WWE_12200_162_10600_SHIP
Understanding the Extended Rom:
- The Extended Rom is shipped as ms_.ndf and loaded with the BaUpgradeUt.exe
- The ms_.ndf is extracted on the first Hard reset (Power button pressed Stylist press) after upgrade
- The Extended Rom is hidden and read only
- The Extended Rom can un hidden with the following tool
ftp://xda:[email protected]_1_22/Tools/xda-developers _Unlocker.CAB
- The Extended Rom is limited to 16MB in size
- The Extended Rom starts the AutoRun.exe which reads the Config.txt
- The pointer for AutoRun.exe HKEY_LOCAL_MACHINE\Comm\AutoRun to \Extended_ROM\AutoRun
- The pointer for Config.txt HKEY_LOCAL_MACHINE\Comm\AutoRunCFG to \Extended_ROM\AutoRunCFG
- The Touch screen is disabled by the first command in the Config.txt and enabled by 2nd to last.
- The last Command of the config.txt does soft reset.
- The Extended Rom consist of *.CAB installation files
- The installation files fall into the following types
-- A) Applications: Album, Fax, Zip
-- B) Patches for the Hardware: Button9 on the Hardware Keyboard.
-- C) Patches for the software: Blue tooth upgrade.
-- D) Provider customizing: Splash screen, Internet Explore defaults.
- A Hard reset will NOT re-extract the ms_.ndf just do a reload of a clean OS thus also clean the register.
-- Thus what ever you put in that Extended Rom folder will remain.
- The \Storage will not be overwritten on a hard reset
-- Thus you are able to keep CAB files on that for installing after a hard reset.
- The Numbering of the Extended Rom is operator dependent.
-- Thus a Qtec version 1.22.225 might not have higher patches than a I-Mate version 1.22.62
- Extended Roms are built around the major OS release
-- Thus it is Not advisable to install patches from a Extended Rom 1.12.XX into a 1.22.XX
- The Extended Rom can be cooked (Changed to your own liking)
Warnings:
- Cooking you Extended Rom is at your own Risk
- Adding a Cab file to your Extended Rom that requires you to confirm, enter a key or do any input
** Whilst the Touch Screen is disabled ** Will Turn your device into a Paper Weight!!
-- (you will be stuck in the loading of the Extended Rom and will have to flash again)
How To: Find Info, Tools, Files to cook with ExtRom Kitchen
How To: Find Info, Tools, Files to cook with in The EXTRom Kitchen
Unlock tool:
ftp://xda:[email protected]_1_22/Tools/xda-developers _Unlocker.CAB
Thread on Unlock Tool
Unlocking Imate PDA2K extended rom
http://forum.xda-developers.com/viewtopic.php?p=78370#78370
Splashviewer files:
ftp://xda:[email protected]_1_22/Tools/Splashviewer/comdlg32_901.exe
ftp://xda:[email protected]/Splashviewer/MDA3_bootimage_changer2.CAB
ftp://xda:[email protected]/Splashviewer/nb_image_converter_859_418.exe
Thread on the Splashviewer:
CHANGING MDA III BOOT IMAGES TO YOUR LIKING
http://forum.xda-developers.com/viewtopic.php?p=66133#66133
Splash Screens:
ftp://xda:[email protected]/BlueAngel/Exteneded_ROM_Kitchen_1_22/Splash
Cab Extractor:
WinCE CAB Manager
http://www.ocpsoftware.com/products.php?nm=cecabmgr
Trail version has a limit of being able to be started 15 Times
er2003edit
The er2003edit is a tool to allow us to build custom roms before using the BaUpgradeUt.exe
At the moment IT DOES NOT SUPPORT the Blueangle.Info about this tool:
http://wiki.xda-developers.com/index.php?pagename=ER2003Edit
Extended Roms:
ftp://xda:[email protected]/BlueAngel/BlueAngel_Extended_Roms
Customization Operator Files
ftp://xda:[email protected]/BlueAngel/Exteneded_ROM_Kitchen_1_22/Customization_Operator
How to: Cook in the Extended Rom Kitchen
How to: Cook in the Extended Rom Kitchen
Preparations:
Step 1
Unlock the Extended Rom with the Un Lock Tool.
ftp://xda:[email protected]_1_22/Tools/xda-developers _Unlocker.CAB
Step 2
Edit the config.txt to remove the disable and enable touch screen commands.
Step 3
Edit the config.txt to remove the reset, You need to reset the device when you want.
Step 1
Down Load the ZIP_WWE.CAB extracted out of the T-mobile WWE Extended Rom 1.06.117.
ftp://xda:[email protected]/BlueAngel/Exteneded_ROM_Kitchen_1_22/WWE/ZIP_WWE.CAB
Ingredients:
ZIP_WWE.CAB
Your Device
Instructions:
Place the ZIP_WWE.CAB in your Extended Rom
in the \Extended_ROM\Config.sys add the following line
CAB: \Extended_ROM\ZIP_WWE.CAB
Click to expand...
Click to collapse
Serving the cooked Exteneded Rom
On the next hard reset you will have a COOKED Extended Rom with the added zip application
(and a clean OS with none of your loaded software)
Warnings:
Be aware of what you are installing and test it before hand.
Cabs fall into the following types
1) Un-removable: Cabs that install software however the can not be removed the "Remove programs" application (Fax)
2) Confirm: Cabs that ask for a registration key or need to be confirmed (Resco File Explorer)
Thus you need to be able to use the touch screen.
3) Error: Cabs that come up with the message such as "written for wrong version"
Thus you need to be able to use the touch screen.
4) Confused: Cabs that if executed by hand install fine.
if executed by AutoRun, install fine however then come up with the message that it will re-install itself.
Thus you need to be able to use the touch screen to say cancel.
5) Picky: Cabs that install a directory were they have been executed (splashPhoto).
\Exteneded_ROM\Dirname
6) Vanishing: Cabs that delete then selves after install (Extended Rom Unlock tool)
Thus you need a backup and are not very useful in extended rom.
The Extended Rom is Limited by size to 16MB thus not all your software can be placed in it.
This link goes into more details.
Auto install of applications, folder making & regcodes.
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
How To: Understand the I-Mate Extended Rom 1.22.162
How To: Understand the I-Mate Extended Rom 1.22.162
Config.txt Install order:
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\BA_Version_122.CAB
CAB: \Extended_ROM\CDL_ECall.CAB
CAB: \Extended_ROM\BA_Album_WWE.CAB
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\Fax_2.09_WWE_Unremovable_0720.CAB
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_12132004.sa.CAB
CAB: \Extended_ROM\JMM101257_WWE_1004.CAB
CAB: \Extended_ROM\Custimization_CDL_090904.CAB
CAB: \Extended_ROM\Default_ImateV112.001.cab
CAB: \Extended_ROM\Button9_PIE.sa.CAB
CAB: \Extended_ROM\OEM_BA_09080401.sa.CAB
CAB: \Extended_ROM\Default_BTsearchTime.sa.CAB
CAB: \Extended_ROM\OEM_ALL_122_04111601.CAB
CAB: \Extended_ROM\OEM_BA_CDL_11230401.sa.CAB
CAB: \Extended_ROM\OEM_WWE_124_008.sa.CAB
CAB: \Extended_ROM\OEM_Patche_12100401.sa.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Click to expand...
Click to collapse
Explanation of Files:
System Files
TPDisable.exe = Disable touch screen
TPEnable.exe = Enable touch screen
AutoRun.exe = Execution application
Config.txt = Config file read by AutoRun to execute the installation of the cab files.
Applications
BA_Album_WWE.CAB = Album Version 2.51 Build 16894
CallerID_wwe.cab = Photo Contacts (Caller ID) Version 1.17 Build 16965
Fax_2.09_WWE_Unremovable_0720.CAB = KSE Truefax Version 2.09
MMS_v2.0.0.13_BA_WWE_12132004.sa.CAB = MMS Composer Part of messaging
JMM101257_WWE_1004.CAB = MIDlet Manager Version 10.1.2.57 Build 20040705
MIDI561.CAB = Ring Tone Plug-in Player: Adds file \Windows\RTPlugIn.dll
Customization General:
BA_Version_122.CAB = Set Extended Rom version number to 1.22.126
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion] "MSYSTEM"="1.22.162 WWE"
CDL_ECall.CAB = Sets
[HKEY_LOCAL_MACHINE\Security\ECall]"List"=hex(7):\ 39,39,39,00,31,31,32,00
Default_BTsearchTime.sa.CAB = sez
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\BtConfig\General] "InquiryDuration"=dword:00000019
Customization Hardware:
Button9_PIE.sa.CAB = Set the buttom9
(Hardware keyboard the red one) to Internet explorer calling the link "I-Mate"
Patches:
OEM_WWE_124_008.sa.CAB = Major Bluetooth upgrade replacing:
BTAudioGW.dll, BTBusinessCard.exe, BtCeBCSPTrans.dll, BtCeIf.dll, BTCeOsif4.dll, btcepan.dll, BTCePimCmdApp.exe,
BtCeProfiles.dll, BtCeSendTo_Poom.dll, BtCeStack.dll, BTChooserLib.dll, BTConfigCE.cpl, BTConnManagerCE.exe,
BtContextMenuPE.dll, BtCoreIf.dll, BTCplCE.exe, BTDialer.dll, BTFileExplorer.exe, BTPanManagerCE.exe, BtPhoneIf.dll,
btrez.dll, BtSdkCE30.dll, BTTrayCE.exe, BTWizardCE.exe, BTWizardHfp.dll, BTWizardProfiles.dll, HFPControlPanel.dll,
HFPUI.exe, SdkCE.dll, wbtapiCE.dll, ace_ddi.dll, acevidcap.dll, ahioem.dll, Serial_Cmd.dll, tiacxwln.dll, AudioGW.dll,
FrontLight.dll, Keybddr.dll, Serial_BTUR.dll, Wavedev.dll, atihwtbl0.txt
OEM_Patche_12100401.sa.CAB = Minor Bluetooth upgrade to date stamp 10.12.04: Replaces files BTConnManagerCE.exe & AudioGW.dll (Final version!!)
OEM_BA_09080401.sa.CAB = Wireless manager to upgrade date stamp 20.08.04: Replace files: WirelessMgr.exe.0409.mui & WLanMgr.exe (date stamp 20.08.04)
OEM_BA_CDL_11230401.sa.CAB = Battery.dll upgrade to date stamp 01.11.04 Replaces files Battery.dll
OEM_ALL_122_04111601.CAB = Upgrades the following files: ace_ddi.dll, acevidcap.dll, ahioem.dll, AudioGW.dll, Serial_BTUR.dll, Serial_Cmd.dll, tiacxwln.dll
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Patch]= "Version"="OEM_ALL_122_04111601"
Note that the AudioGW.dll is again replaced however the final version is found in OEM_Patche_12100401.sa.CAB
Customization Operator:
Custimization_CDL_090904.CAB = I feel that this copies the default.htm patches it with I-Mate and Club i-mate then copies it to "\Windows\default.htm"
Two gif files are around (Operator.gif & Clubimate.gif)
Default_ImateV112.001.cab = Set up the default Spalsh1.nb & Splash2.nb and configures links to I-mate
More Detailed view of the Files can be read in:
ftp://xda:[email protected]_1_22/Docs/I-Mate_WWE_1.22.126_ExtROM.doc
Files need for the Exteneded Rom Kitchen
** Files need for the Exteneded Rom Kitchen **
Please up load some Exteneded Roms version 1.22 from your Operator to:
ftp://xda:[email protected]/BlueAngel/BlueAngel_Extended_Roms
Use the format Operator_Language_Version Number.
This will allow us to extract Splashscreens.
Find the Customization per Operator files
See what new patches are out to update.
We can Thus update our devices.
Thanks
:shock:
Well I don't need it since I managed to make my stuff work thanks to Buzz Lightyear, but WOW Great job !
We should keep this great thread safe
MDA User III:
A piece of very compehensive information. Good work !!!! Hope you can give us some hints on operator ID errors.
Cooked Rom Kitchen Ver 1.22.01 WWE
Thanks for all the new 1.22 Exteneded Roms that you have all uploaded (NOT).
Anyway:
if we take our base as I-Mate_PDA2K_Ext_ROM_122162_WWE
If we add to QTEC_BelDT_Ext_ROM_122557_WWE
We end up with CRK_RomKItchen_Ext_Rom_122001_WWE
Ver 1.22.001 WWE
Have added: Pdf reader
ftp://xda:[email protected]/WWE/ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
Have added: Zip
ftp://xda:[email protected]/BlueAngel/Exteneded_ROM_Kitchen_1_22/WWE/ZIP_WWE.CAB
Findings: on QTEC_BelDT_Ext_ROM_122557_WWE = Well its poor!
Check it out for your self:
ftp://xda:[email protected]/BlueAngel/Exteneded_ROM_Kitchen_1_22/Docs/Rom_Kitchen_122.xls
Request:
Would somebody with QTEC_BelDT_Ext_ROM_122557_WWE Please check the Version Build number:
Album
Photo Contact
New Roms would be nice.
Hint:
You can download the 2 cabs and just run them of your device.
They will install without an entry in the "Remove Programs"
Info
Have extracted the spash1/2 of Tmobile / NZ Com / Qtec
Have added the custom files
Off Topic
@ leochan2005:
Read your PM, then I will help.
@ Daimaou:
Thanks for the flowers
How To: Understand the Orange 1.22.170 WWE Ext ROM
Orange_SPVM2000_Ext_ROM_122170_WWE_AZERTY_France
Can be found under:
ftp://xda:[email protected]_Ext_ROM_122170_WWE_AZERTY_France.rar
Config.txt reads
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\BA_Version_122.CAB
CAB: \Extended_ROM\BA_Album_WWE.CAB
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
CAB: \Extended_ROM\Java_V10.1.2.49_BA_WWE_0901_unremovable.CAB
CAB: \Extended_ROM\KSE_Fax_v2.09_BA_WWE_0720_unremovable.CAB
CAB: \Extended_ROM\MMS_v2.0.0.16_BA_WWE_20041115.CAB
CAB: \Extended_ROM\OEM_BA_04112301_WWE.sa.CAB
CAB: \Extended_ROM\OEM_BA_11230401_WWE.sa.CAB
CAB: \Extended_ROM\Default_BTsearchTime.sa.CAB
CAB: \Extended_ROM\OEM_WWE_124_008.sa.CAB
CAB: \Extended_ROM\OEM_Patche_12100401.sa.CAB
CAB: \Extended_ROM\BroadcomCorp_BTUpdate.CAB
CAB: \Extended_ROM\Orange_WWE_Customize.sa_041203.CAB
CAB: \Extended_ROM\Button9.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Click to expand...
Click to collapse
It is a subset of the base of I-Mate_PDA2K_Ext_ROM_122162_WWE
and by far better than QTEC_BelDT_Ext_ROM_122557_WWE
Upgrades on the rom
Orange MMS_v2.0.0.16_BA_WWE_20041115.CAB
I-Mate MMS_v2.0.0.13_BA_WWE_12132004.sa.CAB
New Update on this rom
BroadcomCorp_BTUpdate.CAB
Adds the following files Date stamped 12.10.2004
BtAvUI.dll, BtCeAvIf.dll, BtHidPlugIn.dll, BTRezAV.dll, BTRezHID.dll, BtWizardAv.dll, BtWizardHID.dll
Sets the following.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"Dll"="btceavif.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\BtConfig\UserInterface\ServiceIcons\AV]
"Icon"="btwizardav.dll,32015"
"IconConnected"="btwizardav.dll,32014"
"UUID"=dword:0000110B
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\BtConfig\UserInterface\ServiceIcons\Hid]
"Icon"="btwizardhid.dll,25513"
"IconConnected"="btwizardhid.dll,25512"
"UUID"=dword:00001124
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Connection Wizard\AddIns\AV]
"Description"="btrezav.dll,32002"
"Dll"="btwizardav.dll"
"Icon"="btwizardav.dll,32002"
"Order"=dword:00000005
"Title"="btrezav.dll,32001"
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Connection Wizard\AddIns\Hid]
"Description"="btrezhid.dll,25501"
"Dll"="btwizardhid.dll"
"Icon"="btwizardhid.dll,25511"
"Order"=dword:000000ff
"Title"="btrezhid.dll,25500"
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Plugin\AV\AutoLoadOnStackShutdown]
"ActionType"=dword:00000002
"LoadPath"="\windows\btavui.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Plugin\AV\AutoLoadOnStackStartup]
"ActionType"=dword:00000003
"LoadPath"="\windows\btavui.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Plugin\Hid\AutoLoadOnConnect]
"ActionType"=dword:00000002
"LoadPath"="\windows\bthidplugin.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Plugin\Hid\AutoLoadOnStackShutdown]
"ActionType"=dword:00000002
"LoadPath"="\windows\bthidplugin.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Plugin\Hid\AutoLoadOnStackStartup]
"ActionType"=dword:00000003
"LoadPath"="\windows\bthidplugin.dll"
Click to expand...
Click to collapse
Splash Info
The Splash sreenes are basic windows logo.
There is a orange logo that is also added I am not sure if this is on the spalsh afterwards.
ERK Ver 1.22.002 WWE:
Have added: MMS_v2.0.0.16_BA_WWE_20041115.CAB
Ftp//xda:[email protected]/BlueAngel/Exteneded_ROM_Kitchen_1_22/WWE/MMS_v2.0.0.16_BA_WWE_20041115.CAB
Have Added BroadcomCorp_BTUpdate.CAB
ftp://xda:[email protected]_Kitchen_1_22/WWE/BroadcomCorp_BTUpdate.CAB
Findings: on Orange_SPVM2000_Ext_ROM_122170_WWE_AZERTY_France = Almost on par with I-mate 162! Even has Clearview .
Check it out for your self:
ftp://xda:[email protected]/BlueAngel/Exteneded_ROM_Kitchen_1_22/Docs/Rom_Kitchen_122.xls
To Whoever uploaded, thanks you can delete the old file of the root if you dont need it for somebody else. and Can you post your version for Album, photo contact and BT.
O2_IIs_Asia_Ext_Rom_11295.WWE Part of the 1.31
O2_IIs_Asia_Ext_Rom_11295.WWE Part of the 1.31
This Extended Rom is to say the least "[bI]nteresting[/b]"
It comes with a grand total of 77 Files
It set up the following Carriers:
Default, 1O1O, 3-DUALBAND, AIS, Celcom, ChungHwa Telecom, DiGi, DTAC, Globe, IM3, M1, Maxis, New World Mobility, One2Free, Optus, ProXL, Satelindo, SingTel, Smart, SmarTone, StarHub, StarHub Prepaid, Sunday, Telkomsel, Telstra, Vodafone Australia,
It does this by first running its
1) normal Autoinstall.
2) Allowing the Touchsceen
3) Changing the satatus of the buttons
4) Loading a daialog moduale
5) Copying a new autoconfig.txt file to the device
6) Running a autoconfig.exe.
This is in fact a feat as the file CAB: \Extended_ROM\6inone.CAB
Which is seen in every carrier of the Autoconfig.sys can't be found.
I also did not find it in the cabs that I looked at and no I dd not look at all 77.
I Have have done a ERK cleaned up of the files and moved them to carrier directories for better viewing
don't install this its just to work with
ftp://xda:[email protected]_Asia_Ext_Rom_112295.WWE_NewDirStructure.rar
The original remains
ftp://xda:[email protected]_Roms/O2_IIs_Asia_Ext_Rom_11295.WWE.zip
Splash Info
To many so did none.
Up / Down Grades
It upgrades the camera
Camera_Patch_10080401.sa.CAB (to Camera.exe 22.09.04)
ftp://xda:[email protected]_1_22/WWE/Camera_Patch_10080401.sa.CAB
It Downgrades the Wireless manager
By replacing STK.exe = 02.09.04
This is a downgrade
Base STK.exe = 22.10.04 after all upgrades.
New Stuff
It adds
CW-Album-Association.CAB
Which are Reg Entries
ftp://xda:[email protected]_Kitchen_1_22/WWE/CW-Album-Association.CAB
It adds
DialerSkin_Portrait_091104.sa.CAB
DialerSkin_Portrait_091104.sa.CAB
Be warned these cabs will create a bad looking background on your phone.
Findings:
O2_IIs_Asia_Ext_Rom_11295.WWE is a pain to work with and should be left to those that feel they need it.
Check it out for your self:
ftp://xda:[email protected]/Docs/ERK_O2_IIs_Asia_Ext_Rom_112295.WWE.Doc
Config.txt
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\BA_Album_WWE.CAB
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_O2Asia_0913.CAB
CAB: \Extended_ROM\ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
CAB: \Extended_ROM\Java_V10.1.2.49_BA_WWE_0901_unremovable.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Extended_ROM\o2_connect_iis.cab
CAB: \Extended_ROM\Camera_Patch_10080401.sa.CAB
CAB: \Extended_ROM\CW-Album-Association.CAB
CAB: \Extended_ROM\DelAddStarMenu_092404.sa.CAB
CAB: \Extended_ROM\O2_Base_09240402.sa.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\Version_BA_112.sa.CAB
CAB: \Extended_ROM\OEM_BA_09240401.sa.CAB
CAB: \Extended_ROM\LoadDialogInit_MS_10150402.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
EXEC:\Extended_ROM\TPEnable.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
Click to expand...
Click to collapse
Autoconfig.txt
;Remark
[Default]
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\O2_Default.sa.CAB
EXEC:\Extended_ROM\UpdateStartMenu.exe
RST: Reset
[1O1O]
CAB: \Extended_ROM\O2ASIA_1010_Customization_0923.CAB
CAB: \Extended_ROM\1O1O_ALL.sa.CAB
RST: Reset
[3-DUALBAND-]
CAB: \Extended_ROM\default.sa.CAB
CAB: \Extended_ROM\6inone.CAB
CAB: \Extended_ROM\O2ASIA_3DualBand_Customization_0923.CAB
CAB: \Extended_ROM\3-DUALBAND_ALL.sa.CAB
RST: Reset
[AIS]
CAB: \Extended_ROM\default.sa.CAB
CAB: \Extended_ROM\O2ASIA_AIS_Customization_0923.CAB
CAB: \Extended_ROM\AIS_ALL_100104.CAB
RST: Reset
[Celcom]
CAB: \Extended_ROM\default.sa.CAB
And on
And on ect bla bla
Click to expand...
Click to collapse
The Information for the following Extended Roms
I-Mate 1.22.162 WWE
Qtec 1.22.557 WWE
Orange 1.22.170 France WWE
02 Asia 1.22.925 WWE (Part of CE 1.31)
Has Been Ported to Wiki
The following Exteneded Roms Have also been updated
Orange UK 1.22.139 WWE
O2 UK 1.12.178 WWE
T-Mobile UK 1.06.117 WWE
QTEC 1.22.167 WWE
QTEC 1.12.121 WWE
Siemens 1.20.115 WWE
I-Mate Arabic 1.31.112 WWE
Wiki Blue Angel Home Page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Wiki Blue Angel Extended Rom Kitchen
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
The Orange UK one should have read 1.12.139, so I've corrected on wiki.
I've also just gone through looking at Orange UK 1.31.124. I'll put the doc and updated XLS on the FTP site when I'm done here.
A thought though.... The ERK is currently based on 1.22 CE, but more people are going to 1.31. I've added my 1.31 info to Rom_Kitchen_122.xls and marked as 1_31.01. But logically it should go in a _131.xls doc.
Also I haven't reported the base versions since I've imediately done a ExtRom install, which I note Orange is still using doengrade versions of WirelessMgr, WLanMgr and WModem.
RTP
Thanks for your help.
I know that the base is based on 1.22.
Alas I can't see what the differnece between 1.22 and 1.31.
Both report the same CE version and Build.
If you look at the I-Mate 1.22.162 WWE ERK_1.22_Base vs the I-Mate Arabic 1.31.112 WWE ERK_1.22.010 you will find that they ship the same files however in the 1.31 version the BT upgrade is missing.
I have asked Bebbo to have a better look into the file dates in the hope of finding out if the shipped MS file is infact an combination of the CE and added patches (in this case BT)
The same is true if you look at Orange UK 1.12.139 WWE ERK_1.22_004 Vs the new Orange 1.31.124 UK (in the Kitchen Entrance) on a short look the only diff I can see is that BA_OEM_PA_STK.sa.CAB is missing in 1.31.
Here to one would need a person who has 1.31 CE installed to check file dates.
Did you notice that I-mate 1.31 is using the setup.exe and orange is back on the config.txt?
Think you would mind also updating wiki with Orange UK 1.31.124 after you have cooked it and thanks for your help.
Yep, not sure what is new apart from the Bluetooth patches. However, at least that means the pataches aren't clogging up the ExtendedRom.
I did notice that is doesn't include the patch to Add the HQ Audio and Keyboard profiles to BT.
Yes, the STK update has gone. Also they have changed the help file from OrangeUK_Help.sa.CAB to OrangeUK_Help_102804.sa.CAB. However, going into downloads on the PDA, there is still a 432K Help update available for download - ContactsWiz and EmailWiz.
Yep, just going off to do WiKi now.
Of course if we could get the .nbf files open, we could check the files from there, rather than by doing an arduous check on the PDA.
By the way, did this latest update by installing ExtRom by hand, then doing just the CE and Radio rom updates. Worked pretty well. Though I didn't need the Radio update.... Cuts down upgrade time.
Just had a PM from Bebbo.
1.31 (I-mate) has the BT patches in the CE Base. I have asked him to check the file dates of the other patches that were missing based on the info I posted on the 1.31 Arabic.
Think you could do the same.
He has dropped his autorun.exe (which calls setup.exe) and gone back to the old version with config.txt
So what we know is 1.31 is not just a name change but a upgrade.
Looks like I will have to open a 1.31 kitchen, create a new base, oh what fun! Every time I check the site a new Ext Rom Pops up.
Looked at the cabs and dates:-
- Includes OEM_WWE_124_008.sa.CAB or at least the date on 1.31 is 10/12/2004 for BTWizardCE and the cab date is 9/12/2004. I would guess the date difference is as a result of repackaging of the files for inclusion in the firmware rather than as a patch. Version is 1.0.0.3500.
- Includes OEM_Patche_12100401.sa.CAB. Again a date discrepancy on AudioGW.dll. 1.31 is 13/12/2004, cab is 10/12/2004
- Don't know if it includes OEM_BA_04112301_WWE.sa.CAB because this seems to be the same as BA_OEM_PA_Remove_WiFi_Logo_WWE.sa.CAB which I have installed from Orange ExtRom 1.31.124
- Doesn't include BroadcomCorp_BTUpdate.CAB which is the HQ Audio and Keyboard profiles (I think).
- Doesn't include Default_BTsearchTime.sa.CAB which does what it says on the tin.
- Doesn't include OEM_BA_11230401_WWE.sa.CAB which is something to do with battery life and has a Microphone registry update.
So it looks like it includes the base BT update, or a very similar version as to make no difference. But doesn't include some other less fundamental patches.
This is more or less what I found except I feel that the upgrades in OEM_Patche_12100401.sa.CAB are NOT pre-installed as the dates in this patch are newer than the supplied ones in the CE ROM (Though I need to extract them to find version numbering to be sure).
Mind you, I have at some point installed the OEM_ALL_122_04111601.CAB file which seems to DOWNGRADE the AudioGW.dll so maybe I was looking at this one on the PDA instead of the pre-supplied one!
I need to refresh my PDA as I have installed so many things on there it is difficult to know which dll's and exe's are originals.
If you still have a clean install RTP could you copy the AudioGW.dll and BTConnManagerCE.exe to windows and see if they have a version number inside them so I can compare with the ones in OEM_Patche_12100401.sa.CAB?
On another point, in the kitchen you are stating that you should install:
1) OEM_ALL_122_04111601.CAB
then
2) OEM_WWE_124_008.sa.CAB
However, I'm sure that 124 contains newer versions of the files installed by 122 and therefore 122 is not needed (Some are newer the rest are the same but everything in 122 is covered by 124). In fact, it is probably not wise having it in the install because if you install it POST 124 it will DOWNGRADE some of files!
Bebbo, I'd agree with your thoughts on the 122/124 patches. I think this comes of the 122 being in the 'Base'.
Perhaps the Base should be cut back to being just the nk.nbf contents (and maybe radio.nbf), rather than including a random OEM's ExtRom.
That way you could more easily remove something from the ERK, when replaced by a newer upgrade.
I have not contributed much as yet to the ERK as I have been finding the most STABLE version I can rather than following what is supplied by manufacturers as the "latest and greatest" updates. In addition to this I do not use some of the other "features" supplied as standard (Such as ringtones) so I do not install these items.
I find the ERK fairly useful for finding what is available in each cab file but other than that I pick and chose what cab files to install (Such as leaving out Caller_ID and the OEM_ALL_122 patch).
I would feel that a simple xls file describing ONLY the cab files available, their function and where to locate them along with individual sheets on their file structure such as dates, version numbers etc would be of more use to me in compiling my own ER. In fact, on my next day off I might (If you dont mind) take some of the work you have done and create a new xls doc with information formatted in this way?
Looks like I have been missing out on a chat.
I have set up the ftp site for 1.31
I have set up a 1.31 spreadsheet
I have set up a 1.31 base and cooked page on wiki
I need to move the o2 asian rom over to 1.31
@ Bebbo
I to would like to see a better solution to what the patches / cabs are.
The information about them is in fact on wiki, based on the ERK that they were found in.
The file dates are around in the Cooked Erk and if you go into the details doc you will find screen shots of the Cabs.
This is all fine if you know what you are looking for.
Alas as seen by myself over the last 4 hours I have to hunt for info on OM_some_name.Cab.
The wiki site has the flyover funtion, that I don't understand how it works, or better said I have not found the time to look at it.
I would Think that it would be useful to have:
Name OM_some_name.Cab
Short text = Upgrade of BT to 1.456
Type = Application / Reg Entries only / Patch / System File
Reg Entries = Yes / No (If yes pints to some other page)
Files supplied = BTPatch.exe 12.12.04
Other info: This is a update of OM_XXX_SD.Cab
More info = Points to page if need
For large application like Album just the version number as I would not want to go through 30 odd files.
Now are you realy planning to have a day of ? Add all the Flyover stuff ?
Related
I installed the Qtek update 126
when I turn on bluethooth everything works fine.
when I put my phone in standby, the bluethooth light will remain on, but when turned on again. You will see the bluethooth indicator switch to off and then on again.
I need it to stay always on, How can I do this ? is this a registry setting.
(side effect, because of this, my headset will not function currectly)
First I would think that you mean Qtec Ext Rom 1.22.126
I have not seen the EXtrom 1.22.126 (might like to upload it).
I would think that its about the same as the 1.22.121 which has no BT patches.
I would sugest that you visit the kitchen on wiki and download the other patches based which you will find in the new base.
I'm sorry,
but for the record this is what i currently got
rom version: 1.22.00 WWE
radio version: 1.06.02
extrom version: 1.22.126 WWE
after the rom update
I installed the 2 BT patches
I even installed the new patch 1.500 (or was it 1.600)
anyway still same problem.
so what do you suggest ?
well u could start by telling us what the patches are as in the name of them
OEM_WWE_124_008.sa.CAB
OEM_Patche_12100401.sa.CAB
that didn't solve it
then tried
OEM_WWE_160_600.sa.CAB
same problem
can u post config.txt of 1.22.126 ?
Can u upload 1.22.126 so that we can pass it throug the kitchen?
Did you check the kitchen? as in did u look at the new base to see if u r mising something.
And last were did u get the 160.600.cab from?
Gee its more fun asking than answering, sorry
here is the config.txt
-----------------------------------------------
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\BA_Version_122.CAB
CAB: \Extended_ROM\BA_Album_WWE.CAB
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
CAB: \Extended_ROM\Java_V10.1.2.49_BA_WWE_0901_unremovable.CAB
CAB: \Extended_ROM\KSE_Fax_v2.09_BA_WWE_0720_unremovable.CAB
CAB: \Extended_ROM\MMS_v2.0.0.16_BA_WWE_20041115.CAB
CAB: \Extended_ROM\Button9.CAB
CAB: \Extended_ROM\BA_OEM_PA_Remove_WiFi_Logo.sa.CAB
CAB: \Extended_ROM\OEM_ALL_122_04111601.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
--------------------------------------
Are you sure nobody has posted this extended rom already ?
where can I put it ?
The way I understand the situation is before you moved to Qtec Ext Rom 1.22.126 you had no problems.
Based on the your T-Mobile signature I must presume that you upgraded from T-Mobile UK 1.06.117 WWE.
Config.txt
EXEC:\Extended_ROM\CallerIDInstall_WWE.exe
EXEC:\Extended_ROM\RestartRadio.exe
EXEC:\Extended_ROM\TPDisable.exe
EXEC:\Extended_ROM\Run_BTTrayCE_10.exe
CAB: \Extended_ROM\Album_EnableStreaming.CAB
CAB: \Extended_ROM\Album_BA_MMSFiletr.CAB
CAB: \Extended_ROM\Busytone.CAB
CAB: \Extended_ROM\BA_Album_WWE.CAB
CAB: \Extended_ROM\ClearVue_WWE.CAB
CAB: \Extended_ROM\ZIP_WWE.CAB
CAB: \Extended_ROM\Run_BTTrayCE_10.CAB
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_WWE.CAB
CAB: \Extended_ROM\patch.CAB
CAB: \Extended_ROM\TMDUKCustomize.sa.CAB
CAB: \Extended_ROM\TMO_DialSkin.CAB
CAB: \Extended_ROM\TMD_AP_UK.CAB
CAB: \Extended_ROM\T-zoneuk.CAB
CAB: \Extended_ROM\T-MOsetting.CAB
CAB: \Extended_ROM\GPRSMonitor.CAB
CAB: \Extended_ROM\VideoMMS.CAB
CAB: \Extended_ROM\Fax_WWE.CAB
CAB: \Extended_ROM\version.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Looking at that rom I find:
Run_BTTrayCE_10.exe and Run_BTTrayCE_10.CAB.
Now as I cant take the Run_BTTrayCE_10.exe apart I have not added this to the kitchen.
Looking at what you have done so far this is what I can work out.
BA_OEM_PA_Remove_WiFi_Logo_WWE.sa.CAB
WirelessMgr.exe = 14.07.2004
WirelessMgr.exe.0409.mui = 20.08.2004
WLanMgr = 20.08.04
STK.exe = Not shipped
This is a downgrade
Base Reports = 22.10.04 after all upgrades.
This is a Wifi issue and should not effect BT.
There is the following Patch around
BA_OEM_PD_BT_Headset.sa.CAB
21.09.2004 HFPUI.exe
23.09.2004 BTAudioGW.dll
23.09.2004 BtCeStack.dll
This is downgrade of
Base = OEM_WWE_124_008.sa.CAB
You have installed
OEM_WWE_124_008.sa.CAB
OEM_Patche_12100401.sa.CAB
Kitchen Base suggests that you should install.
Wireless manager ; OEM_BA_09080401.sa.CAB ; 20.08.04 Date Stamp
Patch Audio serial ; OEM_ALL_122_04111601.CAB ; 122_04111601
Major Bluetooth Upgrade ; OEM_WWE_124_008.sa.CAB ; 124_008
Minor Bluetooth Upgrade ; OEM_Patche_12100401.sa.CAB ; 10.12.04 BTConnManagerCE
Broadcom Bluetooth Upgrade ; BroadcomCorp_BTUpdate.CAB ; 12.10.04 5 files
I would suggest the following.
Copy the need roms out of kitchen base onto your device
Edit the config.sys to reflect the changes
Lock and Hide the Ext Rom
Hard reset the device.
Check if it solves the probelm.
If this is not the case
Add Run_BTTrayCE_10.exe to the front of the list
EXEC:\Extended_ROM\TPDisable.exe
EXEC:\Extended_ROM\Run_BTTrayCE_10.exe
Click to expand...
Click to collapse
Add Run_BTTrayCE_10.CAB as the first cab after applications
Add the rest of the cabs out of the kitchen as per above.
Hardreset your device.
Check if it solves the probelm.
Report your conclusions and we will take it form there.
Upload your uncooked rom Qtec Ext Rom 1.22.126 to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS/
Oh yes and have fun.
I'm at work right know so I will try this later tonight.
Also I upgraded from DUTCH T-mobile rom
I don't know what the differance is between those two
Oke
I uploaded the rom:
ftp://xda:[email protected]/New_ROMS/QTEC_9090_Ext_ROM_122126_WWE.rar
I will try the cooked rom later tonight
need to train first
--------------------
I found the files you recommanded
but what do you want me to use as base extend rom. My current: QTEC_9090_Ext_ROM_122126_WWE
and what files do I need to remove from this current extended rom.
Hum
Would it be unfair to say that Exteneded Roms are like your privat parts.
You get to play with them and only a few get to see them,
My self I use the I-mate and the stuff I need out of the kitchen.
This is your call, the things you might like to keep were your customizing files.
Best thing is read wiki, work out what you think you need, flush your rom, and install the rest of the cabs by hand, this way you dont need to do a hard reset. Copy a config.txt over if you feel happy with what you have done.
I will cook that rom now and post the info in about an hour.
I found this new rom on the ftp and I don't like it.
1) Its not an orginal ship.exe
2) the nbfs have been modified and now read T-MOB101
3) The ext rom has splash screens from qtek and kpn
4) the header info of the CE rom reads 1.22.00 and not 1.31.00
5) Its a type I rom which I find hard to believe as its ment to be a 1.31.00
The file can be found in uploads I will not move it or add it to wiki untill I see an original ship.exe. I also have not added a link. Use at own risk
XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar
Please be kind enough to only upload original ship.exe or else define them as baked. (added nbfs from other sources)
config.txt extracted out of ms_.nbf with new tool
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Caller_ID_BlueAngel_Generic_CHT_RC15.CAB
CAB: \Extended_ROM\Caller_ID_BlueAngel_Generic_CHT_RC15_Reg.CAB
CAB: \Extended_ROM\Camera_Wizard_BlueAngel_CHT_RC16.CAB
CAB: \Extended_ROM\Camera_Wizard_BlueAngel_CHT_RC16_REG.CAB
CAB: \Extended_ROM\HTC_PR_Camera_CHT_reg.CAB
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MIDI_CHT_reg.CAB
CAB: \Extended_ROM\MMS_v2.0.0.16_BA_CHT_20041115.CAB
CAB: \Extended_ROM\ClearVue2.4.386_CHT.CAB
CAB: \Extended_ROM\TaoJava10.1.2.49_CHT_BA_0823.sa.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Extended_ROM\o2_connect_iis.cab
CAB: \Extended_ROM\O2_Base_101904_CHT.sa.CAB
CAB: \Extended_ROM\BA_O2Asia_PA_Remove_WiFi_Logo_CHT.sa.CAB
CAB: \Extended_ROM\O2Asia_hhcb2117_ECall_StartMenU_CHT.sa.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\LoadDialogInit_MS_10150402.sa.CAB
CAB: \Extended_ROM\Version_BA_131.sa.CAB
CAB: \Extended_ROM\BandSel_BACHT_12210401.sa.CAB
CAB: \Extended_ROM\O2AC_Wmodem_Xbackup.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
EXEC:\Extended_ROM\Set_DefaultLCID.exe
EXEC:\Extended_ROM\TPEnable.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
Its an orginal ship.exe, I reload last night
The ext.ROM which max with O2 Asia Rom , I will post tonight
Hi mwang
Its an orginal ship.exe, I reload last night
Click to expand...
Click to collapse
It can't be as the rar is an ship.exe extraction with a change,bat and the xda3nbtool in it. The files have been modified with T-MOB101, and the rest of what I said in post 1 is still true
I downloaded it again 10 mins ago (XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00)
If I upload this as an original and somebody that has o2 asia CHT will try to flash it with the wrong operator code,
-> then he will post "I get opcode error on upgrade"
-> we will say "try an original ship.exe"
-> he will say "I am"
and... Well we will say "Sorry about that wiki is not what it once was".
What we neeed is the Untouched ship.exe the one with the 02_ASIA code in it, else I a call it a baked rom.
MDAIIIUser said:
Hi mwang
Its an orginal ship.exe, I reload last night
Click to expand...
Click to collapse
It can't be as the rar is an ship.exe extraction with a change,bat and the xda3nbtool in it. The files have been modified with T-MOB101, and the rest of what I said in post 1 is still true
I downloaded it again 10 mins ago (XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00)
If I upload this as an original and somebody that has o2 asia CHT will try to flash it with the wrong operator code,
-> then he will post "I get opcode error on upgrade"
-> we will say "try an original ship.exe"
-> he will say "I am"
and... Well we will say "Sorry about that wiki is not what it once was".
What we neeed is the Untouched ship.exe the one with the 02_ASIA code in it, else I a call it a baked rom.
Click to expand...
Click to collapse
I got this ROM from Wiki see " Can't reboot after upgrade to XDA IIs Chinese" , work fine for me , I reload Dopod 13106_118_10600 ship Rom and extended ROM that's original.
Well thats the end of that story, i will post it as baked, thanks mwang, you are our cht man. (was there not a song about that?)
Sche sche
I am not only CHT man ,tell you the true I am Chinese from Taiwan,I email to Dopod/Taiwan ask them have any new ROM come out,they said maybe next month,if I gtet new ROM will post here.
Hi All,
Just had a new M2000 delivered form Orange (UK) today which to my suprise had the 1.40 ROM on it. I also have an M2000 from Orange which has the 1.31 ROM on it - but I can't find anything on the Orange website to upgrade this phone?
I've taken a dump of the ROM using the grab_it.zip from the Tech-Ed 2005 thread - is this of any use to anyone and/or anyone have any ideas if the Orange 1.40 ROM is available for official download yet?
Cheers!
Chris
Orange 1.40 Rom
Please please please!!!
I did the update to Imate 1.40 which worked great but was unable to restore all my backed up docs and utils.
Ended up downgrading to original Orange Rom...
Cheers
Russ
forza said:
Hi All,
Just had a new M2000 delivered form Orange (UK) today which to my suprise had the 1.40 ROM on it. I also have an M2000 from Orange which has the 1.31 ROM on it - but I can't find anything on the Orange website to upgrade this phone?
I've taken a dump of the ROM using the grab_it.zip from the Tech-Ed 2005 thread - is this of any use to anyone and/or anyone have any ideas if the Orange 1.40 ROM is available for official download yet?
Cheers!
Chris
Click to expand...
Click to collapse
Can you please upload it onto the FTP?
Umm - can't get the upload on FTP to work (keep getting permission denied) - you can grab it from here temporarily;
<snip>See post below, these files are now on the FTP server</snip>
forza said:
I can't find anything on the Orange website to upgrade this phone?
Click to expand...
Click to collapse
Another great bit of tech support from Orange then
OK - found all the relevant wiki articles and have now done the following;
Uploaded the ROM dump to FTP (in the Blueangel folder, OrangeUK_1.40_ROMDump_040805.rar)
Used the instructions on en.PDAMobiz.com (http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151&PN=1) to dump the ROM to an SD card, and then used that SD card to update my phone - this is also uploaded to FTP (OrangeUK_M2000_140_ROM.rar) - you'll need a 512mb SD card as that's all I had handy this morning.
My phone has successfully updated from 1.31 to 1.40 although the Radio version hasn't changed (both the new M2000 and mine show 1.06.02). The CE ROM shows as 1.40.00 WWE when the device is reset.
Hope this helps someone
Please upload the ext rom and maybe post the config.txt in clear text.
Ta
MDAIIIUser said:
Please upload the ext rom and maybe post the config.txt in clear text.
Ta
Click to expand...
Click to collapse
Done, again in the Blueangel folder, called OrangeUK_Extended_ROM_1.40.179_WWE.rar.
This is the version information shown in Settings/Device Information;
Operator Version: 5.40.1.179
ROM Version: 1.40.00 WWE
ROM Date: 03/10/05
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtROM Version: 1.40.179 WWE
Config.txt;
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\BA_Version_140.sa.CAB
CAB: \Extended_ROM\Album_BlueAngelAKU26_Generic_WWE_RC20.CAB
CAB: \Extended_ROM\Caller_ID_BA26_Generic_WWE_RC21.CAB
CAB: \Extended_ROM\MIDI_RTPI_BA26_RC20.CAB
CAB: \Extended_ROM\BA_OEM_PA_WModem.sa.CAB
CAB: \Extended_ROM\BA_OEM_PA_Remove_WiFi_Logo_WWE.sa.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_0903.CAB
CAB: \Extended_ROM\ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
CAB: \Extended_ROM\Java_V10.1.2.49_BA_WWE_0901_unremovable.CAB
CAB: \Extended_ROM\OrangeUK_Del_Start.sa.CAB
CAB: \Extended_ROM\OrangeUK_ActionE_Connection_010705.CAB
CAB: \Extended_ROM\OrangeUK_PIEhome_favorite.CAB
CAB: \Extended_ROM\OrangeUK_PIEhome_favorite_patch.CAB
CAB: \Extended_ROM\OrangeUK_Customization_0903.CAB
CAB: \Extended_ROM\OrangeUK_Help_102804.sa.CAB
CAB: \Extended_ROM\OrangeUK_Add_Programs.sa.CAB
CAB: \Extended_ROM\Orange_GPRS_Desconnect.sa.CAB
CAB: \Extended_ROM\Orange_New_Today.sa.CAB
CAB: \Extended_ROM\OrangeUK_UserAgent_Button.sa.CAB
CAB: \Extended_ROM\PVPlayer_Eng_AAC.2577.CAB
CAB: \Extended_ROM\THB_Carkit_0408.CAB
CAB: \Extended_ROM\CameraWizard_BlueAngelAKU26_Orange_RC21_Customize.CAB
CAB: \Extended_ROM\Default_BA_Camera_Driver_Patch.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Struggling with SD card ROM restore
Hi,
Downloaded the ROM, and restored to my 512 SD card with ntrw, but the bootloader does not appear to restore from the SD card. Orange M2000 with bootloader 2.07. The display just says Serial (or USB if I put it in the cradle) in bootloader mode.
Any ideas?
D:\kits\ppc\www.orange.co.uk\OrangeUK_M2000_140_ROM>ntrw write M2000_140.nb1 N:
NTRW v2.00
Removeable media
Cylinders: 0:61
TracksPerCylinder: 255
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
512229376 bytes written
Will somebody please post ms version and build number of this 1.40 rom?
Is it me or is the OrangeUK_Extended_ROM_1.40.179_WWE.rar ROM missing from the FTP site? I've serched all the folders but can't see it!!
Wiki updated with this EXT Rom files can also be found in the kitchen
ftp://xda:[email protected]/Orange_UK_SPVM2000_Ext_ROM_140179_WWE.rar
Edit: Corrected link and text
Thanks mate, i knew it was there somewhere!!
By the way, how can install the dump.bin or M2000_140.nb1 files to my SPV? I've followed the link but when i enter the bootloader mode nothing happens, and its apparently meant to ask me if i want to restore from SD card? Help!
Hi,
I followed the instruction, restore the 512mb SD card dung ntrw.
However, when I put the SD card in the PDA and enter bootloader, it only says:
SD Download
=========
Sections = 3
Not allow
update!
What does it mean?
i try out the cam cabs i think i mutch better now !! what did you think ??? :?:
I have the same problem as woodrjh, when I enter bootloader it says serial and thats it, am I missing something?
I have an Orange SPVM2000, and the bootloader is version 2.07
Thanks
Nice alot of Orangers here...
1) is it tri band or Quad Band
2) was anyone Successful to update the m2000 with the imate rom?
I think it's tri band, all I want to do is improve the quality on my bluetooth headset, it is really bad, I keep hoping for a solution and this maybe it :?
I have an Orange SPV M2000
Rom Version 1.31.00 WWE
Rom Date 12/13/04
Radio version 1.12.00
Ext ROM V 1.31.162 WWE
This ROM contains some new updates:
CAB: \Extended_ROM\BA_OEM_PA_WModem.sa.CAB updates wmodem.exe to version 2.1.5.0, original version was 2.1.3.0
CAB: \Extended_ROM\THB_Carkit_0408.CAB - updates wavedev.dll to 1.41f.00. Old version was 1.40.00
I have the impression that the T-Moble ExtROM does much more than is needed to get a smoth operating device.
Also, from their filenames, I have the impression that some customisations are in fact patches to programs in the OS ROm 1.6.2.2
I flashed my Wizard with the Qtek 1.6.7.1 WWE ROM (I hate it when computers start talking in dutch), but would like to get the needed T-Mobile things.
Off course I backed up my ExtROM.
This is the from the T-Mobile 1.6.2.103 ExtROM config.txt.
SHOW:\Extended_ROM\TMO_WallPaper.bmp -> Shows wallpaper during customisation. Not Needed.
EXEC:\Extended_ROM\cusTSK.exe \Windows\T-Mobile.tsk -> Installs T-Mobile (pink!) theme. Not needed
CAB: \Extended_ROM\Signed_UNI_TMONL_Conn_112101.CAB -> Guess its the connection settings for T-Mobile NL. Needed for T-Moble NL users.
CAB: \Extended_ROM\UNI_BrowserPerformance.sa.CAB
CAB: \Extended_ROM\Signed_DiscoButton8.sa.CAB -> Gues its the buttonbar on Today. Not handy imho so not needed.
CAB: \Extended_ROM\Signed_Wiz_NoGPRSAutoattach.sa.CAB
CAB: \Extended_ROM\Signed_TMO_EU_UA_051003.sa.CAB
CAB: \Extended_ROM\Signed_UNI_TMONL_Set_111101.CAB
CAB: \Extended_ROM\CAB-Customization-WapPush-TMO-Wizard-Aug11.CAB
CAB: \Extended_ROM\Signed_Wiz_TMO_STK.sa.CAB -> Guess its the SIM Toolkit. Needed imho.
CAB: \Extended_ROM\VMail.CAB -> I gues this one sets the VoiceMail number under speed-dial 1. Just needed for T-mobile NL users.
CAB: \Extended_ROM\Signed_BeepMode_Longtones.sa.CAB
CAB: \Extended_ROM\Signed_TMO_CameraDriverPatch.sa.CAB -> No idea. Camera version on QTek is 3.00 (build 21954). Check with MDA vario version/build to determine if its needed. Anyone?
CAB: \Extended_ROM\Signed_TMO_DisableLoadSIMdata.sa.CAB
CAB: \Extended_ROM\Signed_TMO_OutgoingSpeech.sa.CAB
CAB: \Extended_ROM\Signed_CameraPatch_OV9650.sa.CAB -> No idea. Camera version on QTek is 3.00 (build 21954). Check with MDA vario version/build to determine if its needed. Anyone?
CAB: \Extended_ROM\Signed_Version.sa.CAB -> Guess this is the setting of ExtROM version. Every ExtROM should have its own, so not needed.
CAB: \Extended_ROM\CAB-Customization-TMNL-Wizard-01-05-07Nov05XML.CAB
CAB: \Extended_ROM\CAB-DATEamil-Wizard-TMONL-24Ju105-DataBase.CAB -> Guess this is the email wizard. Not needed.
CAB: \Extended_ROM\Shorcut-MMS1-JAVA6XX-CV-VOICE-EmailWiz-TMO-03Nov05.CAB -> Creates a lot of shortcuts (in dutch!) in menus. Not Needed.
CAB: \Extended_ROM\PictureVideo_reg_signed.CAB
CAB: \Extended_ROM\Ringtone_NLD_0811_signed.CAB
CAB: \Extended_ROM\TMO_NL_Browser_Signed.CAB
CAB: \Extended_ROM\SmartDialing_enable_0915_signed.CAB -> Enables Smartdialing, skinning (pink) is not in here but in OS ROM I think. Better use QTek (blue) one so this one Not Needed.
CAB: \Extended_ROM\TMO_NL_pIEDefaultPage_Signed.CAB -> Sets homespage of pie to pda.t-mobile.nl. Not needed but very handy for dutch speaking users
CAB: \Extended_ROM\TMO_NL_UXC_Signed.CAB
EXEC:\Extended_ROM\WifiTempON.exe
CAB: \Extended_ROM\Signed_WifiSSID.sa.cab
EXEC:\Extended_ROM\WifiTempOFF.exe
For each line i would like to :
- Know what does the cab
- Have an 'Is it needed advice'
Once this list gets better I will publish it on the Wiki pages (like in to good old Himalaya days)
Anyone?
many questions are answered here:
http://gathering.tweakers.net/forum/list_messages/1103676/0
It includes EXT. ROM and comments what each file does, but I notice you have found some out already.
Thanks for the tip.
I used all i could get from that page.
I think my list For following ROMs is now complete:
1.6.2.103 NLD (T-Mobile)
1.6.7.101 WWE (Qtek)
See the WiKi:
http://wiki.xda-developers.com/index.php?pagename=Extended ROMs explained
lol kenjij, was just going to post the list from there
OK, so I finally got curious enough to cook my own ROM then added it to Ell82's AKU3.2 ROM and stumbled across something pretty cool...I followed Faria's instructions (turns out not very well...) and added a cab with spaces (I know, I know, freakin noob...). Anyway, it apparently just skipped over that cab and kept going. Now here's the cool part, the total cabs I added to my ROM was only 2.6 MB so I thought I was OK. Didn't pay close enough attention until later and realized the nk.nbf file was about 10.5 MB. When faria says the Ext Rom shoudl be less than 9.5 MB, is he talking the total of all the cabs, or the nk.nbf file???
Bottom line is even though the nk.nbf file was 10.5 MB it installed and ran fine on AKU3.2 (except for the cab with spaces). I then tried to load this into Molski's 2.26 ROM and the ExtROM wouldn't take. Went back and fixed the cabs with spaces and it still won't take.
This leads me to the initial conclusion that the AKU3.2 ROM allows you to exceed the 9.5MB limit. Can anyone else confirm this?
total n00b for sure... (not flaming)
when you make an extended rom it defaults to a size of around 10meg, no matter whats in there.. you could have 1 [email protected] 10k or 500 [email protected] 10.5meg (just cant go over the 10 meg limit).. so if you have 1 cab then no matter what the size is automatically 10meg.. everything in the rom is addressed my memory locations, everything has a set start and end address
and you can prevent cabs from being installed by removing them from the config.txt
OK, then help a ROM-cooking n00b out. Faria's tutorial mentions the instructions were tested up to the 2.24 ROMs--anything that would cause a problem with his ext-rom-base on a 2.26 ROM? I just can't get it to install. The ExtROM is not corrupt because I can manually install each cab in the ExtROM using total commander, but can't get them to install from hard-reset...
jorge_culv said:
OK, then help a ROM-cooking n00b out. Faria's tutorial mentions the instructions were tested up to the 2.24 ROMs--anything that would cause a problem with his ext-rom-base on a 2.26 ROM? I just can't get it to install. The ExtROM is not corrupt because I can manually install each cab in the ExtROM using total commander, but can't get them to install from hard-reset...
Click to expand...
Click to collapse
well actually the ext rom could be corrupt.. i have had that problem before(actually with my latest UWC beta, which caused almost a week long delay).. all cabs would install manually but the ones listed in the config.txt wouldnt install at all... what cabs are you trying to install that arent? and what does the contents of your config.txt look like?
Thanks for the help ShogunMark--is it possible for an ExtRom to install fine for AKU3.2, then same extact ExtROM (no rebuild, no changes, didn't even look at it funny!) not install on 2.26 (installed it twice on 2.26 in case it might have been corrupt the first time)? That's the situation I'm looking at. Originally the extROM (the one that worked for AKU3.2 but not on 2.26) had a few cabs with spaces in their names. When I started having problems on 2.26 I started looking closer and rebuilt the ExtROM with new file names, but it still wouldn't install on 2.26. Just to make sure I'm not crazy, I'm about to down-grade to AKU2.3 OS version 2.24 to fully comply with the ROM building tutorial that says its tested to at least OS version 2.25. I'll let you know how that goes in a few hours. In the meantime, here's the Config.txt I'm using now that won't go in auto, but allows me to install the cabs by hand in 2.26:
LOCK:Enabled
CAB: \Extended_ROM\cLaunch.arm.CAB
CAB: \Extended_ROM\Molski.Biz_VoiceDial_Button_Customizer.cab
CAB: \Extended_ROM\Molski.Biz_Customizing_Tweaks.cab
CAB: \Extended_ROM\Molski.Biz_Performance_Registry_Tweaks.cab
CAB: \Extended_ROM\nullkb.ARM4.CAB
CAB: \Extended_ROM\rar360.ppc_arm.cab
CAB: \Extended_ROM\SmartDial+EtenSkinPortretD_v2.cab
CAB: \Extended_ROM\fileaslf.arm.cab
LOCKisabled
RST: Reset
jorge_culv said:
Thanks for the help ShogunMark--is it possible for an ExtRom to install fine for AKU3.2, then same extact ExtROM (no rebuild, no changes, didn't even look at it funny!) not install on 2.26 (installed it twice on 2.26 in case it might have been corrupt the first time)? That's the situation I'm looking at. Originally the extROM (the one that worked for AKU3.2 but not on 2.26) had a few cabs with spaces in their names. When I started having problems on 2.26 I started looking closer and rebuilt the ExtROM with new file names, but it still wouldn't install on 2.26. Just to make sure I'm not crazy, I'm about to down-grade to AKU2.3 OS version 2.24 to fully comply with the ROM building tutorial that says its tested to at least OS version 2.25. I'll let you know how that goes in a few hours. In the meantime, here's the Config.txt I'm using now that won't go in auto, but allows me to install the cabs by hand in 2.26:
LOCK:Enabled
CAB: \Extended_ROM\cLaunch.arm.CAB
CAB: \Extended_ROM\Molski.Biz_VoiceDial_Button_Customizer.cab
CAB: \Extended_ROM\Molski.Biz_Customizing_Tweaks.cab
CAB: \Extended_ROM\Molski.Biz_Performance_Registry_Tweaks.cab
CAB: \Extended_ROM\nullkb.ARM4.CAB
CAB: \Extended_ROM\rar360.ppc_arm.cab
CAB: \Extended_ROM\SmartDial+EtenSkinPortretD_v2.cab
CAB: \Extended_ROM\fileaslf.arm.cab
LOCKisabled
RST: Reset
Click to expand...
Click to collapse
the problem is that you are missing the disable security cab, i have attached in case you need it.. I would also bet those spaces arent suppose to be there... you should have this:
LOCK:Enabled
CAB: \Extended_ROM\Default_Signed_DisableSecurity.CAB
CAB: \Extended_ROM\cLaunch.arm.CAB
CAB: \Extended_ROM\Molski.Biz_VoiceDial_Button_Customizer.cab
CAB: \Extended_ROM\Molski.Biz_Customizing_Tweaks.cab
CAB: \Extended_ROM\Molski.Biz_Performance_Registry_Tweaks.cab
CAB: \Extended_ROM\nullkb.ARM4.CAB
CAB: \Extended_ROM\rar360.ppc_arm.cab
CAB: \Extended_ROM\SmartDial+EtenSkinPortretD_v2.cab
CAB: \Extended_ROM\fileaslf.arm.cab
LOCKisabled
RST: Reset
Ahh, so even though one of Molski's cabs does this, I need to disable security first to allow the other cabs to install? I think I get it! Thanks again,
Geo
jorge_culv said:
Ahh, so even though one of Molski's cabs does this, I need to disable security first to allow the other cabs to install? I think I get it! Thanks again,
Geo
Click to expand...
Click to collapse
yes, you need that or the other cabs wont install, most importantly it needs to be first, or else anything else that isnt signed wont install