Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one
and you're still waiting to publish it !!
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.
Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here
Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS
mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...
from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.
It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"
I need the password for this ROM... :roll:
Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???
I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here
off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available
freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?
Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.
Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)
As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.
i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.
ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks
can someone explain to me where I can upgrade my spv m500 with rom 1.11?
joepie said:
can someone explain to me where I can upgrade my spv m500 with rom 1.11?
Click to expand...
Click to collapse
also konw as qtek s100 :arrow:
Check this thread:
http://forum.xda-developers.com/viewtopic.php?t=19676
Be aware that this Qtek ROM is ´clean´. There are no provider specific settings. Thus, you have to configure the Orange settings (GPRS, MMS, etc.) manually after the upgrade.
O BTW, you posted in the wrong topic!
Hi,
Did anyone tried upgrading a Qtek with club i-mate new roms?
Do we need a "NoID" file?
michar said:
Hi,
Did anyone tried upgrading a Qtek with club i-mate new roms?
Do we need a "NoID" file?
Click to expand...
Click to collapse
I am wondering about it too. BT on imate version is much stronger than QTEK
What are differences between I-mate and Qtek ROMs in part of BT functionality. Does voice dialer via BT headset on Imate ROM starts when device is off?
ID64 said:
I am wondering about it too. BT on imate version is much stronger than QTEK
Click to expand...
Click to collapse
how to reset imate k jam
Hi,
I tried searching for this but could not find it.
Can a T-Mobile USA MDA be upgraded with a QTEK ROM??? I have a friend who wants to upgrade his ROM on the MDA to QTEK 9100 ROM, dont know why??!!
Please let me know whats the latest English ROM and where can I get it?
Thanks and regards
Yes, it can be done... That is what a lot of these forums are all about.
Your friend probably wants to get rid of all those T-Mobile software customization. A lot of people do, anyway.
Thanks for the reply.
Whats the latest QTEK ROM that I can download for him and install?
cheers
Search the XDA FTP Server for the latest Roms of all brands, the latest Rom are the T-Mobile 2.24 and Cingular 2.25 (if I am right!)/
Thanks for the reply.
I searched the FTP site, what about the FRA, GER...etc are these French German...etc.? If I need just the English version do I download the WWE??? is that worldwide edition??
Thanks in advance
Mehdi
hi!
I new here, Im Brazilian from SP and my English is very ugly!!
I have a Qtek A9100 with a PT-BR WM5, but I like change to a English WM5.
which is the rom for this device?
A9100 is same Wizard 100
ROM version: 2.22.17.1 PTB
Date: 23/03/06
Model: WIZA100
thanks a lot!
demo.ckp said:
hi!
I new here, Im Brazilian from SP and my English is very ugly!!
I have a Qtek A9100 with a PT-BR WM5, but I like change to a English WM5.
which is the rom for this device?
A9100 is same Wizard 100
ROM version: 2.22.17.1 PTB
Date: 23/03/06
Model: WIZA100
thanks a lot!
Click to expand...
Click to collapse
As Qtek A9100 is a wizard all wizard wm6 rom are good for this device,if you have any experience in unlocking and upgrading than it's good,otherwise this forum wud be a good place to read and learn how to unlock and upgrade,you'll find all your answers here ,however to choose a rom,this link might help:-
http://forum.xda-developers.com/forumdisplay.php?f=356
good luck
zabardast_1 said:
As Qtek A9100 is a wizard all wizard wm6 rom are good for this device,if you have any experience in unlocking and upgrading than it's good,otherwise this forum wud be a good place to read and learn how to unlock and upgrade,you'll find all your answers here ,however to choose a rom,this link might help:-
http://forum.xda-developers.com/forumdisplay.php?f=356
good luck
Click to expand...
Click to collapse
Im reading any topics about flash rom, this forum have a lot of information.
I choose two rom to try: t-mobile and faria wm6
today I try the first flash
thanks
I change my rom to WM6 Faria Crossbow using two guides write here!!
Same Problem
Hi, I have the exactly problem
My Qtek 9100 is a G4, do you got upgrade your rom, can you help me with your receipt?
I want to upgrade for WM6.
Can you help me.
Best regards
Carlos Arruda said:
Hi, I have the exactly problem
My Qtek 9100 is a G4, do you got upgrade your rom, can you help me with your receipt?
I want to upgrade for WM6.
Can you help me.
Best regards
Click to expand...
Click to collapse
G4 device cannot be unlocked and upgraded like a G3 device,so never ever try to CID unlock the your phone using G3 methods,you'll certainly 'BRICK' your phone.
To upgrade a G4 device,there's another method,read and undrstand it before performing any upgrade,check this link for G4 upgrading method,good luck
http://forum.xda-developers.com/showthread.php?t=329147
Hello,
Please, how can I tell whether my Qtek A9100 is a G3 or G4?
thanks