Related
Hi. I have some questions (maybe someone did it)
1.) How to put some registry settings into .cab (some desktop tool?)
2.) How to backup settings data (gprs,mms, etc) are they in registry?
3.) Anyone knows how to make my Wizard to use localized MUI files ( nls and MUI reg hack localize only Voice Dial)
4.) how to run outlook with as "new sms" - i need it for shortcut
5.) I have found screen settings with 16 bpp (default) i switched it to 32 and i'm not sure sth happend. Maybe it was a bit slower. Anyone knows does it affect to screen and what is max value (64??)?
Lost my reply thanks to ctrl+C not working for some reason. Let's try again.
savac said:
1.) How to put some registry settings into .cab (some desktop tool?)
Click to expand...
Click to collapse
You can use any CAB editor. I was recommended OCP Software's WinCE CAB Manager - it works great.
savac said:
2.) How to backup settings data (gprs,mms, etc) are they in registry?
Click to expand...
Click to collapse
Yes. Your best bet will be to open up an existing operator settings CAB and adjust the values to what you're using, and then save the CAB again. This way you can just install that CAB anytime you need to re-set those settings. Search the forum for some example operator settings CAB files.
savac said:
4.) how to run outlook with as "new sms" - i need it for shortcut
Click to expand...
Click to collapse
No idea. Although you can make a shortcut with...
32#"tmail.exe" -service "Inbox" -to ""
to create a new message, it will default to whatever is your currently active inbox. So if Hotmail was your last active inbox, you'll be composing a new Hotmail message.
32#"tmail.exe" -new
Will pop up an Account selector to let you pick where to start a new message in.
I'm sure there's an option to pick the account on the command line as well, but I haven't found it %)
You can always use VJSMS from vijay555's VJPhoneTools:
http://www.vijay555.com/index.php?Releases:VJPhoneTools
It's just a small app, and you can launch it with shortcuts as well.
savac said:
5.) I have found screen settings with 16 bpp (default) i switched it to 32 and i'm not sure sth happend. Maybe it was a bit slower. Anyone knows does it affect to screen and what is max value (64??)?
Click to expand...
Click to collapse
Max is probably 32bpp - however, your screen is, at maximum, likely to be 18bpp. And addressing at 18bpp just makes things slow. See also:
http://blogs.msdn.com/windowsmobile/archive/2005/09/07/462187.aspx
'fraid I have nothing on point #3
ZeBoxx, you again?!
Regarding starting new appointments etc, have a look here:
http://forum.xda-developers.com/viewtopic.php?p=204692#204692
basically:
Append -new to each of the PIM tasks, eg
Start the apps as such:
\windows\addrbook.exe -new
\windows\calendar.exe -new
\windows\tasks.exe -new
Click to expand...
Click to collapse
To start a new message, there may be other ways, I'm sure there are, but you can use my VJSMS with "" on the end eg
"....\VJSMS.exe" ""
Click to expand...
Click to collapse
V
vijay: of course me again
And yeah, like I said, you can use "tmail.exe -new" to start a new message. However, it will ask you what account you want to send from.
You can skip that bit with the earlier shortcut - but it will default to whatever your current/last active Account was.
So basically, say my current/last active Account is hotmail... then what shortcut do I need to start a new SMS (which is in the "Text Messages" Account) ?
I haven't spotted a way, tried a couple of strings - no luck. Your app would surely work, but I can't help but think there's gotta be a way to do it with just tmail.exe
is there a way to turn off the beep when you hit "send" after dialing a number?
Lavachild said:
is there a way to turn off the beep when you hit "send" after dialing a number?
Click to expand...
Click to collapse
You need to install a program that can edit registry and do the following change:
Look up HKEY_CURRENT_USER\ControlPanel\SoundCategories\CallStart
Change the InitVol value to 0
Thanks a lot for that bit of info... The beeping was beginning to annoy me aswell
brilliant,thank you!
Amateur question. Where can I find a reg edit program?
Lurchy24 said:
Amateur question. Where can I find a reg edit program?
Click to expand...
Click to collapse
This is free:
http://www.phm.lu/Products/Smartphone/RegEdit/
Guess you have to choose the ARM version at the top in the drop down list.
Didn't get the desktop installer to work.
Copy the .cab over to your device and run it from there.
Well... why not just put it here.
Thanks.....
i downloaded the free trial of resco and that works great. i liked it so much i will buy it for sure. www.resco.net
After changing the value to "0" and pressing done, I exit the program and no longer have the beep when dialing. Once I shut down the phone and reboot, the beep starts up again. Is there a way to make it permanent?
It happened me too, permanent solution - I rewrited file callstart.wav in Windows folder in Audacity program and I used function - silence. It means now when I call my handy play only silence on call start
Lurchy24 said:
After changing the value to "0" and pressing done, I exit the program and no longer have the beep when dialing. Once I shut down the phone and reboot, the beep starts up again. Is there a way to make it permanent?
Click to expand...
Click to collapse
There is. 1. Use Total Commander (freeware) and copy the file Silent.prof.xml from the folder Application data\Profiles to the folder \Application data.
2. Then rename the copied file name to Normal.prof.xml (or Meeting.prof.xml, if wished, this is the buzzing profile).
3. Then move the new Normal.prof.xml (pr Meeting.prof.xml) back to the folder Application data\Profiles and overwrite old file.
4. After this you'll to have to reconfigure your settings in the normal (and meeting) profile but the beep at call start won't return even if device is restarted.
Got this solution from another S730 forum. Seems the Silent.prof.xml file is the only one in which the beep at call start is disabled.
it's quite a lot easier editing your profile xml file. change the value 'CallStart' to '0' and you're done.
Hey Admins,
perhaps you can make a sticky "Tweaks for HTC Wings" including this tweak.
Bye
shadow2000 said:
Hey Admins,
perhaps you can make a sticky "Tweaks for HTC Wings" including this tweak.
Bye
Click to expand...
Click to collapse
I second the proposal.
can anyone tell me how to get rid of this on a kaiser? its driving me nuts! ive checked everywehre
ksga said:
it's quite a lot easier editing your profile xml file. change the value 'CallStart' to '0' and you're done.
Click to expand...
Click to collapse
I tried this to do with the built-in editor of total commander and I even tried downloading and uploading the file.
I haven't had any success. I changed the value to "0" and then I wasn't able to select that profile any more.
I had to start over with "use defaults", then I was able to select and configure that profile again.
What have I done wrong?
I was having the Same issue over here.
Now I solved it thanks to Radiax!
The solution is simple, change your profile again like you did last time, but after saving the file you have to navigate to Properties (File -> 0 More -> 4 Properties) and change the System value to +. Make sure to use the latest version (V2.5, released 24th of April) because this function doesn't work in previous versions.
Hope this'll work for you just like it did for me.
thats it!
Its necessary to set the system-bit!
Many thanks!
JunkieXP said:
I was having the Same issue over here.
Now I solved it thanks to Radiax!
The solution is simple, change your profile again like you did last time, but after saving the file you have to navigate to Properties (File -> 0 More -> 4 Properties) and change the System value to +. Make sure to use the latest version (V2.5, released 24th of April) because this function doesn't work in previous versions.
Hope this'll work for you just like it did for me.
Click to expand...
Click to collapse
Nice! This indeed works a lot easier than the steps I mentioned earlier in this thread.
Latest Total CMD + System bit set
Hi all,
I tried to set my Wings like described above, but I cann´t use the profile anymore after changing something.
I´m doing this with TC 2.5 and the system bit is set.
Any ideas?
edit: in addition - i don´t have a folder profiles in appdata, the xml´s are in windows folder on my wings
hi there,
is it possible to turn off this annoying notification? Instead of clicking dismiss each time?
and the other question, can you suggest the best way to edit the registry of the device?thx
ps.i just bought tilt for myself, previously i used an 8125
There's a sticky thread with KaiserTweak. Download it, it has MANY tweaks like the one you're talking about. It will fix a lot of annoyances.
yes, it's possible.
use kaiser tweaks or schaps advanced config programs.
1. using a Registry Editor (I use Resco File Explorer), navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
2. Next, click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
3. Name the New Key as "Settings"
4. Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
5. On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
6. Soft reset your device and test it with one SMS
Cheers
Rowan
many many thanks! this is a great forum
the last question - is there any step-by-step instruction how to install this "cube-thing" like there http://youtube.com/watch?v=zyBHL56nDdQ ?Do i need to install cube app and then the touchflo? is there a free touchflo?
i found this http://forum.xda-developers.com/showthread.php?t=369184
and those 2 threads inside but it is not step by step and maybe i did smthg wrong because it does not work...
sorry for offtopic, but i don't want to post another thread
kaluzu said:
yes, it's possible.
use kaiser tweaks or schaps advanced config programs.
Click to expand...
Click to collapse
good call.
Rabangus said:
1. using a Registry Editor (I use Resco File Explorer), navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
2. Next, click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
3. Name the New Key as "Settings"
4. Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
5. On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
6. Soft reset your device and test it with one SMS
Click to expand...
Click to collapse
For what it's worth, my AT&T Tilt already had that string value in it, and I changed the value data from 0 to 1 and it works great. Thanks!
can anyone give me a link to a good registry editor that i can actually edit registry's..... thanx i really need one for tweaks
Please use the search button, that's what it's for.
I use PHM Registry Editor.
I use CeRegEditor.
http://ceregeditor.mdsoft.pl/
I would recommend CE Reg editor.
Hi, I got confused
I installed the CeRegistry. However when i try this tweak:
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0" ( Wake Up on New SMS).
It says 'Access denied' and 'You can not change the value data'.
But if i try this tweak:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1 (Enable GPS photo )
It works.
Mine is o2 xda Diamond.
I just wonder if i am restricted for special part of the reg that i can modify. If so how can i unlock this restriction?
There's an option in CERegEdit to unlock. There is in the one I use anyway...
TheBrit said:
There's an option in CERegEdit to unlock. There is in the one I use anyway...
Click to expand...
Click to collapse
I tried that already in under 'Tool'
It says that the reg is unlocked.
However when i try to modify the value, i still got the same error msg:
'Access denied'.
That's where i got confused
Read http://wiki.xda-developers.com/index.php?pagename=Registry editors & other, related stuff
Is there a way to turn off auto keyboard in the registry??
As in, if you click on a field the keyboard does not automatically show?
You'd have to click on the keyboard icon to show.
I find it a bit annoying especially when using MSN Messenger and it keeps popping up and down when changing from contact list to convo.
HKEY_CURRENT_USER\ControlPanel\Sip>:
Create or change DWORD TurnOffAutoDeploy from 0 to 1
Or download & install this cab:
http://4pda.ru/forum/attach/1836803/SIPUpDisable.cab
OR how about this
Use the Gsensor to activate the SIP?
IT would be great to just tilt the diamond forward and have the keyboard pop up then tilt forward past 90 degrees to hide it again
I will post this in the Gsen thread, maybe the dev's can work something out.
Jules
sounds great
How to uninstall the SIPUpDisable.cab
kortez, I used the cab file and on my HTC Touch Diamond and now I have a strange behavior when trying to write a new SMS!
How can I uninstall the cab file?
Thanks,
Andre
i looked for that registry entry but inside the folder SIP i can't find anything like TurnOffAutoDeploy.
what now ?
iliescu902 said:
i looked for that registry entry but inside the folder SIP i can't find anything like TurnOffAutoDeploy.
what now ?
Click to expand...
Click to collapse
how about creating it?
iliescu902 said:
i looked for that registry entry but inside the folder SIP i can't find anything like TurnOffAutoDeploy. what now ?
Click to expand...
Click to collapse
Run Registry editor, then go to HKEY_CURRENT_USER\ControlPanel\Sip, press New, then choose DWORD Value and write Name : TurnOffAutoDeploy and change DWORD Data : from 0 to 1 with
ktsak said:
Run Registry editor, then go to HKEY_CURRENT_USER\ControlPanel\Sip, press New, then choose DWORD Value and write Name : TurnOffAutoDeploy and change DWORD Data : from 0 to 1 with
Click to expand...
Click to collapse
i'm using registry editor but besides open/copy path, view, refresh, about and exit i don't have any other options in my menu screen. not even import. i don't know how to create a new registry key
You can alter this setting in Schaps Advanced Config 3.2
iliescu902 said:
i'm using registry editor but besides open/copy path, view, refresh, about and exit i don't have any other options in my menu screen. not even import. i don't know how to create a new registry key
Click to expand...
Click to collapse
You should use a propper registry editor. Resco Registry Editor, PHM or the one in the Task Manager 3.1.
Good luck.
anybody try setting this inside hklm\software\windows\messenger live\ or something like that? still pops up in ms.n messenger and this setting is cooked into the rom i am using.
I can't say good enough things about XDA Developers for archiving these threads. This registry hack worked perfectly on my Imagio. So many answers to questions for specific models just keep working on new models and new versions of Windows Mobile/Phone.
And thanks to Kortez for the original reply!