Hi *,
I have had this problem since a while and never got a solution. I would like to know if there is a software solution to prevent the permanent muting as soon as tomtom or the GPS add-on starts..
GPS on => Mute on
The Mute works perfectly with the phone. BUT not with Tomtom..
Does anyone else experience this muting problem.. I read in this forum some potential solutions but most of them include hardware.. I am pretty sure it is more a software issue.. With destinator this problem does NOT exist..
I forgot to mention that I am using:
MDA I
original T-Mobile professional Carkit
Royaltek RGM 2000 GPS mouse
Tomtom Navigator
No one with the same experience??
Thank you in advance..
Related
Hi all,
I've just changed my old car handsfree with a Parrot CK 3100, that works great with my trinity, -but- tomtom6 (vers. 6.03 with Western Europe maps vers. 6.75) doesn't transfer vocal instructions to my car loudspeakers. According to the handsfree installer the problem is with trinity sw, but I think it could depend on Tomtom sw. Has someone had such problem? Thanks a lot for any answer
Sorry, I was wrong: my Parrot is mod. CK 3000, but problems remain...
I'm having the same problem with almost the same devices (P3600 and CK3100) with TT6.
Parrot is at the latest firmware release available.
I'm not an expert on WM5 but the problem could be somewhere in the audio setting around the handsfree service.
I'm not so sure about this is a real problem for me because having frequent interruptions while listening to the radio or cd is not so good.
However if it exists an option to switch the audio on/off....
Sorry not to be helpful
Unfortunately Parrot co. answered my question stating that only DM6000 model is able to transfer mp3 sounds and stereo ones generally from P3600 to hand free set. If only my installer/vendor said it to me... Anybody has got some solution?
Hello people,
i've been searching but couldn't find a thread about bluetooth carkit probs with diamond.
I have a parrot 3100 and always worked just fine with the wm6.1 device I had (Prophet).
But with diamond it's quite a mess.
When phone rings:
- Parrot rings
- Answers call
- Parrot mutes (? Mute-symbol on parrot)
- Cannot unmute, on phone there is no sound.
- Sometimes parrot disconnects a second or two.
When making call
- Also mute problem
- Other line can't hear me, must talk in phone?
Even buggy, sometimes hangs, just working really annoying, cannot rely on the carkit. Missed several callers today.
But, sometimes it just works...
Anyone recognised this, any fix or workaround? It should be able to work propery.
Also wonder, why my parrot gives the contacts as contact /m for mobile and contact /w for work in normal list, instead of grouping them under one name (contact -> work, mobile etc).
Have you tried firmware upgrade on your Parrot 3100?
http://www.parrot.com/uk/support/downloads
OMG what an Idea.
I'll take this laptop into my car and fix it.
I have the same parrot and I'm having similar issues. It's annoying because when it gets "muted", the parrot is functioning as if had a call and it blocks the music from the cd-player and it won't get unblocked until I turn off my car.
I think I'll try to update the parrot firmware as staroip said...
you can give this software a try.
http://www.jetwaremobile.com/
This has been solved similar problems with my CK3000.
\\yoshi
Version 4.17 of the Parrot software more than solved the issue!!
* good contact syncing
* better voice quality
* no hangs at all
I'm happy
Hi all,
I also have problems with bluetooth and my Audi Bluetooth kit:
Connecting and phoning works fine but:
the phonebook:
- Names are wrong displayed (Surename and name are switched)
- on every number he deleted the "+" ... :-( on the car-screen (MMI)
In the phonebook on the diamond all Numbers have the e.g. +49 ... but on the screen in my car there is no "+" and of course the number without the "+" does not work...
- special chars like ä, ö, .. are not displayed correktly...
So what can I do, and whats that Parrot software you are talking about? EDIT: I just saw the parrot is an external bluetooth kit, right? So no solution with parrot software for my problem
FYI: I had a sony ericsson W950i with Symbian before and there everything worked perfektly with my bluetooth car system, so I hope I can also fix the problems on my Diamond with WM 6.1 ...
Thanks,
MrDiamond.
How did you update your Parrot kit?
Can you do it over bluetooth?
Been using the TD in my Land Rover (Discovery 3) with its bluetooth PTI. Works like a dream.
Auto connects, access to dialled, missed and received calls. Address book navigation using head unit and steering wheel control.
Better than when using my Nokia N95... that never did work with the recent called, dialled, missed lists.
Ironically the LR PTI is made by Nokia
Just need a power charger now as having a bluetooth connection running all the time kills the battery big time.
yerfdog said:
How did you update your Parrot kit?
Can you do it over bluetooth?
Click to expand...
Click to collapse
Yes, look at parrot site. New firmware is available there too.
Version 4.18 an same problems
Riel said:
Version 4.17 of the Parrot software more than solved the issue!!
* good contact syncing
* better voice quality
* no hangs at all
I'm happy
Click to expand...
Click to collapse
I update to version 4.18 of the parrot software, and the same problems are here.
What is your Rom and Radio?.
I have TomTom or CoPilot open and take/make a call via my bluetooth headset. Both programs will then stop talking to me both during and after the call. I have to reset the device to get them to talk again (even restarting the program doesn't work). Sound on the device functions properly. Is there anyone else experiencing this and know of a fix?
Maybe give us your Rom and radio for help.
Sure its garmin's wm6.1 rom (v1.2 I think) with the radio that's 1.58... (I'm at work without my phone (I work in a prison) thus cannot check. But, this was a problem with TomTom on my tilt with the standard att rom before I changed to garmin also.
Thanks,
Alan
I have experienced few irritating problems with my Diamond when used in my Seat Leon 2008's stock head unit via bluetooth:
1. Phonebook is displayed always and I can call phones from there which is OK, however "Incoming Calls", "Outgoing Calls" and "Missed Calls" are not working always: sometimes I have those lists filled with the corresponding entries, sometimes all three lists are empty.
2. When I am running iGO8, the bluetooth connection gets connected and disconnected each 5 minutes or so.
3. The headset volume is really low. I didn't have that problem with my Sony Ericsson phones before.
Does anyone have any of those problems and know a solution for them?
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
try posting in the Accesories section, u might get more help.
marco899 said:
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
Click to expand...
Click to collapse
Pioneer isn't that good either, I had the Pioneer radio with Bluetooth and I couldn't get it running with my previous phone Trinity P3600 and with my Diamond it didn't work either.
Willem
I have used the stock head unit previously with simple mobile phones and it has always worked perfectly and I was very happy with the bluetooth implementation in Seat. So, I think the problem is not in the head unit (i.e. an accessory problem) but lies somewhere in the "phonebook through bluetooth" implementation in the Diamond.
Hello,
I have the same problem. I have a Skoda Octavia II (2007) with built-in bluetooth and a Diamond (ROM 2.03).
I use the iGO8, and it works fine, but the bluetooth connects and disconnects randomly in all ~5 minutes. When I shut down the iGO8 or when it runs on the background, the bluetooth works perfectly, when it runs in the foreground, the bluetooth disconnects again...
Who knows wat is this problem? Should I try a new ROM? A new radio version? A new iGO version?
CyberGene: Have you a solution for this problem? Or you use a different iGO8 or a different navi software?
Thanks,
DuckHead_
Unfortunately I didn't find any solution to the problem. To be honest, I am currently using a SonyEricsson phone and the Diamond is used by my girlfriend. We are still using iGo from within the Diamond but with no Bluetooth activated.
Thank you for the quick answer.
Why don't you just take your car into a car audio place and get them to check it out for you
I thought it so that the problem with Diamond. The BT does not work only if running the iGO...
Hi everybody!
I am really sorry if this was answered somewhere, but I couldn't find solution anywhere on forum.
I have Dutty's latest ROM and HBH-DS220 bt hp.
A2DP works superb. I can take calls but after call si finnished BT disconnect and music resume on internal speaker.
Is there any solution for this???
Tnx for everything you guys and girls doing for community.
I really appreciate that.
Respect.
Hi,
did you solve the issue ?
I'm experiencing the exact same issue suddenly, never had this problem before and now it's hanging after each call.
Really annoying.
BR