Related
I am unable to unlock the extended ROM and read and copy the data contained there but I cannot write to or modify any of the files there.
Is there anyway to unlock the flash for write operations?
Thanks
G
Cabs are read only in ext rom, change the attrib.
The xda tool has an unlock and an unhide. one is to beable to see the ext rom the other to write to it
i gave that a try, it seems that the rom is read only, I am unable to copy additional cabs to the Extended rom.
Is this a Harier device?
XDAIIs BlueAngel
Did you do a softreset after the unlock?
Yip, I also tried the same process after an O2 upgrade rom, same results
If I use the exe lock tool with -unlock I get an error
Well dont think you are using the same tool. Pop of to wiki in the kitchen under kitchen tools. Try that one, its the one I use.
I used this tool
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Tools
The unlock tool on the top of the page
I also did a hard reset and now when I execute the cab I cant even see the Extended Rom now, I was able to see it before, I just couldnt write to it.
I found a smaller rom viewer cab, I can see the extended rom now, but I still can't write to it, it tells me the media is write protected.
Hope you meant soft reset.
Thats the correct tool, you need to unhide, softreset, unlock, softreset
The files are under programms extrom tools
nope, did a hard reset to be sure, ok so I unhide with the cab file reboot, then run the exe with a -unlock and reboot then I should be ok?
I will try again.
ok, I get ERROR: FL_IOCTL_BDTL_HW_PROTECTION - A device attached to the system is not functioning.
any ideas?
Sorry time for me to give up on you. Just to convince myself that I was telling you the correct steps i installed the tool again, softreset, did a unlock (got an write protect error) so softreset again. Thus confirming the fact you need a softreset after both actions.
"then run the exe with a -unlock "
This part a fail to understand on the tool of wiki you end up with an icon, you tap it, "no run the exe with -unlock"
So as you have a BA and not a harrier were we know you need a differwnt tool, and as you are using a tool that we know that works the only 2 conculsions I can come up with are.
1) You have a faulty device
2) you are not using the tool or the steps needed to run the tool in the correct manor.
Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes
Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?
Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!
Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX
Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.
Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/
Hi
one time i run harrir extrom unlock and this will loack my storge mamory and i can not unloack it i download unlock cab but this wasent work
when i want to unloak this message will show :
FL_IOCTL_BDTL_HW_PROTECTION
please help me what shold i do to unlock my storage memory
same problem here with my pda2, i used Pda2k Exended ROM Unlocker and when i used Hide & Lock it locked my Storage!!
my storage is write protceted now!!
:? :?
Hi!
You can trying down load file on this add:
http://www.handheldvn.com/forum/sho...=khuyết
phuong said:
Hi!
You can trying down load file on this add:
http://www.handheldvn.com/forum/sho...=khuyết
Click to expand...
Click to collapse
404 Document Not Found
and now ?
this link dosent work
please set link
Try this link:
http://forum.xda-developers.com/viewtopic.php?p=147439
pug said:
Try this link:
http://forum.xda-developers.com/viewtopic.php?p=147439
Click to expand...
Click to collapse
Perfect!
It works ! I can´t beleve it !
I´ve searched many houres to find a working tool for the 2i but now....
Yessssssss
Thanks My God
It's work
thanks very mutch
It's working! Thanks!!!
RE: Extra Storage
Another method I used.
ftp://xda:[email protected]/Alpine/Extra Storage unlocker
Copy the exe in the zip file to your Alpine, then tap to run on pda. It doesn't show a finished message.
I use 'resco explorer', with show hidden etc in the settings, I haven't tried to vew with only the standard file explorer, it may work as well.
Goto Windows on your pda and you should see a folder called 'shared' it should show 60.9mb free. If you do use Resco Explorer and hold your stylus on the shared folders and select properties, you can change all the attributes (Hidden, Archive, Read, Write and ROM), although I haven't needed to. :lol:
Correct Link for above
ftp://xda:[email protected]/Alpine/Extra Storage unlocker
Hello
I'm be happy that a way seems to be real, but it do not work on my 2020I.
I select unlock Extrom, but the Extrom is no visible, so i select Unhide and it say to me to do soft reset. After it, i don't see any Extrom. Only way is to use original LoadVisk, but it is writeProtected.
Where i am in fault ?
Thank's
QTEK 2020I ROM 1.124 French
I used the Loadvisk on my XDAIIi and I can write to it etc (Shared folder in windows).
Use Resco file explorer to change the shared folder attributes. Make sure you configure Resco to show hidden files etc.
Heres the link
http://www.resco.net/pocketpc/explorer/default.asp
Loadvisk
Here is Loadvisk program I used on XDAIIi, it may help
Confused loadvisk does not access ext rom?????
I'm confused about loadvisk. I thought it unlocked the ext ROM, but no it only gives access to your RAM not to extended rom.
I tried the other tool on here unhide, unlocked, where do I access the rom in my file explorer?
so please ignore my previous posts about loadvisk.
How can I reverse loadvisk to hide the shared folder again?
sorry if this is a bit jumbled, I'm just finding out about this stuff myself
Thank's for reply
But it do not work.
If i use loadvdisk_493.exe, it show Extended_Rom as entry, that is the same result as LoadVdisk.exe that exist in Windows directory. I can't modify files inside Extended_Rom and it as this name, not Shared folder. It is not a folder but new media and with resco 5.22 i can't change attributes because it do not permit to media, only with files or folder.
Secondly, if i use Exttrom_200_250.exe, i can't write to in Extended_Rom.
Is this write for you ??
QTEK 2020i ROM FR
RE: EXT Memory
Hi,
Loadvisk has nothing to do with extended memory, it creates a virtual disk of your Program RAM (see 'Memory' on you PDA). This shows as a folder called 'shared' in Windows, when you copy files to this folder, the look at your memory, you will see that it stores in your program section of your memory and so I wouldn't bother with it.
I have had a good look around and I can find nothing to unlock the true extended memory, only the tool you used to unhide it.
You can flash your extended memory with the 2577 method, but this is not ideal for users who just wnat to access and write to ext memory.
Full details link below
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=373&PN=1
There is another method to write to the extended rom but is far more involved than the method DAz mentioned. It does actually write to the Extended ROM so it therefore survives a hard reset and allows you customise the ROM with programs and remove stuff you don't use like the bloody annoying O2 active crap.
I've used it and can say that with a little patience it is fairly easy to do, although trial and error is required sometimes. Some programs don't seem to install from a hard reset however most do (Pocket Plus, Resco Explorer, TCPMP etc work fine).
Here's the link:
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=373&PN=1
Happy modding.
Ok, Thank's to your comments
QTEK 2020I, ROM FR
Perfect! Exttrom_200_250.exe
It works ! I can´t beleve it !
my XDA IIi storage write protect 3 years
I put quickmenu 2.7 on my card, inserted it in my phone and tried to run it.... it didn't work. The error said that there is no application associated with it. and to run the app first and then open the file from within the app, or something.
So I go back to the computer and unzip the folder to get the quickmenu.exe file then put that on the phone. When I run the exe file I get a error that says "Load qmenubtn.dll failed!"
WHAT IN THE HELL DO I DO!?!?!?!?!?!?!
oh yea, and now i don't know how to delete the quickmenu app either i get another damn error when i start my phone and the loading thing just keeps going like it's looking for one of the .dll files....... HELP PLEASE!!!
diamond_d said:
I put quickmenu 2.7 on my card, inserted it in my phone and tried to run it.... it didn't work. The error said that there is no application associated with it. and to run the app first and then open the file from within the app, or something.
So I go back to the computer and unzip the folder to get the quickmenu.exe file then put that on the phone. When I run the exe file I get a error that says "Load qmenubtn.dll failed!"
WHAT IN THE HELL DO I DO!?!?!?!?!?!?!
oh yea, and now i don't know how to delete the quickmenu app either i get another damn error when i start my phone and the loading thing just keeps going like it's looking for one of the .dll files....... HELP PLEASE!!!
Click to expand...
Click to collapse
Extract the zip in this folder into \Windows on your device, and Run QuickMenu.exe (If you want the English version).
Link: http://forum.xda-developers.com/showthread.php?t=340358
Ta
Dave
thanx
yesssssss!!! thanks a lot man, it looks like it's working much appreciated.
Heres the cab file to make things easier if you need to install it again.
Related question: installing the cab (or unzipping the files and running the exe) doesnt seem to replace the standard start menu. any idea why? i can see the quickmenu.exe and quickmenu.lnk files in \windows, but i can only get quickmenu to pop up by running them.
thanks!
gautamrao said:
Related question: installing the cab (or unzipping the files and running the exe) doesnt seem to replace the standard start menu. any idea why? i can see the quickmenu.exe and quickmenu.lnk files in \windows, but i can only get quickmenu to pop up by running them.
thanks!
Click to expand...
Click to collapse
Click quickmenu.exe while quickmenu is open click Quickmenu>options check for it to replace the standard start menu and to run at startup.
im trying to extract some cabs from a NHB file...can anyone guide me in the direction on how to do this
I'd say the best way to do that is to extract the ROM into regular files.
You need to download a bunch of EXE files: NBHextract.exe, NBSplit.exe, ImgfsToDump.exe, and ImgfsFromNB.exe
You need to extract the NBH with NBHextract.exe. This will yield a .nb file
You need to use NBSplit (use the "-kaiser" parameter) to split the .nb into a .nb.payload file and a .nb.extra file
You then need to use ImgfsFromNB on the .nb.payload file, which will create a file called imgfs.bin
Use ImgfsToDump on imgfs.bin, which will create a folder called "Dump". When it finishes, All of the ROM's files will be there. You will probably want to search the folder for .cab files, since there are thousands of files in the average ROM dump.
That should do the job for you.
Or just use Visual Kitchen to Dump the ROM, and then rebuild the OEMs to CABs.
Dave
could u walk me through the visual kitchen program?
Hmmm look for htcRIE_0.4.0.47 and extract what you want.
im trying to extrct the streaming media player cab...the one thats in most of the 6.5 roms that has a look a like HTC ablum look to it, but i cant find a cab using "htcRIE_0.4.0.47"
little help will might ...
You do not search for it at you WM ROM,
Search at the site...
Anyway i have been find it for you !
A newer version of htcRIE, enjoy!
michealmyers said:
im trying to extrct the streaming media player cab...the one thats in most of the 6.5 roms that has a look a like HTC ablum look to it, but i cant find a cab using "htcRIE_0.4.0.47"
Click to expand...
Click to collapse
i have that program, but im unsure on how to properly use it to get the cab files.....can u help me?
michealmyers said:
i have that program, but im unsure on how to properly use it to get the cab files.....can u help me?
Click to expand...
Click to collapse
With Visual Kitchen, just click on the Dump button at the bottom - and then browse to the NBH file .
Dave
i guess all nbh files dont have cabs because in the dump folder it creates...its only a couple of cabs and whole lot of systems files
michealmyers said:
i guess all nbh files dont have cabs because in the dump folder it creates...its only a couple of cabs and whole lot of systems files
Click to expand...
Click to collapse
Yeah, you have to rebuild the EXT packages to CAB's I don't know if there is a tool for that actually. Might be better dumping it the Dave (TyTNII) way, that will give you OEM's. There are tools for OEM 2 CAB.
Jason8 is working on a tool to convert all 3 all ways IIRC.
Dave
the nbh extract file launches for a quick second...it doesnt stay on the screen, as well as a lot of other files such as nbh split....do i need to update something in order to have these programs run properly?
michealmyers said:
the nbh extract file launches for a quick second...it doesnt stay on the screen, as well as a lot of other files such as nbh split....do i need to update something in order to have these programs run properly?
Click to expand...
Click to collapse
You have to run them from the windows command line (CMD.exe). If you really want me to, I'll upload a batch file I made which automates most of this. You just put the NBH and tools in certain folders and run the batch file and it does the rest.
DaveTheTytnIIGuy said:
You have to run them from the windows command line (CMD.exe). If you really want me to, I'll upload a batch file I made which automates most of this. You just put the NBH and tools in certain folders and run the batch file and it does the rest.
Click to expand...
Click to collapse
that would be so helpful
Alright, I fixed all the bugs in it (it was still in progress) and added some new features I had meant to add for a while, such as renaming the processed files by date processed (though you probably won't need them if you're only extracting one ROM). Hit [WINDOWS KEY] and R on your keyboard at the same time to open the Windows Run dialog, and type "%USERPROFILE%" without the quotes. Simply unzip the file and drag the folder called "Flashing" in the user folder (it's vital to have the Flashing folder in the correct spot. Otherwise, the entire script will fail). Place the NBH file you want to extract in the NBHDUMP folder (in the Rhodium folder, which is in the Flashing folder), and go to the IMGFS folder (in the Rhodium folder, which is in the Flashing folder). Now, run RhodiumRomDump.bat and the dump should commence, and a folder with your dump should appear in the same directory.
If anything should go wrong, please tell me so I can try to fix it.
EDIT: Please redownload, all issues I could find are fixed in this version. If you get errors about needing MSVCr71.DLL with this version, google is your friend.
maybe im not doing something right, ive been at it for days now...i put the "flashing folder" in C:\Documents and Settings\Sean (sean's my name..haha), put the nbh file in the NBH folder, ran "DumpRhodiumRom", i got 2 folders named "and" and "Setings"....when i run "dumpRhodiumRom", its just stays on the screen for half a second
ive extracted the rom before using visual kitchen...im trying to get some of the programs into cabs...the problem is that in the dump file, i see the programs i want, but they arent in cabs, so i cant just take its "exe" file and put it into another phone (well at least that didnt work for me)
michealmyers said:
maybe im not doing something right, ive been at it for days now...i put the "flashing folder" in C:\Documents and Settings\Sean (sean's my name..haha), put the nbh file in the NBH folder, ran "DumpRhodiumRom", i got 2 folders named "and" and "Setings"....when i run "dumpRhodiumRom", its just stays on the screen for half a second
Click to expand...
Click to collapse
That's odd. Can you tell me two things?
Where do these folders ("Settings" and "And") show up?
Hit [Windows Key] + R and type "CMD" (without quotes), then hit okay, then type "cd %USERPROFILE%\Flashing\Rhodium\IMGFS" (without quotes). Now, type "DumpRhodiumRom" (without quotes), and tell me exactly what is says (you don't actually have to include all the formatting and everything). Also, if you could tell me what color it's in, that would help.
I'm going to test it in a virtual Windows XP environment and see if it's compatiblity with XP that's the problem.
EDIT: So the problem seems to be the fact that it doesn't like the spaces in the folder name "Documents and Settings", hence the creation of the "and" and "settings" folders. Unfortunately, it's an important folder, so renaming isn't really possible. However, I think I know a simple fix to the original script, so I'll test that and post it shortly.
michealmyers said:
ive extracted the rom before using visual kitchen...im trying to get some of the programs into cabs...the problem is that in the dump file, i see the programs i want, but they arent in cabs, so i cant just take its "exe" file and put it into another phone (well at least that didnt work for me)
Click to expand...
Click to collapse
Try downloading cabtools V 0.3 and use pkg2cab to build the package back into a .cab file. I've never done it myself, but this looks like what you want.
DaveTheTytnIIGuy said:
That's odd. Can you tell me two things?
Where do these folders ("Settings" and "And") show up?
Hit [Windows Key] + R and type "CMD" (without quotes), then hit okay, then type "cd %USERPROFILE%\Flashing\Rhodium\IMGFS" (without quotes). Now, type "DumpRhodiumRom" (without quotes), and tell me exactly what is says (you don't actually have to include all the formatting and everything). Also, if you could tell me what color it's in, that would help.
I'm going to test it in a virtual Windows XP environment and see if it's compatiblity with XP that's the problem.
EDIT: So the problem seems to be the fact that it doesn't like the spaces in the folder name "Documents and Settings", hence the creation of the "and" and "settings" folders. Unfortunately, it's an important folder, so renaming isn't really possible. However, I think I know a simple fix to the original script, so I'll test that and post it shortly.
Click to expand...
Click to collapse
This is What i got....where the "and" and "settings" folder apear is "untitled2.zip"