model id error on rom upgrade - MDA III, XDA III, PDA2k, 9090 Software Upgrading

hi
im trying to flash the rom 1.35 from harrier to imate pda2k..then i plan to flash the gsm radio.nbf to make it work
but when i start the harriers upgrade utility from the ftp site i get a model id error...
how can i get past this?
thanks

Harrier is CDMA. If you flash its ROM to PDA2K you'll get an unbootable device.

ok how about flashing the pda2k with alpine rom ? how can i make the model id error go away on that?
thanks

It will never work! Since there are differences in the devices (Hardware, memory address, etc.), you will kill your handset by flashing an invalid ROM. If you really want to update your Harrier ROM, you can try the ROM from Telecom New Zealand. I helped one of my mate who "accidentally" flashed His iMate PDA2K EVDO with a XDA II ROM.
Have a check on this page:
http://www.geekzone.co.nz/content.asp?contentid=3981
Hope this will help! Cheers!

Sorry man! I thought you are going to update a Harrier! Please ignore the Harrier ROM stuff.
However, the bottom line is Alpine ROM should not work with your Blue Angel device due those reasons I mentioned.
Cheers!

Related

Plz help... No Service after radio upgrade

Dear friendly XDA-Developer,
Three days back, I tried to upgrade my ASIA IIs radio from 1.02 to 1.12. It all went smoothly, but however, my IIs had been without signal and all it says is No Service. I've tried to search through the forums, but to no avail. Kindly please help... I'm at my wits end.
Thank you all!!!
Not sure were or what files you used, if they were type I or II, so I would just sugesst that you Reflash using the files of wiki.
Hi, thanks! I practically tried all the other radio roms for BA thats available on the ftp://xda-developers, but all give same results... Is it something to do with the radio rom or my phone?
You can't try all roms of the download site for they wont work unless you know what you are doing, (correct rom type ect).
Just make your life easy and go over wiki, download, read and install, its worked for many before you.
Read below this
Dear MDAIIIUser,
Like what you've said, I've read through the wiki BA guide, over and over again. I've followed throught the tutorial carefully and still, it didn't solve my problem.
I've some queries here:-
Firstly, if I use an incompatible radio version, would it affect my XDA IIs? I mean, I've successfully upgraded my CE Rom to 1.40 WWE previously and it worked flawless with cooked 1.40 Ext Rom, however, the moment I upgraded my radio rom, my phone feature cannot be utilised. It just says No Service. I've seen on the forum Asian users using Qtec 1.08 radio rom.
Secondly, my understanding on the Oper and WWE is that by setting them correctly with XDA3tools, I can then upgrade them to my XDA without facing any country code errors or such. But would it affect my XDA functionality?
Lastly, can you make any recommendations on which is the most appropriate CE/Radio ROM version I should use for my XDA IIs based on WWE & O2ASI001?
THanks a millions! Believe me, I've really tried very hard to get my IIs to work and have throughly read through the guide, but to no avail...
I recommend that you just download a FULL, fresh, 1.40 Shipped EXE (I recommend the I-Mate one) and upgrade with it.
Use the first method described here to upgrade.
Dear TheLastOne,
I'll try that now! I'll post the results after that.
Thanks a millions!
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
khngaroo
Could it be that your device is sim locked or that your sim card is no good?
Dear MDAIIIUser,
I believe that my SIM is not locked as I can make calls using the same SIM with another phone. When I insert my SIM card into my XDA, there wasn't any prompt or indication of my device being locked... Is there another way to verify that?
Thanks!
khngaroo said:
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
Click to expand...
Click to collapse
Hi KHNGAROO... I am not an expers as TLO and MDAUser..but you can give a try downloading the 1.10 radio and downgrading your 1.40 istallation thet contains 1.12 radio to 1.10... I experienced a lot of problems on my device ( low signal or no signal) with the 1.40+1.12 radio combination..and I solved with hios trick..Dont know if can work for you..but maybe you can try..byez
khngaroo
The fact that you have no service would or could indercate that it is beining rejected by your network operator.
Alas, I have no Idea what message you get when a BA is locked to a sim.
(as in the provider has SIM locked your device so that you can only use it with that sim on his network).
The fact that you can use your sim in a different phone proves that the sim is not faulty however that does not verify if the Phone is sim locked.
Thus can you insert a sim from another device that you know that works into your BA and use it.
I have no idea what you had on the phone before you upgraded it nor if it worked, nor if you have also changed your sim so its just a bit hard to work out your probem.
At the moment it could be a locked device or a faulty instaltion of the radio rom.
You might have to go back to your Shipped version to verify if the device still works.
Then upgrade the OS only and check again
Then cook the Extromn to make sure you are not downgrading anything with the new 1.40 OS
Then upgrade the radio to a higher version 1.10 to verify if it works
The upgrade to 1.12 to prove or disprove vicer's very good suggestion.
Have fun
Be careful with the files that you use as you can't use Type I upgrade files to upgrade a Type II rom. Thus you will need to always download the files based on wiki and not reuse the old ones.
Dear MDAIIIUser,
I've flashed my original shipped asian rom back to my device. Got the SD bootable from my pal holding the same phone. Didn't work, still says No Service. I guess either my device is locked or the hardware is screwed.
Is there anything I can do to unlock my SIM on my XDA, should it be my XDA being locked. Or do I really have to bring it down to the service center to get the whole thing fixed?
Thanks a millions for all your help... Appreciated...
You still have not asnswerd the question of the sim. So I still dont know if it is the original sim or if you are using another on on a locked device.
So based on what I do know:
If you flashed the original Rom and have the correct sim and it does not work then your device needs to be sent back to the shop (which will be no problem as you have the original rom in it).
Wiki has a how to unlock (but like I said I dont know if that is your problem)
To all whom had helped me along the way (esp. MDAIIIUser & TheLastOne & vicer)
Brought my XDA IIs to Accord Dist and got it fixed. Now its back. I was told by the customer service operator that they had replaced the whole mainboard altogether. They didn't tell me what was the exact problem. Guess it was the hardware all along. But I was wondering, how on earth can flashing a ROM cause so much damage?
Therefore, here is a warning to those who wish to flash their XDAs, please do so only f you know what exactly you are doing. Please read wiki carefully before you try anything, or you might end up just like me, hee...
Well glad you solved your problem. There are a lot and I mean a lot of people that have been able to falsh thier device via this forum. But as you said you need to read and understand what you are doing.
So what rom do you have now and are you going to keep it?
(Not sure based on your sig)
Dear MDAIIIUser,
Weel, I've upgraded my CE rom to 1.40. However, I've decided to maintain my radio rom as it is (1.02), its kinda like once bitten twice shy. Quite sceptical that my IIs might end up in heaps again, lol.
Thanks again for all your help and concern.
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
TheLastOne said:
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
Click to expand...
Click to collapse
Dear TheLastOne,
I took your word for it and gave it another shot! Followed all the instructions found at WIKI and presto, it worked and now my IIs is running on 1.40 CE and 1.12 Radio.
Many, many, thanks to all of you who had helped along the way!
khngaroo
Great, Happy for you.
The 1.40 rom has a few issues that can be found on the wiki Upgrade page that you need to be aware of.

Wizard Radio Rom Only Updaters (Updated Topic)

Running this RUU will only update your Radio Rom. You will not lose any settings.
These are all in English.
2.x Radio Roms are for use with 2.x Bootloaders only.
They don't work with 1.x Bootloaders (IPL/SPL Versions 1.x). The good news is that since it doesn't dork your BootLoader if you goof you can still reflash with your original Rom and recover your device or use the Cingular 1.09.10 Radio Only Rom included here.
How To Use This RUU Package
1. Select the Radio Rom you want:v1.09.10 from Cingular 1.08 Rom.
v2.25.11 from the leaked Cingular 2.25 AKU 2.2 Rom. Several users have reported that this improves their reception.​v2.25.11 from the leaked Test T-Mobile (US) 2.24 AKU 2.3 Rom. It is also listed as version 2.25.11 but the file is not an exact match to the Cingular Radio Rom.
v2.07 from Summiter's Cingular 2.17 AKU 2 Rom, which was made using components extracted from a device with what is believed to be the mysterious Cingular 2.23 AKU 2.2 Rom.
v2.19.11 from the T-Mobile UK 2.21.0.206 Rom Release, for our European Brothers (and Sisters).
v2.19.11 from the T-Mobile Dutch Website, for our European Brothers (and Sisters).
v2.21.4 from the Xda Minis 2.24.4.101 Rom, for our European Brothers (and Sisters).
v2.27.11 Prodigy Radio Rom. As provided by ShogunMark.
​2. Download the Zip file.
3. Extract the contents into an empty folder on your PC.
4. Make sure you have established a usb connection with your device (Activesync as guest is okay)
5. Execute the RomUpdateUtility_Wizard_NoID.exe
6. Follow the prompts.
Don't worry it won't overwrite your existing Extended Rom, Storage Area or OS so the PDA side of your device will remain untouched.
Just wondering, isnt this the same radio rom thats in the new beta T-Mobile rom?
nickcerda said:
Just wondering, isnt this the same radio rom thats in the new beta T-Mobile rom?
Click to expand...
Click to collapse
Reply by Kyphur
The version number is the same but there have been numerous reports of better performance with the Radio Rom from the leaked Cingular Rom.
So the answer is Yes and No apparently.
If you're not experiencing noticable issues then why bother flashing it. On the other hand it certianly won't hurt to flash it.
Reply by Gamescan
Before I build the "Mr. Clean" AKU 2.3 ROM I did both a binary compare of the T-Mobile 2.25.11 Radio ROM and the Cingular 2.25.11 Radio ROM.
They are *different* files and do seemingly get different reception. In testing on a WIZA100 device, the Cingular version was noticeably better. I haven't gotten around to testing on the WIZA200 yet, but I'm expecting to see the same performance.
As a result of the tests, I included the Cingular version in "Mr. Clean" and kyphur was kind enough to package it separately after people asked for just the Radio ROM.
I downloaded and used the radio update from this thread with no problems it only updated the radio and left my settings intact.
Thanks for the file I need the improved reception
R
Thanks for the Rom, 4 bars at my desk where I used to have 1.... T-Mo Vario
Well, I just ran the ROMUpdateUtility_Wizard_NoID.exe and it completed the installation with my settings intact (in fact, the install only too a minute, whereas the full T-Mobile ROM took well over 5 minutes to complete).
My 8125 is running the AKU2.3 custom Cingular ROM that already had the T-Mo 02.25.11 Radio version. So, I don't have any absolute way to say that the Cingular 02.25.11 installed successfully, guess I'll have to test the signal now
Thanks for the updated Radio ROM
tokuro said:
i just updated my MDA (1.x ROM). it's no good and i had no radio working. I could not even connect via AS.
I booted my phone to bootloader and downgraded to 1.13 and all is ok.
Click to expand...
Click to collapse
Thanks for the report, I'll edit the Original Messege to reflect this.
Works OK on KJAM 2.16.9.1 stock
Hi there,
I installed Cingular radio 2.15.11 on K-JAM running stock latest image:
2.16.19.1.
It installed OK, works OK and so far reception seems better.
Thanks for all the effort providing that,
Hal.
gamescan said:
I know this goes against conventional thinking, but has anyone tried to flash this to a CID LOCKED device? I'm curious if it will work as it doesn't touch the OS or the bootloader. If it does work it'd be a must have upgrade for pretty much *everyone* out there.
My devices have long since been unlocked so I've got no way of testing it.
Click to expand...
Click to collapse
Yep it will work. It's really just the initial and secondary program loaders that are affected by the CID.
Thanks, Kyphur, for posting the Radio ROM
Installed w/o any problem, runs also very well
Cheers
hrb
cingular radio > tmobile radio
I've tried both and I noticed that the cingular is better. Why? Because with the tmobile one my push email would never sync properly on the mda. The cingular is fast and perfect. How fast you might ask? Well my mda receives the notice of new email faster than my Outlook client. But the original tmobile rom, my signal never dropped below 2 bars. The cingular drops 2 bars but that's 60% signal from the reading I get from Voice command. But I've talked for longer than 10 minutes on my phone and it's worked just fine. Kudos to Kyphur for sharing this with us.
gamescan said:
mengesb said:
Hey kyphur,
Well, Summiter put in the radio rom from Cingular's 2.25.11, and I tell yah, I'm still suffering from the same problems. the only choice I have left is the original 2.17 radio code, which I guess I'll have to try once I get around to seeing my home computer - been mobile for 3 days, haven't even seen my own grass... sigh ...
AKU2.3 Radio rom based on t-mo ... failed wifi on pre-n
AKU2.3 Radio w/Cingular 2.25.11 ... failed wifi on pre-n
MengesB w/no Wifi on pre-n ... pre-n failed MengesB!
Click to expand...
Click to collapse
Have you tried a different router? The one thought that pops to mind is that perhaps something in the firmware of the pre-n router isn't completely 802.11b compliant? After all, no 802.11n routers are final yet. It's quite possible there are still bugs on that end.
Click to expand...
Click to collapse
I know officially the stack on Q.11n isn't official, but the router is set to be compatiable with both G and B flavors of Q.11 sequences. What's more disturbing is that it was working with 1.8.11 WWE (stock). I know the firmware in the router is good, works with a Dell TruMobile Wifi, Moto G Wifi, Centrino internal Wifi, and Broadcom Wifi cards... so we've been around the block with Pre-n connecting on a G and B platform systems - it simply does not like my phone. I do have the G hack enabled through Sum Sum, and tried removing it - no difference.
I haven't tried other G routers, besides my SRX100 router, and even with this one its spotty at best - requies disable/enable occassionally when it 'loses touch' with the AP.
I'm wondering if 2 hours of ethereal logs might be required to find out where in the Q.11 stack stuff is messing up. Networking is my ball of wax, and it doesn't make sense to me if a device ARPs for an address, and the device REPLIES saying, "Yeah sure buddy, here you go: x.x.x.x" and the device simply IGNORES it ... kinda confuses me - like a Cisco 2600 that just came back from repair and the stupid idiot soldered a jumper cause 'it was loose'... ugh... numbskull
has anyone in california had good signal with the 2.21.4 radio rom??
ERROR 300 INVALID UPDATE TOOL
Hi,
I've a i-mate k-jam with English rom 2.16.9.1 and radio 02.07.10
When I try to upgrade the radio with the: Cingular_2.25.11_Radinly I received the following erro:
ERROR 300 INVALID UPDATE TOOL
Many thanks
Re: ERROR 300 INVALID UPDATE TOOL
gerard001 said:
Hi,
I've a i-mate k-jam with English rom 2.16.9.1 and radio 02.07.10
When I try to upgrade the radio with the: Cingular_2.25.11_Radinly I received the following erro:
ERROR 300 INVALID UPDATE TOOL
Many thanks
Click to expand...
Click to collapse
Is your phone CID Unlocked?
yes it is unlocked
similar problem....
I am on the imate rom: 2.16.9.1 WWE, radio 02.07.10
I have tried updating to the XDA MINI S Radio rom, and it seems to be succesful, however it still shows as radio rom 02.07.10
any ideas??
gerard001 said:
yes it is unlocked
Click to expand...
Click to collapse
Next question, are you extracting the contents of the zip file into an empty folder? might you have extracted into a folder containing an unhacked version of the updater program and by mistake running it instead of the NoID version?
I unpacked to a new folder.
I think the problem is with the rom that we already have installed that "maybe" is bloking the update ?
kyphur said:
This is the Radio Rom version 2.25.11 From the leaked Cingular 2.25 AKU 2.2 Rom. Several users have reported that this improves their reception.
Click to expand...
Click to collapse
Ok, well my problem has been fixed by using the cingular radio rom.
Successfully showing Radio Version: 02.25.11
maybe try that one gerard?
I will try it, but I think it's the same that I already used...
Thanks

T-Mobile MDA Software Version (2.26.10.2)

I have an unlocked Cingluar/Siemens BA that I have been using with Tmobile. I am not confident enough to update the ROM on my own through the info on this and other sites.
On Tmobile's website, if I choose the MDA as my phone I can download their latest ROM version of Windows Mobile 2003 (2.26.10.2). I currently have ROM version 1.32.10 WWE, so I am assuming this is an upgrade for me. Will this work if I try to do it on my SX66 or simply destroy it? I mean they are both running Windows Mobile right?? Again, Im not to keen on this stuff. Any info will help, thanks!
If you use standard, operator-provided upgrades, exectuable checks your hardware and will refuse to install on not supported device. But upgrade will be refused even in situation, when you have Qtek 9090 and try to upgrade with t-mobile MDAIII ROM even though those are identical devices and ROMs are 100% compatible.
SO: if you try to use not modified, original ROM, there is no big risk of failure, but also there is little chance of upgrading, until you upgrade exactly the same device, as was sold by the operator.
I propose you to read Wiki - you will find a lot of information and you will be able to rethink about upgrading to WM5.
One more thing... MDA's are Wizards, and SX66 are BlueAngels...
Totally different phones. The ROM will most likely break your phone. Check for the latest WM5 ROM in this forum for upgrade.
i realize the MDA is a wizard, but I figured since they are running the same software it might work. With that being said I guess you have answered my question. I guess I'll take my time and try to follow the info on this site and WIKI one more time. Thanks for the info.
T-Mobile MDA III is a BlueAngel.

Radio 1.02,anyone have a copy of it.

I am trying to upgrade to radio 1.15, but I have been unsuccessful thus far. If I read the wiki right I can perform the upgrade by placing the new radio rom in place of the radio on the original ship rom, but i can't find it for download. I have a BA on the cingular network so I beleive that 1.02 would be the original shipped raio rom. any help is appreciated.
thanks
Try this. This did the trick for me. Just put the device in boot loader, disable usb connections in activesync. and run the exe
ftp://xda:[email protected]_1.15_Type_II/X(M)da3_RadioUpdate1.15.00.exe
Nope, I got a country ID error with that. Thanks though
Need one too.
I need one too. After I upgraded my ROM, the phone is getting worse in term of receiving signal. I used to be able to use it almost everywhere. But now, I hardly be able to use it in the locations with a weak signal (e.g., basement). I remembered that my old radio ROM is 1.02.00 which is the original ROM that came with O2 XDA IIs.
Opps wrong one. Try this one. Just Unrar the file and run the noid update after that.
ftp://xda:[email protected]_1.15_Type_II/BA Radio 115 THIS WORKS.rar
thanks for the help. that worked with no problems.
ftp://ftp.xda-developers.com/BlueAngel/Radio_Roms/
Try them all, especially the ones from the shiped roms on the top of the ftp list

Help Downgrading WM6 to WM5 Cingular 8125

Hi,
I have a Cingular 8125 phone, I upgraded it WM6 with one of the ROM that I downloaded from xda forums. I do NOT know which one that I downloaded. I remember downloading and installing one of the T-Mobile stuff, then flashing a new WM6 ROM from this forum. My phone locks up every time AFTER I receive/make a phone call. I would like to go back to stock WM5. I have no idea how this works, but it appears that I am running the risk of bricking my device if I do it wrong. Any help would be appreciated. Following is the details of what I have.
During BOOT it shows
T-Mobile Logo
IPL 3.08
SPL 3.08
GSM 2.25.11
OS 6.1.0.0
After boot,
About page says Windows Mobile 6.1 Professional
Device Information page says,
ROM Version: 6.1.0.0 WWE
ROM Date: 1/16/08
Radio Version: 2.25.11
Protocol Version 4.1.13.12
Thanks,
JSenthil
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Isn't that I first have to downgrade my SPL/IPL to 2.xx in order for the original WM5 to work on my G3 wizard?
Can you please explain the steps involved? BTW, where can I find the original ROM, are you referring to the one that can be downloaded from the HTC website?
Thank you for your help,
JSenthil
Unfortunately I installed iPhone skin onto my Cingular 8125. I would like to revert process and get back my WM5, but I tried "hard reset" (Comm Mng + Voice buttons and poke reset with stylus) and nothing. Keeps going back to the iPhone skin. Few things do not work, still has scroll bar on side, connection and battery icons and no lock mode. Contact list feels like iPhone, but is not well developed, still has bugs and menus to la-la land.
Please help, I don't know much about WM5 or cell phones.
Thanks!
rapanui
ricomilion said:
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Click to expand...
Click to collapse
ricomilion,
Could you hook me up with the Cingular/At&t original WM5 ROM?
Thanks,
daveetrice
Yes, id like the cingular wm5 stock rom as well if possible...im having problems after "upgrading" to wm6 too.
WM6
Can someone help for locate the WM6 ROM for the 8125 also WM5 so I can scale back if 6 hoses up my phone? Thanks.
Maybe my ROM's would work for you guys
Cingular Official stock wm5 Rom :-
http://www.htcamerica.net/support/8125/software-downloads.html
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe

Categories

Resources