Need Help with my dead XDAIII - MDA III, XDA III, PDA2k, 9090 Software Upgrading

When upgrading to a new rom i removed my qtek 9090 from the cradle.
Now i can't do nothing with it, it0s stuck in the USB and V20.6 page and even when i try the sme rom that it had before the upgrade it always says country error, i've tried the contry error fix but nothing ...
Can anyone help?
Thanks!

You will need to flash it with the original rom even if it is an old one.
Once you have got it up you can upgrade it to something else.
Wiki has the list of the original roms.

Related

Downgrading from WM 2005 to the original ROM

Hi Guys,
I have an I-Mate PDA2K with problems.
I'm new on this site and I'm in a bit of a pickle with the 2005 upgrade ROM...
The upgrade went fine and it was interesting to see what can be expected from the new OS but it still isn't user friendly enough for me just yet.
My problem is that I can't downgrade back to the original ROM, I have a copy of it which I have used several times but now when I try to reflash it it comes up with an error saying...
"ERROR 120: COUNTRY ID ERROR"
"The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update"
Then it lets me choose "Exit"
This as you can imagine is quite worrying as I have now lost most of the original functionality of the device.
If anyone knows how to remove it so that I can replace with the original OS I would be very grateful.
Thanks
Terry
PS - Please send any ideas to [email protected]
Thanks
You need to go into bootloader mode first. Check the Wiki.
Thanks Mastiff, you're a Star
No problem. But you can't lock/hide your extended ROM again, which I suppose you've already found out.
I'm a bit confused- it says on the wiki that if you downgrade to 2k3se from 2k5 after repartitioning DOC, then the ext rom will forever be visible. Why isn't this the case with mine? I followed all the instructions, copied my ext rom over after repartitioning a new ext rom and hard reset and it has disappeared again. Not complaining, just thought the doc repartioning tool reset the rom password.
Anyone else had this?
Im using XDA IIs, i've just rolled back to WM2K3SE and i couldnt see my O2 Connect applications and auto configurations tools ? where does it's go?

Help installing Original ROM after Upgrading to Custom

Hi
I tried upgrading to the rom below
Custom_RUU_Wizard_1050402_101_11210_O2_ENG_CID.exe
but it made my imate totally sluggish and really slow, especially when opening mesages etc. I decided I wanted to revert back to the original imate ROM but when I was installing it it failed before even getting to 1%
It stayed at the point where my k-jam was red blue green etc
Anyone suggest why this might be the case?
Also can someone explain what the CID unlocker is used for? Does it allow you to 'downgrade' ROMs?
Thanks for your help guys. I'm still quite new to this
Scaseman
CID unlockeris is needed to be able load roms that are not made for your phone... like MDA Vario without CID unlocker cant take rom that was made for Qtec and other way...
try RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
its the best rom for me... make sure you run CID unlocker first and after WM5 loaded hit reset on your phone so it wont load cabs from extended rom (if you dont want them)
how to reinstall ROM of XDA ll mini
i tried to upgrade my XDA ll mini ROM with 'XDA ll upgrade file' given at 'o2-online.de' instead of giving me error report at the beginning of upgrade it started erasing my ROM and then gave me an error.now my rom is erased and it cant be turned on.however when i connect it to the pc through USB cable ,on the srceen "USB v1.02" is being displayed.how to reinstall the software and where can i get the download file.please help i used my phone 1 month back.

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn

Hang in bootloader

Hi @ all,
**** happens, yesterday i tried to upgrade my rom on charmer (mda compact 2).
During installation system hangs on and didn´t finish.
So now i have only the startscreen and can reach the bootloader.
Tried now to flash an original rom, the ruu says error 294 invalid vendor id.
Otherwise the ruu (for no id) ended with error 238 file read.
My bootloder shows IPL 1.12, SPL 1.12 and USB connected.
I have read a lot of threads but cant find a answer for that.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
ronni
Hi Ronni,
same problem here. Do you found any solution?
Is it right, that your Device not charging and USB is not recognizing too?
Bg
Joy
Are you trying to flash WM6 ROM to your charmer? Because WM6 required IPL and SPL level at least 2.xx.
Did you tried this method to bring charmer back to life?
wow, thank you for your quick response. Hmm, I´m not shure, it´s a PDA from a Collegue, I don´t know, what he do with it. (I know only he try to flash something) Next week he take it to our office, then I try your solution
Thank you again
Joy
Bootloaderhang
Today i tried to update my rom... while the update i had an error.
i had updated the http://forum.xda-developers.com/showthread.php?t=363882
after the hardreset the phone hang by the first screen. I can press everething but nothing happens.
now I tried to flash a nother rom but it is unpossible because it can´t connect with windows mobile center on the pc.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
didi500

Yet another Herald dead...

I tried all I found in this forum, but I couldn't solve the problem... I always get the ERROR [300] INVALID UPDATE TOOL
It seems that the only way to restore it is to load the original ROM, but I don't know which one it is (I suppose it's a WWE version...); I tried to get the device ID with the USB sniffer method, but it can't be read (Error!).
The internal label shows following:
P/N:99HCL042-00
IMEI:352442016058693
S/N:SZ705FS00599
and there is a second label with
1097-32-061445
SZ705FS00599
IPL/SPL are both 01.008.0001
Can anyone help me???
Thanks a lot,
Jeff
First of all, did you search the Wiki ?
Possibly your IPL/SPL is too low.
If you think that's the one, try to download the WWE official ROM and try to flash it.
You should tell where you found/bought the device and which was the version you were using before having the device dead.

Categories

Resources