Aarrrgghhh... panic... I have editfix 1.40 rom for BA and start installation.. then my Qtek 9090 is dead.. and I have a 101 DEVICE error.. after some panic I started official italian rom upgrade and it'uploading now... any ideas please? can I re-try with the upgrade, I was wrong or something else???
Thanx
aaahhhhhhhh second time all ok
Yes 2nd time all is ok... but my heart is dead...****...
Umm...does that mean you have resolved the problem?
problem resolved with a second time... but what a fear.. now with 1.40 rom this strange G icon always on... it seems I'm downloading, in 1.22.04 was always off...
i think they changed to look like the one on the imate jam...
Related
I tried to upgrade my Qtek 9090 an failed.
At first i seemed to work. But then it stopped and said "connection error".
When I now boot my 9090 I only see a dark screen.
You can see "USB v2.06" in the background.
I have tried to upgrade again but with no good result.
Please help me!
I have searched about my problem.
It looks like my Qtek is stuck in "bootloader" mode.
To solve this it looks like I must get it to a repair shop?
Or I can get an external boot rom in to an SD-Card and insert in my Qtek.
Correct me if I am wrong.
So. How do I move on?
What file do have have to use?
Should the CD-Card be in the Qtek or kan I use en extarnat SD-Card writer from my PC?
I have the program Multi-port/USB TTY.
Please help me!
Looks like I fixed it my self.
I got an idea from another i this forum.
He told me to try upgrading again on a Computer wich have USB 2.0.
My computer have USB 2.0 and that did not work so I looked futher in to my trouble.
I took my girlfriends computer (AMD400mhz, Win98, USB1.1) and tried upgrading on that. Lucky for me the upgrade program found my Qtek 9090. But when upgradeing I got an error on my extended rom upgrade.
I tried again but exluding the exended rom file when upgrading and now it works.
I still would like to upgrade my Qtek with this rom file BA_WWE_BP_12200_169_10602_SHIP.zip but I will not do this unless I am shure this works.
Thanks the people who have tried to help me.
My Qtek now have the following versions:
ROM 1.22.00 WWE
ExtROM 1.22.126 WWE
Radio 1.06.00
Hi all,
we found the update for a Qtek 9090. Here for any who need it to:
http://www.xtrem.cc/html/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
greets
werner
http://www.xtrem.cc
http://www.sfx-team.com
http://www.hochzeitsfilm-hochzeitsvideo.com
dead link
please upload to the FTP.
dead link
try this ...
http://www.xtrem.cc/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
Cheers,
Hawk
Hochzeitsvideo ??? :lol: :lol:
However, I tried last night to make my XDAIII work with the 1.40.01 ROM, but no way to upgrad that ****. I read something about to use instead of the "BaUpgrade..." the "MaUpgrad..._noID.exe" because sometimes we got some problems with "Country ID Error". I supposed to use the MaUpgrade exe-File with the 1.40.01 ROM Update, the proggi ask me if I want to upgrad from 1.31 to 1.40 ROM vers. and Radio from 1.10 to 1.13 - click OK. done. XDA screen's backlight flashed off and "USB" stands at the top and the Version at the bottom. Ok... after a few sec. the update proggi said: ERROR 120: Model ID Error .... your device isn't designed to work with this patch.
I don't know what tha hell 's goin' on with that thing. Because many other guys in our forum already done this.
do the flash in 3 steps
1) 1.40.1 CE
2) Radio following wiki.
3) Flush the extrom
The 1.40.1 is a type II rom and the radio is a Type I.
Make sure you only use the files that are posted and dont mix them around.
You also might be having problems as your device has a differernt Version Number (that is if you have a camera) thus you need the MA tool.
Hi,
I've done it yesterday night/today morning. I downloaded the vodafone VPAIII update and the Maupdate, extracted the exe to folder and packed the maupgrade in it. started maupgrade "ERROR 120: Country ID Error", aight, "EXIT" started program once more, works ! Great, now I have the 1.40.01 GER ROM and the 1.13 RAdio Version.
And a fully Vodafone branded o2 XDAIII :lol: :lol:
I'll de-brand it today night and install some of the o2 CAB's. But at the moment I'm thinkin' to installe magneto - not sure because of the per4mance probl. :roll:
thx !
I recently upgraded my Qtek 9090 from Win 2003SE, to WM5 according this thread http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade.
I had some problems with this WM5 so i decided to downgrade again to Win 2003SE with this ROM : http://forum.xda-developers.com/viewtopic.php?p=129930#129930
The problem is that i now have problems because i dont have MMS messages (but i have text and Email) and sometimes the screen keypad when selected appers on the top of the screen, not letting see several information.
Can please anyone help me?!
I try to answer you because i had the same problem i think and nobody answer me (thanks!!! :twisted: ) See the post above
After a downgrade in my extended rom no more mms. The problem for me it was the size of extended rom . When i downgraded my wm5 to wm3 without resizing my ext rom any attempts to upgrade any new ext rom seems to be ok but really nothing happens.
So i resized it on 16mb (1684kb) with doc repair and after the last upgrade of my network ext rom everything it's ok.
I don't know if your problem is the same but .... try.
Regards
cescof
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
Hello guys ,
I have update my Qtek 9100 into WM6 but lately got problem that my PDA being slawly in the move and the action.
i wonder if there is Faster image for my PDA ?
i have followed this instruction to remove HardSPL but it doesn't work with me , when it starts the communication My PDA goes off.
http://forum.xda-developers.com/showthread.php?t=342744
84 Visitor and no buddy helped ?!!!!!!!!!!
Extra information my
IPL 2.26.0001
SPL 2.26.0001