After upgradeing my SPV M2000(blue angel) to 1.40WWE thanks to xda-developers.com, I was just wondering if theres any way to change the splash/start screen you get when you turn it on?? I have done a search and couldnt find anything.
Try here
http://forum.xda-developers.com/viewtopic.php?t=12898&postdays=0&postorder=asc&start=0
and if you can sort my problem out (see later posts in the thread) I'd be a happy bunny.
Related
I have an O2 XDAIIi that turns on and just stay at aligning page and X point just keeps moving around and around after I press it. It will not go pass that page. Anyone knows how to repair this problem, please help...Thanks
I have the same problem... Anyone know how to solve???
xda11i screen align freeze
I have the same problem. so do many others. i have seen no reasonable fix. i have gone into bootloader mode and hard reset as suggested elsewhere but no good.
please help. Anyone????????
i have a same problem...pls help !!!
Thanks
Get it looked at, could be a touchscreen problem.
Reflash the Rom, if data got corrupt, it is electrical after all........
I reflashed many times, but same effect :S The touch screen is working, because when i touched the cross moving, but repeated again.
Thanks anyway.
hi have a trinity i was runing HTC_Trinity_SIM_CID_Unlock_v1 in the upgrade step the pc went down.now wen i turn on it dont pass bootscreen,any solution for this?
Yeah... I'm in similar deep sh1t... Still waiting for an answer: http://forum.xda-developers.com/showthread.php?t=310869
The answers are supposed to be in one of the stickies post on the top but us noobies cannot understand the hocus-pocus that is required to be done.
And nobody is interested in making this knowledge accessible to us. Obviously.
Edit: ok, I'm trying to bite this. Perhaps we'll be able to find a solution on this forum. Here is something I found: http://forum.xda-developers.com/showpost.php?p=1248003&postcount=48
Still don't know if it would work on SPV m700 and if it would work at all 'cos my PC does not see the device plugged in with USB. I'll keep on chewing.
If you've got any news please share with me, there may be more of us noobies here, we have to keep together!
bellhouse, hope this helps: http://forum.xda-developers.com/showpost.php?p=1302939&postcount=2
Good luck m8.
the problem is it upgrade only 1% nothing more.
I solved white screen problem installing lwsw image before.
Hope this helps
In the signature...
im stuck on the red green blue and white screen on my tmobile mda and it wont do nothing else after i turn it off and on..anyone can help me with that?
damdismoo said:
im stuck on the red green blue and white screen on my tmobile mda and it wont do nothing else after i turn it off and on..anyone can help me with that?
Click to expand...
Click to collapse
You can try a hard reset, holding in the com manager and voice recorder buttons and hit the reset. (Read the WIKI).
You will lose your data and settings, but you may recover the phone.
You could also help by telling us how you got into that state.
read this thread G3.2 http://forum.xda-developers.com/showthread.php?t=298613
Please don't post the same question in 2 different threads. Use the search button, read the stickies, this is one of the most common questions here at xda...do some research, you'll learn so much about your device, it will be worth it.
Mine is also stuck, and I created a new thread about it. I have tried different recovery theories with no luck though.
http://forum.xda-developers.com/showthread.php?t=340965 is the post. When searching I only found 1 thread appropriate, however I think I was searching only the WM6 thread, and that was my problem. I even originally created the thread in the WM6 category.
Jason
Hi All
Can someone please help me out as I have searched the forum but just can't seem to find the answer.
I did a hard SPL for G4 (prophet) I confirmed that it was a G4 before doing this and flashed a new rom, since then no matter what rom I flash (shipped or cooked) I can not get the screen to settle. It seems okay in the bootloader and the splash screen but as soon as the OS kicks in the screen moves from left to right and flickers. It also takes me a couple of attempts to get the rom to load.
The screen was swapped for a known good one, but no success and the MB has been confirmed as good.
Any suggestions would be greatly appreciated.
Flickering Screen
Hi All
Sorry I posted this in the wrong forum.
Teach me for not looking properly
Hi ALL many location bu
Hi,
I am new to the HTC Touch Pro. But not to XDA-Developers. I had a Blue angel and a TyTN II. But they kinda sucked, so I went over to the Touch Pro. Lets go to the point now.
I am looking for a program what makes your led stay on, Always. If you turn it off, it still should be on. I've seen that the led numbers affect the way the leds around the ring behave. I've been searching around for a program, but what should I search for? Its hard to search for. If I could have found it easily, I am very sorry. But I have been watching all around on google.
Thanks for watching this Thread,
-Armazia
=/ Is there noone who knows a program for this?
heya..yeah i'm searching for it too..because i missed it since i upgraded my raphael..i was buying the t-mobile mda touch pro when it came brandnew out. there was the possibility to configure the led for every special event like: new "mms, new sms, standby..."...it was in the system-configuration menue under "notifications".. i cant find the original base cab/rom from t-mobile (germany). i just found the updated one for the mda touch pro. so hopefully someone is finding that cab file...
-WaqihZal-
Well,do you know about some SDK for the LEDs? I want to have notification blinking in some cases also and I want to programm it myself.