Sorry for asking such fundamental questions but i am new to this site...
I have a Orange SPV M2000 (Blue Angel)
Can I ugrade the rom on this, what will the upgraded rom give me that i dont already have and how do i do this ?
I have looked at the rom pages and can not seam to find an Orange rom, does this matter ?
Sorry if these are basic questions, thank you for your time.
I also have a m2000, was wondering if it would be ok to install the new 1.4 asia O2 rom???
Mainly want it for WMP10 due to the streaming video etc.
Have red some mixed reports about the new rom, is it actually better than 1.31???
ive upgraded my m2000 using the wiki
im basically running the imate roms as im unsure on how to play with the extended rom.
everything went fine without a hitch!
I have an orange SPV M2000, I have successfully upgraded to Rom 1.40 with Radio Rom 1.13
I am a bit of an old hand doing this as i have had a pocket pc since the inception of a ipaq 3630 many moons ago.
What you ask do you get with the updates? well the main reason for upgrading is the increased reliability. far less soft reboots due to lockups.
and a nicer interface with WM10 especially since i have a media center PC and i can automatically synch my recorded TV to the device
anyone needs help with upgrade you can msn me at stuart b ***NOSPAM***@broadbandtap.co.uk
I can't download MaUpgradeUt_noID.ZIP ?????
HELP?
Related
Hi everyone,
A quick question -- has anyone with a UK SPV M2000 successfully upgraded to the latest Imate PDA2K rom? If so, could you please post step by step instructions of how you did it?
Also, does the upgrade clear the Orange UK extended rom and replace it with the Imate extended rom?
Thanks in advance
Cheers
Nick
Orange SPV M2000
Hello mate,
It seems that we SPV M2000 are underlings in this forum, nobody seems interested in the new users.
I have unlocked the Extended Rom of my M2000 and I have installed the fax software from the Imate, and it works. I do not think that there is anything else that could be interesting there.
Also I upgraded the BT software to build 3500 which seems to have sorted out the licence and memory problems.
If you learn anything could you look out for me and let me know?
Re: Orange SPV M2000
I have just got the SPV M2000 and have been having problems with bluetooth and Jabra SP100, I think I need the BT upgrade or patch.
I'm new to the pocketPC world and rom patches etc.
jrmgolem, I would like to get the fax software installed too and the BT patch, but there is so much information on the forum, it's difficult for a newby to figure out where to start :shock:
Would be greateful if you could list the steps that you went through to do your upgrade
Thanks in advance.
Re: Orange SPV M2000
globalbug said:
I have just got the SPV M2000 and have been having problems with bluetooth and Jabra SP100, I think I need the BT upgrade or patch.
I'm new to the pocketPC world and rom patches etc.
jrmgolem, I would like to get the fax software installed too and the BT patch, but there is so much information on the forum, it's difficult for a newby to figure out where to start :shock:
Would be greateful if you could list the steps that you went through to do your upgrade
Thanks in advance.
Click to expand...
Click to collapse
No problem, if you send me you email I will send you the files. All you have to do is to copy the files into the temp directory in your M2000 and tap them, then do a soft reboot and it should then be updated.
You will need the unlocker as well, then the EXT ROM Files. They are here somewhere so I will find the url and send it.
I'd love to have it too
sent yo a private message..
thanks
belcore
Hi guys,
Just wondering if either of you could help me out...
I've not got an M2000 yet. Long story...i intend to use my work Voda SIM with an M2000 that a friend who is an Orange dealer has offered me in exchange for a few beers should i want one 8)
A little obvious but just to make sure, I presume that once unlocked, a Voda sim in the M2000 poses no problems :?:
Assuming it works with a Voda SIM, i'm also guessing the M2000 will be heavily customised to Orange. If i flash with an i-mate rom, will that get rid of the Orange customisations and provide a more generic software?
If i need a reflash, until i get the unit i've no idea what versions etc the hardware will be (or even how to find out). Can anybody offer an idiot guide of what to look for and how to flash the unit??
Any help appreciated. Thanks in advance 8)
looking for jrmgolem
jrmgolem said:
Hello mate,
It seems that we SPV M2000 are underlings in this forum, nobody seems interested in the new users.
I have unlocked the Extended Rom of my M2000 and I have installed the fax software from the Imate, and it works. I do not think that there is anything else that could be interesting there.
Also I upgraded the BT software to build 3500 which seems to have sorted out the licence and memory problems.
If you learn anything could you look out for me and let me know?
Click to expand...
Click to collapse
hi jrmgolem
saw yr 2005 contribn re fax on spv m2000
could do with that, and with escaping the orange gulag
i'm in bournemouth in yr neck of the woods
i'm techie to a degree, but not up to what you managed
any way you can assist? can discuss quid pro quo if you like
hope to hear from you
cheers
Hello everybody,
Could you please tell me what is the best ROM for my qtek 9100? I am crazy !!!!! I am not able to know it?
Thank you in advance.
esfjrg1 said:
Hello everybody,
Could you please tell me what is the best ROM for my qtek 9100? I am crazy !!!!! I am not able to know it?
Thank you in advance.
Click to expand...
Click to collapse
Define "best" for us and I'm sure you'll get many suggestions.
If you are looking for Direct Push mail, either of the released AKU2 ROMs will work fine. Who's your carrier?
The new i-mate one works great for me!
http://msmobiles.com/news.php/4983.html
Note I havnt tried the new Qtek one yet:
http://www.msmobiles.com/news.php/5026.html
I believe only Qtek and I-mate have released the new push email roms.
indiekiduk said:
The new i-mate one works great for me!
http://msmobiles.com/news.php/4983.html
Note I havnt tried the new Qtek one yet:
http://www.msmobiles.com/news.php/5026.html
I believe only Qtek and I-mate have released the new push email roms.
Click to expand...
Click to collapse
Great, I have been waiting for this link for ever. However, I have one question. If I flash to the updated ROM on Qtek9100 or Kjam for that matter, how easy/difficult/impossible it is to go back to the previous ROM.
Is there a way to create a one file EXE of the original ROM like the updated ROM ?
I am just throwing shots here. Can someone give me some info please.
Anup
araje said:
indiekiduk said:
The new i-mate one works great for me!
http://msmobiles.com/news.php/4983.html
Note I havnt tried the new Qtek one yet:
http://www.msmobiles.com/news.php/5026.html
I believe only Qtek and I-mate have released the new push email roms.
Click to expand...
Click to collapse
Great, I have been waiting for this link for ever. However, I have one question. If I flash to the updated ROM on Qtek9100 or Kjam for that matter, how easy/difficult/impossible it is to go back to the previous ROM.
Is there a way to create a one file EXE of the original ROM like the updated ROM ?
I am just throwing shots here. Can someone give me some info please.
Anup
Click to expand...
Click to collapse
it's a long story to tell.
i suggest you search "rom backup" herein and collect all that you need.
huangyz said:
araje said:
Great, I have been waiting for this link for ever. However, I have one question. If I flash to the updated ROM on Qtek9100 or Kjam for that matter, how easy/difficult/impossible it is to go back to the previous ROM.
Is there a way to create a one file EXE of the original ROM like the updated ROM ?
I am just throwing shots here. Can someone give me some info please.
Anup
Click to expand...
Click to collapse
it's a long story to tell.
i suggest you search "rom backup" herein and collect all that you need.
Click to expand...
Click to collapse
Thanks huangyz for your reply. My question was very generic since I was still in the deciding stage at that time. I have just finalized my order for Qtek 9100 today. Are you using the updated PushEmail ROM for Qtek ? Hows your experience on the stability. When I spoke to the store guys, 2 of them told me that this version is still unstable. Hows your experience been.
Thanks
araje said:
Thanks huangyz for your reply. My question was very generic since I was still in the deciding stage at that time. I have just finalized my order for Qtek 9100 today. Are you using the updated PushEmail ROM for Qtek ? Hows your experience on the stability. When I spoke to the store guys, 2 of them told me that this version is still unstable. Hows your experience been.
Thanks
Click to expand...
Click to collapse
yes,im using the newest 2.17.7.2wwe rom,it's really stable and fast , even with the omapclock set to 240MHz. my Qtek9100 has been running for several days without a restart . think this would be the contribution of the AKU2 thing.
i don't use pushemail, so, no suggest about it.
another thing i must say is that by now i have only the SPB-GPRS-Monitor plugging installed, no other Today-Addons. 'cause i need to confirm which PPC utilities would have a conflict against this new rom. I am planning to install Resco-Explorer this weekend.
Hope this could help you.
as a reference, i
hi there huangyz!
Did you ever try the Qtek Test ROM 2.8.7.1 WWE before going to 2.17.7.2 ? Would you say 2.17 performs better [without Overclocking] than 2.8? I loaded 2.8 because I wanted A2DP for BT and as I understand it 2.17 does not have A2DP, I won't be using Push E-Mail. So I am deciding if I should flash to 2.17 or stay with 2.8 and wait for another ROM.
Just to endorse Huangyz comments, I'm running the new QTEK 2.17.7.2 ROM as well and it's very very stable (I use the OMAP at 240 as well). Am using the SPB Pocket Plus on it with no issues - can't remember the last time it was hanging needing soft reset. For some odd reason I also no longer have issues with Activesync failing every few synchs but that may be unrelated.
you are probably right with it being unrelated. for me I haven't been having AS issues even with the dopod shipped ROM or the Qtek Test ROM. Can you shed some light on performance without Overclocking or would you say that overclocking is a must [I am not sure if I am ready to trade off the device's uptime for a slight increase in performance]. With the Test ROM when I listen to MP3s using BT A2DP and then try to do something else [i.e. compose an sms or type a short note/document]... the device becomes slow as a snail and it is very annoying...
huangyz said:
yes,im using the newest 2.17.7.2wwe rom,it's really stable and fast , even with the omapclock set to 240MHz. my Qtek9100 has been running for several days without a restart . think this would be the contribution of the AKU2 thing.
i don't use pushemail, so, no suggest about it.
another thing i must say is that by now i have only the SPB-GPRS-Monitor plugging installed, no other Today-Addons. 'cause i need to confirm which PPC utilities would have a conflict against this new rom. I am planning to install Resco-Explorer this weekend.
Hope this could help you.
as a reference, i
Click to expand...
Click to collapse
Hi,
I have heard alot about omapclock and about overclocking the device. I know that it shouldnt be overclocked beyond a specific limit as it may make the device unstable. But, forgive me, I had a very basic question here. What does this omapclock do ? I know it can speed up the device but it will always be at the cost of something isnt it ? So whats the trade-off here.
Hi to all, here goes my First post
Greetings from sunny Europe..
That be one..
As far as Omap. It does exactly to Wizard what overclocking front bus to CPU in PC.
Increases clock frequency that controls the cpu/ and possibly memory.
I am not programmer of this software (omap), but usually a several settings are connected together, like speed of cpu, memory, and possibly of some other subsystem like GPU (graphic card in wizard)
BTW Thanks to guys that made omap, great piece.. i am succesfully using it and clock of 240 is where i start
My current machine(wizard) is SPV M3000 From Orange on latest official Qteq rom.
i have all kinds of observations about it, (both phone and rom) but for now i'll keep it to myself as they ALL (i guess) come from my craze od d/l stuff and installing on my wizard with no brains at all
Thus far (getting back to tradeoffs and performance..)
O/C with omap is a necessity if u want to listen to high quality mp3 and be able to use anything else on wizard.
my experienc is that using pocket music (great mp3 player) with high bit rate mp3 heavy eq applied, completely freezes any action and reaction on wiz. and even turning down volume can take about 5 to 10 seconds after pressing touchscreen..
with omap applied cpu usage drops to around 70% and it behaves ok.
As far as uptime.. i have noticed no difference even with HEAVY overclock.
most battery consuming i think is: 1. WiFi, 2. loud music with high bitrate mp3 and built in speakers, 3. BT, or brightness turned on all the time(no screen saver) .. whatever the rest may be..
So if i am not mistaken cpu in wizard have 2 cores, one for DSP and phone processing, the other one for OS WM5. now i am thinking.. dynamic allocation of unused phone core to main processing power..for the os.?
Mmm 400 mhz for my wizard.. Me likin' it
..that's as far as my dreams go..
Greetings to all and i hope this place stays as cool and essential for all of us.. 4evA
bnycastro said:
hi there huangyz!
Did you ever try the Qtek Test ROM 2.8.7.1 WWE before going to 2.17.7.2 ? Would you say 2.17 performs better [without Overclocking] than 2.8? I loaded 2.8 because I wanted A2DP for BT and as I understand it 2.17 does not have A2DP, I won't be using Push E-Mail. So I am deciding if I should flash to 2.17 or stay with 2.8 and wait for another ROM.
Click to expand...
Click to collapse
sure, i try 2.8.7.1WWE-Test for nearly 2weeks. I took no advantage of A2DP because i rarely listen mp3s using my qtek.
i have no impression on this test rom now, except that i had to reset at least once per day.
Thanks for the info. I was wondering if I go with the 2.17 ROM can I downgrade to 2.8.7.1?
At the moment I hate my 1 week old QTEK 9090.
To enable GPRS I normally have to reboot.
Sometimes to get Wifi and BT working I have to reboot.
GPRS drops out during a phone call
Sometimes I have to reboot when there is no sound at all on the device. Just no sound at all.
I have had it a week. Probably had to reboot it at least 3 times a day and the reboot is LONG!
Wow such a good concept let down by a HUGE number of bugs
What version rom and radio does your 9090 use? (start menu>settings>device information)
check here
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
for latest official rom release by your phones manufacturer. Possibly an upgrade is beneficial! Either that, or your phone may have hardware issues. Check your service provider for repair/rma services.
Good luck!
Thanks for that.
I will check. One issue I have a work around for....
I only lose sound when I close down Windows Media Player before I stop the music. Stop it first and then close and all is fine. That is a start.
I wish the ROM upgrades were simpler like on my Treo 650.....upgrade does a backup, flashes the new ROM and then brings back the data....
I found my device and rom on that link ta. So does that mean I have the latets for my device....
This is exactly my 9090:
Qtek WWE OP ID 1.40.00 1.40.147 1.12.00
Protocol version 1337.42
So I must have the latest ROM for my device...ripper.
Rom
Yeah you have the latest rom. when i 1st got my qtek i had some strange issues as well. what i ended up doing was to install a different rom (downgrade) and then install back to my rom (latest version). Hey presto my pda was running much smother.
Take your time to read all the info on the forum and most of all read wiki!! It takes some time to get used to wm2003se if your switching from palm. Have fun!!!
Thanks.
I have used many PPC devices as well. Last one was AXIM X50V. Before that was IPAQ 2210, IPAQ 1930.......
From the 2210 onwards everything was nice and stable.
Just this device.....!!
If I could get it to reliably start up GPRS and wireless every time I would be fine. BT is not such an issue.
Now I have solved my sound problem that is excellent.
good bye wm2003se
I will be really honest with you!!! when i was using my pda with wm2003se i had to soft reset my device 5-6 times a day....wifi being the biggest problem. needles to say it was critical to have a good backup software (Sprite). after being really frustrated i found this site....(thanks god)....know i use wm5 and guess what after 8 weeks i have not had to soft reset my device once. wm5 at the moment is not perfect but for me its stable and quick enough.
Cool....so moving my QTEK 9090 to WM5 what should I look out for? What are the issues? Will I get anything else? Lose anything?
Stability is 100% key for, but in terms of features, WM2003SE has everything i need. It just doesn't work all of the time.
What WM5 ROM do you recommend?
Oops I see Ivan....got a link?
So what is the best procedure to do the backup?
Can I easily go back to the original ROM?
Ivan 4.3
it really depends how you use your pda and what kind of functionality you want. for me speed and stability are essential. i dont use blue tooth to much just to transfer data...(no headset). as all users of wm5 will tell you there are pros and cons with each wm5 rom. my advice is to read the forums and pick a version that best suits your needs. in any case you will have to do some hacks to really bring the best out of your device on wm5. see my sig for what i have installed.
forgot to answer your question. to downgrade your device is much easier than to upgrade. before you go down this road please READ wiki carefully!!!
Hi,
I have a XDA mini S (G4). Every time I flash the Phone with a WM6 ROM there are Problems with the Radio (It takes much longer to connect to the Network and the reception is not so good), the Bluetooth doesn't work correctly, everything runs slower and sometimes the OS just crashes. There is only one good thing about WM6: it looks much prettier. Now i want to flash the original O2 WM5 back, but at first I want to remove the JUNK O2 added to the OS. Now I'm searching for a program to modify WM5 ROMs, but I need some advice, I don't want to ruin my phone.
Are you in the UK?
Hi, I assume that you are in the UK since you mention O2 and mini s. Also, what WM6 rom are u using? I have just put XM6r5.1 on my uk mini s (both G3 and G4) and upgraded the radio to the T-Mobile 2.19.11 UK This works (so far) perfectly. (On contract and pay&go). May I suggest that you have another try before you give up and return to WM5. I am a noob, so this may be wrong, but I think the O2 stuff you mention is in the extended rom and unlocking this is not possible on a G4. There might be some way to prevent the OS from using it but for that answer you need an expert! Best regards
Hey there guys, i just recently found this forum and i'm loving it!
i found things that i didn't imagined that could be possible with my p3600.
so the thing is, i've a htc p3600 (bought in jan 2007) and quite frankly i like the phone alot. recently i saw a htc diamond with touchflo and everything else and i started to think that i should swap phones...until.......... i discovered xda-developers!!
i would really love to update my p3600 (currently on wm5) to a newer wm...with touchflo if possible.
my native language is portuguese, but if the best rom out there is english i don't mind..i just want this baby looking good
so i saw there are alot of roms avaiable... can you guys give me some advice on which one should i choose?
also, anything that i should be aware of before flashing my rom?
to flash my rom i only have to plug it (usb) and run the file... right?
would love some help.
thanks in advance,
so guys, i digged a bit myself and i ended up upgrading the radio to the latest version and installing "Karmba_a_Diamond_Blue_For_Trinity_v_Last"
i like this rom ... but there are a few bugs on it, for example sometimes when people call me i can't see who's calling (specially if the phone is on energy saver with the screen turned off) ... when it comes back on the screen starts flashing and i cant see who's calling... so my question is, can anyone advice me a sweet rom for me to use?
thanks again,
I am by any standards a complete noob at the whole rom flashing thing but here are the files i used.
[P3600i]_HardSPL_v1.1
HTC_Trinity_SIM_CID_Unlock_v1
[P3600i]_Radio_v1.56.70.11
and finally rom WM 6.1.0.4.5.0 Home
it all seems to work well with the only prob so far being occasional memory issues when i run Opera or Inturdnet Explorer.
Hope this helps
Smiffy
Any news on your upgrad
Hi,
I have the same prob, i want to upgrade my P3600 from WM5 to 6 or even 6.1, i upgraded the rom on HTC's website which is a waste of time because i am still left with WM5 on the phone, whats the point of that HTC? anyway i would appreciate any help
allan