Related
chricky i`m lost
i have been reading all that i can on the wiki
but it`s all gone over my head.
can someone please tell me simple steps of what to do.
i want / no sorry need to upgrade my svp m2000 orange upto
a 1.4 rom.
i originally had a 1.4 rom on my blueangel.
but i had a problem with playing video files,
so i took it to someone who knows a bit about these,
he said to downgrade the rom to a 1.3 which he did
but now i dont have my camera or video working even tho it did before he downgraded it.
i have tried to install a 1.4 rom but i keep getting country code error
i have been trying to read about this..but to be honest not sure i know how or what i need to resolve this problem.
there that is my problem..so does anyone know the solution.
1. what software do i need apart from a 1.4 rom
2. which is the best rom to install
3.do i need to do anything else to my blueangle before trying to install the rom...
i hope someone can give me a bit of a clue in easy laymans terms.
many thanks for your attention.
badger
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Just do as it's written on this page
READ
First Method (Quick/Easy) (TYPE II)
Download update to desktop
Unrar or unzip all files in exe or rar into a new folder (Yes you can Unzip the .exe file)
Open the folder with the extracted files
Download this file: MaUpgradeUt_noID.ZIP
Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
Run this new exe file instead of BaUpgradeUt.exe to update your rom
If you get an error the first time, run MaUpgradeUt_noID.exe again
And perhaps pick a Rom that comes from your Vendor.
First of all, you have to hard reset your device.
Then, you said that originaly you have the 1.4 ROM version which is the latest and includes radio version 1.12
All you have to do is to up-grade the radio version to 1.13 and do a hard reset again.
You can get the radio 1.13 from the below link.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
I hope this will solve your problem.
Regards,
Khaled.
@khaledelfeki
he is on a 1.3x Rom with no camera support.
He needs to reflash, and then why not 1.40 with all customizations that fits he operator
yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.
Hi.
I'm having some serious problems running WM5 on my SPV M2000 (Blue Angel). Internet Explorer keeps crashing, doesn't browse...bluetooth isn't recieving files from my PC, camera closes on its own, MSN Mobile not working at ALL...etc.
I want to remove this AKU3.5 ROM and return back to my previous WM2003SE ROM from Orange or even Imate. I downloaded the Orange V2.5 ROM update but failed to initialize the update process since the Country ID was incorrect for some odd reason.
Guys can you please help me out of it. Just tell me the safest and easiest way to downgrade back to the original ROM. And is possible that when i downgrade, i can install the Imate PDA2k ROM on my Orange SPV M2000?
I'd really really appreciate your help. Looking forward to your replies!
My device information details are:
ROM version : 5.04.09.WWE
ROM date : 11/02/06
Radio Version : 1.13.00
Protocol Version : 1337.42
ExtROM version : *empty* (blank)
i would make use of wm5 maupgrade_noID utility to flash the .nbf file of wm3 back to the original rom.
imatrix said:
i would make use of wm5 maupgrade_noID utility to flash the .nbf file of wm3 back to the original rom.
Click to expand...
Click to collapse
Yeah hi. Thanks for the reply, could you please give me a step by step procedure how am i suppose to do it? Where do i get the files from and how do i go about it.
I'd be grateful man!
As i see you use helmi aku 3.5 rom.
when u extracted the file out of the zip file u initially downloaded, u should see a folder name PH20B1. It includes maupgrade_noid utility there.
so basically what u do is extract the original rom (nk.nbf) into that PH20B1 folder, then put your device to bootloader mode, flash it as normal.
imatrix said:
As i see you use helmi aku 3.5 rom.
when u extracted the file out of the zip file u initially downloaded, u should see a folder name PH20B1. It includes maupgrade_noid utility there.
so basically what u do is extract the original rom (nk.nbf) into that PH20B1 folder, then put your device to bootloader mode, flash it as normal.
Click to expand...
Click to collapse
Actually i didn't install Helmi AKU3.5 ROM. I bought my phone used, and had this rom already installed. Now i want to get back to my original factory ROM. And i can't seem to get how to do it
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
link above lists all the original rom for each device / operator.
please see the attachment, it's the utility to upgrade.
for further information please read wiki though.
Thank you imatrix. Will go through the link you provided. Thanks for all your help!
By the way...is it possible for me to flash an Imate ROM on an Orange SPV M2000? I find Imate ROMs more stable than Orange.
ooo?/
I think, you will have a serious problem wwhen you go back to wm2003 mate.. you're bluetooth will be useless, I don't know why and how,,.. I tried wm2003 downgrade last time, and I was worried because when I try to turn my bt on, it keeps may saying that the bluetooth software is expired..bla..bla..and I can't turn my bluetooth on.. though I haven't tried installing abt stack, but I guess same thing will happen.. but its for you to find out.. theres a very comprehensive details on downgrading/upgrading roms on blueangel wiki.. to get rid of that country I'd error, just use maupgradeutnoid.exe which you can also download from there
I see that Photon hosts some shipped ROMS.
My Girlfriend has just purchased a UK Vodaphone HD Mini and I wonder if there is a new shipped ROM as there are only patches available on the Vodaphone UK site?
The current ROM on her phone is 1.07.401.1 (85429) WWE
ROM date 21st March 2010
Radio: 0.63.05.05
Many thanks
EDIT: Whoops... Sorry! used the search! I'm dyslexic and sometime find it hard to sort through textual information.
Vodafone haven't released their ROM yet (as you have already noticed from their website), they must still be testing/modding it. They are always a bit behind the curve in releasing Vodafone "approved" ROMs.
If you want the newest version ROM on your device you'll need to use SSPL and the 1.36.401.1 ROM posted up on conflipper's site. (Follow the shipped ROMs link from this thread http://forum.xda-developers.com/showthread.php?t=701507 )
Not impressed - it seems posting this has possibly drawn attention to the shipped ROMs site and the account has been suspended...
I should have exercised some impatience and downloaded the ROM this morning rather than driving 200 miles home only to find the files no longer available. :O(
The main Shipped ROMs site has been suspended after HTC got heavy with Conflipper, though they have agreed to allow already posted ROMs to remain.
You can find the HD Mini ROMs Here
Ahhh... Many thanks
Downloaded and attempted to upgrade the stock ROM with a stock update...
Invalid Vender ID at 1% falshing then dropped out.
Had a look for a Hard SPL for the Mini and it seems that it's not yet available for this device. (I wish she'd bought an HD2 now... )
So how do I go about updating the stock UK ROM to a newer stock ROM when it's in an *.exe file?
Is there some way to extract the ROM image and hence use DFT_SSPL_MINI.exe to update the ROM?
The stock ROM *.exe file it's a rar archive and contains different files (RUU, nbh, dll, etc). You can try to extract the *.nbh file and run it with mini_spl in the same folder.
BUT, it's just an ideea, maybe i'm wrong, i never tried this way since my phone it's not branded.
I already tried opening the exe with WinRAR (I'm on V3.93) but no option to extract. Any other ideas?
WinRAR or 7Zip should give an 'extract' option, but they don't always.
The only other method is to connect the phone to the PC and run the update EXE file, agree the changes but don't continue to the start of the flash itself.
This process will have extracted the contents of the ROM update to a temporary folder on the PC. It's just a matter of locating it! When you have, you can copy the RUU_signed*.nbh file to the folder with the SSPL_mini file.
Be aware that only the OS ROM will be updated by this method- the Radio ROM cannot yet be updated other than with a full stock ROM flash.
I have a Vodafone Mini like yourself and followed the instructions from the SSPL thread. Worked a treat.
Please not that this is my first guide on here and I'll make it as easy to understand as much as possible.
This has been tested on a Vodaphone branded HD Mini. Please reply to this post if this has worked on a different branded phone.
This is to help people to Unbrand their HD Mini's.
Have you managed to flash it to the latest ROM? If not you need to do the following:
•Download the SSPL_RUU.exe and put it into an empty folder (http://forum.xda-developers.com/showthread.php?t=694409)
•Add the RUU_signed.nbh that you want to flash to your device into the same folder (http://shipped-roms.com/shipped/Pho...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe) Assuming you want Western Europe ROM. You can use a different ROM if you want
•Connect your HD Mini to your PC. Making sure you use ActiveSync
•Run SSPL_RUU.exe and following the onscreen propmts.
Once done your phone will reboot. Next is to flash a Radio ROM.
•Move your ROM from the folder which contains the SSPL_RUU.exe
•Using the ROM that you just used Extract it to a location of your choice by using winRAR. Look for
Radio_32.2806.05.06_0.63.05.40 and rename it to PHOTIMG.nbh
•Place PHOTIMG.nbh into the same folder as SSPL_RUU.exe and flash once again
•Once done you will have a unbranded HD Mini as if you bought it like that. This worked on my Vodaphone
branded HD Mini and worked a charm.
I'd like to thank DarkForcesTeam for the SSPL_RUU.exe and the rest of the developers that have made
this possible. Without them we would be stuck with these branded phones.
Could the Admins place this as a sticky please. Many Thanks
The phone hard-resets after radio flash ? I want to flash only the radio.
Thanks for your guide, wardy. Great explanation.
But it doesn't work with my HD mini.
It stays at 0% for quite a long time. Afterwards, there's an error saying something about a wrong ID.
I'm afraid I'll have to wait for a HD mini hardspl
ci6i said:
The phone hard-resets after radio flash ? I want to flash only the radio.
Click to expand...
Click to collapse
As long as you are using the SSPL_RUU.exe to flash only the radio & renaming then you can flash it. Yes after the flash the phone does hard-reset.
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
wardy_uk1 said:
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
Click to expand...
Click to collapse
Thanks, I installed PHO03693.exe now. What happened afterwards:
-The error I get when I try to install any ROM via “DFT_SSPL_MINI” is “[202] Connection error”.
-If I enter boot mode via my endkey app and install via “DFT_SSPL_MINI” after that, it ends with “Error [262]: Update error”. When I click “view document”, it says: “dummy file”.
-If I try to install official HTC ROM “RUU_Photon_HTC_Europe_1.36.401.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship”, I get “Error [294] invalid vender ID”
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
wardy_uk1 said:
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
Click to expand...
Click to collapse
I tried both Windows 7 and XP as administrator.
When I'm doing hard-reset, I have to install PHO03693.exe afterwards again. So I did.
It has confused me now mate :$ You'll be better waiting for the HSPL instead. Hopefully it won't be too long now for it.
I have a cracked hd mini with vodafone branding..........i wanted to install the latest official rom......but i'm unable to do so........also i'm new to all this stuff can anybody please help me with this.........thanks
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
rfung said:
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
Click to expand...
Click to collapse
Likewise I see no Radio file....
[edit]
Found the file now, download the latest HTC update http://www.htc.com/uk/SupportDownload.aspx?p_id=314&cat=0&dl_id=1024 & you can extract the file from there.
Can anyone confirm if flashing the Radio rom is safe? - the DarkForcesTeam original link warns against it! > http://forum.xda-developers.com/showthread.php?t=694409
Im using an O2 UK HD MINI but have upgraded the ROM to the latest just the radio has remained at 0.63.05.18
I flashed with east europen ROM and now (and before flashing) I don't have GSM signal on phone, strange is that signal show up sometimes 1/5 and disapear again after few seconds but nothing else.
I have one phone with original Spanish language and have same problem with signal. dunno why that happen.
can anyone send me the steps in german? i dont really understand it xD
sorry but my english ist not perfect
Managed to carry out the Radio ROM update with an O2 branded phone.
However the Radio rom listed is still the old one (0.63.05.18)
The update process appeared to take but the radio ROM has remained the same. So take from that what you will?!
help
Please help me guys! I think i've done exactly like u said but when i want to flash the RADIO (PHOTIMG.nbh) after i've flashed the RUU i get this message: the update utility cannot be used for your PDA Phone. Please get newer Update Utility
I downloaded the Radio from HTC site, it was 2 files dont know why? 1 small for like 700kb and the other 12mb....