Automatic overclocking of BA with WM5 - MDA III, XDA III, PDA2k, 9090 Software Upgrading

WM5 on BlueAngel responds slower than 2003SE. So this weekend I've wrote an utility that would automatically overclock the device when it is in use. To determine when to overclock the program uses the same OS timer that is used to automatically switch off backlight. When backlight is on - the device is overclocked to 530Mhz, when off - it works on a normal 400Mhz.
This tool can damage your device, so use it on your own risk. Before using it you should check that 530Mhz works stable. I recommend to use Pocket Hack Master or this tool - http://forum.xda-developers.com/viewtopic.php?t=10292 .The speed settings are L=36, M=4, N=1.
The utility places itself into StartUp folder, so in the worst case you'll need to format storage to uninstall it if device does not boot.
This tool works only under WM5. It may work on Himalaya devices, but this is not tested.
Here are 2 screenshots of GXMark with and without the tool installed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've attached the source code of a program.

mamaich, I just installed your add-on, how do i know the cpu is running at 530MHz??
any way to check the current cpu clock??

use Pocket Hack Master

upload GXMark and Pocket_Hack_Master at BA upload folder go there to download it's w/SN,had fun

mamaich,Thank you , the speed increase a lot ,

It certainly feels a lot more snappy then without it. Thanks! Now how about a utility to turn on WLAN and Bluetooth when the unit is turned on? Please? :roll:

The speed increased for sure, but whats confusing me that all wm2005 beta builds are the same, shouldn't it ran like the hima's version without overclocking the CPU since we have the same specs on both devices?
Thank you mamaich for the hardwork so far..

mwang said:
upload GXMark and Pocket_Hack_Master at BA upload folder go there to download it's w/SN,had fun
Click to expand...
Click to collapse
How does one find this upload folder - sorry for being a Noob.
also, is Pocket_Hack_Master a free tool?

I can confirm it runs on Himalaya (with Magneto),and performs they way it should...
in fact,thanx to mamaich,I have a rocket Magneto on my Himalaya....I was astonished!!!!the speed increased (pocket hack master reference) from 398mhz to 531 mhz,and it's obvious big time....
thanx mamaich....
@odie3:click here....
RAGO :lol:

Thanks RAGOv!

How about battery life, how much has it been affected?

Okay, got them installed - pretty darn cool if you ask me!
[Edit]
One issue I think Power Button:
Turn On/Off Light with button: No Change in CPU Speed [either faster or slower]
Turn Off Device with button: CPU will slow down.
Turn On Device with button: CPU will stay slow. I have to either restart the unit or pop it into the craddle to get my SX66 back to 531MHz. Even if I plug in the device using the power cord it will not speed backup [Non-Sync Craddle].

Can someone benchmark this vs a 2003 BA?

odie3 said:
Okay, got them installed - pretty darn cool if you ask me!
[Edit]
One issue I think Power Button:
Turn On/Off Light with button: No Change in CPU Speed [either faster or slower]
Turn Off Device with button: CPU will slow down.
Turn On Device with button: CPU will stay slow. I have to either restart the unit or pop it into the craddle to get my SX66 back to 531MHz. Even if I plug in the device using the power cord it will not speed backup [Non-Sync Craddle].
Click to expand...
Click to collapse
Same problem here. On shut down, cpu will revert to 400mhz and on power on it'll stay at 400mhz. only after soft reset or running the exe again will make it 530mhz...

Mamaich, can you add a plug-in to monitor the actual speed like the xcpuscalar at the bottom bar?

odie3 said:
OOne issue I think Power Button:
Turn On/Off Light with button: No Change in CPU Speed
Click to expand...
Click to collapse
Yes, it does not swith speed when you use power button to turn off backlight. It slowsdown only when OS is turning backlight off.
I don't have problems like d3vil or odie3 has when speed remains at 400Mhz.
TheLastOne. GXmark benchmarks under 2003SE are the same as under WM5 without overclocking.
ramram. Currently I cannot. But I've provided source code of a tool so everyone can improve it.

TheLastOne said:
Can someone benchmark this vs a 2003 BA?
Click to expand...
Click to collapse
Not sure how to benchmark it but I know Microsoft Voice Command pops right up now with it over-clocked. Before it would take it at least 10~20 seconds before the Mic Icon would appear [ready to take a command].
Once thing I had hope this would help would be the graphics on the Today Screen. I am running Battery Pack Pro [not displayed anymore but need to test it now that I am over clocked] and Journal Bar. The Journal and mostly yhe Program Bar [part of Battery Pack Pro] bleeds a lot and the icons are mixed up on the Today Screen. Click here to see the programs I am talking about. So, any ideas of the Graphic Issues I am having?

Same Here
Same problem here. On shut down, cpu will revert to 400mhz and on power...did it twice and same results. Only after soft reset do i get back fast sppeds

i too have the same problem with it reverting back to 400 mhz
when i power off/on with power button

WOW this is fantastc. Works perfect on my XDAII. odie3 what version of voice command are you running? If it 1.5 can you tell me how you got it to install on WM5?
thanks mamaich for the overclock

Related

Recepie for speed.

Ok boys so after a week with my baby I am satisfied 90%.
Satisfied with looks, speed and stability.
This might not seem great to some of you but it might help the rest of yaaa.
So:
1. Roms:
-->Tried absolutely all the cooked ROMS all, all of them had issues of various types, yes its true that some were faster and lighter but had stability problems. The only ROM that mixed efficiency and stability was Elite 2.0.
2. Tweaks:
-->Tried all, but go the best results using:
-Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072.
-HKLM\Software\OEM\TFLOSettings:
SpeedHigh: default value (25) <-- Change to (5) / SpeedLow : default value (70) <-- Change to (14).
-Disable all startup items.
-Error reporting disabled and beam disabled.
ADD 10 Megs:
Thanks to Mr. KukurikU, for the heads up.
Originally Posted by Mr. Nightstar: (thanks dude)
In the advanced configuration tool by Schap's, there is "Phone skin" option under "Phone" category. if you disable this option and restart the phone you will notice that the dialer is the old one (WM6, without the video calling option) but there is much more memory free and the phone starts to ring when you receive a call much much faster (it was driving me crazy the 3 seconds or more until i could here the ring). i hope the is a way the improve this thing.
Thanks
BATTERY: and Off with EDGE auto attach.
Using Schaps advanced config turn off GPRS auto attach GREAT battery life after that. You will notice a Grey E icon(no data flow) instead of the shiny one before.
When you require edge it does auto connect. When your done with your data session, go to settings cellular/radio comm,not the data comm. Turn it off and then back on again. You will notice the Grey icon is back (resuming data dlow of). Keeps alot of batss.
Must Have:
Mr. Sushilange's Config tool for touch flo 3d (manila)
One last tweak that really tied everything up was using the Schaps advanced config I changed the Touchflo Pressure Threshold to 1. This makes the screen very sensitive thus creating a very quick interface. Responding the milli second you touch it.
Well boys thats it hope it helps someone. Ill add new stuff if you guys thinks its pertinent. Just make a quick guide
On the other hand the Phone Rulesssss!!!!
Sorry, mate.
There's already a thread concerning tweaking this device. I hope you can merge yours there for unity purpose.
The thread is http://forum.xda-developers.com/showthread.php?t=398265
cyphol said:
Sorry, mate.
There's already a thread concerning tweaking this device. I hope you can merge yours there for unity purpose.
The thread is http://forum.xda-developers.com/showthread.php?t=398265
Click to expand...
Click to collapse
Ya of course i know its there im just sharing what helped me that way it can
help some one.
hi , I have schap's 1.1 and can find the option for touch screen sensitivity .. can you help?
K you need verion 2.02.1.0.0 (I forgot where you can get it but its free)
Then go to TouchFlo then Pressure Threshold and switch it to 1 I think the default was some thing like 20 i forgot. thats it
Hope it helps dude Luck!
Originally Posted by nightstar
Hi
in the advanced configuration tool by Schap's, there is "Phone skin" option under "Phone" category. if you disable this option and restart the phone you will notice that the dialer is the old one (WM6, without the video calling option) but there is much more memory free and the phone starts to ring when you receive a call much much faster (it was driving me crazy the 3 seconds or more until i could here the ring). i hope the is a way the improve this thing.
Thanks
Click to expand...
Click to collapse
Absolutely the best "tweak" so far and it cames with 10 MB free space!
KukurikU said:
Absolutely the best "tweak" so far and it cames with 10 MB free space!
Click to expand...
Click to collapse
Ill give it a try tonight. (Wednesday night)
After
Thursday afternoon:
Mr. KukurikU:
I like the 10meg boost, overall the phone feels much faster. Im defenetly keeping this tweak, besides the skin on the stock WM6.q is not bad, and it loads quickly.
Thanks for the tip! Great one! Im definitely including in the list of tweaks.
Lucks for you dude! Thanks again.
10mb is quite much ...
Bad programmed phone skin there?
The original one is not that bad looking anyway. And now 'pin' entering and the normal keypad are the same.
Lots faster indeed! And: I got the option 'video call' also in normal phone skin?
Insane, I got after starting up and TFLO3d enabled 48% on original HTC rom of free ram...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
obsidianjaguar said:
hi , I have schap's 1.1 and can find the option for touch screen sensitivity .. can you help?
Click to expand...
Click to collapse
Easy:
just re-align screen by touching the screen VERY GENTLY, just press a tiny bit harder until it gets recorgnised.
Screen calibration is also sensitivity. I do it this way.
Sergio PC said:
Ok boys so after a week with my baby I am satisfied 90%.
Satisfied with looks, speed and stability.
....
Click to expand...
Click to collapse
In my experience, its often bad app programming/app incompatibility that causes a lot of device crashes. Review what apps you have on there and decide if you REALLY need them, if you don't, remove them and see if your device is a little more stable.
Thanks for the tips though, my device should be with me today/tomorrow and I will be taking a close look at your tips - specialy your opinion on which ROM to use as I was currently reviewing all the related threads.
P.s. please dont run off topic but, does RUU now work on Vista and ideally, Vista 64? Thanks!
P.s. please dont run off topic but, does RUU now work on Vista and ideally, Vista 64? Thanks!
Click to expand...
Click to collapse
yes it does...smooth. no more vista problems in unlocking\flashing.
Thanks very much.
Sergio PC said:
BATTERY:
Using Schaps advanced config turn off GPRS auto attach GREAT battery life after that. You will notice a Grey E icon(no data flow) instead of the shiny one before.
When you require edge it does auto connect. When your done with your data session, go to settings celular comm, turn it off and then back on again. You will notice the Grey icon is back (resuming data dlow of). Keeps alot of batss.
Click to expand...
Click to collapse
I tryd this option.
It turnes grey for a second, and then it just connects again like normal.
Then i go to commmanager and disable data connection.
then the connection is off, but the icon remains white instead of going grey.
and... when i make use of the data connection.
Do i have to turn it off my self everytime? (in the commmanager)
thnx
anheuer said:
I tryd this option.
It turnes grey for a second, and then it just connects again like normal.
Then i go to commmanager and disable data connection.
then the connection is off, but the icon remains white instead of going grey.
and... when i make use of the data connection.
Do i have to turn it off my self everytime? (in the commmanager)
thnx
Click to expand...
Click to collapse
Okay my bad you dont have to turn off data comm. You have to turn off Cellular comm, in other words the phone logs off from the cellular radio and then back on. Then youll get the grey icon and it will stay like that as if though you soft reseted the Diamond. And yes everytime you use it you must disable it manually (no big deal)
Hope it helps! Luck dude!
About the phone skin. If you disable this, you will not be able to adjust the volume in call while using your headphones..

[10.09.2009][WWE]Touch X "HERO" EDITION (WM 6.5 manila 2.1) xip 23409 sys 23016

[10.09.2009][WWE]Touch X "HERO" EDITION (WM 6.5 manila 2.1) xip 23409 sys 23016
I just want to say this!
I made this ROM cause i want a simple ROM with both manila and titanium.
100% stable and with best battery life, and super performance.
This is Touch X ​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In this ROM you can choose whatever startmenu you want to use, by starting the program "TOM extended menu" you can choose witch layout you want, -see screen above.​
Heres what's in it View attachment index.txt
ftp://ftp.minftp.myftp.org/XperiaX1i/ROMs/Touch_X/Touch_pro_2/Touch_X_HERO_Edition_1_0.zip
more info L8R
Known BUGS
-1% battery didnt cook in, dont know why -download my battery 1% from here ftp://ftp.minftp.myftp.org/XperiaX1i/ROMs/Touch_X/Touch_pro_2/cabs/smaberg_1_percent_battery_rhodium.cab
-High memory usage download this do disable push internet, -ftp://ftp.minftp.myftp.org/XperiaX1i/ROMs/Touch_X/Touch_pro_2/cabs/Touch_X_Disable_push_internet.CAB
-Fixed commmanager, removed 3g switch, replaced with "mobile WiFi Router" -ftp://ftp.minftp.myftp.org/XperiaX1i/ROMs/Touch_X/Touch_pro_2/cabs/Touch_X_TP2_FIX_commmanager.cab
WiFi on reboot don't remember state. (on becomes off after reboot)
Xxxxxxxxxxxx
Screens look good and a bit familiar coming from the G1.
Will download and check it out.
Thanks for an alternate ROM!
looks good for me downloading now Thanks for your work always great to see another chef in here.
what version of windows is this? 23409?
i looks great on the screen shot. I wonder whether it is stable and fast or not? Downloading now. Thanks chef.
rom is sexy fast and stable... **** good job.
Hey looks good, i will try it. Thanks
when i get back to my windows pc ill download it and try it
also look good, will download and give it a whirl...
tkBug* Wifi does not turn on after waking from sleep. I think its an issue with the new build as this happen with another chef rom using same built, the 3g switch in manila doesnt work either. There is also 2 connection setup after restart for the first time after flash too.
Mirror PLEASE
Someone can upload it elsewhere (none FTP).
I can't acces FTP on my work.
THANKS
Very responsive and fast ROM from what I can see, accessing various screens and menus.
I've always liked smaller icons and this one has just the right size to my liking.
Will play around some more to get a better feel and report.
bigchrizzieboy said:
Someone can upload it elsewhere (none FTP).
I can't acces FTP on my work.
THANKS
Click to expand...
Click to collapse
here ya go
Touch X HERO Edition 1 0
f1ip said:
ill have it in my site in a few.
Click to expand...
Click to collapse
Awesome, will be "F5ing" on http://www.f1ip.net
THANKS again for the mirror, Downloading right now
I give it a try,
Looks ok, one litle thing: the scrollbars dont seem ok. i wanted to change my ringtones and noticed the scrollbar "thing". It seems that there is something on the top and the bottom but cant scroll fully down (i will make a pic if necesary)
more feedback is comming
Tipp: include a taskbaricon-set and de 1% batery-cab (would be amazing when this will bi in your next rom )
EDIT:
Just wanted to set up my exchange connection over Mobile device center and got error 0x85020006 - Cannot connect with current connection settings.
i was able to set up the exchange settings on the phone and then the error disapeard (in case you have the same error)
now it works like a charm.
EDIT-2:
Bug?
after every restart i have to trun on data connection manually (needed for Exchange sync)
Button 3G (Change to Auto mode) don't work (no interaction possible)
except of these litle things the rom is top and exactly what ive looking for. (very fast and stable)
the 1% battery cab usually drains a little more battery...it's funny but that's it... so I'm happy to NOT have it in your rom...
I don't see any wifi sharing app in the Comm Manager... like CM internet sharing app...
Did you consider to cook in?
ok, no problem without this cab (1% Battery). I can add it manualy
what about including smartlock, so we can choose the new lockscreen from WiMo 6.5?
cyberrambo said:
I give it a try,
Looks ok, one litle thing: the scrollbars dont seem ok. i wanted to change my ringtones and noticed the scrollbar "thing". It seems that there is something on the top and the bottom but cant scroll fully down (i will make a pic if necesary)
more feedback is comming
Tipp: include a taskbaricon-set and de 1% batery-cab (would be amazing when this will bi in your next rom )
EDIT:
Just wanted to set up my exchange connection over Mobile device center and got error 0x85020006 - Cannot connect with current connection settings.
i was able to set up the exchange settings on the phone and then the error disapeard (in case you have the same error)
now it works like a charm.
EDIT-2:
Bug?
after every restart i have to trun on data connection manually (needed for Exchange sync)
Button 3G (Change to Auto mode) don't work (no interaction possible)
except of these litle things the rom is top and exactly what ive looking for. (very fast and stable)
Click to expand...
Click to collapse
Yes mate, apart from the 3G button in the comm manager, the rom is working great, smooth and stable.
I just want to comment that it eats lots of ram. Is there a way to reduce the consumed memory?
Cheers

[ROM][19 Mar 11][F1 Froyo 2.2.2 V3][EXT2]

F1 Froyo 2.2.2 V3​
This is a Pure and Fast Android AOSP Froyo 2.2.2. This is for people who recommend EXT2 build for the speed and this build's speed is like a Nexus S. Using Neopeek's EXT2 Android Installer. I suggest you to open all apps and sync your account with Google on the first boot and then reboot your device for the best speed. I have installed all Google APPS in it and all are up to date. First boot will be slow so after the first boot reboot it for optimal speed. Also Fixed some Bugs. This build is fully ROOTED and SuperUser is installed.
[Guide on how to create an EXT2 partition]
Build: Froyo 2.2.2
Kernel: Duckly's Kernel 9 Mar 11 (Keypad drivers not as modules)
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working:
SuperUser
WiFi (Perfect - No disconnection)
Blutooth (Perfect)
GPS (Good)
3G Network
3D
Phone
SMS
Very Good Battery Life
Smooth Animations
Browser
Gmail
Backlight Control
Market (New)
Navigation
Google Maps
Overclocked to 650MHz
Landscape Support
Note:
You may also try to use SetCPU to increase battery life.
It will not charge if you dont connect the power cable when starting Android.
Buttons Layout:
X Panel Button = Home Button
OK Button = Back Button
Left Softkey = Menu Button
Right Softkey = Standby & Lock Button
Call Button = Dialer Button
Call End Button = Standby & Lock Button
Volume Buttons = Volume Buttons
Power Button = Standby & Lock Button
Instructions:
Unpack the Zip file copy all the Files in the root of the FAT32 partition this will be the only partition you will see in the my computer. Then go to file explorer then in storage card then into the npkinstall folder then run haret this will install files on the EXT2 partition. Then it will automatically restart after you restart back into the windows mobile go into file explorer then storage card then run haret which is in the root of the sd-card not the one in npkinstall folder and just wait and it will boot.
Credits:
Thanks To NEOPEEK
Thanks To Duckly
Thanks To Chann
Thanks To XDANDROID
Thanks To Bruno_123
Thanks To Benquick
Download
If you like my work buy me a coke
testing & everything works very well (like on built which is not on ext2).
THANK YOU!
Hello,
Thanks for a new rom!
Is this more or less the same as the FAT32 one or are there any other changes? Like are the hardware keys still freezing and so on?
,Olle
somehow already an hour gone i hang for countless times haven't able to see how the desktop looks like
Sim unlocker?
Been using it heavily for 2 hours now and everything works so far - no freezes...
Have a problem though, coming out of flight mode W-LAN connects right away (great) but the dialog for me to input my SIM code doesn't show. Does anybody know how to bring this up manually? I see no other choice but to restart my phone for now which is a bit frustrating in the long run
Also, locations like Sweden and other smaller countries seem to have been stripped out of this one, a bit annoying to not be able to set location to Sweden but I gues I'll live
,Olle
works great, thank you =)
works greats thanks
i can only receive calls by the physical button? there is no option in the screen
whats the battery life,
is it like 10 hours or less?
good rom, but 3d is still slow
I'm testing this rom and it's amazing!
I just wanna ask if it's possibile tu use app2sd!
missing dutch
Hi,
i installed this build and testing, i think it will work good, i'll give feedback when i'm using it for i while
but there's one thing thats a -1: there are not mutch languages.... i'm missing dutch for me.... is there a explenation for?? thx
i'll give feedback as soon as possible.
grtz polcomp
(srry for my english)
good rom! but it's no chinese.
good rom! but it's no chinese.
bluevortex said:
good rom! but it's no chinese.
Click to expand...
Click to collapse
[email protected] give chinese solution here.
some feedback
hi,
some feedback for this build:
goods
- it's looking good.
- fast
- no crashes
bads
- no much language (dutch for me)
- keyboard still freezing..... tried to solve it by keyboard fix, but didn't work for me.
if there's a solution for this problem... it'll be great.
hope someone has a solution for me....
grtz polcomp
youtube and video cannot played ..
beble said:
youtube and video cannot played ..
Click to expand...
Click to collapse
X2
nobody with SOD after standby?
the banished said:
X2
nobody with SOD after standby?
Click to expand...
Click to collapse
My hardware keys still froze after a few hours.
It is a very good rom and i have no freezes until 10 hours.
Only one thing, the wifi power is not so good like in winmo.
Sent from my XPERIA X1 using XDA App
85362 said:
[email protected] give chinese solution here.
Click to expand...
Click to collapse
cannot open that page....
great rom, but still seeking for Chinese font display solution.

WhiteStone_WM6.5_J29_Build 29017 5.3.12 PV Sense 2.5 20181527.0 (26/05/2011)

This is a new ROM cooked by Joinatz (pdaviet.net forum member).
Download link (mediafire) HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- The J29 use OS base ship ROM WhiteStone 3.04.605.7 WWE and Build 29007 5.3.9.
- Manila 2.5 2018.1527_0 and some new OEM from Ship Rom LEO(S)_3.14.405.2 WWE.
- HD2 icon pack (thanks DINIK)
- ArkSwitch v1.2.0 with black skin.
- HTC Black theme from Ship Rom OBOE.
- Icon Battery Circular v5 (thanks XavierDemon)
- PowerOff, xdaShutdown with WP7 skin, ...
- Update Opera_v9.70_36027_0.
- AutoInstall, Office Mobile 2010.
- Fixed some problems.
You should hard-reset your phone after flashing this ROM before use
Amazing ROM, I love it!
There are 4 flaws though:
- No Audio Booster (Why not!?)
- Album app is barely functional (But then again.. who uses it?)
- Pictures in the Pictures & Videos tab are oversized (Minor flaw tho. Never seen this before, lol)
- No Marketplace & MyPhone out of the box.. (Again.. why not!?)
But it's a good ROM nonetheless and it's worth flashing, offers good stability & performance. This is the best ROM I've found so far for the Imagio, set aside the four flaws I mentioned.
One thing though, it may seem stuck at the first 2 startups, but then everything goes back to normal, just let it sit and reboot.
Keep up the good work man.
Rickondrius said:
One thing though, it may seem stuck at the first 2 startups, but then everything goes back to normal, just let it sit and reboot.
Click to expand...
Click to collapse
Right, sometime it stucks at the first startup. I've flashed this ROM several times and I've found the reason: HTC Sense could'n load because ArkSwitch hang up.
Point to left-top screen to open Artswitch / Menu / Quit ArkSwitch, then HTC Sense load.
Sorry for my E!
i download it already, but i don' know how to set up it?
RUU_signed.nbh it not .exe
nopr0b1em said:
i download it already, but i don' know how to set up it?
RUU_signed.nbh it not .exe
Click to expand...
Click to collapse
Download this tool View attachment Imagio_CustomRUU.zip
- Extract zip file into the same folder with nbh ROM file and run it
- Just follow instruction. The flashing time is about 5 minutes.
Just wondering what kind of performance you are getting out of this ROM. Also I remember having data connection issues with earlier versions using Verizon. Does this use HTC messaging? Thanks it looks great.
joshom said:
Just wondering what kind of performance you are getting out of this ROM. Also I remember having data connection issues with earlier versions using Verizon. Does this use HTC messaging? Thanks it looks great.
Click to expand...
Click to collapse
I don't use this ROM on my phone now, but I remember everything seems fine except the bluetooth has some bugs.
Sorry for my E.
I can't see the Settings button in Start menu.
Is it exsists or not?
samsonbek said:
I can't see the Settings button in Start menu.
Is it exsists or not?
Click to expand...
Click to collapse
You can use PHM Registry Editor and edit below value:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo], change "HideSettings" value from 1 to 0
After restart your phone, you'll see the Settings icon in Start menu
amazingly fast ROM!!! thank you, vieto2m
I tried out this rom and really liked ! although Icould not figure out how to get the MMS to work the insert button was shaded out. Any ideas?
GPS not recognized
i installed this version and have a question
3 GPS software didn't recognized the GPS receiver. is there any way to set it?
thanks
avivi53 said:
i installed this version and have a question
3 GPS software didn't recognized the GPS receiver. is there any way to set it?
thanks
Click to expand...
Click to collapse
Which GPS software you talk about? How about weather info on home screen?
May be I don't understand what your mean.
On weather tab, open Menu and select Allow my location (sorry, I don't remember exactly what it show. Pls try understand what I wrote because my E is not good).
Then select Update now. if all settings are correct, your location name are shown on home screen.
And, GPS work fine without setting up manual.
If above is not your mean, pls tell me...
GPS
vieto2m
i am talking about GPS navigation software. 3 of them including 2 versions of IGO and 1 WAZE does not have GPS signal so they are useless.
avivi53 said:
vieto2m
i am talking about GPS navigation software. 3 of them including 2 versions of IGO and 1 WAZE does not have GPS signal so they are useless.
Click to expand...
Click to collapse
Try Quick GPS

[XAP] Tweak 'n' Toggle 2.0 Updated 03-11-2013 [XAP]

Tweak 'n' Toggle for windows Phone ®.by SilverDragon24 (a.k.a IonT)
This app lets use toggle some settings on wp7 that the O.S does not allow natively
Compatibilty:
Windows Phone ® 7.1
Windows Phone ® 7.5
Windows Phone ® 7.8
Features:
Enable or Disable the little sound played when you plug in the charger also called the Charging Chime.
On WP7.8 you may have noticed that the volume keeps resetting to 19 on reboot. This app lets you enable or disable that feature.
Enable or Disable instant resume (thanks to JaxBot's Dehydration Hack).
Enable or Disable Software shutter button in camera.
Set Max Volume Segemetation while In Call.
Set Max Volume segmentation for the Entire UI
Set Low, Medium and High Brightness Percentages. (Change Brightness from Brightness settings to see effect).
This app wouldn't have been possible for me without the DllImport Project (thanks fiinix) and WP7 Root Tools (thanks Heathcliff74).
This app will work on any Interop unlocked device (at least works perfect with my Lumia 710) with WP7 Root Tools and Full Unlocked Devices.
Download XAP file from Atttachmnet or here or here
Please reply with your feedback. Don't forget to click thanks if this helped you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow, thanks great idea.
Greetz,
WP 7.8 Dynamics / HTC HD7:
View attachment 1794645
Except this error on opening it seems to work.
Also please set InitVol to not more than 60 at HKCU\ControlPanel\Sounds\BatteryCharging. 100 is too loud for such notification.
maya79 said:
WP 7.8 Dynamics / HTC HD7:
View attachment 1794645
Except this error on opening it seems to work.
Also please set InitVol to not more than 60 at HKCU\ControlPanel\Sounds\BatteryCharging. 100 is too loud for such notification.
Click to expand...
Click to collapse
Think I uplded the pre-release xap by mistake.... i'll update the post and attachments....
SilverDragon24 said:
Think I uplded the pre-release xap by mistake.... i'll update the post and attachments....
Click to expand...
Click to collapse
Updated the post with the new XAP. Now I gotta update it in the bazaar.... did the same there.... Sorry folks...
2.0 will inlcude user control on the charging chime volume....... Right now gotta be on my Hack OS X for a few days so can't update.
I mixed Up between Pre-Release and Release XAPs real bad but I sorted it out but the one at the Bazaar got worse so I'll have to sort that out...... Updated the app to 2.0..... Tweak 'n' Toggle 2.0 Includes user control over charging chime volume... enjoy guys.... I've updated the 1st post with links to TnT 2.0
and can anyone please tell me how to update the title of my thread?
nvm, did it...
I really like this tool because of the brightness functionality. It works great on my Nokia Lumia 710.
What do you alter to change the brightness? Is it a regkey? If so, what regkey? I searched high and low to find such a setting but I was unable to.
Could you please provide me this information?
Also I have my minimal brightness on 2% however when the "timeout brightness" kicks in it is higher then 2%.
So after a minute of inactivity the brightness of my screen lits up. Also when wake the phone from sleep, the screen lits up for a second and goes back to the 2% brightness.
Is it possible to add the "timeout brightness" to the tool? Also if it's possible what do you change in the system? Regkeys? If so which ones?
Thanks in advance and I hope you keep the tool updated.
I didn't think about the timeout brightness as i alway keep my phone on never timeout.... i'll look into dat... looks like 3.0 coming soon..... as for the brightness reg keys here they are
Low Brightness
HKCU\ControlPanel\Brightness\LowBrightness
Medium Brightness
HKCU\ControlPanel\Brightness\MediumBrightness
High Brightness
HKCU\ControlPanel\Brightness\HighBrightness
SilverDragon24 said:
I didn't think about the timeout brightness as i alway keep my phone on never timeout.... i'll look into dat... looks like 3.0 coming soon..... as for the brightness reg keys here they are
Low Brightness
HKCU\ControlPanel\Brightness\LowBrightness
Medium Brightness
HKCU\ControlPanel\Brightness\MediumBrightness
High Brightness
HKCU\ControlPanel\Brightness\HighBrightness
Click to expand...
Click to collapse
Aah super, you're my hero! I'm looking forward to 3.0 curious how you fix the time-out brightness as there isn't a regkey value for it...
Any idea what the regkey BrightnessChanged does? The value is 0.
if there is no regkey for it, it maybe possible with native code, which means i'm going to have to get deeper understanding of the os...
brightnesschanged stores current brighness setting
0= Low
1= Medium
2= High
3= Auto
Brightness error
Hi, thanks for your work.
LGE900 7.8+root tools
I have this message on app start-up
View attachment 2270401 View attachment 2270402
And aftet an initial perfect working, the brightness setting doesn't work anymore. Now Low and medium setting are the same brightness (the medium default) regardless the value i choose. The auto brightness still work well.
Any suggestion to restore the functionality?
just change the brightness settings to different values and it'll b back
Sent from my Galaxy Nexus using xda premium

Categories

Resources