Recently bought a qtek 2020i. All (rf, blue, wifi, gprs, voice, ...) works fine. However, no MMS Composer soft is to be found on the device. When capturing photo, the MMS Send option directs me to an email interface.
Operator Proximus in Belgium cannot help me. Maybe, you guys/girls can.
Thanks in advance, and Regards,
I have friend who has the qtek 2020i and I have an XDAIIi. I have looked at my friends and his set-up is the same as mine. The Microsoft Standard Messaging interface is common for, text/email/mms. If you send a captured photo, messaging should open up in MMS mode. To manually create a message in directly from messaging. You'll see Accounts on the bottom page, tap and you can select from tex/email/mms, select mms and create your message. These do not come with any other MMS software as standard.
Also please find attached a cab file, for automatic installilation of Proximus GPRS/WAP/MMS which you copy to your qtek and tap to install. I know you said it is already installed, its just in case you may need it.
Got it. Thanks.
MMS ok now.
Related
I have a lot of problem with Vodafone Italya configurating my Qtek 9090.
I used Vodafone setting, but i can't receive MMS.
It shows me that i have an MMS, it tells me to Download MMS, but no MMS is displaied, i think it can't download it even if no error messages are displayed!!!
On the other side.......when i send an MMS, it tells me that the MMS has not been send, but, i made a lot of tests!!!, the MMS is send and the receivedr receive the number of the same MMS that are showed on the "Try for.." setting.
Can you resolve my problem........Vodafone Italy Operators aren't able!!!!
Please.........if you can write also in Italian to let me better understand!!!
Thanks!!!
Try at this link http://www.windowsmobile.it/faq/prodotto.asp?P=Q9090 there are all setting for all Italian network.
It's simple and it's explained step by step .
If you have a question pm me
Hello everyone,
I performed an upgrade to WM5 on my Orange M2000 on Sunday (September 11th). By the way, I think WM5 is an awesome piece of OS. However, after getting everything to work, I can't seem to be able to configure MMS messenging.
GPRS and SMS work fine. But unlike WM 2003 second edition, MMS container doesn't come up when I go into messenging like SMS and Outlook and I'm not getting any option to configure it.
Does any know how I can get around this? MMS is an integral part of my Blue Angel. Please Help!!! :?:
WM5 - MMS Client Inside WORKING!
:wink:
I have an AT&T Tilt. I hit soft reset after a hard reset so that the bloatware didn't install. I can send text messages no problem. I cannot send a picture message. I can sometimes receive them, but I cannot send them from my phone. I have been trying to send them to a Verizon phone and have not tried an AT&T phone. Has anyone had a similar issue where they weren't able to send a picture message and resolved it?
tytn/tytn II mms
Never worked with wm6 correctly (finland, tytn/tytnII)
-Using port 9201 & WAP version 1.2 -> MMS under 70k possible to send and receive, higher not (when sending , it just hangs in 99%).
-Using port 8080 & WAP version 2.0 -> MMS up to 600k send ok, never able to receive "errMsg: error" (your messages cannot be downloaded).
This is only my experience (Elisa Finland). other providers and countries propably work ok.
anyone?
You won't have your AT&T operator settings installed with the method you used to eliminate the 'bloatware' Search for the Network settings cab on this forum as it may help you.
I found out the problem. AT&T can send and receive up to 600k. Verizon can only receive and send up to 350K. I had to change the outbound pictures to QVGA size and had to adjust the video to a smaller file. I guess different have different size limitations. In case anyone else experiences this problem, you need to adjust your settings.
Removing the bloatware does not remove any of the phone settings. It just remove the unnecessary software.
Please go back and edit your start post Title to this thread with {fixed} then others can use it for reference. Cheers and well done.
So I read that MMS doesn't work in WM6.5 and the solution was to install ArcSoft MMS and fix it that way. The only hitch is...after I installed the CAB, I can't seem to figure out where the actual program is so I can set everything up. Looking through File Explorer I see nothing in Program Files that looks related, nor does there appear to be any kind of new settings panel anywhere. I apologize if this is a stupid question but I searched through all the ArcSoft topics and everyone seems to have been able to figure this out except me.
Help? I'm using a Kaiser on T-Mobile with Witschey's bare WM6.5 ROM, if that helps. Thanks in advance.
I'm using Kaiser with WM6.5 build 23081 from T.i.R 19k with ArcSoft MMS version 5.2.2.22 bundled in the ROM. MMS is working good to the same operator in Indonesia
I use 2 steps in setting my MMS:
1. Settings - Connections - Connections - Add a new modem conn (the second paragraph)
2. Messaging - MMS Options
bmw2320 said:
I'm using Kaiser with WM6.5 build 23081 from T.i.R 19k with ArcSoft MMS version 5.2.2.22 bundled in the ROM. MMS is working good to the same operator in Indonesia
I use 2 steps in setting my MMS:
1. Settings - Connections - Connections - Add a new modem conn (the second paragraph)
2. Messaging - MMS Options
Click to expand...
Click to collapse
For the first part, what's the section heading that "Add A New Modem Connection" is under? For me, it's "My Work Network" and that doesn't sound right for adding MMS settings...additionally, I'm trying to use this info to fill in the required fields:
http://support.t-mobile.com/doc/tm21387.xml
But that doesn't list a username or password, which the settings are asking for. Am I doing something horribly wrong here? I admit I know virtually nothing about how MMS works, so writing like you're talking to a 4-year-old would be helpful
Oh, and also just to clarify, I'm using the version of ArcSoft linked in the second post in this topic:
http://forum.xda-developers.com/showthread.php?t=476947
...anyone? Still unable to send/receive MMS and have found nothing which seems to be useful =/
I can receive them fine but i cannot send them, i have attached one picture 56kb/300kb and trying to send it but it is just there in the outbox of the sms/mms and it wont send or anything, its just staying there.
The send time is set to "now" and everything else seems fine but i dont get why it doesnt work @S
any ideas?
Are you using a stock ROM or custom ROM? More info is needed. Have you tried to edit your MMS Server setting to see if it's been configured correctly?
Stock ROM - Voadfone - MMS settings have been downloaded already
Fixed.
Had to change MMS options connection to "Contract WAP" instead of "MY ISP"
cant send SMS
I seem to be having the same problem with sending sms's.
Previous posts didnt seem to help.
I am using stock software version: R3AA013 - Vodafone SA WM6.1 with rom 1.05.175.13
This is my third one with the same problem.
Should I move to WM6.5 or change my rom?
You sure you set up the MMS??