When installing Customizer.CAB you will also install any .reg file found in Extended Rom. This way you don't have to make CAB's for simple registry changes. You can now quickly create .reg files to be included at hard reset.
.reg files in the following directories will be applied to registry:
\Extended_Rom
\Extended_Rom\REG
\Storage Card\Extended_Rom
\Storage Card\Extended_Rom\REG
\Storage Card\EXTROM
\Storage Card\EXTROM\REG
this way it will work with most of the custom WM5 versions.
How to use:
Add Customizer.CAB to your extended rom and add the appropriate line in Config.txt (CAB: \<extended rom>\Customizer.CAB
Then copy .reg files to any of the locations above.
Example of how to track changes in registry and create a .reg file:
1 - Use PHM RegEdit to export everything in registry to a new .reg file
2 - Make the neccesary changes to your device (Owner data, etc..)
3 - Use PHM RegEdit to export everything in registry to a new .reg file
4 - Transfer the two .reg files to your computer
5 - Use RegDiff (http://hp.vector.co.jp/authors/VA000007/regdiff.htm) to compare the two files and create a diff .reg file
6 - Remove unneccesary keys from the diff file (like state, date...)
7 - Transfer the diff .reg file back to your device
Hope someone will find this useful.
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
logger said:
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
Click to expand...
Click to collapse
Install FdcSoft's Taskmanager (it has a built in Regedit), by DotFred. In there you can associate .reg files with it. Then just run them to import.
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
logger said:
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
Click to expand...
Click to collapse
Dont worry. I spent 10 minutes trying to use PHM before I gave up.
Dot Fred's TaskManager is a kick ass task manager as well as a reg editor (amongst other stuff).
P.S. Easiest way to associate is: Open TaskMgr, tools, options, Create RegEit Shortcut. This will ask do you want to associate.
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
logger said:
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
Click to expand...
Click to collapse
Don't know. I just leave the exe in My Docs, and run it from the shortcuts.
Okay. Will do same. thanks..
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
this is the steps i usually take when entering in a reg file. I use resco explorer for all this. I double click. Then I make sure I close resco through the menu exit and not the X button. Then I continue to play around with my phone for a while opening up menus and stuff. Then I soft reset. Doing these steps, I for sure get my stuff to work. There might be some unnecessary steps I take, but I end up with what I want. Many people have trouble keeping their registry stuff to stick. The steps I take, I never worry about that.
GSLEON3 said:
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
Click to expand...
Click to collapse
Thanks for the tip. Was not aware you could make shortcuts this way. Running from the card appeals because the .exe will still be there after reflashing a new ROM and I will only need to move/copy the shortcut. Being a newb I have been somewhat reluctant to run apps from the card but I am gathering that is is a quite an acceptable thing to do.
Is there a way to place registry keys inside a CAB so that they will get imported when the CAB is launched? Whilst the above DotFred association method works a treat for me with ".reg" files I would like to find a standalone method to import registry info. So that I can pass a single file to someone else and without any extra config they can import the contents into their registy.
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
thomassster said:
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
Click to expand...
Click to collapse
Thanks for the link thomasster. Does the job well. Probaly an overkill (and therefore overpriced for what I need), but I got it to work OK. Also from using it, I learnt that the process simply converts the registry keys to provxml. So now I am looking to manaully create the "_setup.xml" and then use iexpress.exe in Vista to create the CABs.
Is there a way to undo changes made by import .reg file?
I imported a reg file using DotFredd's Taskmanager. Now I want to undo it? Is it possible? How?
Thanks
Can we covert exported reg file to CAB file.
Dinesh
Yes, CERegEdit.
Hey, i had a question, the TP has got many tweaks, you have to manually put them into the registry, my question is: is there a program that can do al the tweaks that i want automatically? i know there are some programs like advanced config, diamond tweak etc etc. but i only want a to put all the "Queries" in 1 txt file just like SDCONFIG.TXT. sorry for my english! hope someone can help me or make a program like this! i think a program like this could help many people, especially the people who are afraid of editing the registry.
thnx in advance
Using an XML file, you can accomplish this with SDCONFIG.TXT and a provisioning XML, see this post: http://forum.xda-developers.com/showpost.php?p=1896955&postcount=2
Da_G said:
Using an XML file, you can accomplish this with SDCONFIG.TXT and a provisioning XML, see this post: http://forum.xda-developers.com/showpost.php?p=1896955&postcount=2
Click to expand...
Click to collapse
ok thnx for your help!
now can anyone make a XML files with the best working tweaks for the TP ???
Use Diamond Tweak
You could use advanced confic and then select export provisioning or something like that and then select witch items you want to export and then put that into your sdconfig worked perfect for me using sashimi witch does the same thing basicaly as sdconfig just easier to add and delete cab's and whatnot.
If you know all of the registry tweaks, you can use my QuickCab utility to create a cabfile. Just put your registry tweaks in the cab file, and install it like a regular program.
Here's the thread and I'm working on a new version that should be ready for testing soon.
IABovine said:
If you know all of the registry tweaks, you can use my QuickCab utility to create a cabfile. Just put your registry tweaks in the cab file, and install it like a regular program.
Here's the thread and I'm working on a new version that should be ready for testing soon.
Click to expand...
Click to collapse
nice going to see that topic!
You can export/import also parts of the registry with Resco Explorer and Registry add-in. Best software for PC I can recommend is Registry Workshop to join/split/compare registry entries,etc...
i need to create a pack for modify a some line on registry on some phone but i need this mod is save on phone and not delete if i proced to hard reset of the phone please you help me???
sorry if this question is already asked but i have try to search on forum but i'm not found
1. You can use Resco Registry extension for Resco Explorer. There you can export some registry entries and import them later.
2. You can create standalone cab with your registry settings. If your cab will delete after installation,set it as readonly.
3. You can use Registry Workshop software for PC to manipulate with registry
4. You can use Mortscript