Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one
and you're still waiting to publish it !!
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.
Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here
Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS
mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...
from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.
It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"
I need the password for this ROM... :roll:
Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???
I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here
off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available
freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?
Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.
Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)
As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.
i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.
ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks
As a recent newbie with a M2000, I have a quick query:
(I have searched already but didn;t see an answer)
Is there a list of differences/features between the iMate and QTEK ROMs ?
Thanks for the great info here I have successfully unlocked the M2000 and flashed it with QTEK firmware, and am basically curious about what (dis)advantages the iMate ROM has vs QTEK.
Ideally want a reliable unit with no operator branding.
Orange France New Extended ROM (in English) for SPV M2000 users with a WWE ROM 1.42
This ExtendedROM contains the following packages:
Album_BlueAngelAKU26_Generic_WWE_RC20.cab
BA_CarKit0408_Camera_140193.sa.CAB
CAB-Acrosoft-MMS-2.5.0.28-ENU-BlueAngelAKU2.6-13May05.cab
CAB-Cyberon_Voice_Dialer_2.cab
CAB-TrueFax-2.09.1-ENU-04Mar05.cab
Caller_ID_BA26_Generic_WWE_RC21.cab
ClearVue_2.4.386_withoutBP_OzUp.sa.cab
Java_v10.1.2.76_BA_WWE_unremovable.cab
MIDI_RTPI_BA26_RC21.CAB
OrangeFR_ActionEngine_081304.sa.cab
OrangeFR_Configuration_041306.sa.cab (*)
PVPlayer_Eng_AAC.2577.cab
ZIP_BlueAngelAKU26_Generic_WWE_RC20.cab
(*) This cab contains all operator configuration, registry settings and patches (including AZERTY keyboard, MMS configuration, GPRS, camera, CarKit...), programs (Wireless Manager, WLanMgr and Wireless modem) and links.
Use this ROM only if you have a french SPV M2000 with a 1.40 or 1.42 WWE ROM
ftp://xda:[email protected]/Orange_Fr_SPVM2000_Ext_ROM_142179_WWE.rar
Already uploaded and posted
http://forum.xda-developers.com/viewtopic.php?t=47253
Still looking for the ship.exe of this rom
hint hint
POST UPDATE
Hi guys!
I have replaced the cab (Please, MDAUserIII, replace the previous files for the new one) because it was a mistake in the registry. The camera button didn't work. I opened the configuration cab and I realized that "\Windows\AppButtons" directory was set as "\Windows\BoutonsApp" (as in the French version of WM2k3). I have corrected this mistake. Now everything it's working fine.
Two weeks ago, I sent my SPV M2000 to be repaired (broken screen) at Cirma Electronics (official Qtek and Orange repair dealer in France) near Bordeaux. They have returned my unit with this new version installed.
That's it. Enjoy ;-)
being an orange france BA user, could you possibly go to www.orange.fr log in using your details and download the whole shipped exe (including radio and CE images) to share with us?
Midget_1990
Hi Midget_1990!
Orange France web site is really awfull for updates. The latest update you can find is the following:
http://fteb.orange.fr/monmobile/faq_spv2000/RUU_2.2_OrangeFR_v5.40.2.223_ship.exe
and it's intended ONLY for French versions...
You only can get updates in English for Corporate users. These updates are never published in their site. That's the reason I made a backup copy.
Sorry, mate.
Regards.
Replaced the file and now downloading the 1.40 rom.
ArtZ
Can you please give us the MS Build nr of this 1.42 rom
ROM and EXTROM versions
MDAIIIUser,
I got back my unit from the repair service with ROM Version 1.42.00 WWE ans the Operator version 5.42.1.179
I have also tried the Operator version 5.42.1.179 with ROM Version 1.40.00 WWE and it works fine also. Although, this Entended version WILL NOT WORK PROPERLY with versions in other languages, because the Windows CE installation paths are not the same.
So guys, if you have a SPV M2000 with ROM 1.42.00 WWE or 1.40.00 WWE, this is an excellent Extended ROM, but if you have a localized Windows ROM (ie. French, German, Spanish...), you shouldn't use.
The ROM takes the full 16Mb ROM storage. I asume Orange's choice to have only ONE configuration CAB is due to the limitation of 16Mb ROM storage.
I haven't tried the French version available at Orange France Web site http://fteb.orange.fr/monmobile/faq_spv2000/RUU_2.2_OrangeFR_v5.40.2.223_ship.exe , because I don't want French ROMs. Besides, this ROM seems not to have java included, because there was not available place in the Extended ROM for the java CAB (someone wrote that in another forum).
did they stop support for this model?
I don't know....but what I do know is that it's about time Qtek releases a new Rom with AKU2.2/3 !
But because I got an MDA Vario I cannot register myself on the Qtek website, because you need an Qtek IMEI number.
Anyone willing to share their Qtek IMEI number so I can register myself and can watch the forums for what is coming (or what not)?
If so...PM please
Molski
qtek 9100 latest version
English (WWE) : (AKU 2) Rom:2.17.7.2 Ext:2.17.7.102 Radio:02.07.10
so there is no update