Database Develop

Blue Angel - A2DP Bluetooth

Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.

s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!

A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?

It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.

A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?

Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.

shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...

looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:

Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..

shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!

How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!

anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.

I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...

jarekt, can you post those registryvalues please?!

Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.

BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.

I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.

Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck

BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with

i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?

WM6 Bluetooth Woes

The various WM6 version threads have become cluttered so forgive me for starting a new thread. Does anyone know of a way to check bluetooth stack versions on these various builds of WM6? For the most part bluetooth in WM6 is an improvement over WM5 save for the use of my HF850 car kit by motorola....it'll bond, it'll trigger voice command (but only route it through the phone speaker, not the car kit), and wont carry audio inbound or outbound. It worked relatively properly with WM5, but would drop / reconnect randomly, and of course BT VC didnt work. Any ideas? Anyone else having the same problems with the Hf850 or other bluetooth peripherals? I've read some threads about some Parrot kits now working that didnt before. Any input is of course appreciated.

WM6, bluetooth car kit and incoming port problem

Hi guys,
I am at the end of my tether... I just bought a JVC head unit with on board bluetooth, so I can use it as a car kit. But I can't get my Treo 750 to pair with it! It just locks up after I enter the passkey... and the car kit just says "error" after a certain amount of time. I'm running a vanilla (extended ROM removed) version of the 3 Australia ROM.
So, I rolled back to Windows Mobile 5... same problem... UNTIL I went into the Bluetooth settings and setup an incoming COM port. Then it paired up perfectly and all was well.
So I've reinstalled WM6, but it doesn't have the option to create an incoming COM port. That's really annoying. I've googled a heap, and searched these forums a fair bit too, but haven't been able to find any sort of workaround. Is there a registry hack, third party program, or some other way I can tell it to allow an incoming connection from the car kit?
Thanks in advance!

Has anyone had any ideas on this? I have a real issue now, as I rolled back to a WM5 ROM which I found on these forums but I'm having awful problems with it - it drops calls all the time and sometimes they just go silent..... the call stays connected but I can't hear the person on the other end.
I really need to get either the original Telstra WM5 ROM, or a way of getting WM6 to work with my car kit! Any ideas... anyone??

Okay... now I really feel like I'm talking to myself but anyway.... thought I'd give an update.
After heaps of trial and error, I managed to install the Universal version of the Broadcomm bluetooth stack onto my device. And it pairs - hooray!
However... when I make a call, no sound comes through the speakers
No other version of the Broadcomm stack will run on my Treo, I just get the memory error that lots of other people have mentioned.
Chalk another person down who's royally annoyed with Palm for putting such a dodgy implementation of Bluetooth into these devices. It's my one and only bugbear to date.

I have exactly the same problem when pairing my WM6 Treo 750 to a Parrot MK6100 carkit. After entering the passcode on the Treo, the device just hangs. The carkit says it has connected succesfully, but nothing happens. After restarting it does not recognize the carkit at all.
Did you find a solution yet? I am also looking for a different Bluetooth stack that is guaranteed to work with the Treo.

Good to see I'm not the only one. No, I haven't found a solution yet unfortunately
The closest I've come is that hacked Broadcomm Bluetooth stack. My only hope is that some nice developer will help us develop something that works!

Hi Ben,
I solved my problem yesterday. I tried two suggestions.
1) Leave the passcode field blank (do not enter '0000') and press next
2) Install http://www.jetwaremobile.nl (fully functional 30-day trial)
After that pairing succeeded in a couple of seconds and all is working well. Let me know how it works out.

Thanks very much MattMax!
I had tried the Jetware software previously, and it didn't help. But I hadn't tried leaving the passkey field blank. Did that this morning... it popped up with a connection dialog asking if I wanted to allow the connection... went back to the passkey screen, I entered 0000 and away the sucker went. How simple was that!!
I just upgraded to the latest ROW2.23 WM6 ROM the other day, so I'm not sure if that made any difference either. But it's now paired and (seems to be) working well, just need to make and receive a few calls to make sure.
Thanks very much for your suggestion!

Good to hear that it worked out!
I had exactly the same experience, leaving the field blank, after that entering '0000' and it worked. I had just installed Jetware Mobile, but apparently that is not necessary for the solution.

Widcomm on Kaiser (searched and found, just a few q's)

So I have a shiny new Kenwood KDC-BT838U and for a $220 dollar toy it is pissing me off very much. It does not automatically connect or disconnect from my phone when powering on or off. Simple fix for that is an app to manually establish connection. a2dp will be running fine, then a call comes in. After the call sound will not work and I get all kinds of connection issues until I just power down the head unit then turn it back on (sometimes a few times).
I tested my kaiser with other bluetooth HU's and it worked fine. Then kenwood was not in the store but I love all its other features and it looks great. I contacted Kenwood support and they said that it is a problem with my phone's bluetooth protocol. I decided to give Kenwood the benefit of the doubt. I want to try the widcomm stack.
Found it here.
http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72
I have read that it works with the kaiser. True? After installing the cab, do I need to delete the MS bluetooth reg key or do anything special?
Any Kaiser widcomm users out there? Can you comment on any issues you have? Thanks!

I went ahead and installed the cab linked above. At first I was getting the out of memory error on boot. I changed the baud rate ([HKLM\Software\Widcomm\BTConfig\SerialTransport]) to 115200 and it appears to be working now. Will report more findings later. If anyone else is using it please share your experiences here. Pretty much all the threads I found by searching were people with the same question and they pretty much all went unanswered.

Wellit only thinks it is working. Kasier would not find any bluetooth devices near by and my computer cannot find my kaiser. I guess I will give up now but if anyone else got it working please let me know.
Oh BTW, don't install the CAB unless you don't mind a hard reset. I was prepared for that of course, but just a heads up.

[SOLUTION] Your Bluetooth disconet?

Your bluetooth disconect when you use your handsfree in your car????
Then try this software: JETware Hands-Free Extension 1.31.
I have four days without disconect.
(sorry for my english).
UPDATE 27-07-2009:
Versions of JETWARE:
1.11 (ShareWare)
1.20 (ShareWare)
1.31 (ShareWare)
1.31.178 (ShareWare)
1.40 (FreeWare??)
the good: The program solutions the disconnects of the bluetooth
the bad: BUT, in my handsfree (Saab 9-3 2008), i can make a call but i cant cut a call (i must to cut the call in the phone)
and if i uninstall i lose mi contacts in the car.
It is not perfect.

Hopefully this works mate.
Gonna try now & report back later
Cheers

Hopefully this works mate.
Gonna try now & report back later
Cheers

This Works so far. Gonna keep on trying & report back shortly. Will post another thread if it continues to be successful as this needs to be seen !

Just right.
This Works.
(sorry for my english again).

Great find hcorreo. This DOES work !
Been testing for a week now and i have had ZERO disconnections.
Thankyou so much mate

How exactly does this work?

Thats the work of 6 month looking for.
Thank you.

Screen won't stay off
I loaded the extension but now my backlight won't stay off. Is there a registry fix for this? Otherwise, it looks like a great BT extension.

Problem of the light:
I have the same problem with the version 1.31.178.1.
Try with the version 1.31.

Could this issue be fixed without having to buy a third party application?
Iam using my X1 with my builtin BT handfree in my Volvo and the problems just keeps coming.
The BT logo newer disappers like ive read about in other threads but the car and the phone seems to have massive communitcation trouble. Adressbook sync like it should but when i try to call from the car, it takes about 30sec until the phone reacts. Same goes for answering. When i press my answer button it takes about 30sec again for the phone to swallow that command. Sometimes it works, but then after 20sec the car reports that it lost its connection and if iam lucky, the connection is restored automaticly by the car.
The strange thing is that ive moved from my HTC Tytn to this phone, and the HTC never had any kind of trouble. I was running WM6 on the Tytn. Could it be WM6.1 that causes the trouble or is it the hardware in the phone?

Updated first post with info of versions and more info.

flashed to EnergyRom WM6.5 and disconnect is gone too
Used to disconnect randomly after 50-80second on my car's bluetooth

I have another problem, my bluetooth headset(SE HBH DS-205) disconnecting when i use WiFI

Jet Ware is good for the bluetooth desconexion.
Someone have a idea about how can i hang a call with the JetWare installed?
Thats the only thing to be perfect...