help but i have a dumb question.. - MDA III, XDA III, PDA2k, 9090 Software Upgrading

ok i was trying to upgrade but i used the wrong upgrade for the wrong phone and it told me on the computer screen and now the sx66 stays on usb when connected to the use it says USB on screen and v2.06 on the bottom, and when i unplug it form the cradel it says serial with the same at the botm how do i make it reset i tried the pwr and reset at the same...
any help apprecieated..

I guess you have to upgradewith a correct ROM.

..
can u or somone please tell or show me where a correct ROM would be... i have looked and all i find are ones that give me errors..(wrong country code,wrong device.yaddy yaddy yah) please i need to fix this asap, im in the us using a Cingular SX66...please any guidence would help.
thanks in advance.

all these errors are described in this forum, along with their solutions!
search'n'find instead of ask'n'wait!

i was searching but i havent found much that answeres my problems sorry to bother you.. im just panicing...thanks again

i was searching but i havent found much that answeres my problems sorry to bother you.. im just panicing...thanks again

fixed thanks for everyones help...!!!

Related

Can't reboot after upgrade to XDA IIs Chinese

Today, I upgrade my HK XDA2s from eng to chinese, the chinese rom which was download from ftp , named "XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar" (Thanks the giver)
During the installation, I have successfully to edit the 3 rom header file to avoid the country ID problem.
All thing go well, and the PC screen saying "Congradulation" at last.
However, after I soft reset my XDA 2s, the device hang on the start up screen, can't reboot further more.
Can anyone tell me how to solve it OR any steps I miss ?
Thanks
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
MDAIIIUser said:
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
Click to expand...
Click to collapse
Thanks MDAIIIuser reply.
After seeing the PC screen said "Congradulation"
I've try 1) Softreset and 2) hardreset too
But the problem stilll exist.
Thanks
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
MDAIIIUser said:
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
Click to expand...
Click to collapse
Thanks MDAIIIuser, you already help me a lot.
Hope other member who 've encounter the same problem can sharing with us.
Furthermore, MDAIIIuser, while using the rom mention above
"XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar"
which is download from ftp server.
After upgrade, the start up screen is "Qtek" with KPN wording. It is very strange that why the chinese rom got "Qtek" wording.
It is there have something wrong on that files ?
You did what we all would have done, sorry that it was a waste of time.
This is another case of
FUNNY HA HA ... NOT
Check the thread on the t-mobile new rom found (cant post link am on mda). Here you will see that i found a new rom on ftp, posted it to wiki, downloded it and then cooked it to find out that it was a qtec rom.
What a waste of time that was.
We have one very sad person that thinks its funny to delete Ftp files, Ftp dirs and now post files that he/she knows would intrest some of us based on the threads that have been posted.
I for one will take more care when posting to wiki, pity as it takes the fun away.
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Dont think amy of our CHT are good, might try to download then and see if they work.
The link is in wiki, see my signature, you need the page with ship.exe in it.
idox said:
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Click to expand...
Click to collapse
Tell me which CHT ROM you did and how you flush Rom , maybe I can help,I try all CHT Rom in here except Dopod114 ROM was broken others all can flush,pm to me or replay in here I will help same as MDAIIIUser help me.
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Do not worry. I have got the same problem before. I suggest you just flash back to your own rom.
bbrcn said:
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Click to expand...
Click to collapse
re-flushing rom again , it's happen to me before,if you see usb 2.07 that need to re-flush again
Thanks for you two reply.
Yes I had thought about to it that way. But my problem is more serious the XDA stop at start screan the computer even can't detected it. I can't even do synch how can I flush it back? Is there any other way like "PC safe mode"? Anybody got a idea?
OK, move battery out wait 15 min , and put it back ,also reboot your pc,if don't work , try to remove and re-install ActiveSync .
try to doing soft reset first.
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
bbrcn said:
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
Click to expand...
Click to collapse
ok YOU DIDN'T SET ON Boot Loader Mode,TRY by pressing the camera button, power button and then the reset button and hold for a few seconds THAN YOU WILL SEE USB V-2.07 THAN PUT IN THE cradle THAN FLUSH YOU NEW ROM, I THINK SHOULD WORKING.
It do works by press voice record, power, reset together! :? Anyway it works again, just great!!
I'm really appriciated for your help mwang thank you!

pda2k went plank after upgrade need your help

Dear Friends
Good Day To You all …
I have just bought a new pda2k I=mate and I was trying to be a smart person and update its rom and I think I messed up and now I’m getting a blank screen with a word serial on it and USB when I connect the sync cable. And I didn’t make any backup can some one help out im so sad about this thing
Thank you for your help in advance
Regards
Ati
Dont Panic
The first thing is... dont get panic with this.
Just do a soft reset,
put the device in the cradle with active sync on (dont worry of any message that comes on the PC),
double click on the ROM update file
Do the process again.
It will work now!!!
PDA2K upgrade problem
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Re: PDA2K upgrade problem
ati said:
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Click to expand...
Click to collapse
I dunno why ppl are doing the FIRST day a rom upgrade, firstly u should go over the upgrade posts and get familiar with the updates and how to do them. Sorry to say that mate but u deserved ur punishment.
Well since you can't play with your device try reading wiki.

8125 will not boot any more .. need some expert help

i have a 8125 that i was using with cingular / att
the other day i was doing a HARD RESET .. and thanx to my stupidity i did it as the battery was just about to DIE ..
it did .. right in the middle of the HARD RESET
i plugged the phone back in and then turned on the phone
the " splash screen " comes up ..
the numbers
it says
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.11
appear on the top left of the screen .. and that is where it stops .. it will not BOOT any further .. .. nothing works .. the only way to get the screen to shut off is to take the battery out and start the process again
I feel i have damaged the O.S system or something
can anyone give me a place to start .. or a way to begin to even attempt to fix this problem ..
thank you so much in advance to anyone who can shed some light on this problem ..
start with the Wizard Wiki and get an original ROM (form the provider) to restore phone to good condition
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Sanboy said:
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Click to expand...
Click to collapse
My first advise was to read the Wiki. There you'll find a LOT of information and help on how to get it done.
You must find the same ROM that came originally with your phone. Go read and search...
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Yes go to cingulars website and download the 2.25 rom release. This will allow you to flash your phone back to oem condition. Try hard resetting it again, I don't remember if you can do it from the boot loader screen but you may be able to.
Best of luck.
Jeff
Sorry, but Cingular site not exist, today is AT&T, or not?
Sanboy said:
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Click to expand...
Click to collapse
What you want is to be spoon fed and that's why is so hard to find anything in this forum: because of the huge amount of repeated posts with same questions.
I made a Google search and in less than 3 minutes and 3 sites i found the original HTC/AT&T ROM link...
http://www.america.htc.com/support/8125/software-downloads.html
geez...
EDIT:
Double posting isn't a good policy either

problem hard spl

hello,
so i just got my x1 back from my local vodafone store(after it cracked) and im trying to flash it. little problem though every time i want to hard spl i complete all the steps. but when it should progress it doesnt after some time i get a msg about the way my phone is connected so i tried a different cable didnt help. I have flashed before and i know the process so i thought W*F downloaded a video guide maybe i did do something wrong. Still no progress does anybody know what to do could vodafone have done something with my phone?
greets
sorry if i put this in the wrong place i realise now im in the development forum thought i was in the main forum sorry
fixed it hard reset worked
closed

[HELP!!!] Im trying to unlock my pda!

using P3700 and Im trying to unlock it.
done with downgrading it to 1.40.OilNex and Ive already launched customruu.
(btw, what does it do? cuz I don't see any difference in my pda, eh. I mean customruu)
I've copied 'diamunlock.exe' to anywhere in my device but I don't know how to open it.
I guess, there's should be a pop-up or sth on my phone but I don't see anything. What should I do? Give me some hand guys. plz :')
using WM 6.5.1. 23089 WWE with htc sense 1921.
and have already put RadioROM.
(I don't know what they are though.)
I'm jus kinda putting all those stuffs in my pda cuz I don't have any idea.
I've googled a lot and read lots of instructions from you guys.
pls, help me
Sorry to say, mate, the best you can do is to start over in reading again:
http://forum.xda-developers.com/showthread.php?t=416211
You may want to check the wiki -pages as well:
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Be sure you understand the steps before applying otherwise you may brick your Diamond.
Good luck!

Categories

Resources