Fail to boot OS anymore - MDA III, XDA III, PDA2k, 9090 Software Upgrading

If anybody colud help me. What happens is my device was downgraded to WM2003SE 1.40.00. At first it show bootscreen with the O2 logo and roms version with the light on. BUt after few minutes, the light gone and since then it won't come out anymore. I tried every way to reload rom by doung upgrades and downgrades.The processes showed everything's ok and 100% succesfully done.But when I hard reset it,it just hang on the bootscreen. until the display goes blank. I also tried taking off the battery and left it overnight etc. But nothing successed. Please....any solution. For your information, I did the upgrade process succesfully before with any roms since version 1.12. Sorry for bad english.

Related

Upgrade seems to succeed but nothing changed

Hi there!
Ever since my first upgrade to Bepe 0.73 I'm having problems flashing new ROMs. The P3600 is properly connected and recognised by the updater. The flashing process begins and seems to finish successfully. However, upon restart of the phone I'm still presented with the old ROM in exactly the state I left it.
I have no idea what's going wrong here. By mere chance one of my many upgrade attempts to Bepe 0.75 succeeded yesterday (no idea why). I do however still experience the same problem when trying to update to v0.76.
I also tried flashing the original (German) HTC-ROM - equally unsuccessfully but with the distinction that at 13% progress the display freezes and fades to black. The flashing process does however seem to finish successfully.
I'd be very grateful if someone could point me in the right direction as to what could cause this problem and how it might be resolved.
Thanks a lot!
could you give your bootloader details? (ipl + spl)
IPL-0.50
SPL-1.30.Olipro
Here's another thing I just experienced: when entering the Bootloader manually, the display again freezes and slowly fades to black. What the heck is going on here?
solving my own problem:
the above described behaviour is due to my miniSD-card still in the slot. if removed, upgrading works flawlessly.

Trinity running 6.1 Elegance- totally bricked - please help me!!

Hi all,
I have been visiting these forums for 2 years now and have downloaded some great tools and ROMs to enhance my Trinity, however something all of a sudden has gone very wrong!
I upgraded to WM6.1 Elegance edition about 3/4 months ago, CID unlocked the phone about a month ago and everything has been working like a dream.
However just today, I attempted to turn the volume down on my phone during a meeting (I always forget to normally!) and there was no display. After few battery resets, again no display. It starts up, loads the the Elegance splash screens and then hangs on the screen before when the OS should appear.
My decision was to flash the ROM again. I cant flash using Activesync as it wont pick up on the hung screen, so I started the bootloader and got as far as 1% of the flash and it will restart. So I tried the SD Card method when resulted in a "loading" screen appearing for a few seconds and then it goes back to the standard bootloader and displayed a 00068002 error.
I am out of ideas, I hear mtty.exe is a good program for this kind of thing, but what I want to know is if this is fixable or if I should give up!
I have been working on this since 2pm today none stop!
Can any of you guys give me any suggestions please?!?!?
Kind regards,
Jonathan
Should be a cinch
Did you SPL the Phone before flashing roms?
If you put the phone into the bootloader mode The RGB screen and kill of activesync you should be able to run one of the flash update programs.
If I have flashing problems its usually Active sync so I kill it then run the flash program.
I've got a sneaky suspision your battery might be causing the problem.
Hi there, thanks for the reply. As I was new to upgrading I havent used SPL on the phone before flashing the ROMS. I did use an unlock tool recently as i wanted to try a different network SIM to see if it worked when I was in South America, so the phone is unlocked to all networks. Are you saying if I SPL now it should sort the problem out? If so how do I do this withour ActiveSync working - can you use SD?
Another thing I failed to mention was that when I start an upgrade and it follows all the steps, it doesnt say the current ROM on the screen where you press update ROM. It just gives the name of the new ROM and the current one is left blank.
I have disabled Active Sync before attempting the update. It seems to go through fine and then the phone restarts wafter 1% of the update.
What makes you think it is the battery? I am happy to spend under 20 pound on ebay if you think it will fix the issue!
try unbrick.bat.......my trinity was also stuck.......unbrick.bat save my day....
The same happened to me several time....I could not find a solution other than this one:
1. Flash the official HTC ROM.
2. Flash the required ROM then.
it works for my TrinTy.

Please Help! xperia is stuck on Bootload mode!

hey guys, few days back i strung the courage torgether to flash rom.
everything was going well till i noticed that my xperia was updating the rom and seemed to take forever to load the rom.
at present it switches itself on and off and says continuing to update rom and then a white screen with blue text says loading.
I need to find a solution to this as if i tell my dad that the device is cooked im in deep, and i also do not have insurance of which was a dull thing.
so please any suggestions and tips whould be much appriciated ty. x
I am no expert. But have you HardSPL your phone before flashing the ROM? That is a requirement.
For the current prob, I can imagine taking out your SDcard (if you are using card method) should stop it from reading the image. You prob have to hard reset the device for it to boot properly.
hey thanks for reply,
Iv tried removing the sd card but to no evail, when i do this the xperia is stuck at the bootload mode and says continuing to update rom, my battery has drained so i cnt switch the phone on, it has to be dne when on the charger.
and a hard rest does nt work.
Did you HardSPL? If not, you will need to do that first.
Anyway found few threads on it.
http://forum.xda-developers.com/showthread.php?t=540459
http://forum.xda-developers.com/showthread.php?t=455553
yes sorry i didnt metion, yer i did hardspl, and i just tried hard restting and nothing happend the screen stayed on bootload and then few seconds later went to loading please wait . . . ?,

Diamond keep restarting when turn on, pls help

My HTC Diamond have some trouble: Every time I turn it on, it boot to splash screen and then restart, then go on splash screen and restart again, again, and again.It dont boot to Windows.
I am using 2.03 WWE ROM anh tried to reflash so many rom, both Rom ship and cooked rom but still no hope.
I tried to downgrade its SPL from 1.40 Olinex to original SPL as following thread: http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
But not work, in tri colors screen is still 1.40 Olinex
So anyone pls help, I love my Diamond so muc, dont let it dying like this. PLS...
I do MTTY everytime i flash new ROM
well, has happened to me before, I just take out the battery and leave it out for couple minutes and then should be ok, try starting it when is on the charger, also hard-reset is always an option. I think that is softwware based problem.
cheers
My diamond also started doing this yesterday night, it was working fine until now. I have flashed it with Donsalaris rom which came out Xmas last year and its been working fine for over 6 months now.
Then yesterday night after a long chat it started to do this ??..
I tried taking out the battery still no good. I hard reset it and now works fine for sometime like a few hours to a few minutes and go into this restarting cycle again.
I'v left it on the table and out of the blue it will reset it selfs and start the cycle ?
Seems like a software problem but a hard reset should have solved it right ? But it only partially solved it
Anybody gott a clue as to what it might be ???

What is wrong with my Tilt and how can I fix it?

I recently purchased a used tilt that was hardspl modified and flashed with the stock rom. It worked fine for like a day or so and then when I was just browsing the phone and playing with the games and stuff it turned off on me. I thought the battery was dead so I let it charge for a while and tried to use it. However, whenever I turned it on the AT&T logo screen would show up and it would vibrate but then the phone would turn off before windows mobile booted. I tried soft and hard resets but they did nothing. One time out of the blue the phone worked again for a few minuted but then shut off on me and continued to have the same booting problems. Since then I have tried different batteries made sure the batteries were fully charged and tried flashing some roms via usb sync. I first tried ahmedfikry's rom but that did nothing so I moved onto flashing the stock rom (yes I realize now I should have flashed the stock rom first). This also did nothing, so I have been flashing various radios that are suppose to work with the phone. Nothing seems to help. The phone can get to the tricolor screen when I do the hold camera+power button thing and this is what it says:
Security Unlocked
KAIS1*0 MFG
SPL-1.0. OliPof
CPLD-8
Even though the phone shows up as mobile sync in my PC tray when I have it at the tricolor screen, I cannot access the device at all. Is that normal? Furthermore even though I have flashed roms successfully (or at least it says it was successful) whenever I go to flash the rom again the CustomRUU program shows previous rom as being blank. What else can I do? I am at my wits end and as a newb it is very hard to find information since the wiki is down.
try reflashing it. If it shows up in activesync I don't think that it is dead, but I could be wrong.
MeteoricManiac said:
I recently purchased a used tilt that was hardspl modified and flashed with the stock rom. It worked fine for like a day or so and then when I was just browsing the phone and playing with the games and stuff it turned off on me. I thought the battery was dead so I let it charge for a while and tried to use it. However, whenever I turned it on the AT&T logo screen would show up and it would vibrate but then the phone would turn off before windows mobile booted. I tried soft and hard resets but they did nothing. One time out of the blue the phone worked again for a few minuted but then shut off on me and continued to have the same booting problems. Since then I have tried different batteries made sure the batteries were fully charged and tried flashing some roms via usb sync. I first tried ahmedfikry's rom but that did nothing so I moved onto flashing the stock rom (yes I realize now I should have flashed the stock rom first). This also did nothing, so I have been flashing various radios that are suppose to work with the phone. Nothing seems to help. The phone can get to the tricolor screen when I do the hold camera+power button thing and this is what it says:
Security Unlocked
KAIS1*0 MFG
SPL-1.0. OliPof
CPLD-8
Even though the phone shows up as mobile sync in my PC tray when I have it at the tricolor screen, I cannot access the device at all. Is that normal? Furthermore even though I have flashed roms successfully (or at least it says it was successful) whenever I go to flash the rom again the CustomRUU program shows previous rom as being blank. What else can I do? I am at my wits end and as a newb it is very hard to find information since the wiki is down.
Click to expand...
Click to collapse
Upgrade your SPL! Newest SPL is 3.56, I recommend 3.xx (xx - whatever you want), because they work perfectly with WM 6.1 and WM 6.5. Older SPLs might cause you some problems...

Categories

Resources