Related
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Anonymous said:
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Click to expand...
Click to collapse
Hell, its worse than 'just awful'....
...The Bluetooth on the PDA2K is just downright unusable.....
...I am still holding my breath, praying to GOD they get a real fix out and not just a 'here ya go' patch with more problems in it......
BT version... MDA III new ROM
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
have a hcb-30 bluetooth carkit that worked great with my Qtek 2020, but i cannot seem to get it to work with my qtek 9090....it finds the qtek allright and pairs with it, but cannot connect....my bluetooth version is 1.0.0 build 2200...
hope they get a fix out soon...
Re: BT version... MDA III new ROM
lukasz said:
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
Click to expand...
Click to collapse
I'm running v1.0.0 Biuld 2200
Mine also likes to turn the unit on every minute or two and run the battery down VERY fast...........
onurd said:
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
Click to expand...
Click to collapse
You may tried that DON'T PAIR the HBH35, Afterwards, use a Bluetooth connection wizard to add it. This may be OK to add HBH35.
I don't know how those incompetent idiots could release the blueangel with such a obvious bluetooth problem, HOW CAN THEY NOT see it! the error messeges pops up so frequently.
Go for it, version 1.5
http://forum.xda-developers.com/viewtopic.php?p=65548#65548
I couldnt get 1.5 to work on my pda2k, cant overwrite certain files... how did you do it?
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
you don't have it yet and you are telling other people to go for it! i dont think it works for the pda2k
Did you read or post first?????????????????
As you can see Guest and firebird say it worked to some degree for them on the PDA2K (MDAIII). Since I didn't have a BT headset to try myself I thought I would help you by pointing you to someone who had.
Read posts before blasting back.
*********************
Guest
Posted: Mon Nov 08, 2004 06:20
Subject: BlueTooth manually updated on PDA2k to 1.5.081
--------------------------------------------------------------------------------
http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.
just a warning, the ROM files he was talking about overwriting, cannot be restored by doing a hard reset, it is permanent. if it messes up you will have to re-flash your pda with a new copy of the OS. that's what i had to do since i couldnt get it to work
Hi all,
Since I think we all can agree to that Bluetooth on Qtek 9090 is ****e, I've been snooping around a bit, and eventually I managed to get a brand new upgrade from Dangaard
This patch upgrades the Bluetooth Stack from build 2200 to 3500, and I have experienced some great improvements since I upgraded the device. I’m not done testing yet, but I’ll let you guys know if I find something interesting. I can’t post the file right now because the only link I have to the internet at the moment is my GPRS connection, but it was my understanding that Dangaard will post it on their site within a few days anyway.
I’ll get back to you with more information soon.
Mojn.
cool, please let us know....
However, if you have such a good relationship with DAANGARD, could you please aske them about XDA2 and SE?
THANX
buzz
Found it
http://www.mywindowsmobile.dk/modules.php?name=Downloads&d_op=viewdownload&cid=24
The site is in Danish, but it says that you have to copy both files to the Qtek and then execute them from the file explorer. First do the WWE one, then the Patch file, and then make a soft reset.
That'll do the trick ;-)
Have fun.
Hi,
Has anyone tried these patches? Does it works?
Sam
samvds said:
Hi,
Has anyone tried these patches? Does it works?
Sam
Click to expand...
Click to collapse
I have installed them. Before these patches my Qtek 9090 would turn on by itself when I have paired to the bluetooth carkit. Now it does not do that anymore. I never had problems using the bluetooth carkit together with bluetooth TomTom. So I can not say whether the patches have solved the issues when using bluetooth headset together with navigating using TomTom bluetooth.
've installed and tested the BT patches. I had several problems with the BT headset that are now solved.
- Headset was not reconnected after power off and on again: solved
Now it behaves in a strange way, that the BT keeps connected while the device is powered off and when you turn it on again, BT turns OFF and then On again in a second and the headset is reconnected.
Let's see if this has an impact on battery, as prior the patch, the battery was going down dramatically if the headset was paired!
For the moment I can recomment it, I have a Qtek9090
bluetooth patch
It's a shame to make a path after selling a defecting device.
Each patch that i have tested doesn't work enaugh for me.
It resolve some bugs but audio quality and crackssss are already here.
I have qtek 9090 and motorola 850. Poor audio quality and i have to stay front of the device to speak. If i stay front of it work well.
Is there another patch to test after v3000 and V3200 because it doens't resolve audio quality and distance.
Im using the update from windowsmobile.no ( aka mywindowsmobile.dk )
Found this one
http://www.qtek.nu/default.asp?nc=9683&id=110&element=0
It should update
GSM Radio
Bluetooth MMS Klient
Fix the sound troubbles for the reciver of a call from the phone.
can be downloaded here :
http://www.qtek.nu/files/BA_WWE_BP_12200_126_10600.zip
I wont/cant do anything with it, since it will only install on Swedish 9090, but maybe some off you guys can get the important files out of it??
yep i agree can someone post the important stuff?
I have Swedish QTEK 9090 and i also had installed this new ROM.
It wont fix this well known Jabra and Qtek crackling problem.
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
XzaniX said:
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
Click to expand...
Click to collapse
All Rom's released in Scandinavien are English.
The installer checks the country code on the phone and wont installed if it's not Swedish.
Well it is suppose to not installe, but for some reason a Norwigean guy over at windowsmobile.no got it installed without problems.
It wont install on mine, bought in Norway.
Does anybody know where to change the country code??
download
Non of the links work, can someone post the cab file?
Check out this link from PocketPCThoughts.com for a new Bluetooth patch from Broadcom for the PDA2K...
Fellow MVP Helio Diamant, of Pocket PC Freak, has gotten a fantastic little nugget for iMate PDA2k owners:
Quote:
A friend of mine has just come back from CES and brought with him a little CAB file that was being given by the guys from Broadcom there. They told him we can publish and offer for download, so I am putting it here to you guys too.
When installed, this CAB adds the following profiles to the Broadcom BT stack in the PDA2K:
1. High-Quality Audio
2. Keyboard
This means that those of you holding stereo headsets can now connect them to PDA2k and here music, navigation instructions, etc from the device. As well, Bluetooth Keyboards are supposed to work well.
Early reports suggest it works with a number of devices, including both HTC Blue Angel and HTC Harrier units; it might work with other Broadcom-based (i.e., Widcomm) Bluetooth units, but there's no guarantee. If you're interested in playing "with it, you can download the CAB here. Note: This update is unofficial and unsupported; install it at your own risk, and do a backup first! As far as I know, it's a RAM update, but I haven't tried it. Good luck if you do. "
http://www.pocketpcthoughts.com/images/parekh/misc/PDA2K_BroadcomCorp_BTUpdate.cab
i already installed on my i-mate and had to do hard reset since it hanged in boot mode.
thanks to sprite backup i am back
noviur said:
i already installed on my i-mate and had to do hard reset since it hanged in boot mode.
thanks to sprite backup i am back
Click to expand...
Click to collapse
Noviur,
On which device did you try ? i-Mate PDA2k?
cheers,
bins
install seems not to work
Just tried the cab install (both from my SD card and Program Files location - after resets), but nothing seems to have changed on my i-Mate PDA2k with Rom 1.22.162 WWE.
1. No BT Services were added (still only File Transfer, InformationExchange, Serial Port, Personal Network Server, Dial-up BNetworking Server, Hands-Free),
2. No update seems to have happened, all module versions remained at 1.0.0.3500 (except obviously the BTPluginManagerCE.exe [1.0.0.1]),
3. Despite the dialog box telling it is "writing information for Remove Programs" it can not be found back in the Remove Programs.
Any clues?
cheers,
bins
P.S. Just in case, and like Noviur, reverted with Sprite Backup
The version information in the package suggests 1.6.0.0600
did you install the 1.6.0.0600 upgrade before u installed this?
i installed it.. the new 2 profiles show up but the audio one doesnt work ..
i have pda2k
any help???
I installed the new patch on an SX-66. It doesn't upgrade the Bluetooth stack or provide new services. But it does add 2 new profiles. One for a Stereo audio headset (this won't work with a Hands free device since the profile doesn't include support for a MIC.) and one for a keyboard.
I also switched my Bluetooth stack to the 1.6 version posted here. This seems to be a stack based on Widcom as opposed to Microsoft. Although my device worked and seemed to pair faster my Handsfree device didn't come on when dialing the phone. So I switched back.
Remco, thx, installed the Broadcom 1.6.0.600 cab-file first and afterwards installed the PDA2k cab-file.
Update seems to have worked and indeed have the two new client profiles.
Will check in the store tomorrow if the HQ audio works indeed and if no other nuisances arise.
Will keep you in the loop.
cheers,
bins
Installed it on my Qtek9090 with rom 1.22.00/1.06.00/1337.38/1.22.556
I was able to bond my Logitech DiNovo keyboard to the PDA and use it !
It works very well, very cool to be able to type on a full size keyboard on your PDA.
I don't own a BT audio headset, so i wasn't able to test that.
All other devices like my GPS mouse, Bluetrek G2 headset etc. seem to work ok as they did before.
nop, it was I-Mate PPC. I new it is for PDA2K, but wanted to try it
Previously I installed Widcom BT 1.6.
No luck for me ... for now at least
Did it answer calls through the b/t headset? Mine wouldn't connect to the headset for outgoing or incoming calls. Also if it does work,which PDA2K cab did you use?
Thanks
bins said:
Remco, thx, installed the Broadcom 1.6.0.600 cab-file first and afterwards installed the PDA2k cab-file.
Update seems to have worked and indeed have the two new client profiles.
Will check in the store tomorrow if the HQ audio works indeed and if no other nuisances arise.
Will keep you in the loop.
cheers,
bins
Click to expand...
Click to collapse
anybody tried it on an magician device?
The file is no longer there!
Could someone please upload them agian or e-mail it to me
[email protected]
Thanks
Does this upgrade support the Audio Gateway preference (which enable u to stream mp3s to a BT headset)??
can somebody please email it to mack AT netcom.no ?
(the download URL does not work)
hi,
I have look high & low for it.
can i have the bt upgrade too? my email [email protected]
and that there is of the option of the BT dial up modem??
for when they will troubleshoot this.
greetings
Here's the file
I tried it on my HTC Himalaya. It wouldn't play any sound, not even callers voice. I had to hard reset the unit.
Good luck
Johan
Hi,
I just got my HP bluetooth headphones... and I absolutely love them!!!. The range is ok... not great, but enough to be considered fully usable. It crackles if there is some physical resistance between the MDAIII and the headphones, but other than that, they are awesome...
Anyone that is considering to get them, I highly recommend it. But be sure to have a 3500 bluetooth stack (with the extensions posted here of course) and Radio 1.06.02 (I am not sure whether 00 would do equally, but I recommend 02).
Treo
Me too. Can someone email me a copy of this file?
[email protected]
Thanks!
Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?
Guys,
Where can i get a bluetooth stack that have A2DP stack on it so that i can use it on my stereo bluetooth headset for audio....
Try this
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
In combinbation with bt 1.0.0.3900
ftp://xda:[email protected] Upgrades/BroadcomCorp_BT1.0.0.3900.cab
Works fine on my pda.
I tried the first cab and it broke my today screen! The wallpaper is black behind PocketBreeze and scrambled behind iLauncher. Weird. Soft reset doesn't help.
I already had BT 3900 so I didn't use the second cab.
Oh wait, today screen problem solved! I switched wallpapers and then switched back to the original, it's fine now. I'll submit this post anyway for reference if it happens to someone else.
Anyway, the A2DP profile is there all right, so thanks Vastloper!
thanks. but the link seems not working....
my fault
it works now
I tried the 1st link, but it made no difference.
how to check if I managed to have a2dp profiles on my sx66?
Robrecht said:
I tried the first cab and it broke my today screen! The wallpaper is black behind PocketBreeze and scrambled behind iLauncher. Weird. Soft reset doesn't help.
I already had BT 3900 so I didn't use the second cab.
Oh wait, today screen problem solved! I switched wallpapers and then switched back to the original, it's fine now. I'll submit this post anyway for reference if it happens to someone else.
Anyway, the A2DP profile is there all right, so thanks Vastloper!
Click to expand...
Click to collapse
In Bluetooth Manager, select "new connection". There should be a new option in the list called "High quality audio". Use that to connect to your headset.
Did you download the .cab file and run it on your device? You have to download it, copy it to your pocket pc and run it by tapping on it in file manager. If you did all this and still don't have the High quality audio option, I have no idea what could be wrong.
By the way, once you've managed to install the patch: if you have a ROM version with Windows Media Player 10, you may want to read this thread.
link broken
Link seems to be broken,......
link broken
Link seems to be broken,......
links are working just fine for me.
ty for the lil tut.
It worked perfectly, in my configuration menu, i have the high quality option.
Anyone had trouble actually making an A2DP connection work with these mods?
The A2DP profile is there, and seems to have all the right stuffs, but actually making it connect to my earphones (sony DR-BT20NX) is proving an issue.
Thus far ive only managed a normal HSP hands free style connection.
Such a waste.
Andrewcheese said:
Anyone had trouble actually making an A2DP connection work with these mods?
The A2DP profile is there, and seems to have all the right stuffs, but actually making it connect to my earphones (sony DR-BT20NX) is proving an issue.
Thus far ive only managed a normal HSP hands free style connection.
Such a waste.
Click to expand...
Click to collapse
Same here:
Blue Angel to JVC KD-BT1 carstereo:
Nothing but "connection error" (Have'nt tried your HSP connection, though)
Awesome!
Thanks, this worked like a charm although I did have to perform a Hard Reset first. I can now listen to stereo sound through my Oakley O Rokr sunglasses and use my hands-free headset.
XV6600 Verizon
I downloaded and installed
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
which gives me the High Quality Audio profile. However, I only get sound when playing music through Media Player. All other sounds (system sounds, telephone, sounds from games) are muted. Am I doing anything wrong?
Zippy1970 said:
I downloaded and installed
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
which gives me the High Quality Audio profile. However, I only get sound when playing music through Media Player. All other sounds (system sounds, telephone, sounds from games) are muted. Am I doing anything wrong?
Click to expand...
Click to collapse
Anyone? (bump)
licence expired
I installed it, and all I got it this
"Sorry! Bluetooth can no longer be used because the licence is expired.
BDA: 00:09:2D:30:5A:98
KEY: E3E53E19B3E8214C543A73C0A8B9A074DD3B1753515CD8"
I hit ok, and it turns my bluetooth off.
why? I just want to find a blue tooth that has AD2P that doesn't need me to upgrade as I don't have some of the buttons working to get into bootload mode.
please can i have some help
Bluetooth expired for A2DP - Serial com for BT-GPS never worked after
mmci1525 said:
I installed it, and all I got it this
"Sorry! Bluetooth can no longer be used because the licence is expired.
BDA: 00:09:2D:30:5A:98
KEY: E3E53E19B3E8214C543A73C0A8B9A074DD3B1753515CD8"
I hit ok, and it turns my bluetooth off.
Click to expand...
Click to collapse
Same for me.
Furthermore ever since the update to A2DP my BT-serial com connection to my BT-gps-mouse couldn´t be established anymore.
Any help? NEWER - BETTER A2DP update?
ok so i have an htc p4000 and i recently bought a scosche bluetooth receiver kit and i'm able to produce some sound but its not high quality. i checked and my phone does support the A2DP service but it sound like my device is outputting sound for headphones and not normal speakers. i used both the cabs you put on here and they are functioning but it says that my bluetooth is off in it. my dad has an ipaq and the bluetooth manager on his phone seems to pick up my scocshe perfectly and is perfectly able to play. anybody know where i can find that bluetooth manager? thanks for the help if you can help
Hope this help:
http://forum.xda-developers.com/showthread.php?t=274425