Hi everybody, my first message here
few days ago i got my new Qtek 2020i... but i have some problems with it..
1) sometimes (expecially when activly using) I hear single flicks(sounding very likly elecric discharges) from device...(even when sound is off)... last time i noticed that it sounded at the moment I quit program and memory it used was released... but sometimes it flics just when standing in cradle.... does anyone have same noisy sounds? or it's damaged device, and I should replace it?
2) I can't close dialing screen... I installed spb plus plugin which makes programs really close when you press X button.. it works, but it refuses to close dialing screen - when i press top rignt corner shortly - it blinks with phone screens I just used(exacly them - if I pressed on "quick call" button, then returned and clicked on history of calls and returned again - it will fastly show that 4 screens in that order) and returns to dialing screen again.... I can exit it only by holding top right corner button for 3 sec's or start button... but it still holds "phone" task in memory(spb plus shows it.... but there is now such task until I use phone for the first time after soft reset) - and if I use phone again - the number of screens I'll see on exit will increase and increase untill I make soft reset.... Of course I can always exit by long pressing the button... but it's annoying, and maybe there is another solution?... is that my software problem? or it's windows bug?
ps thanks for nice forum, I already found a lot of usefull info here =)
Hi experts, I was using ArtZ's Widcomm WM5 rom and radio 1.15 for a week with no problem. I think after I uninstall the HTC SmartDial and problems came up. The Answer(Green Phone Button), Hang up(Red Phone) buttons and D-pad including action button in the center of d-pad are not functioning as they should. When I press answer button in WM5, first start menu, contact and calender all pop-up. The rest of the buttons including D-pad starts different programs. I tried to reflash to Ivan's WM5 rom and downgrade to WM2003, but the buttons still won't function properly. Help, I can't even answer the phone or hang up using buttons.
YEAH! FIXED itself.
I took out the battery and leave it over night while the backup runs out. I put back the main battery and buttons works again. It is nice to map the Answer button to voice activate or something else. Does anyone knows how the change the phone buttons or D-pad to some other functions?
Hi
I don't know if anyone has experienced this or has a fix for it.
I picked up my Tytn II last week and I must say it's a cracking piece of kit. I seem to be experiencing a problem though.
If I say for example make a voice call and then hang up. I find that the word "phone" replaces the start menu in the top left hand corner of the screen. This wont default back to start and effectively makes the whole top row of icons inoperable. Ie battery status volume control etc. I have found this problem when using other apps, ie calendar, so it's not specific to just making voice calls.
The only way to get the top row of icons working again is to do a soft reset
All icons not on the top row seem to work ok (apart from keylock)
Any ideas ??
Massiv
Dont soft reset... just hit the power button to go into standby, then hit it again and the device will work again.
Hey presto it worked. Thanks for that. It's a bit annoying having to do that though.
Massiv
Its not a fix... its just a workaround.
When you end calls. Try first pressing the end call button, then the ok button.
Hi,
Just last friday I got my new Tytn II and yesterday I discovered that the Backspace button on my soft keyboard didn't do anything anymore. All other soft buttons where working fine. Then opening the slider key board and trying the back button it didn't work either. Same goes for all (!) keyboard buttons. Then tried the green and red buttons, the tilt wheel and finally all hard buttons on the device. Only the power on/off button works.
The phone can be operated using the stylus. No problems there . I only installed Tom Tom, Remote Desktop and Google Maps. I am thinking of returning the phone to the shop, but my personal data and settings will be gone I think.
It seems like the driver that triggers hard button functions in windows is missing, broken or just plain ignorant. Anybody any ideas on how to troubleshoot and repair this?
Thanks for the trouble.
Cheers,
Donald
Vitruvian said:
Hi,
Just last friday I got my new Tytn II and yesterday I discovered that the Backspace button on my soft keyboard didn't do anything anymore. All other soft buttons where working fine. Then opening the slider key board and trying the back button it didn't work either. Same goes for all (!) keyboard buttons. Then tried the green and red buttons, the tilt wheel and finally all hard buttons on the device. Only the power on/off button works.
The phone can be operated using the stylus. No problems there . I only installed Tom Tom, Remote Desktop and Google Maps. I am thinking of returning the phone to the shop, but my personal data and settings will be gone I think.
It seems like the driver that triggers hard button functions in windows is missing, broken or just plain ignorant. Anybody any ideas on how to troubleshoot and repair this?
Thanks for the trouble.
Cheers,
Donald
Click to expand...
Click to collapse
OK - obvious things first, this is either going to be a hardware or a software problem. If it's hardware, you need to return it to the shop as it will still be under warranty. If it's software, we'll be able to fix it with a Hard Reset.
Although a Hard Reset will remove all your settings and personal data, it will put the phone back into the state it was when you bought it. Seeing as the keys worked when you bought it, they should go back to working too!
My advice would be firstly to backup everything you need (contacts, e-mails, etc) onto your PC or your Exchange server. Then press and hold both softkeys and press the reset button with the stylus. Keep the softkeys pressed until you see a white screen warning about doing a reset, then release the softkeys. Press the green pickup button to start the reset, then the green button again when prompted to restart the phone. It will take a while to reboot first time, and then it'll go through the same screens it did when you first opened the box. Re-sync all your contacts/e-mails and you're sorted.
If the phone won't respond to the softkeys when you reset, and instead begins a normal reset, then it's definitely hardware. It could simply be a connector that's come loose, but opening the phone up will invalidate your warranty - so in your case, as it's so new, I'd say return it back to the shop and get a working one.
Good luck.
Perform a Hard Reset. That will rule out and correct any software issues. If it works after that it was the software that was messed up. If it doesn't work after that then its more likely a hardware issue and will need to be exchanged.
Confused Stu said:
Then press and hold both softkeys and press the reset button with the stylus.
Click to expand...
Click to collapse
Where is "the reset buton" that can be pressed with stylus? I have read that on the XDA-Wiki page too, ...but I can't understand what is "the reset buton" (maybe is the power buton ...but I don't need the stylus for press it )
breakx said:
Where is "the reset buton" that can be pressed with stylus? I have read that on the XDA-Wiki page too, ...but I can't understand what is "the reset buton" (maybe is the power buton ...but I don't need the stylus for press it )
Click to expand...
Click to collapse
OK for a soft reset there is a small hole to the left of the usb input on your device. Just simply insert the stylus into that hole and push
For a hard reset hold down both soft keys (first softkey to the right of the green button and the second soft key to the left of the "end" button or red button). At the same time insert the stylus into that little hole and give it a gentle push.
If you actually read wiki there would be a nice diagram there for you.
Oh ...I understand now ... Thank you!
This has happened to me twice. I'm not sure what led to it and I've not been able to reproduce it. I think it's a driver issue. A soft reset fixes it.
Confused Stu said:
If the phone won't respond to the softkeys when you reset, and instead begins a normal reset, then it's definitely hardware. It could simply be a connector that's come loose, but opening the phone up will invalidate your warranty - so in your case, as it's so new, I'd say return it back to the shop and get a working one.
Good luck.
Click to expand...
Click to collapse
this has happened on my wifes tilt/8925......worked fine on the way home then after she got home the green pickup button the end call button the windows button and the ok button have all stopped working. I thought it would be hardware but flashed anyway. remapped a couple of other buttons to bring up dialer.............do you think this may be a connector also.......or something more detrimental?
Thanks
chipsxj said:
this has happened on my wifes tilt/8925......worked fine on the way home then after she got home the green pickup button the end call button the windows button and the ok button have all stopped working. I thought it would be hardware but flashed anyway. remapped a couple of other buttons to bring up dialer.............do you think this may be a connector also.......or something more detrimental?
Thanks
Click to expand...
Click to collapse
Did you soft reset? I have this happen on my Tilt sometimes, but it's always fine after a soft reset.
khaytsus said:
Did you soft reset? I have this happen on my Tilt sometimes, but it's always fine after a soft reset.
Click to expand...
Click to collapse
yes..........soft rest many times.......powered off and back on.........removed battery........attempted hard rest, but buttons did not work..........re-flashed phone....still doing it.
Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars. I do have the kaiser tweak and HTC 5 button homepage thingy. The title bars didn't change right away so I turned the device off and on. Yet when i turned it back on, it freezes on the ATT startup page and displays the three different numbers on the bottom corner, i think they're some kind of IP or radio. Does anyone have any ideas on what is wrong with my phone? I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
chadwick47 said:
Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars.my phone? ....
.....I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
Click to expand...
Click to collapse
I'm really surprised that a hard-reset did not restore you to OEM settings...
WHEN you get restored to where you want it... Try: http://rapidshare.com/files/68506785/UI_TWEAK.ZIP
It works awesomely!
It even catalogs all .tsk files and U can export as well.
Best of luck!
trb
just an FYI:
HTC Kaiser - TyTn II - T-Mobile Vario III
A software option is also available. Start> Settings> System> Clear Storage.
Type 1234 in the box and tap YES.
===> OR <===
Press and hold the Left & Right SOFT KEYs and at the same time use the stylus to press the RESET button. Release the stylus but keep pressing the SOFT KEYS until you see the Hard Reset warning screen. Release the SOFT KEYS and then press the LEFT PHONE KEY.
Not from me, credit:
http://www.4winmobile.com/forums/wi...ow-hard-reset-your-wm-device-device-type.html
Just to be clear, the soft keys are those two above the keyboard when the device is slid open....? right? Also should the device be powered on when I do this? How long to I have to hold down the buttons? Thanks for all the help!
Thanks I was able to do the hard reset, I didnt know the correct soft keys.