Has anyone else had a problem keeping a Bluetooth GPS receiver paired with Tomtom. After much messing about I managed to get tomtom working and even paired it with the receiver, but when I switched off tomtom and restarted it the next day I had to redo all the pairings again, altering com ports etc.
Surely this can't be right
same problem here,
still looking for a solution, will post here if i found it, if you can find it first, please post it too...
i'm gonna take a look at the file properties written by TomTom, maybe they are setup to be readonly, making Tomtom forget it' setting and rest the com-port settings after every restart.
i m not sure yet if it's a tomtom problem or a bluetooth / gps problem of windows mobile 5.
CIAO!
VOODOOS!L
Bluetooth tomtom
Look in the registry for the com9 change that to com7 (the com port you used for pairing with gps device. It should work. Bought regedit.net for editing the registry
try to change in registry
Where do you change it in registry edit
Did you open up the GPS control panel?
I found thizs excellent walk thru a few month's ago & have had no problems whatsoever.
http://www.howardforums.com/showthread.php?t=742385
I finaly found the problem: at the bluetooth pairing setup of the com-port, the default selection is to use a secured connection, but it seems like TomTom doesn't support a secure connection very well..
so if anybody else has this problem: remove the current bluetooth pairing of your GPS device, repair, select the serial connection, add a new outgoing port to be for example COM6 and remove the "secure connection" selection.
Open TomTom and select the COM port you used as at the Bluetooth pairing com port.
Now, when the GPS is turned off and back on again, the pairing will be remembered and TomTom will immediately recognize your GPS.
I hope this will solve some problems for other people too...
CIAO!
VOODOOS!L
I wonder if anybody knows if it is possible to have two (or more) divices connected at onceon a Blue Angel?
eg. Tom Tom 6 plus a hands free connection.
I have tried every configuration I can think of, different ports ect, but to now avail.
With the gps connection up and running, as soon as you turn on the hands free , the gps connection link is lost, turn off hands free and it will resume connection.
I am using BA WM5 AKU3.5 R4 - xplode's excellent rom
In GPS settings
Program is using COM 5
Hardware is using COM 0
Manage GPS settings set to Auto
In Device settings,
BTGPS unit is on COM 0 (Serial box ticked)
Hands free is unassigned
Any help will be much appreciated.
any idea's anyone?
On Last Baniaczek's ROM I made an experiment just a moment ago: BlueAngel, Navigation system (Polish one, Automapa), plus GPS on Bluetooth and A2DP headset - first connected headphones, then added GPS (using automatic GPS connection - it's M$ Stack) - Everything seems to be working fine. I thought it was a bit unstable at first, but AD2P stops sending data, when there is no sound from the device.
GPS Settings are default: COM6 for applications and GPS has COM7 assigned on Hardware tab and in Bluetooth outgoing port. Quite seamless.
then I made the 2nd one: same headset connected in Handsfree mode: indeed turning on navigation made it connect and disconnect every few seconds.
For me it seems to be fault of M$ BT stack: it cannot hold 2 similar streams on BT (COM and Handsfree/Headset are both typical serial connections of highest priority in BT stream). At the same time it can cope easily with two different streams (A2DP is lower priority, high-bandwidth BT connection).
I'm not sure, but I think when I used old Helmi 1.3.2 with Widcomm stack it could cope with GPS and Handsfree at the same time, but it needs more testing.
jakubd is right it is limitation in MS BT Stack
Don't give up and it should start to work. I have similar problem with BT GPS and BT headset. GPS goes on and off while headset is on. And than I try to switch headset off and on, BT off and on, GPS off and on and after some time it start to work together with no problem. It takes first 10-15 minutes of my voyage but then it works for the remaining few hours.
Sorry, but I still didn't find out what combination make it work. If I do, I will post it here as workaround.
And I'm almost sure that I had no such problem with Helmi 1.4 ROM.
Thanks guys,
have tried every configuration I can think of, but its always the GPS connection that is dropped, not the hands free, this would not be a problem if it was just when you are answering a call.The GPS reconnects only when you disconnect the hands free connection. ?
Has anyone Successfully used the Widcomm stack with this type of setup?
I am sure alot of members would find this usefull if it can be made to work!
This is my experience:
ROM : Helmi_BA_WM2k5_AKU3.5_v1.4.CF2.R2 (baniaczek)
Tom Tom 6
GPS : Bluetooth
Headset : Nokia BH-300
When the headset is on and connected, the GPS doesn't work (TT say no GPS found). When I turn off the headset, the GPS is working.
With ActiveSync I have the same problem: when the headset is turned on, I can't establish a connection with the PC via bluetooth.
BUT!
If I use a different headset, a Logitech HS03, all is working fine. I can leave the headset on and the GPS is working. I can receive incoming calls with no problem (using the headset) while I'm driving without loosing GPS signal.
With ActiveSync is the same: I can connect my PC with the headset on.
I have no idea why there is this difference with these two headsets, but one is working and the other no. I don't know if the problem is the MS BT stack, but my test demonstrates that under some circumstances this stack could manage more than one connection at time.
bigmike said:
I don't know if the problem is the MS BT stack, but my test demonstrates that under some circumstances this stack could manage more than one connection at time.
Click to expand...
Click to collapse
Bigmike, my point exactly. As I wrote in my post I keep turning on and off until finally it works. So there are some circumstances under coexistence is possible.
It seems that devices try to use same port which means that first device does not reserve port for itself. I am not an expert but it seems if we could somehow force devices to use different ports problem would be gone.
bigmike said:
If I use a different headset, a Logitech HS03, all is working fine. I can leave the headset on and the GPS is working. I can receive incoming calls with no problem (using the headset) while I'm driving without loosing GPS signal.
Click to expand...
Click to collapse
If this works with one set and doesn't work with another, it might be connected to list of profiles supported by the headset:
1. Headset - HSP - more common, typical profile for use with cell phones (supports AT commands)
2. Handsfree - HFP - audio-centric, used mostly in cars, less common
http://en.wikipedia.org/wiki/Bluetooth_profile
My SonyEricsson HBH-600 has both profiles (checked with services list on SonyEricsson phone), but I don't know how to select which profile is used by headset.
Just a thought...
sassa said:
Bigmike, my point exactly. As I wrote in my post I keep turning on and off until finally it works. So there are some circumstances under coexistence is possible.
Click to expand...
Click to collapse
I hope you haven't misunderstand my previous post. I haven't in mind to minimize the value of your post (very useful is someone will try to investigate about this problem).
I was thinking that somebody, reading your contribute, could wrongly think: “you're are a lucky guy and turning on-off the headset repeatedly you crash some library and the two devices are working together”.
My intention was to remark the fact that under some circumstances the headset and the gps can connect together every time and always at first try: it's not lucky, crash or random events.
jakubd said:
If this works with one set and doesn't work with another, it might be connected to list of profiles supported by the headset
Click to expand...
Click to collapse
I have a similar thought.
It seems to me that some times ago I have read that it should be possible to change some profile's parameters “playing” with the registry.... but I could be wrong...
bigmike said:
I hope you haven't misunderstand my previous post. I haven't in mind to minimize the value of your post (very useful is someone will try to investigate about this problem).
Click to expand...
Click to collapse
No I have not, bigmike, just the opposite. I was delighted that somebody confirmed my point.
bigmike said:
My intention was to remark the fact that under some circumstances the headset and the gps can connect together every time and always at first try: it's not lucky, crash or random events.
Click to expand...
Click to collapse
Couldn't agree more. And I think it's worth trying to resolve it.
Multiple BT connections - solution?
I think I find a solution for this, or maybe we can call it workaround. At least it works for me.
As I wrote in my previous posts, I could make it work every time just didn't know how. Now I established repetable procedure which worked every time for reasonable number of experiments.
Secret was to turn on BT headset (in my case Plantronics) and BT GPS device (Haicom 406-BT) and GPS program (iGo) first, and then go to Comm Manager and turn bluetooth on.
So my procedure is:
1. make sure that BT is off in Comm Manager
2. turn on BT headset
3. turn on GPS device
4. open iGo program
5. minimize iGo
6. turn on BT in Comm manager
7. open iGo and make sure it's connected
8. go to phone and call myself just to make sure it works
9. back to iGO and make sure it works
If 8 or 9 fails for the first time, just turn BT off and on again in Comm manager and check it again. I never need to do this more than twice.
Try this, guys, and good luck.
P.S. I don't know if it matters, but make sure that in Settings/Connections/GPS "GPS program port" and "GPS hardware port" is set to (None) and "Manage GPS automatically" unticked.
Very good! Many thanks Sassa!
I have tried for two times your procedure and both tries worked very well (with TomTom6 and Nokia BH-300)
I use a slightly different procedure:
1. BT off in Comm Manager
2. turn on BT headset
3. turn on GPS device
4. turn on BT in Comm manager
5. open TomTom 6 (wait some seconds and make sure it's connected)
6. go to phone and call myself (on the first call the headset is disconnected)
7. back to TomTom and make sure it works
I have noticed a different behavior of the BT headset having the BT always on (in Comm Manager) and using this procedure... but I need to make some tests before writing more.
"Hi guys. Can anybody tell me how do I connect to a bluetooth headest manually through WM 6.0?
I understand that WM6.0 is supposed to do it automatically, but it doesnt . There has GOT to be a way for me to sync the TyTnII with my bluetooth headset manually.
My headset is Jabra320s (piece of crap), and it does not allow me to connect to the TyTnII manually through the headest because there is no menu LCD on the headset. Therefore, in order to connect my TyTnII and my Jabra manually, this must be done though the phone."
--------------------------------------------------------------------------
"hm...its pair'd....here is the situation
even though it is pair'd, when i goto the bluetooth connects scree (device tab) there are no options to connect. the only options that come up are "edit, delete, set as hands-free, set as wireless stereo". theres no connect option. so i cannot tell it to connect....
sometime sit connects automatically, sometimes it simply doesnt, no matter how many times i restart it or the headset. sometimes even when i RE-PAIR it, it still does not connect."
Please only repond to this if you have solved carkit issues.
I have a JVC AVX33 headunit with bluetooth, worked perfect on my old SE K800i, however on my diamond it keeps "booting" the bluetooth connection.
Connects for 30 seconds, looses connection, and connects again.
Is there a possible fix for this?
New Bluetooth Stack?
Tweak?
Or an explanation to why this is happening?
It Renders my Diamond useless in my car setup, and this would meen the world to me to have fixed.
Would purchasing a PARROT bluetooth carkit solve the problem?
Do you search the carkit with the phone or vice versa let the carkit search the phone?
I would recommend to test both setups. Do not forget to make your phone visible for the carkit when you want to pair it. Are you able to enter the bluetooth pair code on the phone when requested?
Hi, i have a Pioneer deh-p9800bt with bluetooth handsfree function and the only way to use it with wm6 and 6.1 (Htc Jamin, Gsmart i120 and Gsmart T600) has been to install Jetware HandsFree Extension. With the Gsmarts the Pioneer connects automatically and all works perfectly, with the Diamond the connection must be started every time from the Pioneer, but, then, all works (also battery and signal level): i think that a registry tweak has to be made in order to have an automatic connection.. i will try to see the differences between the registry settings of the i120 and the Diamond..
Yes i tried pairing both ways phone -> headunit and visa versa, and i am able to pair the two devices with code. However it keeps booting the bluetooth, looses connection and then getting it again. About every 30 seconds.
And i tried JETware yesterday without any change, however i am going through the different JETware config add-ons today to see if the result is better.
I think that its when the phone is trying to update the contact list to the headunit, it crashes the bluetooth. Anybody know if it is possible to change the bluetooth stack driver with another? on the HTC Touch Dual i had previous the bluetooth worked just fine.
bump bump bump
Hi guys,
I have an X1 and a new Nokia6600 slide.
I have them both paired to my laptop and car (which have both bluetooth built-in) Both of the phones have bluetooth enabled and are always visible, all options to disable bluetooth or to stop being visible are disabled.
The biggest difference is this....
When I turn on my laptop or step into my car, my Nokia says, look I found your laptop/car, you're now connected! (without me doing a single thing)
My X1 is like ".........................." nothing... I have to manually enable the connection via for example ActiveSync, and chose to connect via bluetooth and then everything works fine.
I checked every setting concerning bluetooth or security and everything but I just can't find an option to make my X1 act the same as my 6600. It also doesn't matter if I just turn off the 6600 and have only the X1 turned on.
Maybe it is a setting, maybe it needs some tool or something.. I hope somebody here can help me or point me into the right direction.
Thanks!