Hi,
I wonder if anyone knows how to change the registry to have "Letter recognizer" instead "Keyboard" after a sofreset by default in the input panel.
Many thanks
Bye
If I remember correctly there's a utility called EasyTweak from www.10gsoft.com that will do this - a utility that I heartily recommend
Many thanks,
I will try this afternoon
Bye
Hi again,
All OK (a good software)
Bye
Related
I updated today my SPV M3000 from ROM version 1.3.1.11 FRA to the new official version from Orange 2.16.1.3 FRA.
All worked ok. But now the keyboard layout is wrong. When I push the key A in the screw shows the Q.
I need help to now where I can change that.
[/img]
Not 100% sure if it applies to the newer rom:
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
I do that and the key "A" and "Q" work well, but the key "Y" and "Z" are wrong. And also the symbols on the keys, like @, *. etc....
I check with a lot of diferent codes but nothing positive.
I have really a big problem!!
I do that and the key "A" and "Q" work well, but the key "Y" and "Z" are wrong. And also the symbols on the keys, like @, *. etc....
I check with a lot of diferent codes but nothing positive.
I have really a big problem!!
So the reg edit there for the Locale -did- change something, at least?
If so - I guess you just need a different Locale than the 'French' one. What is the physical layout of your keyboard itself? i.e. the three rows of letters on the slide-out keyboard
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
reset device after that.
use AEKMap
techsc said:
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
reset device after that.
Click to expand...
Click to collapse
...sound logical - but where I can do registry settings on the WIZARD ? Which prog is needed ?
Hints are very welcome, cause I flashed my german version (VDA II from Vodafone) with the QTEK eng ROM and have the same problem with the keyboard layout now !
Thanks,
Joe
techsc said:
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
reset device after that.
Click to expand...
Click to collapse
...sound logical - but where I can do registry settings on the WIZARD ? Which prog is needed ?
Hints are very welcome, cause I flashed my german version (VDA II from Vodafone) with the QTEK eng ROM and have the same problem with the keyboard layout now !
Thanks,
Joe
look for...
- PHM Regedit
- Tascal Registry Editor (TRE)
which are the two popular free ones
- Total Commander CE
has a registry editor built-in. does fast searches, but I wouldn't use it for editing much. also free
And there's a few commercial "does everything" ones that include registry editing
Other than that - if you're familiar with the registry on your desktop machine - you should be ready to go
Hi this is my first post here at XDA so I will start by saying hallo I'm John from Sweden and I'm new to all this win mobile stuff and so far I hate it and I love it. Thanks goes out to everybody here at XDA you are making it easier to love the wm6 (htc touch pro ).
So what do I want?
Today I installed a cocked ROM (ELite) and me being Swedish I missed the Swedish hardware keyboard layout and did some search for a solution and I could not find any solid solution, picking up bits here and there and figured out something that works for me and now i simply want to sheer it.
the file swe layout.zip have 2 files
* eT9.Raphael.swe.txt put this file in yore windows directory
* setSweKey.reg run this file from yore reg editor
or skip the setSweKey.reg file and enter this to registry
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime\KeyboardLayouFiles]
"07FF"="eT9.Raphael.swe.txt"
eT9.Raphael.swe.txt is a simple text file you can edit it in a regular text editor and make it fit yore keyboard if yore Danish or Norwegian or what ever.
I hope some will find this useful.
Thanx for the effort but I just can't get it to work.
Do you have a 6.1 or 6.5 ROM?
how do i get that on my phone? when i open my phone in my computer i cant find windows. and how do i find that regkey in my phone?
Hi! Im also swedish and your files worked great! Thank you very much!
I have just one question, I can't do the "@" in the top right corner, it makes an "=" instead... What should I do? You have the same problem?
MVH
Martin
Hi All, I have a small problem with my HTC Touch Pro (bought in Denmark), after installing a custom made ROM (Elite Project RC3). The problem is that after installing the English firmware on originally danish HTC Touch Pro it is quite difficult now to use a built-in QWERTY keyboard. All symbols are mixed up, and I’m not able also to type Danish letters such as æ, ø, å etc.
I have found something for touch screen keyboard, but could not fix it for the phone keyboard. Sorry guys for stupid questions, but this is my first smartphone, and I’m not really familiar with all this register editing and stuff. Are there any cabs existing which can fix my problem? Thanks in advance.
No ideas? Please ...
Hey,
I would like to ask the same question, still i havent flash my mobile yet, but I would do it if there is a solution to the problem.
i have found a german fix, but that do not fix the danish problem.
http://forum.xda-developers.com/showthread.php?t=440779
there must be some who can solve the problem?
Hey, i'am back. maybe wiht a solution,
try this,
Get Registry editor ( http://www.touchxperience.com/en/re...itor-downloads/14-registry-editor-09-cab.html )
Change this key
\\HKLM\HARDWARE\DEFVICEMAP\KYEBD\CurLang
to value 1044 - danish
that whot min stand on and, æøå works just fine
try it and let me know if it works
edit:
HKLM = HKEY_LOCAL_Machine
Perhaps you also have to change
HKEY_CURRENT_USER \ MUI \CurLang
value - 1030
Mobilnaut SYM
Or you could try this solution
http://forum.xda-developers.com/showthread.php?t=459253
try my cab on 7th post from this thread
I havent tried it on the Raphael, but this has worked for me on a lot of other HTC's.
http://forum.xda-developers.com/showpost.php?p=1205169&postcount=14
And while we are at it..
If you want it, I have an old wm5 version of a scandinavian SIP that works with the standard sip.
I've also build a cab that gives you word completion, autocorrection and spell checker in danish. Interested?
Interested
Oleander said:
If you want it, I have an old wm5 version of a scandinavian SIP that works with the standard sip.
I've also build a cab that gives you word completion, autocorrection and spell checker in danish. Interested?
Click to expand...
Click to collapse
Hej @Oleander
Jeg er intresseret, skal jeg send min mail via pm? eller uploader du .cab filen?
mvh Lau
Hi you guy out there!
I recently bought me a Raphael from our beloved Swisscom and guess what: it was crap until I flashed ROMeOS2.
But I was a fool not to backup the entire Windows folder before flashing. I have 2 problems now:
1st I lost TomTom. The maps are still available on storage card but the installation has gone an no cab file to restore it :-(
2nd I'm stuck on an French AZERTY keyboard! To solve this I beg you:
Backup all language files on your Raphael before flashing and send it to me via e-mail so that my task to cook us a Swiss-French keyboard would be much easier!
The important files are, I think, the PQwertyxxxxxx.txt located in Windows folder. But the best, in oder do fix both the problems would be to backup the entire Windows folder.
PM me or reply to this thread it you are interested in helping or send me mails!
Here is what I have so far:
http://www.modaco.com/content/smart...obile-smartphone-internationalization-issues/
Every help is very welcome!
I have more or lesse the same problem, but I would need the swiss-german keyboard. Especially the settings to get the hardware keyboard working with äöü and éàè etc. would be nice.
About TomTom. You can get the installation cab for TomTom from the extended cab collection for ROMeOS2 from Monx here
http://monx.aplace4u.biz/ROMeOS2RAPHAEL/GER/EXTENDED/
This is listed under the german version, but I think it's multilanguage. Got it to work with the maps that were still on my SD card after flashing from swisscom to ROMeOS2 rom.
All right, sounds interesting. I Know that swiss-german keyboards are quite similar to swiss-french. The only difference is in fact this damn éàè and öäü.
Do you know any one who hasn'f flashed his Raphael yet? I basicly don't want to start on an empty base. As I said I'd like to have the PQwertyxxxxxx.txt files to modify...
Have you been on poketpc.ch forum and checked there for solutions? There are many German speaking guys how use Romeos. I don't have many time this month to do research.
Many thanks for le TomTom cab link, I'll check this out soon and keep you updated.
[edit]: TomTom Install worked great. It is multilingual indeed. Thanx noigear!
Mr. HD said:
Do you know any one who hasn'f flashed his Raphael yet? I basicly don't want to start on an empty base. As I said I'd like to have the PQwertyxxxxxx.txt files to modify...
Click to expand...
Click to collapse
I only know somebody with an original diamond... that won't be much help for the hardware keyboard
I might still take a look at it when I get a chance to do so. I'll check out pocketpc.ch in the meantime.
Mr. HD said:
Many thanks for le TomTom cab link, I'll check this out soon and keep you updated.
[edit]: TomTom Install worked great. It is multilingual indeed. Thanx noigear!
Click to expand...
Click to collapse
You're welcome! I'm glad I could help you
Mr. HD said:
1st I lost TomTom. The maps are still available on storage card but the installation has gone an no cab file to restore it :-(
2nd I'm stuck on an French AZERTY keyboard! To solve this I beg you:
Click to expand...
Click to collapse
If you're talking about the Hardware Keyboard, you can change it easily to any map you like. To do that, using a registry editor, navigate to HKLM\HARDWARE\DEVICEMAP\KEYBD change th value of CurLang to 2055 for CH-DE
For any other keyboard mapping referr to http://www.microsoft.com/globaldev/r...p/xp-lcid.mspx and get the value listed for the desired language.
Don't forget to softreboot and you're done.
Hope this helps
And what about remaping not full keyboard layot but some buttons in any stations? (With Fn or Shift pressed).
Are Hardware Keyboard is sensible to PQwertyxxxxxx.txt files, or this mapping info is only for touch screen layot?
Owww god damned, I don't beleve it, the solution is sooooo simple (Sorry for my swearing, it's just emotional, lol)
Thank you a lot bluenote77 for this advise.
Unfortunately for vip77, I do not care at all for the touch screen keyboard so i'm not gonna spend more time as necessary to find an answer to the question. May be on my next vacation...
The absolut luxury at the moment would be if you guys knew a tweak for the SMS/MMS button on the keyboard, to call the SMS application by default...
Mr. HD, I'm talking about hardware keyboard, not screen virtual.
I want to remap digits from 1-9 in not english layout, because input of digits avilible only in english layot and not avilible in other language layot.
It's not useful.
@VIP77
All right, in that case, you might be able o perform a remap within the PQwertyxxxxxx.txt files. But I didnt figure out how they work and what kind of data (HEX or ALPHA) they contain.
I'm alway glad to have inputs about that.
Chears
Mr. HD thank you for this information. I spend alot time to find solution for this issue. My primary language is Russian, so every user of HTC TP have this issue. Also we can't input "." symbol. "Trick" is switching layot every time, when i need input digit or dot. It's owful.
Some peoples made new firmware, that have this fix, but they don't want talk about solution. And i don't want go to this version for some reason. I was trying change KbdNopAll.dll to new, from this firmware, but digit input disapiared from all layots.
So i have opinion, that some files or dll's may contaion addition info, not only KbdNopAll.dll driver.
Also i find program, that scan codes and can remap them from buttons and they have similar form. Like codes from PQwertyxxxxxx.txt
It's called AEKeyboard Mapper.
http://ae.inc.ru/aekmap.php
Problem - this software scan codes only in english layot. In russian on all keypresses returning only one code.
So i think I can scan button codes, find them in PQwertyxxxxxx.txt files and change or alias.
Something like this )
This sounds like a painfull job. I hope you will get an issue. in case you didn't see here's the link from my first post, maybe it will help you.
http://www.modaco.com/content/smart...obile-smartphone-internationalization-issues/
Update OK
i have correct my german Raphael with ceregedit, and in /HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/KEYBD/ i have set 2055 (German_Swiss ), and work fine!
thanks for the help!
Hi Mr. HD,
Don't know if you still need it or if it might be helpful but I have a backup of my old Sunrise stock ROM. Just send me a PM should you need it.
HTH
Cheers
Hello
I am currently cooking a ROM Fr WM6.1 but I can not define FingerKeyboard as the default keyboard. Ditto for FileExplorer, I wish TotalCommander default.
I guess anything goes in the reg but I don't even know where!
Last question, I don't know how to arrange the Start Menu before cooking.
Thank you in advance for any clue that the welcome