2020i: Upgradind rom, misadventures and happy end - PDA2, XDA IIi, 2020i General

Few days ago, I buyed my new Qtek 2020i. Two days spent playing with my new toy, then the decision: let's try to upgrade our baby.
Rule one: reading carefully wat's under your eyes could save a lot of troubles...
By the way, I'm not a judicious guy so I downloaded the rom for Qtek 2020 and NOT the one dedicated to 2020i (how little is that "i"!).
My bad luck made that the upgrading procedure - yes, I did it - warned me about the incompatibility between hw and sw only after it had erased the old rom. Result: device in comatose state.
Uh!
And now?
Finding an italian release of the rom for this device is more arduous than obtain an interview with the pope, so, the only way to resuscitate the zombie was intalling on it the english version...
Rule two: we, in Italy, say something as "wives and oxes have to be from your country", another way to say that it's better to manage things with wich you are in familiar terms...
OK, it worked, but... you can remark that my english is... a little defective. It does not appreciate my efforts and this feeling is shared by me...
First attempt: qtek 2020i is the same device as I-mate pda2, so I got a copy of it and tried to install ... it's not possible, sorry, says the message on the screen.
snort!
Rule three: audaces fortuna iuvat.
Looking for a way to get out of the scrape, I unpacked the executables of the two roms: the english version for 2020i and the italian version for pda2. I examined the files included and noticed that the composition was similar, so I decided to make an attempt replacing in the 2020i EN rom the ms_.nbf and the nk_.nbf files with the same ones I finded in the pda2 ITA rom. Made this, I launched the MaUpgradeUt_oID.exe and... wow! it runs!
Rule four: happy end.
now, my qtek 2020i works and speaks italian again. Actually, splash screen shows an I-mate logo... perhaps I'll find a solution for this...later.
Hope I have not bored you...
Bye
P.S.
ehm...new rom includes skype and kse truefax
I've upgraded radio version to 1.04.00 too

Related

T-Mobile 1.31WWE new ROM available?

Is T-Mobile 1.31WWE new ROM available?
I am not a techie, please help:
Using GetDeviceData.exe (wiki tools) I see (from DeviceData.txt):
PH20B 0 B WWE E T-MOB101 1.12.00 0 0 1.22.168 1.00.00 00.00
My extROM seems to be Italian, I need the English One as well.
2.
If T-mobile new ROM is not available yet, is there a way to install from Asian O2 (available and downloadable)? I ALWASY GET COUNTRY ID ERROR
Thanks and waiting
saulo866
rreally nobody can help me to solve this upgrade problem (country code mismatch) on my MDA III from T-Mobile WWE?
I heard that even xda tools cannot overcome the new encryption barrier which was incorporated into 1.31 ROM XDAIIi upgrade
Thanks and waiting
Saulo866
Just follow this link
jeez, so frustrated
hi, i have the exact same german make as the example in the link you gave has:
http://wiki.xda-developers.com/inde...x20.correctx20.upgradex20.ROMx20.forx20.mex3f.
getdivicedata.exe gave me the same thing,
i downloaded the same files in the links, and used the same fix.bat
the dos screen seemed to have fixed the files. but then i ran the baupgradeut.exe and it still gave me the country code error. i followed everything.
my only mistake was i started off with 1.12 wwe (came with the phone when i bought it off ebay) and tried to upgrade to 1.22---but the only on that worked was the german one---so no i got german 1.22 and i can't understand a thing. jeez,
but the instructions didn't work, anyway you can post your finished upgrade rom, that you used, so all i have to do is download and run the program?
plleeeezzzzeeee, with love :B
oh, i meant to say, can you, or may you, rather the the former
Look if you get a country code error then you have a country code error, its just that simple.
What devicedata shows you is what it finds on the phone, now if somebody flashed it before you got it of ebay, then that is what you get. It is maybe not what it was shipped as.
The German t-mobile is only sold as GER and has a QWERT keyboard. T-Mobile has sold a WWE version. (in other countires)
You are saying that yours was WWE, well WWE and GER are not the same.
So if you used the fix bat in the example like you said, then you tried to tell the device that it is GER and thus got a country code error.
I fail to understand how flashed it with a german version (which is not in the instructions of the posted link).
SO after all that, What do you want to do?
mdaiiiuser, thanx for replying. it's not that complicated. it used to be a german model, with german flash.
it was flashed befor i got it, i think in australia, with wwe 1.12.
and my dumb ass flashed 1.22 in german.
darn.
so, i'm lost and surfing aimlessly thru the internet for a solution. i alrady racked up a good 15 dollars in long distance bill to england today. i wll probably call germany tomorrow. but i must persit. lemme know if you OR ANYONe, has any ideas., thanx.
Boy would I enjoy not having to read this in every 2nd new tread.
Ok a reacp of what I understand.
You have a German MDA III with a qwertz keyboard. (that you got from bla bla).
You flashed it with a GER T-mobile rom using the ship.exe (and no fix.bat) which proves that the op and country code are good.
Its now in German and thus no good to you.
You are now trying to flash it with any WWE rom and get a country code error. This includes the I-mate 162 of wiki, which you have followed the steps to the letter and had no results.
Based on this my conclusion is the follwoing.
Your new GER rom has the new encription which means that what ever is checked is found at a different place than before thus the Country code error.
To prove this you need to run the Fix.bat against the GER rom and see if you get a header error (checksum or password). This in a OPEN dos window to beable to read it. Post your results if only for information reasons.
In the mean time I would redo the Imate 162 flash, drop the device number in the fix.bat and swap the postion of op and county code. (this is a hunsh never was able to prove it).
Post the name of the rom you used the fix.bat (relavant parts) and what ever you get as a message.
i started another thread, with COUNTRY CODE error, that outlines everything i did. maybe i didn't use the 162. i will try that now.
can you upload your modified files that you used? or email them to me, or exchange through im? please let me know, thanx.
i the original 1.12 and flashed that, and at least i have english now. but a german 1.22 external rom, lol.
WOOO HOOOOO
hehhehh, if anyone is bored enough to find my last 5 posts, you will find that, no only did i misflash my blue angel to german, but i didn't know how to fix it, and didn't know how to manage cab files.
i had a very limited understanding of my $800 cell phone.
because of this website, i found the only working firmware shipper, 1.12, and now i have flashed to 1.12, with and external cook of german 1.22, and wwe applications packages. i know how to upgrade the radio and bluetooth files, but don't see a need yet, the german 1.22 is working better than the stock 1.12 i had before. I'm content
i have learned, how to flash
how to use, manage external rom and cab files
downloaded a wealth of apps and knowlegde
thanks to the good people of this website
no i will proceed to donate some mula,dinero,okane,bani, cold hard glorious cash for my appreciation
this website and the community made my $800 mda worth it
thanx to:
beyondtheteck
mdaIIIuser
prophet,
and everyone else
:twisted: :lol:
IF THIS WEBSITE EVER HELPED YOU OUT OF A BIND, DONATE!
So now
maybe i didn't use the 162.
Click to expand...
Click to collapse
, well thats a great start.
Have fun, I give up
just donated 18 euros ($ 25 dollars -- thank you Mr. Bush for screwing up our US Currency).
if i had more, i'd give more---would you all consider $18 euros enough?
hence, my 1 DONATION STAR YEEEEE
Dear GCPreda
Yes, not being a techie, I also would very much appreciate if someone, with our same setup, (MDA III T-Mob Ger) could work out a fully functional 1.31 WWE ROM + ExtROM to simply download (from anywhere, any ftp site) and launch.
I know I am asking too much, but I still hope
Thanks
Saulo866
does someone knows where to download the latest ROM and ExtROM for
MDA III T-mobile WWE
or
MDA III T-mobile ENG
Thanks a lot
saulo866

UK/DK/FR ROM 2.8.7.102 with AKU2/A2DP/Push Email update

I just noticed that a new ROM was posted on buzzdev that includes AKU2 finally!!
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,243/
It's in french, but I don't mind as I'm fluent in french At least it's a start...
The version is 2.8.7.102 with radio ROM 1.13.10, but the file date is december 5th 2005 inside the EXE. Seems rather old... 2 months old...
I just want to know if anybody tried it so far and what are the improvements. I know it should have stereo bluetooth and push email, but anything else interesting? I already did an 1.6.7 update a few weeks ago, and reinstalling every program is a PITA... I wish we could do an update without hard resetting... or is there a good backup program that is actually restoring programs and registry in WM5?
Edit:
After some quick replies from you guys, it seems to be a working test version released for the Qtek 9100. So before using it, you must unlock your device if it's not a wonderfull Qtek, but you knew that It does work, but there might be some issues (like memory leaking, etc.) similar to a beta version. It's dated from december 5th 2005, so not the latest, but must of us here don't mind since it's finally AKU2 for the wizard!
It didn't took too long for someone to appear with an english ROM, impressive. Kudos for the original poster on buzzdev and to the poster of the english and danish ROMs. Now we can all enjoy it. How long before other languages pop up?
Now onto the files:
Just a reminder to users of devices that AREN'T a Qtek 9100; you must unlock your device before a ROM update. You can use the following tool to do so :
http://forum.xda-developers.com/viewtopic.php?t=33796
French ROM
ftp://xda:[email protected]/Up...U_Prodigy_2080702_102_11310_QTEK_FRA_Test.exe
English ROM
ftp://xda:[email protected]/Up...U_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe
Danish ROM
ftp://xda:[email protected]/Up...U_Prodigy_2080707_107_11310_QTEK_DAN_Test.exe
It could be good working version, haven't test it but in this article: http://www.pocketinfo.nl/artikel/5101 (it's in Dutch) it clearly shows the same date as you mentioned.
However, I would not recommend doing a rom update en then backing up old reg key's since they could easily have been changed by the upgrade.
There is sureley no way to turn this ROM into an English one? :twisted: :evil:
This is great news. Anyone whose french is fluent installed this already? Please leave feedback.
macrinus said:
This is great news. Anyone whose french is fluent installed this already? Please leave feedback.
Click to expand...
Click to collapse
The filename contains "TEST" keyword, is it reaaly beta-test or what? I don't wanna download ~50 Mb just for testing and my EDGE can't be distinguished from usual GPRS for now ;-(
French
Works fine !!!! And fast !
No bugs for the moment.
Does it include Direct Push?
I didn't tested it
I had to do a hard reset anyway today because I didn't set a link correctly at startup for the OMAP overclocking utility, so I decided to give this ROM a try. Seems to be a full ROM and I only see a note on the startup Qtek image that says "Test only, not for sale". There is a new WM boot image too. The ROM seems pretty responsibe, but maybe it's just the hard reset
I don't have a stereo bluetooth headset to test it and I'm not able to find the settings for the different profiles, maybe I need to pair a headset first to set the setero profile. I'll look into the new jabra or the moto as I was waiting for the AKU2 update with A2DP to buy one.
So far so good...
I decided to pair the Qtek with my computer to test the presence of A2DP and I was able to discover the stereo profile!! So next is to test for push email... maybe tonight...
Survivant said:
I decided to pair the Qtek with my computer to test the presence of A2DP and I was able to discover the stereo profile!! So next is to test for push email... maybe tonight...
Click to expand...
Click to collapse
Could you please include some screenshots?
Screenshot added
This ROM supports A2DP. This Rom doesn't support push e-mail. This is not the last ROM version. 2.x.x.x ROMs exist for already 2 months. There is at lest one another language for this ROM.
New big date\time panel looks fine.
[CpD said:
bob]This Rom doesn't support push e-mail
Click to expand...
Click to collapse
Yes it does!
Although I don't speak French, I just had to try out this ROM. I configured server based ActiveSync e-mails came in automatically.
I also used ActiveSync web admin tool (http://www.microsoft.com/downloads/...23-D145-4DBF-A2CC-E0B4C6301453&displaylang=en) to wipe the device remotely. Strange thing is that device asked for my confirmation. I don't know what the message meant, but I guess it's because of the beta version.
hmm please let me know if this software really works.. I am currently waiting for my memory card to arrive and until then, i cant copy the file into my vario.. my max capacity is only 45MB and the file size is 55MB
by the way, if i install this update, will my vario will be in french as i cant read french!
[CpD said:
bob]This ROM supports A2DP. This Rom doesn't support push e-mail. This is not the last ROM version. 2.x.x.x ROMs exist for already 2 months. There is at lest one another language for this ROM.
New big date\time panel looks fine.
Click to expand...
Click to collapse
Can we have a screen shot of the new date/time panel???
just started a new post after installing the new rom, and it works with he ht820 stereo h/s
http://forum.xda-developers.com/viewtopic.php?t=40551
Ok listen up, we need some help. Some people are working on a WWE version of this rom. But we need to have an image in .nba format.
Would someone be so kind to back this baby up using Awizard backup tools and put it on the server (contact me if you need some space!)
Thanx
(ps admins sorry I won't crosspost this anymore!)
as i type i am slowly uploading a zip called nba.zip which fingers crossed will have what is needed
please note i am a novice at this so sorry if anything is wrong
the files should be complete by 2:00am ish
emmeborn said:
[CpD said:
bob]This ROM supports A2DP. This Rom doesn't support push e-mail. This is not the last ROM version. 2.x.x.x ROMs exist for already 2 months. There is at lest one another language for this ROM.
New big date\time panel looks fine.
Click to expand...
Click to collapse
Can we have a screen shot of the new date/time panel???
Click to expand...
Click to collapse

Qtek French ROM for Alpine (and others) from Astel.be

Hi guys, et salut les francophones !
Just thought I'd inform you that there's a Qtek ROM available from ASTEL for the Alpine in French (link here) . It's a 1.11.02 ROM / 1.02.00 Radio / 1.11.115 Ext, so it's not the latest (esp. for Radio ROM). You might need MaUpgradeNo_Id.exe of course.
I've been using it for a while. There was a glitch with Bluetooth and the simultaneous use of a handset + GPS, but since TomTom was probably to blame too, I'm not so sure. Try it if you like.
The French translation is OK most of the time, but not 100% accurate. And there's a white pixel in the splash screen that seems totally out of place but that's not really a problem now is it ? Edited splash screens are so trendy these days ...
I don't know what's in 1.11.02 that wasn't in 1.11.00, I'll let the gurus here check it out. It's also available in English. There are plenty other ROMs in there too. Enjoy.
Cheers,
Mr_Smoke
PS : Edited the link to include [email protected] information. That information was not at all secret, it can be found here.
mm...and what about login\pass? it's protected...=(
Ah, my bad ... editing the link so as to include the password straight away ...
Cheers !
still doesn't work ((
Well, "it works for me" (tm)
Try clicking the link on the "source" page, in my PS ...

Latest ROM for swedish Qtek 9100?

Hi all.
I´ve searched and searched but havn´t found either answer or file regarding my question.
I recently bought a used Qtek 9100 (still have warranty thou) and it has all the standard bugs of the old ROM. The ROM version I have in my unit is:1.3.7.13 SVE which obviously is an old one.
I´ve tried registering on the myqtek site to get the latest update ROM but without luck since my unit isn´t delivered by the Brightpoint corporation apparently. I´ve been in contact with Daangard as well who also wasn´t the deliverer. My only option then is to send it back to the original store where it was purchased and get it done thru warranty, but that will take around a month since the store is not in my town and due to service time etc. Obviously I don´t want to be without my phone for a month just to upgrade the ROM. I also don´t want to use any of the english versions since I want my regular swedish keyboard. So if anyone knows where I can download the latest swedish or scandinavian ROM (SVE) I would be extremely grateful!
Thanks!
Quite strange that neither Dangaard nor Brightpoint knows it if it's from Sweden.
Anyway; I will upload the latest Swedish one, 2.17.7SVE, to the upload section of the ftp site here and post a link here when done.
OK, here it is: ftp://xda:[email protected]/Uploads/188177-9100_upgrade_2[1].17.7.103sve_radio_2.07.10.zip
Yes, it´s very wierd. At Daangard they said that if you for instance buy your unit thru webshops that is regsitered in sweden but operate from a different country, this can happen, and he mentioned expansys as one of them that operate from england but have a base here in sweden as well. My phone is bought thru a store called My Telecom here in Växjö Sweden (I live very far from Växjö), and I apparently have to send my phone to them first, and then they will send it to their support place!! And they said it could take up to four weeks!! Four weeks for a simple ROM update!!
Anyway, I really appreciate if you can upload the latest SVE ROM update for me so I can see if my problems with the phone being VERY slow and that it hangs from time to time and re-starts by itself etc etc..
Thanks in advance!
Thanks a lot, I was typing this as you updated your post! Will download it now! Thanks!!
steeth said:
Thanks a lot, I was typing this as you updated your post! Will download it now! Thanks!!
Click to expand...
Click to collapse
ftp://xda:[email protected]_2170701_21707103_20710_QTEK_SVE_Ship.zip
on the server........
Installed this latest ROM file yesterday, and I can´t believe how much better my Qtek 9100 performs now! Totally outstanding! Only been using it yesterday evening and today, but still, no hang ups whatsoever (used to be 10 times per day), no slowness at all, all menus open fast and it feels like a faster processor in it bascially even thou it´s not.
So thanks a lot again! I´ve gone from pretty much disliking it and wanting to sell it, to wanting to keep it because it performs so well!
Thanks!!
Vilem said:
ftp://xda:[email protected]_2170701_21707103_20710_QTEK_SVE_Ship.zip
on the server........
Click to expand...
Click to collapse
where can i find this ROM today?
And can i use this on a G4 Qtek 9100?
Does it support A2DP
BR
Markus
Vilem said:
ftp://xda:[email protected]_2170701_21707103_20710_QTEK_SVE_Ship.zip
on the server........
Click to expand...
Click to collapse
i can't download it there
And is that a G4 rom??
BR
Markus
agegbg said:
i can't download it there
And is that a G4 rom??
BR
Markus
Click to expand...
Click to collapse
I want the newest Swedish ROM for Qtek 9100 too, please upload it. Or can I run wm6 with my Swedish keyboard? I have search for it and found that it shoulden't work, but maybe there are a new release? Thanks!
dole_95 said:
I want the newest Swedish ROM for Qtek 9100 too, please upload it. Or can I run wm6 with my Swedish keyboard? I have search for it and found that it shoulden't work, but maybe there are a new release? Thanks!
Click to expand...
Click to collapse
Actually I don't think there is such a thing as a 'Danish' or 'Swedish' keyboard, but rather a 'Nordic' with both Danish/Norwegian and Swedish special characters, and the reason for this is that I have a Qtek 9100 where the keyboard in addition to the Danish æ, ø and å also has the Swedish ö and ä.
I have WM6 on this Qtek 9100 and have all the Danish and Swedish characters in their proper place on the keyboard, so if your keyboard is the same as mine, i.e. it has öä + æøå, then all you have to do after installing WM6 is to make a simple registry modification to have these characters in their right place.
The registry modification is to add a String value Locale="0414" under the key HKCU\ControlPanel\Keybd
This is also what you would have to do if you intall e.g. a WM5 WWE rom.
I also have a 2.17.7 WM5 SVE rom with a 2.61.11 radio, and I can upload this one to Rapidshare, but I'm afraid that it won't be before sometime during the weekend. This rom is a G3, so if you want to install it but have a G4 device, then you should have a look here: http://forum.xda-developers.com/showthread.php?t=293480
Edit: Just saw a picture of a Qtek 9100 in the Swedish part of myqtek.com, and this one had a different keyboard than mine, i.e. it had ø, å, ö and ä but apparently no æ, so it seems there are different version of keyboards with the Scandinavian special characters after all, and I'm not sure that setting the Locale to 0414 will work with all of them: http://forum.xda-developers.com/showthread.php?t=258301
Finaly I got found a working IMEI number, so I registered on myqtek and downloaded the latest ROM. So here it is: http://shadowcrew.se/keygenmusic/188177-9100_upgrade_2.17.7.103sve_radio_2.07.10.zip
dole_95 said:
Finaly I got found a working IMEI number, so I registered on myqtek and downloaded the latest ROM. So here it is: http://shadowcrew.se/keygenmusic/188177-9100_upgrade_2.17.7.103sve_radio_2.07.10.zip
Click to expand...
Click to collapse
Is this a G4 ROM?
/Markus
agegbg said:
Is this a G4 ROM?
/Markus
Click to expand...
Click to collapse
No, it is for G3
agegbg,
Anyway you could upload that rom again? I am also looking for the latest qtek 9100 swedish rom but all links are doa.
Thanks,
Tone
lts said:
Actually I don't think there is such a thing as a 'Danish' or 'Swedish' keyboard, but rather a 'Nordic' with both Danish/Norwegian and Swedish special characters, and the reason for this is that I have a Qtek 9100 where the keyboard in addition to the Danish æ, ø and å also has the Swedish ö and ä.
I have WM6 on this Qtek 9100 and have all the Danish and Swedish characters in their proper place on the keyboard, so if your keyboard is the same as mine, i.e. it has öä + æøå, then all you have to do after installing WM6 is to make a simple registry modification to have these characters in their right place.
The registry modification is to add a String value Locale="0414" under the key HKCU\ControlPanel\Keybd
This is also what you would have to do if you intall e.g. a WM5 WWE rom.
I also have a 2.17.7 WM5 SVE rom with a 2.61.11 radio, and I can upload this one to Rapidshare, but I'm afraid that it won't be before sometime during the weekend. This rom is a G3, so if you want to install it but have a G4 device, then you should have a look here: http://forum.xda-developers.com/showthread.php?t=293480
Edit: Just saw a picture of a Qtek 9100 in the Swedish part of myqtek.com, and this one had a different keyboard than mine, i.e. it had ø, å, ö and ä but apparently no æ, so it seems there are different version of keyboards with the Scandinavian special characters after all, and I'm not sure that setting the Locale to 0414 will work with all of them: http://forum.xda-developers.com/showthread.php?t=258301
Click to expand...
Click to collapse
how do you modify the registry?
kryXorange said:
how do you modify the registry?
Click to expand...
Click to collapse
there are tools to do that. Make a search (PHM regitsry editor) and read the Wiki...
Put back the swedish rom!
"I also have a 2.17.7 WM5 SVE rom with a 2.61.11 radio, and I can upload this one to Rapidshare, but I'm afraid that it won't be before sometime during the weekend. This rom is a G3, so if you want to install it but have a G4 device, then you should have a look here: http://forum.xda-developers.com/showthread.php?t=293480"
Yeah but you never put the link to rapidshare for the SVE rom
Really need it now, all characters on the keyboard are ****ed up!
It' s really lousy of Brightpoint and Daangard taking monopoly of the SVE roms, screw them. load them up!
Klaako said:
"I also have a 2.17.7 WM5 SVE rom with a 2.61.11 radio, and I can upload this one to Rapidshare, but I'm afraid that it won't be before sometime during the weekend. This rom is a G3, so if you want to install it but have a G4 device, then you should have a look here: http://forum.xda-developers.com/showthread.php?t=293480"
Yeah but you never put the link to rapidshare for the SVE rom
Really need it now, all characters on the keyboard are ****ed up!
It' s really lousy of Brightpoint and Daangard taking monopoly of the SVE roms, screw them. load them up!
Click to expand...
Click to collapse
If you want your hardware keyboard to act like a scandinavian one just follow this simple guide: http://forum.xda-developers.com/showthread.php?t=281441&page=2&highlight=swedish
The registry editor was a reaaaal pain in the ass to find so i'll just link it to you! http://www.buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,27,15027,page=1
That's TaskMgr.. I find it very useful and it also has a built in regeditor! good luck (if i understood your problem correctly that is )
Thanks!
Great, thanks!
I installed the regeditor and found the right place to add the string, but i'm not that great in editing the register so what kind of value type should i choose? I got lots of different choices; REG_SZ, REG_DWORD, REGMULTI_SZ etc..
Would be greatful for a howto guide
Klaako said:
Great, thanks!
I installed the regeditor and found the right place to add the string, but i'm not that great in editing the register so what kind of value type should i choose? I got lots of different choices; REG_SZ, REG_DWORD, REGMULTI_SZ etc..
Would be greatful for a howto guide
Click to expand...
Click to collapse
It'z REG_SZ..

Blue Angl Wm6 6.1 or 6.5 German

Hi I am searching for Windows Mobile 6, 6.1 oder 6.5 in Englich the language Pack from helmi didnt translate the os .. The os is not bootable after apply
Need Help
yeah, the only rom the language pack works for, is helmi's own wm6 rom.
since there are no other wm6.X roms in german on this forum or anywhere i looked, i will start development for my own wm6.5 in german. personally, i don't want a german rom, but since i am one of just few german senior members here, and people request those roms, it would be pretty nice to have them floating around, but at the moment i just can't spare the time to translate a rom (plus i've never done it before and have to read a hell lot before i can do it).
so you might wanna stick with one of the good wm6.5 builds, like xplode's, or sun_dream's, or swampy's
wmobile in german to english or spanish
Hi! I´m new in the forum, please i need some help, i have a qtek 9090 bought in germany so it has a windows mobile in German. Can you help me to change the ROM to an english or spanish version.
The info is:
ROM version: 1.40.01 GER
ROM datum:03/10/05
Radio version: 1.12.00
Protocol version 1337.42
Extended ROM version: 1.40.750 GER
Model: PH20B
Platform: PocketPC
Can you explain me step by step or suggest me a page wuere i could find some instructions, i have another problem too, I don´t have a usb cable for it, please help me
hi, welcome to the forum!
1. i wouldn't have posted the imei, if i were you. it does not help is the process and is rather private information. maybe you want to edit that, since it is none of people's concerns, it would be like posting your phone number in clear text.
2. it is no problem at all, "switching" languages. it might not be as easy as flipping them like on a normal mobile phone, since you need to flash a different rom, but it is easily doable. but before i explain that, let's go to #3
3. you problem is, that you don't have a usb cable. you really need a usb cable or cradle to flash another rom, which again is necessary to get another language. so your first task would be to get your hands on a cable or cradle, before that, you can do nothing about that. have a look at ebay or e-shops in your country or region.
i will not go into detail now, because the entire process of flashing the device must seem awfully theoretical for you at the moment, but to give you something to read:
-=here=- you can download the different wm2003 roms in different languages.
-=here=- you can find newer roms, since you are not restricted to wm2003, maybe you also want to concider wm6.5 for nicer optics, finger friendliness and third party app compatibility.
-=here=- you can find information on how the upgrade process works in detail.
and finally -=here=- you find a lot of information for beginners with the device.
please make sure to first get a cable, then please post back, and we will discuss further questions about the actual process of flashing.
with best regards,
Chef_Tony
Thanks!
Thanks a lot !
I couldn't find any help until I arrived here, ok so I'm going to work in the USB cable, and I'm going to read all the articles.
I will post back as soon as i get it, thanks for your help and congratulations for the forum Chef_Tony.
Vanpliego

Categories

Resources