Related
yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.
Hey Guys....
I am still working on this DIY but this is how I was able to accomplish reverting back to my OEM Cingular 8125 state.
If someone could plase let me know how to replace the very first SPLASH Screen from "HTC" to CINGULAR, I would greatly appreciate it.
By following the steps below, you will have almost everything back to its original state.
Be sure to download all the necessary ROM files: OS ROM, Radio ROM, splash.bin
Place your OS ROM and Radio ROM inside the c:\sWizard\ROM folder.
DOWNGRADE YOUR OS AND RADIO ROM
1. Download aWizard 1.3b Beta Version (Attached File or Latest Version) from the following link: http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard
2. Unzip the folder to your root directory (C:\aWizard or D:\aWizard). You need to avoid having spaces your directory name. This is the reason placing folder in the root.
3. Make sure you have an active connection via Active Sync.
4. Run the aWizard.cmd file from C:\aWizard
5. Run "e" command FIRST !
6. Run "u" command. Your Wizard will reboot.
7. Run "w" command to update your ROM. You will get a prompt to choose your ROM. If you did not place a valid ROM inside the ROM folder, then you wont see it from this list. Also, if you placed your aWizard in other directory with spaces (i.e C:\ MY DOCUMENT) then you wont see it either. Just let it run. It will take close to 20 minutes. At the end, it will as you to hard reset.
8. Run "r" command to update your Radio ROM. Same as Step 7.
Replacing Splash Screen (Back to Cingular)
1. Place the splash.bin file inside the c:\aWizard\lib
2. Open up CMD and navigate to c:\aWizard\lib
3. Type in the following command "pdocwrite.exe -n 1 splash.bin 0x002d0000"
pdocwrite.exe = this program is located inside the LIB folder
splash.bin is a file that I converted.
4. Once completed, please reset your Wizard and now you will have Cingular's Splash (2nd Splash)
Updating the EXT ROM
1. I did this manually by utilizing Active Sync to copy over all the Cingular ROMs to the Wizard and running it individually.
2. Reset and you will now have all the programs Wizard came with.
FAQ
Q. My Wizard is stuck on a splash screen and it wont do anything.
1. Hard reset your Wizard
2. Hold onto Camera Button while turning on the Wizard and you will get the boot screen.
3. Plug in your USB Cable
4. Run one of the known ROM files with .exe extention. When this happened to me while downgrading,
I had to reload the latest iMate ROM.
5. Start the downgrade process again by following the above instruction.
reverting back to original cingular rom
Thank you for this.
Don't you have to REINSTALL original Cingular Rom or does this do that by removing imate updated ROM?
js
Re: reverting back to original cingular rom
urologyhealth said:
Thank you for this.
Don't you have to REINSTALL original Cingular Rom or does this do that by removing imate updated ROM?
js
Click to expand...
Click to collapse
When you install Cingular ROM, it will remove/overwrite the existing iMate ROM.
Be sure to place your ROM files in the the ROM folder.
If your running the aku2 imate rom, many people will have problems running awizard or lokiwiz to unlock the CID, I had to run the tmo uk rom update (.exe one) which replaced the imate, and then restore the rom files I had backed up for cingular, although the extended rom is still locked, thats annoying.
jvanbrecht said:
If your running the aku2 imate rom, many people will have problems running awizard or lokiwiz to unlock the CID, I had to run the tmo uk rom update (.exe one) which replaced the imate, and then restore the rom files I had backed up for cingular, although the extended rom is still locked, thats annoying.
Click to expand...
Click to collapse
can you please share how you change the very first splash screen on your 8125 ? its the only thing i wasnt able to do or know how to do.
thanks
FarSeide, I'm pretty sure that even the stock 8125's from Cingular showed the HTC screen first, the cingular screen second, and finally the Windows Mobile screen. If that's the case, then your 8125 is as good as new as far as Cingular is concerned.
Also, if anyone upgraded to the AKU2 I-mate ROM, you cannot do the process you described, because (as someone else mentioned) the lokiwiz program will not work. What you need to do is FIRST install a different ROM using an exe file (a good example would be the leaked AKU2 Q-Tek ROM exe file), and only after that entire upgrade process is completed, can you now use lokiwiz to unlock the SuperCID and install the Cingular ROM.
kingbear2 said:
FarSeide, I'm pretty sure that even the stock 8125's from Cingular showed the HTC screen first, the cingular screen second, and finally the Windows Mobile screen. If that's the case, then your 8125 is as good as new as far as Cingular is concerned.
Also, if anyone upgraded to the AKU2 I-mate ROM, you cannot do the process you described, because (as someone else mentioned) the lokiwiz program will not work. What you need to do is FIRST install a different ROM using an exe file (a good example would be the leaked AKU2 Q-Tek ROM exe file), and only after that entire upgrade process is completed, can you now use lokiwiz to unlock the SuperCID and install the Cingular ROM.
Click to expand...
Click to collapse
Eli,
thank you for the info. I wanted to put this together because when I tired to do this, there were information but scattered all over all forums. just wanted to help others so that they dont go through the same thing i did.
i was following these instructions and i got a
NOTIFICATION ERROR
cannot execute repllog.exe
so what i had to do was hard reset, boot screen , re-installed imate, ...
i guess i will try it again, what do you guys think
hmmm... sorry to say but my 8125 only ever showed the cingular splash. No HTC, no WinMob. I had assumed that Cingular somehow replaced all 3 splash screen with theirs.... In fact, I never even knew there was more than one splash screen until I upgraded to the Qtek rom.
I'm in trouble
I tried to downgrade the ROM and now I'm hung in the i-Mate SPLASH SCREEN. I tried the hard reset and it hangs every time. I can't get a connection through active sync obviously so what are my options. How can I get a working device.
I'm freaking out.
Please HELP!!!!!!!!!!!!!
Re: I'm in trouble
hellomoto_25 said:
I tried to downgrade the ROM and now I'm hung in the i-Mate SPLASH SCREEN. I tried the hard reset and it hangs every time. I can't get a connection through active sync obviously so what are my options. How can I get a working device.
I'm freaking out.
Please HELP!!!!!!!!!!!!!
Click to expand...
Click to collapse
relax... i was exactly where you were...
first, hard reset your device.
Hold the Com Manager, Voice Command and press the soft reset with your stylus.
before you turn the device back on, hold the camera button then turn on the power. you will receive the boot screen. Plug in your USB Cable and kick off the EXE file. Load one of the known ROMS like the iMate ROM.
reload and try again. I am willing to bet that you disconnected the USB Cable while updating to Cingular ROM.
Good luck and dont worry.
does anyone have the exe for the original Cingular ROM ?
my colleague tried to update his 8125 with my imate rom.....and did not unlock it first.
all he has is the bootloader now, the update gives the well known Error: Invalid Vender ID
Any help is greatly appreciated
Thanks !!
Get a copy of the proper ROM on a SD card, and reload it that way.
This is the easiest way out of that box......
Thanks,
but how to get the Rom reloaded from the SD card onto the device using the bootloader ?
dirty_harry said:
Thanks,
but how to get the Rom reloaded from the SD card onto the device using the bootloader ?
Click to expand...
Click to collapse
THAT part is easy.
Note that the SD card image is NOT a file. You have to raw write it onto the card, which will destroy the filesystem - so back up the card first! psdwrite will do the job. You also need the image (PREVIOUSLY copied from a SD-made backup with "psdREAD")
To restore it, insert the card, hold the CAMERA button, and power on. The phone will tell you to press VOICE to restore the SD image (it looks to see if there's a valid one in there)
Note that with 1.x bootloaders this will happen with the BACKLIGHT OFF, and you only have 3 seconds or so to press the key - so have a flashlight handy. 2.x bootloaders turn the backlight ON.
Hit VOICE. The image will be verified (checksummed) and if it is good, it will be loaded.
That's it. Takes about 2-3 minutes. When it finishes it will tell you to press any key, and when you do you'll end up at the tricolor screen.
Power off and back on, and the phone will cold boot the new image.
This will work even if you can't run an RUU loader, so long as you can get that first prompt up. It is a VERY effective rescue method.
IMHO before you hack on the firmware in these things you should make an SD card backup just for this reason.
Which tools is best option for ROM backup to Mini SD?
Hi,
Just read your message about writing ROM to Mini SD card.
I'd like to do just that.
I want one or two ROM's for safekeeping stored somewhere instead only a backup or official copy on my pc.
As i've read restoring from SD is safer and faster..
I don't intend to use the SD card for anything more than just that.
In the Prodigy Service Manual (Prodigy Service Manual -XA(0813-2005).pdf) HTC uses mtty.exe. There are also instructions in the PDF.
Since HTC uses this, it should do exactly what i want, i guess?
Or is there a better tool?
Thanks,
Allegro.
P.S: Will a restored ROM from Mini-SD look fresh to HTC?
Or will they see it's a self restored copy instead of a official HTC restore?
Will it reset "everything"?
I was able to fully restore CIngular 8125 ROM, EXTROM, All Splash Images using the SD Restore.
100 Cingular OEM Spec has been restored...
I hv updated T Mo custom ROM..but now can't downgrade even by Awizard utils....can any one throw some light on this?
Hey guys, before anything please let me thank you for this amazing site. You have made a complete n00b to a power-user in 2 days flat. Please do allow me to tell you my story. 2 Days ago I got this thing called O2 XDA IIs (HTC Blueangel) and I got it for around 300US$ (Unlocked/New) was not so fond of Windows devices so intended to sell it off asap and get some other phone, was just doing a little R&D on the net to see what all is available for this thing. When I came across to your site, here's when I got so intregued by the capabilities of this thing.
First I intalled the latest ROM for my device, after getting little confidence I installed WM5 with my fingers crossed. Its all done now but have a few things to ask you guys.
1. When you mentioned about the EXTROM you said that you'll have to copy the files on the StorageCard\ExtRom when all I did was copy nk.nbf into the folder called WM5_Pack_V3 and ran the installer. I did run the batch file to get the oper_code from the DeviceData file. It was all done, I was really scared but now am worried did I do the right thing?
The Device Information TAB shows
ROM Version : 5.03.02WWE
ROM Date : 03/02/05
Radio Version : 1.12.00
Protocol Ver : 1337.42
ExtRom Ver : TuMa v1.3
2. It took me long enough to install this what all tweaks should I do to it so that it stays at the maximum bug-free current stage. (Hope you get me)
3. I need the starting screen to display something other then those scary 3 colored lines
Some things that I noticed after upgrading:
1. WM5 It's a little slow, but definately much better looking and show-off value.
2. I have a Wi-Fi enabled ADSL router at home by which I connect the O2 and other devices its working fine on.
Any help/suggestions/comments are welcome.
A brief intro for me would be have worked as a beta tester for many symbian application providers, was a complete S60 geek and am majorly into bikes & bike photography
Nothing said yet?
Im not sure I understand that whole Extrom deal, but what I can say is that the files that were in the extrom folder inside the upgrade pack must be put in the storage card in the same folder, but that is only if you want MMS and have a camera, if not, then there is nothing to do, unless you edit the Cfg.txt to load all your apps and settings after a hard reset. I guess that if you are able to use the device, you did everything ok as far as the flashing goes. it is a little slow, but its come a long way from the first versions, those were slow as hell, thanks to Mamaich and Tuatara and everyone else this version is running great!
as for the 3 color bar start up screen, there is nothing you can do about it...
Yeah I really forgot to thank Mamaich and Tuatara for their awesome work, now I am really scared as I dont like the slow response and am unable to downgrade. ActiveSync shuts down whenever I try to run the MaUpgradenoID.exe file activesync stops and it is giving errors in connecting, gets DC frequently. And moreover the Manufacturer supplied upgrade is also not working it gives a CountryCode error. Am really confused and scared now what to do?
Well I did not get any help but with loads of tinkering I got the thing done, I wanted to know why was WM5 so slow, otherwise the interface is loads better then the current CE I am using.
I have the Cingular version SX66 Blue Angel. I was able to update it without any problems. Usually speed is very different with those who flush the registry and with those who don't. Make sure you flush your registry after you completed the update.
Mine is faster and way more stable than the other version I had on it. Remember to follow all instructions exactly. if there is a link you need to check and make sure you do the format, change the ram size on the device, then upgrade.
There are no instructions on how to flush the registry can you enlighten me on this?
manav said:
There are no instructions on how to flush the registry can you enlighten me on this?
Click to expand...
Click to collapse
During the flashing process, the wiki instructs the user to do a hard reset
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_HardReset
You should answer NO, YES, YES to the boot questions.
Hmm yeah, I did do that. And just am in the process of downgrading from the buggy WM5. It doesn't work out for me.
and THAT'S where I got problems!
in the manual, it says I have to download my latest favorite ROM version, and FROM that file i should copy the nk.nbf the "DOWNGRADE TO WM2003SE" folder..and that's what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get the nk.nbf file out of the Rom-update .exe file..?
help
well some were in the same documentaion it should also say use rar or zip to unpack it (being the exe file).
Pls spend some time in wiki you might find some other answers
yeah i had tried that already back then butthat didn't work either..when i try that it still just starts running the program.. :?
Try these instructions with your exe file:
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??
OK. Decided to upload a new ROM as my phone was getting slow and unusable.
It's an O2 XDA (Touch Diamond) with:
Touchflo v3 Build 29946
ROM 1.93.206.6 WWE
09/08/08
Radio 1.00.25.05
Protocol 52.29.25.12H
Boot R1.00.25.05
I downloaded Olinex's unsigned developer Hard SPL and I extracted the NBH file and renamed it DIAMIMG.NBH following the advice here:
http://forum.xda-developers.com/showpost.php?p=2707841&postcount=4035
On soft reset I pushed the vol down and back buttons to get the boot loader stripes, then let go.
I now have a screen which says "Loading..." and has done for 20 minutes. I have now got the phone on charge while I wait for some help to see what to do next, just in case this is a critical stage - don't want to brick it.
Reading through again I am concerned that this was a procedure for rom upgrade not Hard SPL install, can someone tell me please?
Thanks in advance for any help.
Well, I ended up taking the battery off to get it to reboot. It seems to boot fine back into the old ROM.
I still intend to upgrade it (to SwiftBL's v7.5) but have a few questions:
1. Can the HardSPL be run from the internal storage card? If so is it simply running the exe from the unpacked zip from within a folder? ActiveSync is a bit too flaky for me.
2. Do I need the SIM card in the phone at any stage of the ROM upgrade?
3. On the original ROM I get a drop down menu to setup the phone to the UK O2 network settings. If I load a new ROM, will I need to know these settings?
Cheers
1. HardSPL cannot be run from storage. Only Activesync or Bootloader
2. No. You can flash without SIM card
3. You can use connection setup on any new ROM. Usually starts straight after initial setup.
OK here's where I'm at now.
Downloaded jockyw2001's HardSPL 1.24
Ran it and it got as far as prompting me to run on the phone. I said 'Yes' and the HTC screen went black as expected.
Next stage was to run the DiamondCustomRUU.exe file which I did but this is waiting for ActiveSync. ActiveSync will not sync with the phone now, I guess because the phone is not 'on'?
Where do I go from here?
Use the Hard-SPL in my sig with your RUU.
Thanks, will do (it's not the one mentioned in the ROM author's description though).
So how do I recover the phone from the black screen now? Is it safe to remove the battery to reset?
Battery pulled after reading this post:
http://forum.xda-developers.com/archive/index.php/t-427945.html
I'll try the SPL you mentioned now.....
Had a good search but can't find out. This Olinex zip contains just one file RUU_Signed.nbh.
Where do I get the other files from to run this?
use the attached . It has the RUU exe and the nbh.
Thanks. This is a signed version I see, was going to use SwiftBL's ROM which requires unsigned.
May take a look at other roms that use signed unless you think that I can load the SwiftBL rom with this version?