Hi folks!
Is there some kind of step by step manual how to get to a working solution for the well known BlueAngel Problem with it's headset connections?
I found a thread talking about some registry tweaks, but that only enables the menu option to send the sounds to the headset, but finally doesn't produce any sounds...
What I want to have is the instructions, given by the Navigon Mobile Navigator 5 beeing transferred to a bluetooth device (a parrot free speach device or a logitech headset).
I am already running ROM 1.4 and tried all various BT versions, but nothing worked..
Thanks for your help,
Balu
err.. I am looking for using bluetooth headset to listen mp3 as well, any help and suggestions? :wink:
im trying to figure out how to do that aswell, (listen to media player using bluetooth on my SVP m2000)
me too is there any idea pls
same
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
mamaich said:
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
Click to expand...
Click to collapse
Can you please provide the list of BT headsets (with make / model numbers) that supports this "advanced audio distribution profile"
ht820 does the job!
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
I upgraded the BT stack to 3900 and radio to 1.13 and added the extra profiles (instructions are in the Wiki), and it appears to work as both .
When the phone rings, WMP pauses and the left headset button answers the phone. Once you finish the call and hang up, WMP starts playback again.
The only problem that I still have is with intermittent dropout of the High Quality Audio. Anyone got any clues on curing this?
Got mine for around £60 UK sterling.
Is this an hardware limitation? Is this a ROM limitation? BT stack problem?
GSM phone preempting BT handfree?
If not HW, can we expect an upcoming solution to this?
Or, the only "hard" workaround is to plug a BT adapter (like Jabra A210) to redirect mike/spkr, and to desactivate BA BT.
Christmas tree, like.
Re: ht820 does the job!
woodrjh said:
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
Click to expand...
Click to collapse
Thanks for the Info.... does the HT850 also supports MP3 playback with BT???????????
have a look at these (even though cant solve the prob on BA)
http://www.itechdynamic.com/html/border22.htm
and this
http://answers.google.com/answers/threadview?id=496339
you might wanna have a look here
http://forum.xda-developers.com/viewtopic.php?p=144425#144425
Registry
Hi again.
So, we didn't really find a solution yet?
I once read something about a little change to the registry, so that a second profile for the normal BT Headset appears.
I searched but I can't find it again.
does anyone know which post I mean?
If so, can you give me a link to that, because I believe that is the right way to solve the problem...
the key is if your source (pda or notebook) is running BT audio gateway. centrino notebooks supports audio gateway. I have a Jabra BT800 and listens to MP3s played from an HP DV1000 notebook but cannot have it working through my XDA II mini (the latter does not support BT audio gateway)
you might find this helpful => http://msdn.microsoft.com/library/d...html/wce50conaudiogatewayregistrysettings.asp
Hi folks!
A few weeks ago, we discussed the problem of diverting all audio signals from the BA to a normal BT headset. We more or less solved the problem by adding some fancy registry tweaks, that enabled the new BT profiles. The audiogw.dll didn't work correctly but then...
At this point, WM5 appeared and all efforts on the subject stopped.
So, has anyone an idea, if and how it would be possible to solve the problem on a BA running WM5?
What I am trying to do: I want to hear the instructions from TomTom or NAVIGON software on my BT Headset, which is still only useable for phonecalls.
A nice little program or registry patch to solve the problem would be highly apreciated...
I would love for this to work also. I would even switch back to wm2003se if it worked on it. Even tho my pda2k seems to run better on wm5; after all the patches and overclocking to 531.
Another problem with bluetooth
Hi again!
I just found out about a new bluetooth related problem:
The BA seems to use the internal MIC when in a phonecall, even though I am using a bluetooth headset. so I hear everthing loud and clear through the headset, but I need to talk to the internal MIC so that the other side can hear me, too.
Any idea why that is
i just noticed the BT and internal mic problem today i get the audio comming out of the phone and the BT headset at the same time also :shock:
BA first ppc phone with stereo sound
Since I upgraded my breeze to WM6 my handsfree bluetooth has not been working right. I have a JVC KD-BT1 bluetooth carradio/headset
I can pair with it and I see battery status, antenna signal and even the phonebook. When a call comes in, the radio sees it and then it mutes.
But there is no sound (microphone and speaker) on the radio. The microphone and speaker on phone keep working like there is no headset
I looked around and found out that microsoft uses a new bluetoothstack in WM6.
This is not compatible anymore with some headsets.
So there are sometimes these kinds of issues.
The best way to solve this is to get an firmware update of your BT headset.
I also found this alternative:
Change the registry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD
from:
5898764(Decimal) "Telephone (Smartphone)" (default)
to
5374476(Decimal) "Normal phone"
For me, this didn't work, because I couldn't get it to pair with the 5374476 value.
I changed it back and the I could pair fine, sadly with the same result.
Bluetooth problems
I also have some troubles concerning bluetooth and my handsfree kit. I also tried to change the HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD settings but it didn't help.
I cannot make a phonecall using my carkit (Parrot CK3100). It does mute the radio, but the phone conversation is still on the phone.
I have one workaround. .... When I use my GPS receiver and software actively, I CAN make a conversation by using the carkit....strangely.
But then the GPS stops during the conversation.
None of these problems are present when I use WM5, all WM6 and above ROMS have these problems..... Anyone?
Downgrading is not an option to me
Hi,
This is my first posting on this forum. I have a question about the Bluetooth of my Qtek 2020i. Is it supporting the A2DP Profile?
Roger Gustavsson, Sweden
I saw this writing:
Hi, I'm a newbie here. I would like to know if upgrading my radio rom to 1.04 (currently 1.03) on my Qtek 2020i will solve the bluetooth headset static problem. The static will be heard when I move away more than 2 feet (approximately) from the phone or if there is something between the phone and the bluetooth headset (touch BTS 900). But this only happen if I'm using the headset for calls (Headset Profile). Using it to listen to music (A2DP Profile) from the 2020i, I can move away up to around 5 metres without any skipping or static. I've tested the bluetooth headset with a Nokia 6600 phone and there is no problem during calls, so, it is not the headset. I'm hoping to solve the problem without having to buy another bluetooth headset as I like my BTS 900 very much.
Thanks.
Last edited by Md Farez; 08-03-2007 at 04:02 PM.
Click to expand...
Click to collapse
It does, after a patch, I think if you do a search for it, it should be there.
Hi, I have the ROM 2.03.408.3 ITA and RADIO 1.00.25.05, I starting to use the Bluetooth headset and speakerphone, I noticed some problems with connection loss.
I have a Motorola Bluetooth headset and after the first call immediately lose the connection and reconnecting it takes longer if you do not manually. But with the integrated handsfree in the car maybe do one or two calls, the next will not send hands-free speaker, but at the Diamond, the one after that maybe back in the handsfree because it finds the signal! The distance between the radio and the Diamond is less than 10 cm.
What can I do?
Thank you!