Related
Anybody else see this message? After upgrading to WM5 I get the message on the phone:
Unknown SIM status.
Only emergency calls.....
To test I put the SIM card in my MPx200 and it works fine so that card should be good.
Any ideas?
Got it figured out. I did the upgrade without the sim card in the device. So, extensive reading helped me come up with the idea of hard reset the device to get to the screen where it ask about kitl, etc. At this point I soft reset the device since I didn't want to loose the data I already had on the device.
Now the sim card is recognized.
This is a looong time after your post, but I wanted to thank you for posting the solution. You just saved me a lot of hair, thank you.
hello
two year ihave this problem (nogsm and error 114radio stackkk) and NO SOLUTION FOR ME
my two 9090 is good pda !!! finish gsm possibilities
My Orange SPV M2000 too ((((((
I just unpacked my vario a couple of hours ago and im already in deep ****
I played around with it a bit first, unlocked it so could get my old sim in it, en then i wanted to unlock it with lokiwiz to install a different rom so i could get rid of the t-mobile junk they put on there.
Lokiwiz loaded al the files correctly and performed a reset on my vario, when is rebooted it needed my pin code, but i thought my new sim was still in there instead of the old one. So i put in the wrong pincode, then it asked for my puk code.. I thought:wait a minute i need my other sim, so i changed the sim and rebooted. And now it just stopped working, its loading everything up to the today screen, when it pops up the window to enter the pincode, i do this and press enter, then i get the message:unknown sim status
When i try to enter the sim for the second time or wait for a minute i get the message: DATACRASH contact service center.
I tried a hard reset, and even got into the today screen without the pincode, where i went to the config screen en used the option to set averything back to factory settings. It rebooted and started the install all over again, and the t-mobile customization stuff.. so i thought nice! working again
But i was wrong, it still has the same problem..i tried the sim in another phone and it is working correctly, so it must be the vario itself that i destroyed..
I contacted the service center and someone from the repair department is contacting me monday, but im afraid they know what there talking about and he/she will find out i tried to unlock it..
So is there anyone that has any idea how im going to get out of this mess?? I dont want to start my new year like this..
I'm just guessing but you could try running lokiwiz again.
Use lokiwiz tool again pls and use both Unlock and CID Unlock tools (means to run it twice)...this mean should help I used lokiwiz02b version flawlessly
yeah i thought of that to but when there's no sim card in the device i cant connect it to my pc, activesync isnt showing any connection.
With a simcard in it i cant boot it up so then i cant get a connection either.
I dont know if a BT connaction would work but i dont have BT on my pc so..
It should connect regardless of the presence of the sim card.
bolasz said:
It should connect regardless of the presence of the sim card.
Click to expand...
Click to collapse
Agreed , without SIM it should start up in a mode similar to "flight Function"
omg im was about to cry yestersday.. i reinstalled activesync 38245 times and did 84567 hard resets on the vario, sometimes it would connect for 5 seconds but then loose it again..
At about 3AM i found out that the usb cable i was using was broken, i took the cable from my camera and it worked like a charm...
So i could run the unlock software again and did it the wright way now :wink:
Ive just been playiong around with tomtom and themes etc, so everything is back to a working order and the fun begins 8)
Tnx to everyone who helped me out!
Is that the cable you got with your Vario? Mine seems to be crap too, the one from my camera is working fine.
indeed, got one from my psp wich is working like a charm, the cable that came with it only works when i push it down..
hi, everybody
I have a Wizard. But yesterday, when I turn on it, i see :" Data Crashes. Plese contact your service Center" with this title: "SIM LOCK" in the screen.
I used awizard, Lokiwiz to unlock it. But nothing at all
please help me
No body help me???? or not have solution to fix this prolem?
try to start it over without a sim-card....what happens...!?
it's oke and I can use it same a pocket.
I am experiencing the same issue. Did anyone find a solution to this? No matter what I use Lockwiz etc... It still wont work. Pls Help
Thx
Beside you is possible violated area CID.In the field of CID is found SIM and CID lock.The Area CID -unique for each device .Lokiwiz -does not calculate new this area -he only modernizes given in this area.
This inscription appeared After what action?
p.s.
There is command In bootloader which destroys the area CID and others.
Check Your IMEI.If IMEI does not coincide -possible you have started this command.
how can solve it?
wlinsong said:
how can solve it?
Click to expand...
Click to collapse
I unsure that you this will help - but when I on C500 has deleted the area CID and got such message - I have restored only with the help of unlock http://www.imei-check.co.uk/ imei-check -anew calculates the area CID - unlock works through bootloader and so he does not modernize but anew calculates this area.
Try to talk with itsme in this forum -he has said that possible to calculate the new area CID -but has not described as.
p.s In Typhoon C500 and Wizard is used alike method SIM and CID blocking.
But aside from this unlock changes bootloader
For you http://www.imei-check.co.uk/m3000unlock.php
arc said:
wlinsong said:
how can solve it?
Click to expand...
Click to collapse
I unsure that you this will help - but when I on C500 has deleted the area CID and got such message - I have restored only with the help of unlock http://www.imei-check.co.uk/ imei-check -anew calculates the area CID - unlock works through bootloader and so he does not modernize but anew calculates this area.
Try to talk with itsme in this forum -he has said that possible to calculate the new area CID -but has not described as.
p.s In Typhoon C500 and Wizard is used alike method SIM and CID blocking.
But aside from this unlock changes bootloader
For you http://www.imei-check.co.uk/m3000unlock.php
Click to expand...
Click to collapse
WOW worked like a charm! Thanks I thought I had a brick!
I hope that this will help you.
I met several times like you situation on Wizard -but nobody did not describe after what action this has occurred.
It is Enough that 1 byte changed in the field of CID and she will be bad.
Possible during unlock or as a result other action (for instance action what other program ) has occurred the malfunction and something have changed this area.
Given area is not changed during flash ROM.
arc said:
I hope that this will help you.
I met several times like you situation on Wizard -but nobody did not describe after what action this has occurred.
It is Enough that 1 byte changed in the field of CID and she will be bad.
Possible during unlock or as a result other action (for instance action what other program ) has occurred the malfunction and something have changed this area.
Given area is not changed during flash ROM.
Click to expand...
Click to collapse
thanks very much
not solution to fix this problem!!!!!!!!!!!!!!!
Okay, I can report that paying for this software and running it on my MDA fixed the data crashes problem. I tried everything I could find on the web from using the lokiwiz02b and going back to the original rom... everything in every order I could think of. I flashed back to the original ROM which I downloaded from HTC America's site w/o the SIM in the phone, ran this software after shelling out 40 bucks, once it came back up I shut down, put my SIM in, booted and sure enough it worked.
Here is how I got in this position. I had a warranty replacement phone from a bad screen that kept getting out of calibration. I put my SIM and MINISD in and powered it on. I flashed to the 2.17 custom rom. It rebooted and I got the data crashes error.
Of course this is no guarantee. I see above where someone posted that it didnt fix their problem.
I just flashed up to the 2.21 custom rom and everything works fine.
I noticed after I started all this BS that there are two bad pixels on the replacement phone! SOB!
it worked for me too. but why does this happen in the first place? I only got this error from one of the two MDA's that I have flashed, the other one worked just fine.....
My screen died as well, got a replacement in. Blam drashed as well.
Ran all the loki stuff, and it IS the IMEI that causes it. Used this unlocker program, and it does work. I am on 2.17 now and about to load 2.21.
This is my last resort...
I tried every possible solution to solve this same issue and I am going to shell out the cash, but my problem is that I can't get my IMEI from my phone (#06#) like the imei-check website said to without my SIM in there. But with the SIM in there I can't type #06#. So how did everyone get their IMEI? Should I just use the number on the box, and just pray that it is the same as my phone?
Thanks
earljg said:
This is my last resort...
I tried every possible solution to solve this same issue and I am going to shell out the cash, but my problem is that I can't get my IMEI from my phone (#06#) like the imei-check website said to without my SIM in there. But with the SIM in there I can't type #06#. So how did everyone get their IMEI? Should I just use the number on the box, and just pray that it is the same as my phone?
Thanks
Click to expand...
Click to collapse
your imei is also in the back of the pda under the batery.
Cool, thanks!! Website didn't mention that
earljg said:
Cool, thanks!! Website didn't mention that
Click to expand...
Click to collapse
u can also get your imei by going to start/settings/system/device information and tap the indetity tab
Had a pain with this myself....had to cough up the money and unlock my phone that way but everything works fine now.
my phone seems locked, i tried to use vodafone SIM card, but my phone does not working.
anyone got idea?
did you http://forum.xda-developers.com/search.php ?
unlocking prog
here you go mate, worked on my xda11i, unzip, use sync to put it in your fne and run from there, orange and t mobile worked for me, the 3 network did not but i think they too expensive anyway for what you get
Thanks a lot!
hi, i just tried, buy it said an error occured while unlocking your phone. see xdadev-all-unlock.log file for details.
turned off the flight mode, it works, thanks.
I have to use xdadev_all_unlock-v1.6_138.exe but after having to place on my xdaì O2 it asks me a code , for my sim O2 help me
Sorry to regurgitate an old thread but I am having a problem unlocking my xda, I have to to turn off flight mode but my O2 sim has expired, so I cannot turn off flight mode, any ideas of how to get around this, or will I have to find an O2 sim to put in my phone?
I think you may well have to find any old O2 sim to just bung in. When I unlocked my XDA, I had my sim in the device (I did it literally a week after I got it), and it ran through its algorithms and cracked the software running on the unit to unlock it Never tried it without a SIM in, but I'd imagine it wouldn't work as the protection layer wouldn't be loaded...
Mark, if you havn't gotten around to fixing it yet, try buying an O2 PAYG sim for a tenner, any O2 shop in London should have one.
Hi, I
’ve had a Orange HTC Kaiser for ages (WM6), I got it unlocked by www.imei-check.co.uk and put my O2 sim in and everything worked fine until the phone crashed. Now if I put my O2 sim in the phone just says ‘The SIM card is missing’. I have tried everything I’ve put new rom’s on (I'm now on WM6.1), new radio, asked it nicely and I’ve run the unlocking software I found on this site and that told me the phone as unlocked??! Whatever I try the damn thing WON’T WORK!!!!! I’ve tried everything! Any help much appreciated! Oh and If I put an Orange sim card in the phone works.
Cheers
Crooky.
did you put your O2 sim into another phone to see if it works?
Yes, it's currently in a HTC M3100 working fine.
its probably just a contact problem, just try cleaning the sim, and the contact points on the kaiser or putting a piece of paper behind the sim and insert it
UNBELIVABLE! I can’t tell you how much work I’ve put into sorting this phone and when I read you’re reply I must admit I thought ‘Yeah Right!’ but I looked at the sim and it is slightly curved when it’s out of the phone, I put it in an held the sim on the contacts and it bloody worked!!!!!!! You’re a genius! Thanks for your help!