can not turn WIFI on after FLASHING rom 1.6.7.1 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

hi all,
i have a qtek 9100 flashed with the uk rom 1.6.7.1 from this website and since i did that... i can not turn my wifi on!
have readed almost all topics going about the wifi issues but nothing helps
please thanks to anyone how can help solving this problem
regards kimo

Having the same problem here with the dutch Qtek rom 1.3.7.10. Cant use WLAN after flashing from vario Rom to the Qtek.
Also have a problem when i try another Rom. It doesnt seems to work anymore when trying to flash. ActiveSync disconnects when trying to flash Rom. (is disconnects when the status bar is showing up)

did you fixed your wifi problem
did you fixed your wifi problem?
please let me know
thanks

Check your Router/wifi!!
I know this might seem really stupid, but I've had the exact same problem. Fortunately after hours of trying to solve it, I tried my wifes MDA Pro, which to my delight also couldn't connect via wifi. :lol:
My problem was exactly that. My wifi router needed to be soft-reset or switched off and rebooted!
It solved my problem. It might be the same for you. Incidentally, I am now running the same Qtek 1.6.7.1 ROM from T-mobile Vario ROM as you guys and I assure you it's not the ROM.
Give it a try if you haven't already. Additionally, I find after ROM updates, my wifi won't connect till I set the power slider (wifi settings to Best Performance).
Good luck.
mackaby007
Qtek ROM:
Rom Version: 1.6.7.1 WWE
Rom Date: 11/28/05
Radio version: 01.13.10
Protocol version: 4.0.13.24
ExtRom: 1.6.7.101

Related

Want to upgrade radio rom

Hi,
Is it possible to upgrade radio rom and leave other parts untouched?
I have trouble with 01.01.10 radio, GPRS gets stuck often. I want to flash 01.04.10.
I'm to, please
I've already tried 1.9.10 radio from norwegian ROM, - it was useless... I still can't start GPRS without SR .
What can we do with MTS... :?
With norwegian ROM? Soft reset? Fu... MTS! :evil:
I'm not sure it's MTS' fault. My previous Qtek 9090 with the newest radio rom worked fine.
I was told that 01.04.10 has no such problem so I want to try it but cannot find a way.
Vishni: Sure it's not MTS fault, but why I have no problem with other two: Beeline and Megafon :roll: ?
Russian ROM has 1.4.10 radio. If you want it I can upload ntrw dump, but it is 128 Mb...
Button said:
Vishni: Sure it's not MTS fault, but why I have no problem with other two: Beeline and Megafon :roll: ?
Russian ROM has 1.4.10 radio. If you want it I can upload ntrw dump, but it is 128 Mb...
Click to expand...
Click to collapse
Hm-m... I have Russian ROM too but radio is 01.01.10.
1. What is the OS rom version in your Russian ROM? 1.3.9.4 RUS?
2. 1.4.10 radio has GPRS trouble too using MTS, hasn't it?
I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.
Sorry - wrong forum
My Wizard has no problem at all.
With radio rom 01.12.10
garywizard said:
My Wizard has no problem at all.
With radio rom 01.12.10
Click to expand...
Click to collapse
Where did you got the updated ROM from ?
Arnon
i bought my wizard last week and the rom version is already the latest one.
i didnt update the rom.
ssn04 said:
I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.
Click to expand...
Click to collapse
Hi ssn04!
Can You post your radio-only upgrade, please.
Tnx.
I visited Russian qtek forum and I've found the problem is on Wizard+MTS network, radio version doesn't matter.
To repeat the problem just make a call, after that you cannot download any byte until SR.
I hope 01.12.10 would help...
vishny said:
I hope 01.12.10 would help...
Click to expand...
Click to collapse
Ïðîøèëñÿ. Íåò, ïîõîæå, ÷òî íå ïîìîãàåò
Òàê ÷òî æä¸ì äàëüøå, ïîêà ÌÒÑ íàñòðîèò-òàêè ñâî¸ æåëåçî...
I've tried. 01.12.10 didn't help
vishny said:
I've tried. 01.12.10 didn't help
Click to expand...
Click to collapse
I don't think your problem is the radio but the OS. I was having GPRS issues until I upgrade the OS to 1.6.7.1 Rom. Since then I have not had any issues.
rkorzuch said:
vishny said:
I've tried. 01.12.10 didn't help
Click to expand...
Click to collapse
I don't think your problem is the radio but the OS. I was having GPRS issues until I upgrade the OS to 1.6.7.1 Rom. Since then I have not had any issues.
Click to expand...
Click to collapse
What kind of issue you were having? I cannot download anything via GPRS connection after any voice call untill softreset.
vishny said:
What kind of issue you were having? I cannot download anything via GPRS connection after any voice call untill softreset.
Click to expand...
Click to collapse
The GPRS issue I was having was the GPRS Icon would show that it was connected but it wouldn't move any data. I had to shutdown the GPRS connection by holding the "End" button and restablish the connection. I haven't had that problem since I updated the OS Rom. However I have only had the new Rom installed for a day.
gprs issue
I am having the exact same issue with GPRS.
No data is transferred until you hold the red hangup button, then reconnect.
i-mate K-JAM
ROM 1.1.9.3
Radio 01.01.10
Network: Vodafone NZ
Seems to happen randomly and typically in Internet Explorer - just sits there saying "Locating..." but never goes to opening the page.

upgraded 8125, Wi-Fi does not work

I put the new FW or rom in my 8125 from Cingular, everything works.. got SMS working, got EDGE working, but Wi-fi does not
it sees the AP but will not connect. it says connecting then Unavailable
ideas.. i would like wifi.. really a conveance.
e.b.
what did you upgrade to? I upgraded to 2.16.9.101 and have had no problems connecting to my WPA protected wifi network.
mine says ROM 2.16.9.1 WWE
extended rom 2.16.9.101
radio 1.12.10
and you used the RUU file to upgrade the unit???? mine upgrade the radio to 2.07.10 as well.
IPL/SPL: 2.16
ROM Ver: 2.16.9.1 WWE
ROMdate: 2/6/6
Radio: 02.07.10
Protocol: 413.1.0.2
ExtRom: 2.16.9.101
ROM Ver: 2.16.9.1 WWE
ROMdate: 2/6/6
Radio: 02.07.10
Protocol: 413.1.0.2
i bypassed the extended rom.. so there is none
but.. still no working wifi
it see the AP but will not connect to it
same problem here, haven't found a fix yet. My router is only 802.11b capable and not 802.11g. I wonder if that has anything to do with it. Maybe this new ROM sets the device to G only. Although, using Nico's registry wizard, the G mode isn't selected.
Do you have any kind of encryption active on your wireless router? If so, turn it off and see if you can connect. If you can, I'd suspect a problem in the key.
If you still can't connect even when WEP or WPA is off, then the problem is elsewhere. What kind of router is it?
I was going mad with the same problem.
I'm not 100% sure it appears the issue was related to the MAC address of my unit - as well as WPA I do MAC filtering to weed out unwanted devices
I'm not sure if it was a base-station issue, or if the ROM upgrade changed the MAC address on my K-Jam
double-checked and added the IP from the device and now it's happy as Larry (as I say it may be a total red herring... I may have forgotten to save the router config to Flash and we had a powercut over the weekend...)
if you installed the cingular extended ROM do a hard reset immediately. that's what f's up wifi. i loaded the full extended rom and was NOT able to get wifi to even start. once i hard reset, everything was a-ok
darkjedi said:
if you installed the cingular extended ROM do a hard reset immediately. that's what f's up wifi. i loaded the full extended rom and was NOT able to get wifi to even start. once i hard reset, everything was a-ok
Click to expand...
Click to collapse
There is NO EXTEDNED rom installed at all.
I bypassed it compleatly.
when it asked me where I was (orange etc..) I did har soft reset and no rom was installed at all.
no cingular rom, no Imate rom, no extend rom other then the OS
e.b.
i wasn't meaning you in particular, i'm saying for the people who can't even get wifi started.
I did allow it to run the RUU's extended rom... I don't remember which carrier I chose on the carrier screen. My wifi does work fine on my WPA G network.
ok.. so i am an idiot.. i tried another AP and it worked fine.
so my question is.. (this worked before BTW, before I upgraded to the new ROM)
I have a linksys SRX400 router (WRT54GX4).
I just upped the FW to 1.00.10 from 1.00.09.
any ideas?
e.b.
I appear to have the same problem with my qtek 9100.
Used to connect to my pair of dlink dwl-900ap+ 's fine. Since the rom upgrade it will only connect if I turn off wep! No idea about wpa cause I've never managed to get it to work!
Naive queston
I just bought my Cingular 8125, and it's my first one of this kind.
Please, could some one tell me what advantage new ROM gives over standart package?
Thanks

HELP!!! why does my MDA VARIO keep flashing, twinkling

hi all, i am new here
i have a t-mobile MDA Vario
Rom Version: 2.17.7.2. wwe
Rom Date: 2/10/06
Radio version:02.07.10
Protocol version: 4.13.1.03
ExtROM version: 2.17.7.102
My machine now goes nuts by flashing, twinkling those items on the screen, when it does, i could not use anything any more.
I thought it was because of those chinese software, but it is not. I have un-installed them and re-installed a new rom. The situation is still the same.
And, normally when i dont use it for 2 mins, it will turn to power-save mode. But that doesnt happened anymore...
Can anyone help me with this? What is the problem?
Thank you in advance!

Can't make phone call or recive it after upgrade ROM

Hello to all,
I have big problem with my BA GSM... I have done a lot of research but I can't solve my problem...
I have upgraded my BA (SPV M2000 ORANGE UK) from win 2003 SE to Win 6.1, Win 6.5 Win 5... But in all ROM versions I don't have a possibility to make or receive call... Phone is on automatic search for network and always founds my home network, but when I'm supposed to receive a call, network is going down (just loose it). When I want to make call same thing happens. When I switch to manual searching for network I get this message: "Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again"
I have tried to change radio ROM to every version you have on forum (right now I am on last 1.15), but still same problem.
When I was on the win 2003 SE, I have to use unlocker to make GSM working and that is working just fine... But when I upgrade to any other version of ROM or radio ROM, GSM doesn't function like it should...
Device information for my BA:
Operatior Version: wm 6.1 ppc Pho...
ROM version: Black Skin HT4...
ROM date: 08/08/08
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1337.45
ExtROM version: Black Kernel
Model no: PH20B
Many thanks in front for any idea
Try going back to the original ROM or reflashing you current one. I had a similar problem where my sim was not inserted completly and would keep dropping in and out.
Thanks for respond I already tried to change sim card, but same thing happened... I don't know where I can found the original ROM for my SPV M2000 orange UK to try to fix my GSM... Does anybody now where I can found the original ROM for my baby ?
Here are 2 places for the original ROMs, also with original radio ROM.
http://firmware.atspace.com/Blueangel.html
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Thank you for help, I restored phone to shipped ROM RUU_v2.5_OrangeUK_v5.40.1.179.ship and everything works fine... I have don't have any problems..
Is that mean that now I can't upgrade my windows to any other windows for my phone, or I should try again with some differed ROM...do you have any idea what is best ROM for my BA ?
Working Device information:
Operator version: 5.40.1.179
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.06.02
Protocol version: 1337.38
ExtROM version: 1.40.179 WWE
You should be able to upgrade to other ROMs, I am not to sure why you had the problem with so many different ROMs. I use xplode's R7.1 WM6.5 ROM, but there are other to use. swampy395 also has a pretty good 6.5 ROM.
http://forum.xda-developers.com/showthread.php?t=482997
also make sure to remove the sd card AND the sim card from the device before upgrading and have the battery charged 100%, that should do the trick
please delete
Unfortunately its impossible to change ROM...I tried every Xplode ROM from ver 5 to 6.5, and also I tried swampy395 ROM... Always the same problem remains - GSM drop after I try to call or receive phone call, and after that, no SERVICE at all... I switched to every radio ROM from 1.00.00 - 1.15
I think I'm doing everything ok:
1) removed SIM card & memory card and confirmed that battery is 100% full
2) Entered bootloader and start MaUpgradeUt_noID
3) After upgrade is finished, I have done hard reset and entered in boot menu then do NO YES YES
4) After system is normally booted, I inserted SIM card, switched phone ON and reset it after that, because radio ROM need to boot also
And that's the way I have done upgrade
wow, that's a tough one.
question: i saw, the shipped rom you used, was orange uk, is your phone actually a british orange branded one, or was that just a test shipped rom?
have you ever, in wm2003 or wm6 tried running xda unlock? http://forum.xda-developers.com/showthread.php?t=240784 to get a sim unlock or just for fun?
and let me just throw one more thing in the discussion, the newer roms seem to support newer sim cards that wouldn't have worked with wm2003, maybe that is true the other way around as well, maybe your sim card is too old to work in "your new phone". happened to me once with another phone. contacted my operator and they sent me a new sim card, with the same number. a copy of my old card, just on the new ones.
have you ever tried it with another sim card?
wow, that was all i can come up with, your problem is really complicated and you already tried so much yourself, there is hardly anything to suggest anymore
Chef Tony my friend,
I have to unlock my phone when I receive it from UK (ORANGE UK is phone for sure) I do unlock with xdadev_all_unlock-v1.6_138.exe and its successful. I do unlock again for many times with new ROMs but nothing happened. I also try 4 different SIM card and there is no change... I will contact my network operator to see what they think...
Many thanks for helping me
Hi there. Have you solved this problem?
Best regards
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
And after i upgrade the rom my youtube player doenst work!
please make sure, you tested all the things suggested before. plus after posting three posts in a row, i would have expected a little more information, like rom version, country, carrier, radio version and so on. there is nothing new to say, if we have to guess everything.
about youtube, well, that depends on what rom you are using, you might even be able to just go on the site in your browser, of if you want a faster and more reliable solution, try -=this=-
Im still on wm2003... there is no solution for me

[Q] Help guys, Wifi not working at all, flashed everything

Hi all! I just got yesterday Mda Vario 3, aka kaiser, and the man who i bought it from told me that wifi need to be setup... Ok. I try wifi, it works, i connected to my router and it worked.
Read specs: radio 1.71.09.01
protocol 25.75.40.02
rom 3. abusalza and i think hard spl was 3.29
and, as far i know rom flashing, i thought get and flash new rom... i tried wm 6.1 wm 6.5... on some camera didnt work and i get a new radio and it works, BUT wifi doesnt work on any rom with any radio, i changed spl but does not work. i dont know what to do...
Any help would be gratefull

Categories

Resources