Registry values returns into initial settings - 8125, K-JAM, P4300, MDA Vario Software Upgrading

When I tune my registery, the values returns into the initial values after a soft reset. Is it normal ?
I use PHM registery editor.
An example is for this tweaks :
# HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\
# Assign a value of 4096 to CacheSize
# Assign a value of 1 to EnableCache
# Navigate to HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\
# Assign a value of 4096 to ReplStoreCacheSize

Wait a while (30 seconds or so) before you soft reset. WM5's persistant storage handling means that the registry is 'live' in RAM, and gets written out to the flash memory (persistant storage) periodically if there has been write access.
If the values still reset, make a bogus value (e.g. "Test = StillHere?"), wait again, reset. If your bogus value still exists, then the registry did get written away, but the other values don't 'stick' (may be overwritten by another application).

ZeBoxx said:
Wait a while (30 seconds or so) before you soft reset. WM5's persistant storage handling means that the registry is 'live' in RAM, and gets written out to the flash memory (persistant storage) periodically if there has been write access.
If the values still reset, make a bogus value (e.g. "Test = StillHere?"), wait again, reset. If your bogus value still exists, then the registry did get written away, but the other values don't 'stick' (may be overwritten by another application).
Click to expand...
Click to collapse
Turning the Wizard off (by holding the power key for 5 seconds) and back on instead of performing a soft reset works as well. This can be done instantly after editing one's registry.

[RESOLVED]
Ok, works fine now .... good tweaks !

And Thank's !

Related

Registry Tweaking Upgrading Backup ur MDA Vario Wizard 9100

Programs for MD Vario
ROM Update
Current Operating System: 1.6.2.4 (updated 9th March 2006)
Updates and instructions available at:
http://t-mobile.iris-global.com/download_manager_mda_vario.html
If the device appears locked at any stage, please check first the keypad lock isn’t “on”.
Hard Reset HARD RESET: start>settings>system tab> Clear Storage
 CONNECT DEVICE TO PC
 SYNCHRONISE – but uncheck all boxes first (makes installing everything else easier by avoiding lengthy synchs each time you install a new prog)
1. Essential Programs – all on www.handango.com
Program Location to Save to Notes
Pocket Informant DEFAULT DEVICE Great diary, contacts, tasks program; use international version
SPB Pocket Plus DEFAULT DEVICE for the X close button utility
Solvoed EngSpa Ultralingua SD CARD Spanish Advanced Dictionary
Paragon Spanish Sound Gold SD CARD Spanish Sound Module for the dictionary
SPB GPRS monitor DEFAULT DEVICE Monitor your data transfer when browsing the web to ensure you don’t exceed your monthly limit
SPB Backup ABSOLUTELY ESSENTIAL SD CARD Simply the best backup utility – backs up registry, PDA settings and programs all into one little executable program that you can save on your SD card and restore without even needing SBP backup loaded when your PDA goes funny
Vidya Pocket Registry Editor DEFAULT DEVICE Necessary for making the registry tweaks outlined below. Simplifies registry editing.
OMAP overclock ABSOLUTELY ESSENTIAL DEFAULT DEVICE The MDA Vario has a TI OMAP processor running at 180 MHz. With this utility, improve performance by increasing it to max 240 Hz (some say 264Hz is the upper limit). Read instructions below; need to add an instruction to the startup menu to ensure it always runs at the set rate on soft-resetting the MDA (rather than defaulting back to 180 MHz)
Memmaid Tweaking program DEFAULT DEVICE Again, needed for processor clocking, BUT has a great clean utility to clean out all the crap that cumulatively builds up with use.
Resco File Explorer SD CARD Super program for finding the files you want. Much better than the file explorer in WM5
SMARTSKEY ABSOLUTELY ESSENTIAL DEFAULT DEVICE A nifty little program that enables you to operate your MDA with one hand without the need for getting out the stylus. It does this by reconfiguring the buttons on your PDA so that a quick press of them does what they already do but a longer sustained press adds new functionality.
Read instructions below; the program already has an inbuilt startup instruction to set it to restart on reboot; smartskey will automatically set the OMAP clocking facility to 240; this means you can install OMAP and let smartskey do the tweaking.
NON ESSENTIAL PROGRAMS:
 Home pocket mobile inventory
 My Last Cigarette
 Speedreader (heavy and slow on CPU) vs fast reader
 Vito sketch artist
 Lexionary/English Pro Dictionary
 Bible
 Turboinvaders
 Microsoft Arcade Pack
 Palm games for pocket PC
Specific Program Installation and Configuration Instructions
Today screen = main screen you see
Pocket Informant
Start Pocket Informant (say yes to colour schemes)
Yes to customise it
Yes to make it the default
Add registration code
Start outlook messages on today screen
Menu>tools>options>storage
Click store attachments on storage card
Click  empty deleted items immediately
SPB Pocket Plus
After installing, remove the pink colour on the bar at the bottom: start>settings>personal>today>appearance; select windows default
On today screen tool bar click the system tab of SPB Pocket Plus
Click the house to get the screen display you want (takes time – I like the 5th one)
Then press right hand corner of screen (to the right of where the time is at the top)
Select options
Remove (uncheck the box):
 Safe mode
 Buttons
 File explorer and
 Today plug in
Click ok
OMAP Overclock
Instructions for overclocking Wizard (tested on Imate K-JAM). Use at your own risk!
1. Download the following file and unzip. Save the OmapClock.exe to your \Windows folder on your device: http://forum.xda-developers.com/download.php?id=9181
2. Open File Explorer on your device and open Omapclock.exe. Find the maximum speed that your device will handle without locking up. On each test, test all applications you use. This is important because once you place this in your startup, it will load up automatically and could cause your device to stop responding! 240Mhz works for me. Suspending the device at this point will cause the speed to be reset back to default. Execute Windows\OmapClock.exe again if this happens and you want to continue testing.
3. Download and install Resco File Explorer 2005: http://resco.net
4. Open Resco Explorer and go to the \Windows folder. Locate the OmapClock.exe file and hold the stylus on this file until menu pops. Choose “Copy”.
5. Now browse to \Windows\Startup then hold stylus in an empty area and when menu pops, choose paste shortcut.
6. Hold the stylus on the newly created OmapClock shortcut and choose Properties then click the Shortcut tab.
7. Target should be: “\Windows\OmapClock.exe” –clock 240
Change the 240 to the clock speed you tested in step 2 above.
8. Soft reset and test. Suspending the device will reset the device back to the default speed. This is a secondary test to make sure the device does not lock up!
9. Download and install DinarSoft MemMaid: http://www.handango.com/PlatformProd...23995&R=123995
10. Open MemMaid and choose the Notification queue button/tab on the bottom (second from left) then click the ADD button.
11. For Program, click the browse button and browse to the shortcut you created in steps 5-7. The location of the shortcut is \Windows\Startup.
12. From the event dropdown choose “The device woke up”.
13. Click Add.
14. Soft reset and you are done. The Clock speed will remain at the specified speed you specified in step 7 even when the device comes out of suspend.
Source: XDA-Developers
SmartsKeys
Enables mapping holding softkeys to close apps, open start menu, turn volume slider into scroll slider. Absolutely, the best software I've used on my device. Makes one handed use a breeze. Must register with XDA Developers to download.
The following functionality can be enabled by running the program:
• Tap soft key: orginal Soft Key functions
• Tap and hold left Soft Key: Start Menu
• Tap and hold right Soft Key: Close/OK button
• Volume Slider at the left = Page Up and Page Down
http://forum.xda-developers.com/viewtopic.php?t=41060&sid=fe9919e547cea5c146f1de0d7156a30a
To reset to default, soft reset the phone.
To make the program run after reset, put a shortcut at /windows/startup
Smartskey now includes a configuration file so you can make your own settings like which Soft Keys to alter, whether to use the Close/OK function to really close or only hide a program and an exception list for the Close/OK function.
That’s all great, but the best enhancement is the integration of the OMAP overclock program. From Smartskeys configuration you can overclock your processor to a configurable speed at start up, and even better, have that automatically activated after your devices comes back up from a soft-reset.
You can find Smartskey on
http://htcwizard.westlands.org/wp-content/uploads/2006/02/smartskey0.4.zip .
It includes the program itself, the configuration file and a readme.pdf . It does not include the OMAP overclok program, but I have it here for you:
http://htcwizard.westlands.org/wp-content/uploads/2006/02/OmapClock.exe
2. More MDA Vario Settings to Alter:
Word
Open Word
Menu>Options
Check the box “Save to storage card”
Other Settings
Check the box “Remove from display” (start>settings>today)
Check box “Cleartype”
Start>Settings>Personal>Input>Word Completion>Uncheck “Suggest words when entering text”
Start>settings>Personal>Menus: select which 7 programs you want listing in the start menu
Start>settings>Personal>Owner Information>Set Stuff in Identification; also look at “Notes” and “Options” tabs
Start>Settings>Personal>Today>Items tab: Decide which programs you want in “Today” screen
start>settings>system tab>Regional Settings>Choose your location
Start>Settings>Systems Tab>Screen>Cleartype tab>Enable ClearType
3. Make a Registry Backup – “originalregistry”You need to make a registry backup at this stage so that you have a safe copy of the original registry that came with the device so that you can restore back to it should you make a mess of things when tweaking as instructed below. I strongly recommend Vidya Pocket Registry Editor.
Don’t ever delete this file.
Make sure the selection cursor is on “Pocket PC” and NOT on any of the other subfolders otherwise it will only backup those subfolder registry entries.
Click File>Export Registry
Type in a name – I suggest “originalregistry”
Don’t forget to select “Storage Card” for Location
Click Save
4. Registry Tweaks
These are all quotes I've compiles from other forums. I think I've done most of these and they work. Select whichever you would like to apply to your MDA device. You're going to need a registry editor. I strongly recommend Vidya Pocket Registry Editor. After you have made all the changes you want, soft reset the device to get them to “kick in”.
Improve Performance Generally
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=8192
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\EnableCache=1
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize=8192
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\
MSFlash\FATFS\Filters\DataCacheSize=8192 [this needs adding]
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ MSFlash\FATFS\Flags=40 [this needs adding]
All values are D-values
Caps/Shift Keyboard Notifier on Screen
Go to:
\HKCU\ControlPanel\Keybd
Create the registry entry called EnableIndicator and assign the DWORD value of 1
After soft-resetting the device, an indicator will appear next to the keyboard icon on the bottom of the screen! Tapping the Shift key shows a "C" while tapping the Dot key shows a dot! Very cool!
Keep the GPRS Connection Active At All Times
Remember, you’re only paying for the amount of data that is transferred; so why not keep the GPRS connection active all the time rather than waiting 1-2 mins for the device to connect every time you want to browse the net? You don’t pay anything for an active GPRS connection when you are not in internet explorer.
HKLM\Comm\ConnMgr\Providers\{7C4B7A3...}\Connections\GPRS...\
change value "AlwaysOn" from 0 to 1
Store Internet Clutter on Your SD Card to Save Device Memory
Put IE cache on storage card instead of memory; this increases the performance of your device. This hack will increase your available ROM memory and people have reported storage gains of over 9 mb. You will need to have a storage card with some free memory installed to utilize this hack.
First open up internet explorer and navigate Menu>Tools>Options>Memory
Press the delete files button to clear the cache
Press delete the cache
Press delete the history
Then open up file explorer from the programs folder in the start menu.
Navigate to the Storage Card and make sure that you are in the base directory of the card.
Then create an I.E. folder and within that folder create a folder called “cache” and “history”
Open up a registry edit program
Navigate to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache"
Change the default value "\Windows\Profiles\Guest\Temporary Internet Files" to "\Storage_Card\ie\cache"
Change the other values in the Shell Folders section of the registry to the folders you created and then soft reset.
Be warned that you will create errors in I.E. if you do not have a storage card inserted with those directories on it while you are surfing from now on.
Get a Different GPRS/EDGE Icon
Registry: HKLM\Drivers\BuiltIn\RIL
Key: EnableDifferGprsEdgeIcon (dWord)
Value: 0 = disabled
1 = enabled
Disable SMS Received Notification – switch it off if it annoys you
Hkey_current_user\software\microsoft\inbox\settings\SMSDeliveryNotify
Change Dword: 1  0=off
Disable Message Sent Notification
Registry: HKLM\Software\Microsoft\Inbox\Settings
Key: SMSNoSentMsg (dWord)
Value: 0 = disabled
1 = enabled
Turn On GPS Application (GPS not GPRS ie Navigation Stuff)
First of all, your MDA does NOT have GPS built-in; let's make that clear from the start.
However, Windows Mobile 5.0 includes a GPS Control Panel for ease of configuring Bluetooth GPS devices. This includes creating 'virtual ports' so that multiple programs can access the same NEMA GPS stream from said BT/GPS device. This is helpful for anyone who uses GPS for Navigation, War-Driving and lots of new emerging location-based programs which use GPS information available to your MDA.
Unfortunately, the Registry Wizard for tweaking the MDA available in this FAQ and over at xda-developers does not work with the T-Mobile ROMs. You have to manually edit the registry by following these instructions:
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2"
The GPS panel will now show up in your connection settings
***Note: You must delete 'Redirect' and 'Hide' keys completely***
Soft restart, wait 30 seconds, restart and viola, GPS Control Panel is now enabled.
NB 2=show; 1=hide GPS icon
How I set-up (after BT pairing with the GPS)
Open the new GPS Icon, I then set my GPS Settings on the MDA for 'GPS Program port:' to COM8 (the 'virtual port' for your programs to access the same GPS data) .
Then set the 'GPS hardware port:' to COM6.
Also set the Baud Rate to 9600 (default for my BT/GPS unit)
Check the box 'Manage GPS automatically'.
I'm using WiFiFoFum2, Socket MyNavigator and VisualGPSce to simultaneously run utilizing my BT GPS device. It works flawlessly.
Enable 802.11g WIFI Speed (rather than the default 801.11b)
For more info:
http://forum.xda-developers.com/viewtopic.php?t=38898
1) Locate the following key: HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
2) Add the following key:
name: dot11SupportedRateMaskG
D value: 8
Glyph Cache
Your MDA uses a section of the memory called glyph cache to store your fonts' glyphs and other graphical outputs for things like gaming. You can modify standard graphic rendering so that games run more smoothly with faster graphics. Noted improvement especially for racing, action and arcade games.
Enable Cleartype in Landscape mode
Clear type smoothes the edges of screen fonts for many programs to make reading easier and make your device appear more slick. You can turn this on by going to Start>Settings>Systems Tab>Screen>Cleartype tab>Enable ClearType
However, if you view anything in Landscape mode (by opening the keyboard for instance); for some reason, landscape doesn’t work in this mode. To enable it in landscape mode too, do this to the registry
HKLM\System\GDI\ClearTypeSettings
Key: OffOnRotation (string)
Value: 0
(NB 0 = on; 1 = off)
Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show
Alter Horizontal Scrollbar Width
Registry: HKLM\System\GWE
Key: cyHScr (dWord)
Value: 13 = default
Alter Vertical Scrollbar Width
Registry: HKLM\System\GWE
Key: cxVScr (dWord)
Value: 13 = default
Alter Taskbar Date/Time
Registry: HKLM\Software\Microsoft\Shell
Key: TBOpt (dWord)
Value: 0 = Nothing
1 = Time
2 = Date
3 = Time and date
Enable Bluetooth Receive
Registry: HKLM\Software\Microsoft\Obex
Key: IsEnabled (dWord)
Value: 1 = enabled
2 = disabled
Increase Font Cache
Registry: HKLM\System\GDI\SYSFNT
Key: CS (dWord)
Value: 0 (Default)
4096
8192 (preferred)
16384
Store Internet Clutter on Storage Card
Registry: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\shell Folders
Key: Cache (string)
Value: \Storage Card\Temporary Internet Files
\Windows\Profiles\guest\Temporary Internet Files
Disable IE background sounds
Registry: HKCU\Software\Microsoft\Internet Explorer\Main
Key: Play_Background_Sounds (dWord)
Value: 1 (Default)
0 Disabled
Alter the Default Input Method
Registry: HKCU\ ControlPanel\SIP
Key: DefaultIM (string)
Value:
Keyboard {42429667-ae04-11d0-a4f8-00aa00a749b9}
Letter recogniser {42429690-ae04-11d0-a4f8-00aa00a749b9}
Block recogniser {42429691-ae04-11d0-a4f8-00aa00a749b9}
Transcriber ***0034DD0-2AD4-11d1-9CB0-E84BE8000000}
Phone pad {51A2CB38-154E-4C92-A625-A83871C99EC2}
5. Do an Complete Device Backup(1) – “backupprogstweaks”You need to make a complete device backup at this stage because your device at this stage has been fine tuned to your perfection. If anything happens in the future, you can now restore to exactly this point without having to reinstall programs and alter registry settings again. I strongly suggest use SPB Backup and make sure you save the “Full” backup to your SD card; suggest calling it something like “progsntweaksbackup”.
Click “Last Backup” segment of your today screen or select Start>Progs>SPB Backup
Select Full Backup
Click Next; choose file name; set location to Storage Card
Click Next
Now let it do its job
6. Install Non-Essential Software
By non-essential I mean software that you’d like on now, but you don’t know whether you might remove in the future if the push came to shove.
Try and save all of these to the storage card to make sure you don’t eat all the memory on your device. Remember, you want to keep the main memory of the device as free as possible.
7. Do Another Complete Device Backup (2) – “backupallprogstweaks”
This backup is of all the programs (essential + non-essential) and tweaks in case you ever want to restore it to this point.
Click “Last Backup” segment of your today screen or select Start>Progs>SPB Backup
Select Full Backup
Click Next; choose file name; set location to Storage Card
Click Next
Now let it do its job
8. Synchronise – first proper synchronisation
• SYNCHRONISE – but now check those boxes you want on
 Alter active sync settings:
 Tools>options>email
 2 weeks
 5Kb
 max 50Kb attachments
 Click OK
 PDA will synchronise
9. Do Another Complete Device Backup (3) – use the name suggested by the program
This backup is of the first synchronisation in case you ever want to restore it to this point.
Click “Last Backup” segment of your today screen or select Start>Progs>SPB Backup
Select Full Backup
Click Next; choose file name; set location to Storage Card
Click Next
Now let it do its job
A Note on the Three Backups
You might be wondering why the need for the three types of back up. Let me make this clear: you only need to do these backups ONCE. The three back ups then give you the flexibility of restoring to whichever point you want to when the need arises. Don’t ever delete these three backups.
Having said this though, don’t forget to regularly back up your device just to keep the most up to date back up at hand in case your battery goes dead and you simply want to restore it back to the last configuration (with email, calendar and contacts data).
OTHER USEFUL THINGS YOU SHOULD KNOW
Changing the Clock
You can change out of 24 hour clock mode by going to regional settings and choosing a non-capitalized option like hh:mm:ss
Switching between vibrate and ring mode
Hold down the Comm Manager button for a second or two on the side of the device above the volume slider. This will toggle the unit between silent (with vibrate) and your regular ringer on settings.
What do the LED lights on the front indicate?
Left LED:
Blinking blue - bluetooth enabled
Blinking green - Wifi enabled
Right LED:
Blinking green - Phone enabled
Blinking orange - Battery Low
Solid orange - Charging Quote:
Note: the right led blinking orange could also mean that you have an alert in addition to the low battery. It is dependant on how you set up your notifications.
Installing Your Own Sounds for Ring Tones, Alarms and Notifications
You need to have a set of “ring tones” and “alarms and notification sounds” in two separate folders to begin with on your PC.
Make sure those in” ring tones” are in mp3 format
Make sure those in “alarms and notifications” are in wav format
Connect and synchronise your device with the computer
On your PC:
Open the ring tones folder
Copy the mp3 files you want
On ActiveSyn, Click on Explore>My Device>Windows>Rings Folder
Paste them there
On your PC:
Open the “sounds and notifications” folder
Copy the wav files you want
On ActiveSyn, Click on Explore>My Device>Windows
Paste them there
That’s it. Now you should see them all. If you can’t see one or two, it is probably because they are too big in size.
Also I neglected to mention that you can load them on the minisd card (obviously if you have one) to the root folder and they will work. To change it to your new ringone, go to settings > sounds and notifications > notifications tab > change the event to incoming call check play sound and select the sound
Bluetooth Messaging
I've seen people send and receive messages via bluetooth with regular phones like Nokia, and I was wondering whether this is possible with a T-Mobile Vario (Windows Mobile 5). Would I need to install any application for this? Thanks.
Well i think theyre not really sending SMS Messages.. these are actually Notes. You don´t need a program for it. Just create a new Note/Text-File and send it via Bluetooth!
I hope this document has proved useful.
Very useful indeed, thank you.
Very nice
Holy crap! You just answered nearly every question I had about: the cryptically-described options in Registry Wizard, various shortcuts (vibrate/sound mode for example), and the most useful programs to install.
Thanks a bunch.
BACKLIGHT SETTINGS
Since I upgrade to IMATE'S LATEST ROM, when I do soft reset the backlight off setting on battery reverts to 10 seconds instead of the 3 minutes I set it at.
Any suggestions or tweaks for this??
Thanks
nice piece of work m8
Brilliant. Excellent piece of work bringing all of this information together.
db
ring tone can be WMA. you can use movie maker (MM) (on your XP box) to edit/cut them to make it smaller (shorter) and save it as WMA. Now, MM does not have save as WMA option but if you only have audio source, save movie option will actually do save WMA.
One more thing... you can copy your ring tones on \storage card\my documents
If I use TotalCommander to add Caps/Shift Keyboard Notifier on Screen
Create the registry entry called EnableIndicator and assign the DWORD value of 1
once I did this and klick ''ok'' and soft-reset the phone, it is gone: no EnbleIndicator in the registry......what am I doing wrong??
zago187 said:
If I use TotalCommander to add Caps/Shift Keyboard Notifier on Screen
Create the registry entry called EnableIndicator and assign the DWORD value of 1
once I did this and klick ''ok'' and soft-reset the phone, it is gone: no EnbleIndicator in the registry......what am I doing wrong??
Click to expand...
Click to collapse
Switch off first (suspend) to make the device write the reg.
Sweet!
Thanks man!!
ENABLE INDICATOR
I had done this originally on CINGULAR 8125 original ROM. Since I did upgrade to IMATE LATEST ROM--the DWORD is there, but the CAPS LOCK indicator doesn't show up??
Any ideas?
Thanks
Hi Dudes,
I have a problem, when I've installed the software, (the Resco File Explorer) I get some VERY annoying light blue little bar in the top of my screen... Plz help!!
Thanks in advance,
Rik
[email protected] said:
zago187 said:
If I use TotalCommander to add Caps/Shift Keyboard Notifier on Screen
Create the registry entry called EnableIndicator and assign the DWORD value of 1
once I did this and klick ''ok'' and soft-reset the phone, it is gone: no EnbleIndicator in the registry......what am I doing wrong??
Click to expand...
Click to collapse
Switch off first (suspend) to make the device write the reg.
Click to expand...
Click to collapse
that is what I am doing after I add the reg (soft reset), but still no change saved.
Is this what you meant?
zago187 said:
[email protected] said:
zago187 said:
If I use TotalCommander to add Caps/Shift Keyboard Notifier on Screen
Create the registry entry called EnableIndicator and assign the DWORD value of 1
once I did this and klick ''ok'' and soft-reset the phone, it is gone: no EnbleIndicator in the registry......what am I doing wrong??
Click to expand...
Click to collapse
Switch off first (suspend) to make the device write the reg.
Click to expand...
Click to collapse
that is what I am doing after I add the reg (soft reset), but still no change saved.
Is this what you meant?
Click to expand...
Click to collapse
Do your REG things, Close TotalCommander, Turn device off (Power), wait a few sec, only then - Restart device.
rreinink said:
Hi Dudes,
I have a problem, when I've installed the software, (the Resco File Explorer) I get some VERY annoying light blue little bar in the top of my screen... Plz help!!
Thanks in advance,
Rik
Click to expand...
Click to collapse
I still have this problem
Omap
Installing smartkey makes the whole explanation how to start up Omapoverclock not needed.
Hi I'm confused
I'm trying to change the temporary internet folder to starage card, and I found some reg hacks to do it but which is the correct one? pls help
RELOCATE PIE DATA STORAGE
This hack will increase your available ROM memory and people have reported storage gains of over 9 mb. You will need to have a storage card with some free memory installed to utilize this hack. First open up internet explorer and navigate Menu>Tools>Options>Memory and press the delete files button to clear the cache then delete the cache and the history. Then open up file explorer from the programs folder in the start menu. Navigate to the Storage Card and make sure that you are in the base directory of the card. Then create an ie folder and within that folder create a cache folder, history, and Open up a registry entry program such as Resco Registry that comes with Resco Explorer 2005. Navigate to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache". You can change the default value "\Windows\Profiles\Guest\Temporary Internet Files" to "\Storage_Card\ie\cache". Change the other values in the Shell Folders section of the registry to the folders you created and then soft reset. Be warned that you will create errors in ie if you do not have a storage card inserted with those directories on it while you are surfing from now on.
Change the location of 'Temporary Internet Files'
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache = "\Storage Card\cacheie" (REG_SZ string, no quotes)
To return to the original location:
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache = "\Windows\Profiles\guest\Temporary Internet Files" (REG_SZ string, no quotes)
FRENCH ?
there is a langurer french for the vario
about the light blue bar
that light blue bar is what we call an improved battery meter/bar. I know how turn it of with spb pocket plus. but not with this program. I am typing this on my vario right now and I noticed that the keyboard times out much to fast in the ark. and I found no setting or tweak for this obvious forgotten important setting.
This thread seems to be very useful, but it does make me think have I done the right thing?
That is, I'm a long time palm/treo 650 user and the treo seems much easier to play around with. I've just ordered an MDA vario from T-mobile & waiting for it to arrive(come into stock first) and I've been researching it & wondering if I can get rid of all the T-mobile stuff & just have the standard stuff as supplied by HTC/microsoft.
I'm not keen on all this registry hacking as I've never done it before & I've just moved over to an apple iMac as well. At least the iMac can run windows now.

Make Your MDA Vario Wizard Work Better - tips and tweaks

Make Your MD Vario Work Better
This document is to save you time and make life easier. Updated from my earlier version.
ROM Update
Current Operating System: 1.6.2.4 (updated 9th March 2006)
Updates and instructions available at:
http://t-mobile.iris-global.com/download_manager_mda_vario.html
If the device appears locked at any stage, please check first the keypad lock isn’t “on”.
UNLOCKING THE SIM
So you can use it with any SIM card eg abroad on holidays with local SIM cards to reduce cost
Go to http://forum.xda-developers.com/
Do a search for the program lokiwiz (current version at this time is 0.3a)
Follow the instructions.
To download it, you must log into the site first. Then the link to the download is displayed. Download it to somewhere on your PC.
 Take out the SIM of your Vario
 Synchronise with PC via activesync
Copy enablerapi.cab to your PDA device (file from lokiwiz zip folder, in utilities folder. It is a zip file and not to be confused with enablerapi.bat)
 Run enablerapi.cab from your device
 Then run lokiwizmsl.bat from your PC, let it run in the DOS window
 DON’T CLOSE THE DOS WINDOW
 If successful, you’ll see your SIM unlock code – write it down
 Now insert a new SIM card and enter that number to unlock your phone
 Once complete, remove SIM card and re-insert your original SIM
 You’re done
Hard Resetting MDA Vario
There are different severities of hard resetting your MDA vario. Which one you use depends on what you are trying to achieve. If your phone is stuck and wont let you play, try the hard core resets (progress from method 1 (less sever) to method 3 (most severe). If it’s just a bit slow, try the soft reset.
HARDCORE RESET 1
start>settings>system tab> Clear Storage
This will still clear all your data and all the programs you have loaded onto your device. You’ll need to start all over again.
HARDCORE RESET 2
I hold the Comm and Voice Button (top two buttons on the side) AND the camera button (bottom right). Keep them pressed in and hit the reset with your stylus. Keep pressed in and let go of the stylus. Release when you see the following message:
PRESS Send to restore factory default,
SEND is the green lift up phone button on the left
It will do a brief format and restore to factory settings.
HARDCORE RESET 3
If your MDA wont budge with HARDCORE RESET 1 or 2, try this:
Enter Bootloader, - hold the "camera" (bottom right) and briefly press the reset button, don't release "camera" until you can see colour screen, connect USB cable, and start to re-flash the ROM (download the latest flash rom update from http://t-mobile.iris-global.com/download_manager_mda_vario.html
SOFT RESET METHOD 1
This is the lightest of the reset methods. This is the one to use if you want to reset your device without having to re-install all your personal programs and data
 Simply press the reset hole with your stylus on the right hand side of the MDA device.
Essential and Non-Essential Programs
See at the end of this document for a guide to some good programs “out there”. Try and decide which you feel are essential must haves and which are not necessary but useful (non-essential). Make two columns on an A4 sheet because this will come useful when setting up you Vario as detailed below.
Setting Up Your Vario for the First Time
1. Unlock your SIM card as above if you ever plan on using it on another network – If you got your phone from T-mobile, it’s likely that they’ve locked it so that you stay with them. However, it is your phone and it’s not illegal to unlock it: so unlock it in case you want to use it with another mobile network provider or even use a different local SIM card for instance when you are on holiday in Spain or somewhere (much cheaper way of making calls whilst abroad)
2. Install all the ESSENTIAL programs you will always want
3. Tweak the settings of all the programs you use eg setting Mobile Word to store documents on the storage card rather than eat away at your valuable device storage space. A full list of tweaks for programs I use can be found in the “Program Configuration” section at the end of this document.
4. Now BACKUP that device using software like SPB Backup so that you can always reset your device to this point if you ever get “stuck”. Call it something like “BACKUPESSENTIALPROGSANDTWEAKS”. ENSURE ALL BACKUPS ARE STORED ON THE SD CARD. With a program like SPB Backup, the backups are stored as self executable files on the storage card so that when your MDA goes pear shaped, you can simply reset it, insert your SD card and click on the back up file to restore your device without having to even load SPB backup again! How cool is that? Especially when you are on the move.
5. Then install the Registry Wizard program to help you tweak your PDA phone. You can download it here
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
but you have to have logged into the site to see the downloadable files.
This really is a super program that you’ll be glad to have installed. However, I found that if you change the default input from keyboard to something else, your device may lock itself; leave it at keyboard and everything should be Ok.
To install, download the latest version or RegistryWizard AND the OpennetCF programme to your storage card. These are cab files and they might appear like zip files. Insert the SD card back into the device and navigate to where you stored them using your device’s file explorer (or something similar). First install the OpennetCF program (bottom of the list of the downloadable files in the link above) into the device memory. Second install the latest version (1.0T) of the RegistryWizard to the device memory. You install them simply by clicking on them. Once installed, soft reset the device (
Now tweak it as required
6. Install the camera patches – to make your camera work better
You can find the files on these links: (again, you need to be logged in to see the downloadable files)
http://forum.xda-developers.com/download.php?id=10524 : for the camera fix which gets rid of any speckling (a permanent fix that remains on hard resetting)
http://forum.xda-developers.com/download.php?id=10396 : a fix to make the camera image more sharper (needs re-installing after any hard reset)
http://forum.xda-developers.com/viewtopic.php?t=45123 : a list of discussions about these two fixes
The camera will work best on the auto setting and much better than before.
If you know how to registry tweak, consider this:
Increase camera frames per second: this tweak will let you increase the frames per second of the video camera to make more fluent movies:
HKey Local Machine\Software\HTC\Camera\ReParam\MP4Large (or Medium or Small).
Change the FrameRate value from 10 (default) to 19. Above 19 it is laggy .. so don’t go above it.
7. Synchronise your device with your PC to load calendar, diary and contacts.
8. Alter active sync settings to how you want them eg Tools>options>email; set to 2 weeks, 5Kb, max 50Kb attachments, Click OK. PDA will re-synchronise
9. Consider backing up again after this point. Call it something like Backupstage2. If your device causes problems for what ever reason, you now have two options where you can reset your device to.
10. After that, you can start installing programs that you’d like to “play” with. If things go wrong or the system slows down, no worries  you have a backup of the essential ones anyway.
A Note on the Two Backups
You might be wondering why the need for the two types of back up. Let me make this clear: you only need to do these backups ONCE. The two back ups then give you the flexibility of restoring to whichever point you want to when the need arises. Don’t ever delete these three backups.
Having said this though, don’t forget to regularly back up your device just to keep the most up to date back up at hand in case your battery goes dead and you simply want to restore it back to the last configuration (with email, calendar and contacts data). SPB Backup utility is ideally placed for this.
Resetting Your Device – if it starts to play up
1. Consider a soft reset, if this fails then do a hard reset (details above)
After the hard reset:
2. Run your back up program eg “BACKUPESSENTIALPROGSANDTWEAKS” ( to re-install all your ESSENTIAL programs
3. Then install the registry wizard program to help you tweak your PDA phone
4. Install camera patches (if you’ve installed the de-speckler before, u don’t need to do this particular one again)
Remember, install OpennetCF cab file first into the device memory; second install the latest version (1.0R) of the RegistryWizard.
Now tweak it as required
5. Synchronise your device with your PC
6. Voila! Your ready to go.
1. Essential Programs – all on www.handango.com
Program Location to Save to Notes
Pocket Informant DEFAULT DEVICE Great diary, contacts, tasks program; use international version
SPB Pocket Plus DEFAULT DEVICE for the X close button utility
Solvoed EngSpa Ultralingua SD CARD Spanish Advanced Dictionary
Paragon Spanish Sound Gold SD CARD Spanish Sound Module for the dictionary
SPB GPRS monitor DEFAULT DEVICE Monitor your data transfer when browsing the web to ensure you don’t exceed your monthly limit
SPB Backup ABSOLUTELY ESSENTIAL SD CARDSimply the best backup utility – backs up registry, PDA settings and programs all into one little executable program that you can save on your SD card and restore without even needing SBP backup loaded when your PDA goes funny
Vidya Pocket Registry Editor DEFAULT DEVICE Necessary for making the registry tweaks outlined below. Simplifies registry editing.
OMAP overclock ABSOLUTELY ESSENTIALDEFAULT DEVICE The MDA Vario has a TI OMAP processor running at 180 MHz. With this utility, improve performance by increasing it to max 240 Hz (some say 264Hz is the upper limit). Read instructions below; need to add an instruction to the startup menu to ensure it always runs at the set rate on soft-resetting the MDA (rather than defaulting back to 180 MHz)
Memmaid Tweaking program DEFAULT DEVICE Again, needed for processor clocking, BUT has a great clean utility to clean out all the crap that cumulatively builds up with use.
Resco File Explorer SD CARD Super program for finding the files you want. Much better than the file explorer in WM5
SMARTSKEY ABSOLUTELY ESSENTIAL DEFAULT DEVICE A nifty little program that enables you to operate your MDA with one hand without the need for getting out the stylus. It does this by reconfiguring the buttons on your PDA so that a quick press of them does what they already do but a longer sustained press adds new functionality.
Read instructions below; the program already has an inbuilt startup instruction to set it to restart on reboot; smartskey will automatically set the OMAP clocking facility to 240; this means you can install OMAP and let smartskey do the tweaking.
NON ESSENTIAL PROGRAMS:
 Home pocket mobile inventory
 My Last Cigarette
 Speedreader (heavy and slow on CPU) vs fast reader
 Vito sketch artist
 Lexionary/English Pro Dictionary
 Bible
 Turboinvaders
 Microsoft Arcade Pack
 Palm games for pocket PC
Specific Program Installation and Configuration Instructions
Today screen = main screen you see
Pocket Informant
Start Pocket Informant (say yes to colour schemes)
Yes to customise it
Yes to make it the default
Add registration code
Start outlook messages on today screen
Menu>tools>options>storage
Click store attachments on storage card
Click  empty deleted items immediately
SPB Pocket Plus
After installing, remove the pink colour on the bar at the bottom: start>settings>personal>today>appearance; select windows default
On today screen tool bar click the system tab of SPB Pocket Plus
Click the house to get the screen display you want (takes time – I like the 5th one)
Then press right hand corner of screen (to the right of where the time is at the top)
Select options
Remove (uncheck the box):
 Safe mode
 Buttons
 File explorer and
 Today plug in
Click ok
OMAP Overclock
Instructions for overclocking Wizard (tested on Imate K-JAM). Use at your own risk!
1. Download the following file and unzip. Save the OmapClock.exe to your \Windows folder on your device: http://forum.xda-developers.com/download.php?id=9181
2. Open File Explorer on your device and open Omapclock.exe. Find the maximum speed that your device will handle without locking up. On each test, test all applications you use. This is important because once you place this in your startup, it will load up automatically and could cause your device to stop responding! 240Mhz works for me. Suspending the device at this point will cause the speed to be reset back to default. Execute Windows\OmapClock.exe again if this happens and you want to continue testing.
3. Download and install Resco File Explorer 2005: http://resco.net
4. Open Resco Explorer and go to the \Windows folder. Locate the OmapClock.exe file and hold the stylus on this file until menu pops. Choose “Copy”.
5. Now browse to \Windows\Startup then hold stylus in an empty area and when menu pops, choose paste shortcut.
6. Hold the stylus on the newly created OmapClock shortcut and choose Properties then click the Shortcut tab.
7. Target should be: “\Windows\OmapClock.exe” –clock 240
Change the 240 to the clock speed you tested in step 2 above.
8. Soft reset and test. Suspending the device will reset the device back to the default speed. This is a secondary test to make sure the device does not lock up!
9. Download and install DinarSoft MemMaid: http://www.handango.com/PlatformProd...23995&R=123995
10. Open MemMaid and choose the Notification queue button/tab on the bottom (second from left) then click the ADD button.
11. For Program, click the browse button and browse to the shortcut you created in steps 5-7. The location of the shortcut is \Windows\Startup.
12. From the event dropdown choose “The device woke up”.
13. Click Add.
14. Soft reset and you are done. The Clock speed will remain at the specified speed you specified in step 7 even when the device comes out of suspend.
Source: XDA-Developers
SmartsKeys
Enables mapping holding softkeys to close apps, open start menu, turn volume slider into scroll slider. Absolutely, the best software I've used on my device. Makes one handed use a breeze. Must register with XDA Developers to download.
The following functionality can be enabled by running the program:
• Tap soft key: orginal Soft Key functions
• Tap and hold left Soft Key: Start Menu
• Tap and hold right Soft Key: Close/OK button
• Volume Slider at the left = Page Up and Page Down
http://forum.xda-developers.com/viewtopic.php?t=41060&sid=fe9919e547cea5c146f1de0d7156a30a
To reset to default, soft reset the phone.
To make the program run after reset, put a shortcut at /windows/startup
Smartskey now includes a configuration file so you can make your own settings like which Soft Keys to alter, whether to use the Close/OK function to really close or only hide a program and an exception list for the Close/OK function.
That’s all great, but the best enhancement is the integration of the OMAP overclock program. From Smartskeys configuration you can overclock your processor to a configurable speed at start up, and even better, have that automatically activated after your devices comes back up from a soft-reset.
You can find Smartskey on
http://htcwizard.westlands.org/wp-content/uploads/2006/02/smartskey0.4.zip .
It includes the program itself, the configuration file and a readme.pdf . It does not include the OMAP overclok program, but I have it here for you:
http://htcwizard.westlands.org/wp-content/uploads/2006/02/OmapClock.exe
2. More MDA Vario Settings to Alter:
Word
Open Word
Menu>Options
Check the box “Save to storage card”
Other Settings
Check the box “Remove from display” (start>settings>today)
Check box “Cleartype”
Start>Settings>Personal>Input>Word Completion>Uncheck “Suggest words when entering text”
Start>settings>Personal>Menus: select which 7 programs you want listing in the start menu
Start>settings>Personal>Owner Information>Set Stuff in Identification; also look at “Notes” and “Options” tabs
Start>Settings>Personal>Today>Items tab: Decide which programs you want in “Today” screen
start>settings>system tab>Regional Settings>Choose your location
Start>Settings>Systems Tab>Screen>Cleartype tab>Enable ClearType
Registry Tweaks
(If you have installed RegistryWizard, you don’t need to read this section as you can do it all easily from that program)
These are all quotes I've compiles from other forums. I think I've done most of these and they work. Select whichever you would like to apply to your MDA device. You're going to need a registry editor. I strongly recommend Vidya Pocket Registry Editor. After you have made all the changes you want, soft reset the device to get them to “kick in”.
Improve Performance Generally
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=8192
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\EnableCache=1
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize=8192
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\
MSFlash\FATFS\Filters\DataCacheSize=8192 [this needs adding]
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ MSFlash\FATFS\Flags=40 [this needs adding]
All values are D-values
Caps/Shift Keyboard Notifier on Screen
Go to:
\HKCU\ControlPanel\Keybd
Create the registry entry called EnableIndicator and assign the DWORD value of 1
After soft-resetting the device, an indicator will appear next to the keyboard icon on the bottom of the screen! Tapping the Shift key shows a "C" while tapping the Dot key shows a dot! Very cool!
Keep the GPRS Connection Active At All Times
Remember, you’re only paying for the amount of data that is transferred; so why not keep the GPRS connection active all the time rather than waiting 1-2 mins for the device to connect every time you want to browse the net? You don’t pay anything for an active GPRS connection when you are not in internet explorer.
HKLM\Comm\ConnMgr\Providers\{7C4B7A3...}\Connections\GPRS...\
change value "AlwaysOn" from 0 to 1
Store Internet Clutter on Your SD Card to Save Device Memory
Put IE cache on storage card instead of memory; this increases the performance of your device. This hack will increase your available ROM memory and people have reported storage gains of over 9 mb. You will need to have a storage card with some free memory installed to utilize this hack.
First open up internet explorer and navigate Menu>Tools>Options>Memory
Press the delete files button to clear the cache
Press delete the cache
Press delete the history
Then open up file explorer from the programs folder in the start menu.
Navigate to the Storage Card and make sure that you are in the base directory of the card.
Then create an I.E. folder and within that folder create a folder called “cache” and “history”
Open up a registry edit program
Navigate to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache"
Change the default value "\Windows\Profiles\Guest\Temporary Internet Files" to "\Storage_Card\ie\cache"
Change the other values in the Shell Folders section of the registry to the folders you created and then soft reset.
Be warned that you will create errors in I.E. if you do not have a storage card inserted with those directories on it while you are surfing from now on.
Get a Different GPRS/EDGE Icon
Registry: HKLM\Drivers\BuiltIn\RIL
Key: EnableDifferGprsEdgeIcon (dWord)
Value: 0 = disabled
1 = enabled
Disable SMS Received Notification – switch it off if it annoys you
Hkey_current_user\software\microsoft\inbox\settings\SMSDeliveryNotify
Change Dword: 1  0=off
Disable Message Sent Notification
Registry: HKLM\Software\Microsoft\Inbox\Settings
Key: SMSNoSentMsg (dWord)
Value: 0 = disabled
1 = enabled
Turn On GPS Application (GPS not GPRS ie Navigation Stuff)
First of all, your MDA does NOT have GPS built-in; let's make that clear from the start.
However, Windows Mobile 5.0 includes a GPS Control Panel for ease of configuring Bluetooth GPS devices. This includes creating 'virtual ports' so that multiple programs can access the same NEMA GPS stream from said BT/GPS device. This is helpful for anyone who uses GPS for Navigation, War-Driving and lots of new emerging location-based programs which use GPS information available to your MDA.
Unfortunately, the Registry Wizard for tweaking the MDA available in this FAQ and over at xda-developers does not work with the T-Mobile ROMs. You have to manually edit the registry by following these instructions:
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2"
The GPS panel will now show up in your connection settings
***Note: You must delete 'Redirect' and 'Hide' keys completely***
Soft restart, wait 30 seconds, restart and viola, GPS Control Panel is now enabled.
NB 2=show; 1=hide GPS icon
How I set-up (after BT pairing with the GPS)
Open the new GPS Icon, I then set my GPS Settings on the MDA for 'GPS Program port:' to COM8 (the 'virtual port' for your programs to access the same GPS data) .
Then set the 'GPS hardware port:' to COM6.
Also set the Baud Rate to 9600 (default for my BT/GPS unit)
Check the box 'Manage GPS automatically'.
I'm using WiFiFoFum2, Socket MyNavigator and VisualGPSce to simultaneously run utilizing my BT GPS device. It works flawlessly.
Enable 802.11g WIFI Speed (rather than the default 801.11b)
For more info:
http://forum.xda-developers.com/viewtopic.php?t=38898
1) Locate the following key: HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
2) Add the following key:
name: dot11SupportedRateMaskG
D value: 8
Glyph Cache
Your MDA uses a section of the memory called glyph cache to store your fonts' glyphs and other graphical outputs for things like gaming. You can modify standard graphic rendering so that games run more smoothly with faster graphics. Noted improvement especially for racing, action and arcade games.
Enable Cleartype in Landscape mode
Clear type smoothes the edges of screen fonts for many programs to make reading easier and make your device appear more slick. You can turn this on by going to Start>Settings>Systems Tab>Screen>Cleartype tab>Enable ClearType
However, if you view anything in Landscape mode (by opening the keyboard for instance); for some reason, landscape doesn’t work in this mode. To enable it in landscape mode too, do this to the registry
HKLM\System\GDI\ClearTypeSettings
Key: OffOnRotation (string)
Value: 0
(NB 0 = on; 1 = off)
Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show
Alter Horizontal Scrollbar Width
Registry: HKLM\System\GWE
Key: cyHScr (dWord)
Value: 13 = default
Alter Vertical Scrollbar Width
Registry: HKLM\System\GWE
Key: cxVScr (dWord)
Value: 13 = default
Alter Taskbar Date/Time
Registry: HKLM\Software\Microsoft\Shell
Key: TBOpt (dWord)
Value: 0 = Nothing
1 = Time
2 = Date
3 = Time and date
Enable Bluetooth Receive
Registry: HKLM\Software\Microsoft\Obex
Key: IsEnabled (dWord)
Value: 1 = enabled
2 = disabled
Increase Font Cache
Registry: HKLM\System\GDI\SYSFNT
Key: CS (dWord)
Value: 0 (Default)
4096
8192 (preferred)
16384
Store Internet Clutter on Storage Card
Registry: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\shell Folders
Key: Cache (string)
Value: \Storage Card\Temporary Internet Files
\Windows\Profiles\guest\Temporary Internet Files
Disable IE background sounds
Registry: HKCU\Software\Microsoft\Internet Explorer\Main
Key: Play_Background_Sounds (dWord)
Value: 1 (Default)
0 Disabled
Alter the Default Input Method
Registry: HKCU\ ControlPanel\SIP
Key: DefaultIM (string)
Value:
Keyboard {42429667-ae04-11d0-a4f8-00aa00a749b9}
Letter recogniser {42429690-ae04-11d0-a4f8-00aa00a749b9}
Block recogniser {42429691-ae04-11d0-a4f8-00aa00a749b9}
Transcriber ***0034DD0-2AD4-11d1-9CB0-E84BE8000000}
Phone pad {51A2CB38-154E-4C92-A625-A83871C99EC2}
OTHER USEFUL THINGS YOU SHOULD KNOW
Changing the Clock
You can change out of 24 hour clock mode by going to regional settings and choosing a non-capitalized option like hh:mm:ss
Switching between vibrate and ring mode
Hold down the Comm Manager button for a second or two on the side of the device above the volume slider. This will toggle the unit between silent (with vibrate) and your regular ringer on settings.
What do the LED lights on the front indicate?
Left LED:
Blinking blue - bluetooth enabled
Blinking green - Wifi enabled
Right LED:
Blinking green - Phone enabled
Blinking orange - Battery Low
Solid orange - Charging Quote:
Note: the right led blinking orange could also mean that you have an alert in addition to the low battery. It is dependant on how you set up your notifications.
Installing Your Own Sounds for Ring Tones, Alarms and Notifications
You need to have a set of “ring tones” and “alarms and notification sounds” in two separate folders to begin with on your PC.
Make sure those in” ring tones” are in mp3 format
Make sure those in “alarms and notifications” are in wav format
Connect and synchronise your device with the computer
On your PC:
Open the ring tones folder
Copy the mp3 files you want
On ActiveSyn, Click on Explore>My Device>Windows>Rings Folder
Paste them there
On your PC:
Open the “sounds and notifications” folder
Copy the wav files you want
On ActiveSyn, Click on Explore>My Device>Windows
Paste them there
That’s it. Now you should see them all. If you can’t see one or two, it is probably because they are too big in size.
Also I neglected to mention that you can load them on the minisd card (obviously if you have one) to the root folder and they will work. To change it to your new ringone, go to settings > sounds and notifications > notifications tab > change the event to incoming call check play sound and select the sound
Bluetooth Messaging
I've seen people send and receive messages via bluetooth with regular phones like Nokia, and I was wondering whether this is possible with a T-Mobile Vario (Windows Mobile 5). Would I need to install any application for this? Thanks.
Well i think theyre not really sending SMS Messages.. these are actually Notes. You don´t need a program for it. Just create a new Note/Text-File and send it via Bluetooth!
I hope this document has proved useful.
this is a very very nice guide to wizard starters
That's great! Good work.
Superb!
This is great for new users!
mehayuk said:
Bluetooth Messaging
I've seen people send and receive messages via bluetooth with regular phones like Nokia, and I was wondering whether this is possible with a T-Mobile Vario (Windows Mobile 5). Would I need to install any application for this? Thanks.
Well i think theyre not really sending SMS Messages.. these are actually Notes. You don´t need a program for it. Just create a new Note/Text-File and send it via Bluetooth!
Click to expand...
Click to collapse
Very useful guide thanks
the bluetooth app for sending messages and bluejacking is here:-
http://www.modaco.com/index.php?showtopic=241921&st=0
or like you say you can send text files via bluetooth
R
help
How do you install .cab files?
Re: help
diesel1218 said:
How do you install .cab files?
Click to expand...
Click to collapse
ActSync them to your device and run them using file manager.
Re: help
diesel1218 said:
How do you install .cab files?
Click to expand...
Click to collapse
1. Open the Drawer.
2. Place Manila Folder in the Drawer.
3. Close the Drawer.
Now it isn't always this easy. If there is securoty in place you will probably need a key or combination to unlock the Drawer before you can open it.
Also, these instructions assume that you have enough space in the Drawer for the Manila Folder and that you don't need to install any "Hanging Device" as it is already installed if needed.
Excellent read
This was a really helpful guide thanks so much for taking the time and care to produce something so readable and useful.
Two things don't make sense to me:
What is the benefit of having a backup that doesn't include my PIM data? Also, even if I could see the point I don't know how to do it. The moment I started installing my "essentials" was the moment that ActiveSync synced all of my PIM data.
Why backup before tweaking the registry? Wouldn't you want these included in the backup so that you only have to do them once?
reg editor on sd card?
do i install the registry editor on the sd card or directly on to the device?
thanks!
does it will work US T-Mobile MDA (not Vario)? thanks
I think we should all help and contribute to updating this. This is a VERY useful guide...as I've only had my MDA for 4 days and I'm learning more and more everday. ..
Re: reg editor on sd card?
simshady said:
do i install the registry editor on the sd card or directly on to the device?
thanks!
Click to expand...
Click to collapse
Either should be fine for programs like that. Generally anything that runs on the today screen should be installed directly to the device, most other programs are OK on a storage card. There are exceptions....best bet is to just give it a try
Bluetooth Messaging
I've seen people send and receive messages via bluetooth with regular phones like Nokia, and I was wondering whether this is possible with a T-Mobile Vario (Windows Mobile 5). Would I need to install any application for this? Thanks.
Well i think theyre not really sending SMS Messages.. these are actually Notes. You don´t need a program for it. Just create a new Note/Text-File and send it via Bluetooth!
If u r still interested
Using "btCrawler" might be solution. Search for in this forum or google I do not remember right now..
That's great mehayuk!!
Very useful!
As you seem quite clued up with tweaks and stuff, u may be able to help me on a couple of other things. (I'm only a n00by!)
I'm left handed, so using the stylus on the scroll bar is fiddly. Is there a registry hack/tweak to swap it to the LHS?
Is there a program to manage GPRS/WIFI more effectively? When I use my mobile at home I connect it to my wifi network to browse the net or go on IM (if I can't be bothered booting up PC etc). Yet my phone still wants to connect to GPRS! Even tho it's got a perfectly good source for checking my emails/browsing etc....
Hope u/someone can help, and thanks again for the guide, you must've put a lot of effort in.
Chewy
Fantastic guide, thanks.
Matt (about 10 days old in the Wizard world - and already my wife hates me/it! lol)
You are a genius for taking the time to make such a long and detailed guide. I wish you had made it a few months before you did because I had to learn it all the hard way
A new user is always lost at first and this guide really puts them onto the right track. Good work!
Smartskey Quirk
For an otherwise outstanding product, you would think they could find a way to make the program memory resident (in other words, not have to be reset every time you do a soft reset). And no, I don't feel like spending more money for memmaid, I already bought more software than I should have to make this thing work the way I want it too.
How can I alter my registry to make this reload on bootup?
Smartskey Quirk
For an otherwise outstanding product, you would think they could find a way to make the program memory resident (in other words, not have to be reset every time you do a soft reset). And no, I don't feel like spending more money for memmaid, I already bought more software than I should have to make this thing work the way I want it too.
How can I alter my registry to make this reload on bootup?
smartskeys link is dead
hi. i"ve been trying to download smartskeys forever and it keeps giving me the "404 Not Found
The requested URL /wp-content/uploads/2006/02/smartskey0.4.zip was not found on this server."
incase it matters, I registered with xda and I'm signed in when i hit the download link. any suggestions?
thanks, adam

HTC P3600 Oficial ROM Upg - Where's GPS???

Hi!
I did the oficial ROM upgrade and everithing seems to work fine except that i can't seem to find the GPS anywhere?
Can anyone help me?
Thanks,
JP
Hiden GPS Icon
Having tried the new HTC rom I found that the GPS WAS enabled (Tried it with Tomtom 6) but the GPS Icon in the settings menu is still hidden.
To enable/unhide the icon use a registry editing program and change the numerical value of the DWORD string that reads 'HIDE' from '1' to '0', then soft reset the device.
There are a couple of threads that can explain how to do this in more detail elseware on this forum.
1.
Sometimes GPS takes too long to fixup
Hi!
I discover the problem. Sometimes the GPS takes 10 or 15 minutes to fixup!!! I've read that this is a known problem without solution.
Thanks anyway.
JP
jpierre70 said:
Hi!
I discover the problem. Sometimes the GPS takes 10 or 15 minutes to fixup!!! I've read that this is a known problem without solution.
Thanks anyway.
JP
Click to expand...
Click to collapse
Not first fix, on clear sky, without moving during fix? I've read only one complaint, and it didn't say the conditions that made that fix so long.
devious246 said:
Having tried the new HTC rom I found that the GPS WAS enabled (Tried it with Tomtom 6) but the GPS Icon in the settings menu is still hidden.
To enable/unhide the icon use a registry editing program and change the numerical value of the DWORD string that reads 'HIDE' from '1' to '0', then soft reset the device.
There are a couple of threads that can explain how to do this in more detail elseware on this forum.
1.
Click to expand...
Click to collapse
In the regisrty there are a lot of folder wich one contain the DWORD?
if this is your level of understanding of the registry I strongly suggest you DO NOT try and modify until you thoroughly research it!
You may end up having to hard reset your device.
I already modify it last time but i forgett where theDowrd is..Under wich menu on the registry
OK Brigate- sorry just wanted to warn you!
I would do a search- this took me 10 nano seconds ;-) It's quicker than posting and waiting for a reply.
/snip
HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Add a DWORD called "Group" and give it the value of "2" (dec) keep the Hide key but change the value to 0 and delete the redirect value and soft reset
If you have a GPS device, you can add a GPS settings icon to your Start > Settings menu using:
HKLM\ControlPanel\GPS Settings\Group = 2 (DWORD decimal)
HKLM\ControlPanel\GPS Settings\redirect <-- delete, or rename, this value
Note that '2' stands for the Connections tab, '1' is System and '0' would be Personal
Note also that this has reportedly disabled one person's USB connectivity. To restore, set "GPS Program Port = None", "GPS Connection Port = None", "Automatic GPS Management = on"
/ snip
This rings a bell- I tried it a long time ago on my M600 thinking the icon would help (it just stopped my BT GPS working!)
Well thx a lot
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
BrigateGB said:
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
Click to expand...
Click to collapse
JUST TRY IT A SECOND TIME, I HAD THE SAME PROBLEM,
IS THERE A WAY TO TURN GPS OFF. I LIKE TO USE THE BLUETHOOT UNIT
BrigateGB said:
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
Click to expand...
Click to collapse
Don't soft reset the phone, power off and on after by pressing the power button on the side until a question shows in the screen.
I found a programm for Trinity it´s Trinity Hacks and it do this.... So thx for the trick

mxip files ... please prove me wrong :)

In learning how to cook from the many good resources on this site I have read in several places that the contents of the mxip* provxml files will get re-written on every device boot. This means that some changes to the regsitry must be cooked in, or they will be lost on a reboot.
One such thread/post that details this is here.
Now the official thread from MSDN on these files is here, and it says this:
An Image Update Package can contain two types of provisioning files:
Cold boot files that will be processed by Configuration Manager only when the device is cold booted. The provisioning file name must have one of the following formats:
mxipcold_PACKAGENAME_*.provxml
or
mxip_PACKAGENAME_*.provxml
where PACKAGENAME is the name of Image Update package.
These files should contain settings that you intend to be applied only during cold boot.
Update files that will be processed by Configuration Manager both when the device is cold booted and, if their associated packages have been updated, during Image Update. The provisioning file name must have the following format:
mxipupdate_PACKAGENAME_*.provxml
All settings contained in these files will be re-applied whenever their associated packages are updated, regardless of whether they have or have not changed. Therefore, these files should only contain settings that you intend to be reapplied every time their packages are updated.
Microsoft recommends that you use a three-digit number in the name of your .provxml files in ROM, such as mxip_opr_100, mxip_opr_200, mxip_opr_300, so that there is an adequate number of ordinals to identify successive versions of the file.
Note Mobile Operators should avoid using provxml files to override (shadow) entries in Microsoft-owned provxml files​Note Mxip_*_*.provxml is imported only at cold boot when the device is initially configured. In effect, mxip_*_*.provxml and mxipcold_*_*.provxml are handled the same.​Note Mxipupdate_*_*.provxml files are imported after cold boot and when the package containing them is updated.​Now the reason I am posting is based on my experience and the underlined section above. This seems to state that a "cold boot" is equal to "when the device is initially configured."
What this means is that these mxip files DO get processed on a cold boot, but that a cold boot does not mean a reset/full-power off, but rather a CLEAR STORAGE.
My own tests show this to be the case. For instance, I have taken reg entries from several mxip, mxipupdate, and mxipcold PROVXML files which shipped with the latest AT&T stock ROM (decompiled with KaiserKitchen).
When I delete these values on my device THEY DO NOT COME BACK AFTER A REBOOT.
Based on these two facts it would seem to me that any statement which claims that these provxml files re-write the registry at every reboot is incorrect.
I would love for this to be corroborated by others or in fact, I would love to be proven this incorrect.
Not only do I want to know what it right...but I have a particular instance where a registry key is getting re-written at every boot. This value being overwritten is not defined in any XML, so my assumption is a DLL or other system service is resetting it. At this point, the particular value is not important to the discussion but if indeed there were a way to define in a provxml file a registry key which would be overwritten at reboot, that would be helpful.
Please advise!
thx
Anyone?
I'm looking for any proof that any xml files cooked into a ROM can reset registry entries on a standard reboot.
Cold-reboot = hard-reset, and as such yes all your provisioning files will re-run.
However it seems to me that the only thing which would re-apply a registry key would be a service/application/driver which is hard coded to do so and not anything specified in a provisioning file.
bengalih said:
Anyone?
I'm looking for any proof that any xml files cooked into a ROM can reset registry entries on a standard reboot.
Cold-reboot = hard-reset, and as such yes all your provisioning files will re-run.
However it seems to me that the only thing which would re-apply a registry key would be a service/application/driver which is hard coded to do so and not anything specified in a provisioning file.
Click to expand...
Click to collapse
If by "standard reboot" you mean soft reset then of course no settings are loaded into registry from any of your provisioning or other XMLs (unless you have some specifically set to be loaded at start up). The registry settings stay the same as you had them before soft reset.
But obviously they are read and loaded into reg after every hard reset, not only because autorun (customization) starts after hard reset - what does not happen after soft reset - but also because registry itself is recreated 'from scratch' after hard reset, *with* the settings from your XMLs (of course if there are pointers to them in your settings, otherwise even if they are there they will be 'excluded' or 'omitted' and become what I call "ghost files" - a files that don't do nothing but taking up space /edit: best example of XML "ghost file" is i.e. config.xml which didn't have its pointer in Config.txt thus all its registry settings were entirely omitted on every hard reset, as I saw in one of the ROMs).
You won't find "any proof that any xml files cooked into a ROM can reset registry entries on a standard reboot" because it is impossible (again - if by standard reboot you mean soft reset and not hard reset).
Thanks for your reply. What you are saying backs up what my beliefs are and my experience suggests. I don't want to call anyone out for providing false information (unintentionally I'm sure). But I have seen several posts by well regarded members that speak differently.
-888- said:
If by "standard reboot" you mean soft reset then of course no settings are loaded into registry from any of your provisioning or other XMLs (unless you have some specifically set to be loaded at start up). The registry settings stay the same as you had them before soft reset.
Click to expand...
Click to collapse
Again, I agree. However how do you explain this post and the others in the thread supporting the fact that a certain registry setting must be cooked in and will not survive a reboot?:
http://forum.xda-developers.com/showthread.php?p=2106160#post2106160
Also, what do you mean by "unless you have some specifically set to be loaded at start up"? How do you have a registry key specifically set to be loaded at start up? All regsitry keys are loaded at start-up (obviously). I pick out this comment because maybe this is the crux of the issue, if there is something I am unaware of. Are you saying there is a section in the registry that will automatically load certaind reg entries at boot (effectively overwriting them)? I would be unaware of anything like this, so please explain the statement.
-888- said:
But obviously they are read and loaded into reg after every hard reset, not only because autorun (customization) starts after hard reset - what does not happen after soft reset - but also because registry itself is recreated 'from scratch' after hard reset, *with* the settings from your XMLs (of course if there are pointers to them in your settings, otherwise even if they are there they will be 'excluded' or 'omitted' and become what I call "ghost files" - a files that don't do nothing but taking up space /edit: best example of XML "ghost file" is i.e. config.xml which didn't have its pointer in Config.txt thus all its registry settings were entirely omitted on every hard reset, as I saw in one of the ROMs).
Click to expand...
Click to collapse
I think this pretty accurate. However, I think technically the registry is created at cooking from the .REG files. The .REG files combine to make the .hv files, which are basically the flat file system that gets loaded to make the registry. The .XMLs which contain registry entries then get additionally loaded during customization, but the majority of the registry already exists in the .hv files. Would you agree?
-888- said:
You won't find "any proof that any xml files cooked into a ROM can reset registry entries on a standard reboot" because it is impossible (again - if by standard reboot you mean soft reset and not hard reset).
Click to expand...
Click to collapse
Right, ok, I am thinking as much. But still would like to understand why posts like the one I referenced claim that settings need to be cooked in or they will be lost on a reboot. These posts clearly seem to mean a standard-reboot, as a user who makes a regsitry change would obviously expect that change to be lost on a hard-reset. These posts definitly infer that the changes get lost on a "standard" reboot.
Cold Boot = Hard Reset or Clear Storage or Nand/OS Format (via Mtty/Ptty)
Provisioning xml's are most typically used by Operators to limit functionality, i.e AT&T uses them to disable the "Multiple Data Sessions Hack" by changing the AGPN RIL settings. These are used to overwrite certain registry settings established on boot before the OS even loads. Similarly, the standard provxml files do NOTHING, unless called for. This does not happen at a soft reset, only at hard reset & the difference is in the type of registry setting you are targeting. As stated before, some registry settings are loaded very early into the boot cycle, before the os even initializes, & are persistent so that they cannot be changed manually period. The RIL settings, used to enable the use of MediaNet & BBC concurrently are one such example. Provisioning Xml's only run when called for or when manually initiated with the use of a program capable of importing the xml's, such as SKTools.
There are indeed many setting that will revert when a soft reset is made.
bengalih said:
Again, I agree. However how do you explain this post and the others in the thread supporting the fact that a certain registry setting must be cooked in and will not survive a reboot?:
http://forum.xda-developers.com/showthread.php?p=2106160#post2106160
These posts clearly seem to mean a standard-reboot, as a user who makes a regsitry change would obviously expect that change to be lost on a hard-reset. These posts definitly infer that the changes get lost on a "standard" reboot.
Click to expand...
Click to collapse
i think these guys are gettin confused with reboots... maybe i'm wrong, but they also said that the hives get rebuilt on every reboot, i really doubt it...
agreed that provxml files only apply to a hard reset, but also did a little testing with that particular reg key... changed both values, reboot, activesync'd and surfed the net, reboot, same values, changed them back to original, reboot, everything sticks... i don't know what these guys are talking about, but it doesn't make any sense...
also, i can't find those settings in the stock att provxml files in OperatorPKG...
Thanks for replying GSLEON3. I understand everything you are saying about PROVXMLs, and I think we are on the same page, but I am still confused about some things you are saying...
For example in your post about the AGPSNVSetting. You state that you need to change it in the PROVXML file. You also state:
THIS HAS TO BE COOKED IN, REG EDITS AFTER INSTALLING WILL NOT STICK
Click to expand...
Click to collapse
My question is, what do you mean by it won't stick? If I go in with a registry editor after I have flashed the ROM and try to change it from 6 to 5. What happens? Either:
A) When I reboot the value will revert back to 6.
B) The value will remain at the 5 I set it to, but it won't actually work.
If the answer is A, then I ask how? How does it get set back to 6 if we established that the PROVXML files only get run during a cold boot/reset?
If the answer is B, then i ask how? A reg entry is a reg entry is a reg entry. If the value is set to 5, then whatever service reads that value should be seeing a 5. It shouldn't matter if that value was originally 6, as long as it is now 5 (and remains that way after a reboot).
This also leads into the comment you just made:
some registry settings are loaded very early into the boot cycle, before the os even initializes, & are persistent so that they cannot be changed manually period
Click to expand...
Click to collapse
I don't know if I totally agree with that. I think it depends when the OS loads. I would think that since all your registry entries are stored in the .hv file on your device that the OS needs to load first in order to initizlize the drivers to read that .hv file and mount it to the registry. That might just be nit-picky if you mean before you get the higher leverl drivers and GUI initialized.
But, the question still is what makes them "persistent so that they cannot be changed"?
In summary, a provxml only writes a reg entry ONCE, on cold boot/reset. This value appears in my experiments to be able to be changed afterwards and sticks (meaning it stays the same value after a normal reboot). Why then would a registry entry need cooking in instead of just a manual change afterwards?
I am not trying to argue here, OR prove you wrong.. I am just really trying to understand why you state what you do.
Thanks!
If you change the registry and then soft reset via pressing the reset button within a few seconds upto even a couple minutes then your edit is lost, as the registry is cached in ram and only written out after a bit...
You can get an edit to "stick" by
doing the change, then wait a bit, then power off, then power on, then wait a bit, then soft reset. All the above it to convince WinMO to flush the cache.
Or use any software-based soft reset (those let the OS know its resetting, so it flushes the reg cache.
Either that, or there is something running in the background resetting registry entries. HTC_Guardian, for example, is/was an app used to reset connection settings, at least under sprint. That evil thing slammed the "correct" values into the registry every 5 minutes or so... what a waste.
In either case, the proxml things only run on a hard reset/first boot init.
schettj said:
If you change the registry and then soft reset via pressing the reset button within a few seconds upto even a couple minutes then your edit is lost, as the registry is cached in ram and only written out after a bit...
Click to expand...
Click to collapse
Thanks for the feedback. I don't buy that however (at least not on the Kaiser). I can make a regsitry change with say, PHM and the split-second after I make that change I push in the reset button... that change is kept.
If it does that for one reg entry, it should do that for all. I don't believe that some entries get cached like that and other don't
schettj said:
Either that, or there is something running in the background resetting registry entries. HTC_Guardian, for example, is/was an app used to reset connection settings, at least under sprint. That evil thing slammed the "correct" values into the registry every 5 minutes or so... what a waste.
Click to expand...
Click to collapse
See, I think you are correct here. I believe that in all the cases where I have seen a registry entry get reset on a reboot is because a driver is hard coded to reset it at boot time. On the latest AT&T release for instance if you change the LockLevel for backlight it is always reset to 0 after a reboot. There is no reference to this registry value in the rgu's or provxmls in the decompiled ROM.
schettj said:
In either case, the proxml things only run on a hard reset/first boot init.
Click to expand...
Click to collapse
agreed
bengalih said:
Thanks for the feedback. I don't buy that however (at least not on the Kaiser). I can make a regsitry change with say, PHM and the split-second after I make that change I push in the reset button... that change is kept.
Click to expand...
Click to collapse
You don't have to believe it, but i know this can be true. I can't speak to the cause, but i know that often times i must make my entry and then exit the program before i soft reset or my settings will not be kept. Also, I have experience many times where i will make a registry edit, and if i do not soft reset before doing anything else then my edit does not take effect. For example, i'll reply to a sms before soft resetting and my entries won't take effect. For this to be true then the original entries must be stored somewhere, at least temporarily. It certainly could depend on the software used though, and may have nothing to do with the rom. As i said, i can't speak to the reasons why this would occur as well as man others, but i can state my experiences through making thousands of registry changes.
I just tested this. 5 times, 5 different registy entries using PHM Reg Editor with both the stock AT&T and HTC 6.1 ROMs.
Each time I made a change, I pushed my stylus into the reset button immediately after clicking on OK to the change.
In every case, my registry entry remained the way I changed it to prior to boot.
I would be interested if you could recreate results to the contrary and if so what ROM and registry editor you are using.
scotchua said:
You don't have to believe it, but i know this can be true. I can't speak to the cause, but i know that often times i must make my entry and then exit the program before i soft reset or my settings will not be kept. Also, I have experience many times where i will make a registry edit, and if i do not soft reset before doing anything else then my edit does not take effect. For example, i'll reply to a sms before soft resetting and my entries won't take effect. For this to be true then the original entries must be stored somewhere, at least temporarily. It certainly could depend on the software used though, and may have nothing to do with the rom. As i said, i can't speak to the reasons why this would occur as well as man others, but i can state my experiences through making thousands of registry changes.
Click to expand...
Click to collapse
Hard reset, softt reset, rom update, cold boot, warm boot, clear boot,image update...
Hello
I found some usefull links.
The well-known articles about mixp, mixpudate and mixpcold...:
msdn.microsoft.com/en-us/library/ms889522.aspx
msdn.microsoft.com/en-us/library/bb737254.aspx
Definitions of Power States Transitions
msdn.microsoft.com/en-us/library/aa450592.aspx
Definitios of "clean/cold/warm booting" and their issues:
msdn.microsoft.com/en-us/library/ee490762.aspx
Terms of "Image Update"
msdn.microsoft.com/en-us/library/bb737478.aspx
msdn.microsoft.com/en-us/library/bb737638.aspx
I think that a Soft-reset is like a warm-boot, a Hard-reset is like a clean-boot and you only have to remove all de batteries (all power off) to get a cold-boot. I now understand why some fellows tells to me to remove the battery two minutes .
So
remove the battery or exhausted -> cold boot -> mixp & mixpcold & mixpupdate
hard-reset -> clear boot -> mixp & mixpcold & mixpudate
soft-reset -> warm-boot -> no mixp*
rom update -> image-update of all parts of the rom -> mixp & mixpcold & mixpudate
So normally, every time that you change the rom or order a hard-reset you mobile should execute all mixp*
From time to time something goes wrong when processing mixps during the fisrt boot after a rom-update and then you need to order a hard-reset to execute all mixp*again. I suspect that this happens when hard-spl does not force a cold-boot after the rom-update process and a warm-boot happens.
Finally
File System Boot Process. Describe which and when the actions happens:
msdn.microsoft.com/en-us/library/ee490357.aspx
Best regards.
I know this reply is seriously late in coming, but I was working thru a few registry issues and fixing a few chef cooked roms and this thread popped up.
Maybe it'll help someone in the future, trying to understand this dying architecture. (Curse you M$)
What you are failing to see, is that there are several ways that provisioning xml's can be delivered. Via cab files, straight provxml file or even xml's called on startup, not justat cold/hot boot.
AT&T as well as other OEM's used to have a bad habit of SHADOWING MS or HTC registry settings (Overwritting reg values thru use of xml provisioning). AT&T would call for their OEM Network Provisioning xml to silently install at every reset, much like a 2577 cab file. The OEM can also use the OAL (OEM Adaptation Layer) to overide or change settings in the registry, even thru the use of provisioning xmls.
The old AT&T APN provisioning via cab file we saw in Kaiser & first TP rom is a very good example of bad practices with regards to xml usage.
You can also set certain reg keys to be persistent. Try deleting the "Windows Default" (CHome) today registry key. without negating the setting with a nocharacteristic xml setting or a reg such as [-hklm/current user/etc...] this key will be persitent and also cannot be deleted.
Provxml's are good for moving things & certain settings, however, I have come to believe that registry optimization is a key component in device performance & with the new HV editing tools, you are better off adding entries directly to the hive & keeping the windows directory clean & light.
I wish only more chef's would utiolize these new tools & features. Have you ever gone thru a cooked rom registry & found all of the hanging & invalid registry keys?
The common cooked rom, even from the bvest cooks at XDA, usually have anywhere from 12% to 24% of empty or invalid registry settings. On top of that, you can have upwards of 12% - 18% invalid system type registry settings & then another 24% - 28% invalid user type registry settings.
The average cooked rom has a reg size of 811088. This number when optimized with proper settings & true removal of defunct values/keys would be more in the 647000 size range. That is common for a good chef, now imagine the guy using the standard rom kitchen based on a straight OEM rom. Cooks forget that registry values come from xml's, cab's, registry hives, even some executables. Setting are often duplicated between packages and hive and OEM provisioning files. This means that just because you remove a package from your kitchen does NOT mean that all the related registry data for that package will also be removed. For this you really need to modify the hives manually with the new HV editing tools, or completely rebuild the hives using a newer kitchen like OS Builder that allows you to build HV files from scratch. even then I recommend usign HV editing tools to confirm nothing is left behind unintentionally.
An optimized registry absolutely means increased performance.

[Q] Changing the date layout

At home screen, under the weather panel, as you know there's date. It looks as "Mon, Jan 3" , but I want it to look like "Monday, Jan(or full name January) 3 2011" . There's a tweak option in Advanced Config program, but it doesn't work (there are some different layouts in a drop down menu and a "change" button right beside it, you can choose the layout but change button is inactive). So, I think I expressed my request throughly, is it possible to do this? How?
What values do you have under:
HKLM\\nls\overrides\SLDte
HKLM\\nls\overrides\SSDte
Thanks mate, you're the only one who rushes to help me all the time. Before placing this topic, I found something about changing the date format (http://forum.xda-developers.com/showpost.php?p=5713475&postcount=9) , and applied them but nothing changed, it was about changing the values under the ones you mentioned. Now, answers to your question,
SLDte value = dd MMMM yyyy dddd (actually this wasn't the default one, it's the format I'd like)
SSDte value = dd / MMMM / yyyy dddd (same like above again, not the default one)
Try this:
HKLM\\nls\overrides\SLDte
dddd, dd MMMM yyyy
No, it didn't work. Still same format.
Normally, you can not change this format using the registry. At least, in WWE versions. It is most likely preset somewhere in binary files. In addition, using of customized date formats for SSDte or SLDte values may cause problems with HTC Calendar items (appointments, tasks and so on) as HTC Calendar only accepts particular formats. However, if you use localized version of Windows Mobile there may be more opportunities to tweak the phone's interface. I have seen some threads on the xda-developers site containing some tips and tricks on this topic.
Yes Janissl, you're right. Yesterday, after I made some change in SSD and SLD, I realized that SMS's dates began to look weird. So I changed it back to it's default value, now SMSs are normal. And I decided not to tweak this kinda registry things, since it could cause to force a hard reset.
Maybe you can do it safer by using ACT:
http://www.freewareppc.com/utilities/advancedconfigurationtools.shtml
It's written under "Update Description".
fighter7139 said:
Maybe you can do it safer by using ACT:
http://www.freewareppc.com/utilities/advancedconfigurationtools.shtml
It's written under "Update Description".
Click to expand...
Click to collapse
I already tried that at first hand, it had an extra settings as More Settings at menü, and there TouchFLO 3D settings. It looks like, you could do this date format there, but as I mentioned at my very first message, the "Change" button is unusable.

Categories

Resources