Database Develop

Imate Rom BT Stack version

I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?

PDA2K has the same issues with the BT Stack. In fcat it is just awful.

Anonymous said:
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Click to expand...
Click to collapse
Hell, its worse than 'just awful'....
...The Bluetooth on the PDA2K is just downright unusable.....
...I am still holding my breath, praying to GOD they get a real fix out and not just a 'here ya go' patch with more problems in it......

BT version... MDA III new ROM
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...

have a hcb-30 bluetooth carkit that worked great with my Qtek 2020, but i cannot seem to get it to work with my qtek 9090....it finds the qtek allright and pairs with it, but cannot connect....my bluetooth version is 1.0.0 build 2200...
hope they get a fix out soon...

Re: BT version... MDA III new ROM
lukasz said:
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
Click to expand...
Click to collapse
I'm running v1.0.0 Biuld 2200
Mine also likes to turn the unit on every minute or two and run the battery down VERY fast...........

onurd said:
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
Click to expand...
Click to collapse
You may tried that DON'T PAIR the HBH35, Afterwards, use a Bluetooth connection wizard to add it. This may be OK to add HBH35.

I don't know how those incompetent idiots could release the blueangel with such a obvious bluetooth problem, HOW CAN THEY NOT see it! the error messeges pops up so frequently.

Go for it, version 1.5
http://forum.xda-developers.com/viewtopic.php?p=65548#65548

I couldnt get 1.5 to work on my pda2k, cant overwrite certain files... how did you do it?

I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth

I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth

you don't have it yet and you are telling other people to go for it! i dont think it works for the pda2k

Did you read or post first?????????????????
As you can see Guest and firebird say it worked to some degree for them on the PDA2K (MDAIII). Since I didn't have a BT headset to try myself I thought I would help you by pointing you to someone who had.
Read posts before blasting back.
*********************
Guest
Posted: Mon Nov 08, 2004 06:20
Subject: BlueTooth manually updated on PDA2k to 1.5.081
--------------------------------------------------------------------------------
http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.

just a warning, the ROM files he was talking about overwriting, cannot be restored by doing a hard reset, it is permanent. if it messes up you will have to re-flash your pda with a new copy of the OS. that's what i had to do since i couldnt get it to work

BT GPS (tomtom 5.21) and BT headset problem

Hi all,
first wanted to say that it is a great forum.
I just came across it couple days ago, and there has been many things that I found here that improved my Qtek 2020i.
but there is one thing that i havent found in here.
I use tomtom 5.21 with a bluetooth GPS receiver. it worked fine until I bought a bluetooth headset. If im using TT to navigate and answer a call via bluetooth headset it works fine, but when i hung up the call, then Qtek looses connection to GPS, then picks it up again in about 10 seconds but runs with a big delay. I have to restart tomtom and then it is back to normal (quite annoying when driving thru town)
any of you have that problem??
thanks for help.

Hi there,
My problem might be related : the device seems unable to use both the headset and the GPS (with TT) at the same time. I don't know why. I've got a Qtek ROM at the moment, I'll see if the latest O2 ROM with upgraded radio stack does any good.
See you.

Right. Just switched to PUG's .162 ROM with O2 stuff stripped.
Alas, it comes with Broadcom stack and there's no SPP inside so I can't connect to my GPS ... Pug if you read this, help
Cheers !

seems strange: I replashed my stock O2 bloatware & buggy 169 Rom with pug's flavour, to give me the 162 rom and Radio version 1.04.
My GPS bonds fine tihe BT, and I can use TomTOm and a BT headset at the same time. Did you flash the Radio to the (far better) 1.04) when you upgraded the Rom?
I've heard quite a few people say on these forums that for Alpine, one of the most stable & speedy setups is the 1.10 WWE Main Rom, the .162 Pug rom with the O2 stuff stripped out, and the 1.04 Radio.
Joe

Yeah actually it works fine now. I made another post while I was looking for help, because the Alpine wouldn't find the SPP service when interrogating the GPS. I simply switched the GPS off and back on, and the problem was gone. I wish I'd tried that before the dozen ROM combinations I spent the afternoon testing
And indeed, I'm now running 1.11WWE/1.04.00/1.11.162 PUGS w/o O2 stuff, and finally TT accepts to work with the headset while using the GPS. What a trip !
Cheers !

GPS Bluetooth (Nokia LD-3W)

For 2 weeks now I'm trying to get my Wizard working with this nokia GPS BT and Tomtom. I updated my rom to the 2.3 and still I'm having problems.
Sometimes it works for a week and then stops working.
Is there a way to test this BT GPS to see if it is working properly ?
I tried everthing possible, all suggestions in this post.

parrot CK3100 and Himalaya

hello,
I would like to buy a Parrot CK3100 (BlueTooth car kit), but I wonder if it works perfectly with Himalay under WM2006. Is the directory correctly and automatically loaded on the Parrot ? Are all the functionnalities of the Parrot working with the Himalaya ?
Thanks in advance for your answer,
regards
Blg

You shouldn't be able to access your contacts through Parrot CK3100.
Sascha

Ok, thanks for your answer. Have you tried the XDA II on the CK3100, or is it just a bet ?
The reason why I a m asking this question is that on a GPS device (Garmin ZUMO), the directory is automatically and correctly loaded (as well as the last received numbers and last dialled numbers). So it seems that the XDA II is able to do it.
Is there someone owning the two devices (XDA II and CK3100) who could confirm the good or bad working ?
By the way, my ROM's version is 7.0c.40CS.
Thanks in advance.
Blg

blg said:
Ok, thanks for your answer. Have you tried the XDA II on the CK3100, or is it just a bet ?
Click to expand...
Click to collapse
I use CK3000 but I would be surprised if CK3100 could access XDA II contacts.
Sascha

I understand your surprise.
But I was surprised when all my XDA II contacts have been downloaded automatically and without being prompted on my Zumo device.
Seems the WM2006 allows this (at least on my XDA II ))
This is the reason why I am looking for someone owning both CK3100 and XDA II under WM6 !
Blg

Yes, it works!
I have a Qtek 2020 (aka Himalaya) and a Parrot CK3100 Black Edition and it works (almost) perfectly.
When you turn on the ignition the Parrot activates showing the Owner Information, the Network you’re connected (operator), the Signal Strength, the Battery Level and it synchronizes the Contacts, even the ones you have multiple numbers (ex.: Thomas w/; Thomas h/ as in Thomas (work) and Thomas (home)). It even gets the last Received, Dialed and Lost calls (not always). You see an ActiveSync alike symbol from times to times showing the synchronization.
Every time you turn off the ignition (electrical circuit) it clears all information and you´ll have to wait until it synchronizes again after you turn it on.
The only glitch it has is that sometimes (1 in 100), when they «meet», the PDA starts a call to nowhere and the only way to stop it is to reset the PDA (the pen tip in the hole).
Hope this info helps
Thomas
TOFCLOCK HIMA WM6 AKU.0.7.0
CE OS 5.2.1908 (Build 18508.0.7.0)

Thanks Thomas, your advice as owner of both devices was the one I was looking for !
So, it seems I can buy the Parrot.
Thanks again !

Himalaya & Parrot Ck 3100
Hi gents :
I have both devices (Himalaya & Parrot), and almost everything is running fine.
Parrot and Himalaya synchronize automatically.
Only one thing :when conecting GPS and Parrot, if I let these devices to connect automatically, the phone sound is really bad, I have to cut down bluetooth hans free connection and retry again after few seconds.
Then, everything is OK.
Suggestions are welcome

Hi,
following ThomasScott, I have bought the CK3100. Got it today. I have tried it only few minutes but it seems to run fine. Synchro of directory is OK, and done when Parrot is on.
I will install it definitively tomorrow, and will try to connect both GPS and Parrot, to check if I have the same problem.
Blg

Is This Possible

Hi guys,
I have a touch diamond (with Telstra rom) I need to find a way to downgrade my bluetooth drivers on my device. I can hear you all asking is this guy deranged, why would anyone want to do that. Well heres the reason, I have an igo bluetooth keyboard possibly one of the greatest gadgets that has made my life a tone easier when using email. But the drivers that it has dont seem to work with my device as it does not recognise that i have bluetooth at all. This keyboard has worked with my touch dual (20key 850mhz) but not with the diamond. Is there a fix for this.
Thanks

Rather than downgrading your Diamond's bluetooth drivers, have you tried upgrading the bluetooth keyboard drivers instead to the latest available version ?
I have an original Stowaway bluetooth keyboard. I downloaded the WM5 drivers from:
http://corporate.igo.com/support/do... Support/PPC5/En/dr/Think Outside ppc5 En.zip
and the keyboard works perfectly on the Diamond even though it is running WM6.1
Good luck

Thank you that worked great!!!