Backup sd with nba files from aWizard Tool - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi,
I would like to create a backup sd, but I only have the files from the aWizard Tool (three nba files and the extended rom). And the manuals here just show it for a nb0 file...
I hope someone could help me.
km

km said:
Hi,
I would like to create a backup sd, but I only have the files from the aWizard Tool (three nba files and the extended rom). And the manuals here just show it for a nb0 file...
I hope someone could help me.
km
Click to expand...
Click to collapse
I'm not sure, whether i understood right.. Do you wanna backup full rom to SD card? If yes, click on my signature to get the tool. If not, please explain what you need..

Yes, but I want tu backup the nda files (I think OS /radio /Splash/ Logo)
And I don't have one big file.
What tool I need from your homepage?
EDIT:
It's a charmer rom I want to install.

But why?..
The only sense to have SD-Card backup is to restore FULL ROM from this Card (it has the special rom dump, and it's not readable in PC-reader f.e.).. To restore your rom partly you can use aWizard...

aWizard doesn't work. It shows after pressing writing a new os, that it found a rom in the rom folder and I should press a number. But it doesn't show me, which number. So I cannot use this tool to install the rom...
(I think I should choose the rom with the number)
So I thought I could try it with a sd-card backup...
Can I make on big file with the rom-parts?
For Information:
I have a german charmer-device with an english rom and I would like to install a german romvagain.
I have only the aWizard Tool backup of the old rom.
I don't have unlocked (cid) the phone, because I think it is not necessary, because I will install a "correct" rom back and I would loose my warrenty.
thank you,
km

Related

Restoring Extended ROM??

Hi All,
There are many posts about updating ROMs (OS & Extended) to the latest version (Eg 2.8.7.102), but there isn't much information on how to revert back to an earlier version of Extended ROM which, generally has the customisation files from the service provider.
What I would like to know is how to replace the files in the extended ROM with ones from a backup source (ie I used aWizard to copy the extended ROM and there is a RAR file of these files on the Xda-developers FTP site).
Also, I wonder what file needs to be altered (config?) so that you can cherry pick which CAB files etc to load on reset.
Finally, there are posts which seem to be saying that with the latest ROM's 1.6.x.x and above that you can no longer write files to the extended ROM.? - although you can use Total Commander to delete these files so that they don't reload on a soft reset (But probably reload after a hard reset?)
Sorry is this is going over old ground !!
Many Thanks in advance
John
With 1.6.x and above version your ExtROM is read-only.
To customize your ExtROM:
1. Backup cab files you like from ExtROM (ie the Operator ROM)
2. Flash your device using RUU
3. Test functionality of the backed-up cab files by manually installing them one at a time
4. Backup OS, Radio and Ext rom using aWizard
5. Flash your device with a 1.5.x version using RUU
6. Replace the files in ExtROM with the ones you like on the new rom (from step 3 as well as the backed up ones from step 4!)
7. Restore OS and Radio using aWizard
You now have the same rom as from step 2, but with customised ExtROM

How to cook ROM???

Hi, exist any "how to" cook ROM for our Treo750? I'd like to try make my own ROM.
?
any ideas? somebody?
Customize ??
I only know how to customize rom by use exists rom maybe Ruu_signed.nbh or Cheeimg.nbh .
By reading from wiki XDA http://wiki.xda-developers.com/index.php?pagename=Hermes_ROM_kitchen because of Treo750 base on Hermes.
if you want to know how to do , what to do read it from ROM Donalds topic but you can choose any tool for me prefer and (almost) use Want more Storage? Here you go! it has batch file to do all process and 'der hermes rom koch' is good for edit all hv file (hv file contain all registry setting for me I prefer to do after flash by mortscript so I only use batchfile).
Please notify once we use exists rom it mean (for me) we only use to add file or remove file with normaly we can't remove it from rom by easy way such as delete by file explorer because of system will said you can't not delete system file in rom example for me I never use Powerpoint,OneNote so I decide to customize WWE 19199 by remove 2 file and some file and rebuild back to Cheeimg.nbh and after flash and boot I got 67MB free ram for storage and 29MB for Program.
IF you need to make new one from zero I still not information I try to search from google but just know a little due to Treo has square 240x240 and very few people use that seem to be hard to find an information and sure if I got it I will let you or anyone know.
k101d

Extract data from EXT Rom

hello all good folks
can you please help me to extract ext rom from certain rom (second rom on list)
Code:
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
Direct Link
Code:
http://www.t-mobile.hr/mdasw/RUU_Prodigy_3821_382124_026911_TMO_HR_WWE_Ship.zip
i tried a lot of tools but none of them worked (i need cabs form that ext rom)
ala_borbe said:
hello all good folks
can you please help me to extract ext rom from certain rom (second rom on list)
Code:
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
Direct Link
Code:
http://www.t-mobile.hr/mdasw/RUU_Prodigy_3821_382124_026911_TMO_HR_WWE_Ship.zip
i tried a lot of tools but none of them worked (i need cabs form that ext rom)
Click to expand...
Click to collapse
Tse easy way is... I don't know .
The hard way is to flash it to your mobile & with a good file manager (Resco Explorer, Total Commander) copy the cabs that you want.
thank you for you answer, but back then i didn't have a phone so bought one and used WST (Wizard Service Tool) to un-hide ext rom and copy it via ActiveSync
chears

[Help] please some can convert stok rom into nbh for me?

Hi I lost USB connection with my Blackstone and I can’t flash any ROMs or install HSPL so I can flash from SD card. I try the forum is there any way to hard SPL from SD card or is there any solution to fix USB connection problem? (which after searching the forum I found out there isn’t) so only solution remains send it to repair. But I have a cooked ROM with stock SPL installed; please someone can convert my stock ROM into nbh format so I can flash it from the SD card or teach me how to from stock exe file into nbh remember I can’t dump the rom.
Please help thank a lot.
You can extract the ruu_signed.nbh out of the shipped exe.
You don't need to dump any rom!
Just open the stok/shipped rom with winrar: click with right button on shipped rom and choose open with winrar.
When winrar is open you just estract the ruu_signed.nbh file where you want and rename it into BLACIMG.nhb, put into your sd card and flash!
PS. sd card is must formated into Fat32 to perform flash!
Thanks to your quick response i will try it right away. thanks again
I let you guys know what happen
Thanks a million for your help yes I able to install stock rom back from a SD card know i can send it for repair.
Thank you very much I really appreciate you help
Great, I'm happy that you've success!
dont forget
adeel2cool said:
Thanks a million for your help yes I able to install stock rom back from a SD card know i can send it for repair.
Thank you very much I really appreciate you help
Click to expand...
Click to collapse
don't forget to do the stock spl after flashing the stock rom..........
So how can I return the nbh file to the RUU exe file?
pvloc90 said:
So how can I return the nbh file to the RUU exe file?
Click to expand...
Click to collapse
Just make sure the nbh file is in the same folder as the RUU exe and it will pick it up when you run the RUU.

CAN'T FIND RUU_Signed.nbh FILE IN THE STOCK ROM

I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
bgeorgi said:
I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Click to expand...
Click to collapse
You need to extract the RUU_signed bit from the image i am having the same issue and i write software for a living. Are you following the tutorial on how to back up your rom?
video guides
Im actually following BioVolt's video guides which I think u can find on this site if u search biovolt's video tutorials? they're really good and detailed but they're kinda long.
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Stalix said:
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Click to expand...
Click to collapse
it's not for flashing it is for doing a ROM dump in all the tutorials it does'nt tell you what clearly to do with the stock ROM once downloaded. But now i know along the same lines as your idea It just needs renaming to RUU_Signed.nbh then place this in the same folder as the 4 files you have allready extracted.
I have watched biovaults vids good but a little long for me.
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
blondyz said:
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
Click to expand...
Click to collapse
The reason we use uk roms is cos they they are WWE(world wide english) and the kitchen needs this to dump the rom.
the one you end up with will be an exact copy of your stock rom.
Yes just rename the uk one
Allright, thanks alot! Really helped me out.
Intratech said:
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
Click to expand...
Click to collapse
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Ersill said:
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Click to expand...
Click to collapse
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
blondyz said:
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
Click to expand...
Click to collapse
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Ersill said:
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Click to expand...
Click to collapse
Might be, but you still should find the file if you successfully transefered it to the storage card...
Just to be sure, you haven't reformatted your storage card recently? It has to be in the "FAT_32" format to be flashable..
Can't really think of much else that gives you these problems..
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
bgeorgi said:
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
Click to expand...
Click to collapse
It must be uk ROM due to it being the only one that is guarenteed WWE the kicthen won't recognise anything else and when you flash back it will be whatever stock rom you currently have.

Categories

Resources