Related
Hi,
Thanks to the very clever people over at www.imei-check.co.uk I now have an unlocked T-Mobile Vario.
http://www.imei-check.co.uk/m3000unlock.php
I now wish to know if I can flash my unlocked Wizard with an Imate K-Jam2 flash?
I know there is another post on flashing the the Qtek 9100 with the K-Jam but I dont know if the T-Mobile Vario will pose any different issues or problems.
What I want to know is :-
1) Can it be done, can I flash my T-Mobile Vario with a K-Jam2 ROM?
2) How do I make a backup of my T-Mobile ROM before taking the plunge?
I am a Sony Ericsson P900 convert so please be gentle with me on your responses. I'm no expert but have got this far (Unlocked) by reading these and other forums.
If any of you can help out I would be most gratefull.
Cheers
Lee
I have (had) a Vario from T-Mobile Netherlands. I unlocked like you and ran the ROM upgrade utility for Qtek 9100, available for download on :-
http://www.beyondthetech.com/blogs/kjam/
It works fine. My Dutch phone now talks to me in English.... phew!
@belgilux
What are the advanges of the qtek rom over the vario ??
Niets dat ik kan bespeuren. Enkel is ding dat zijn in WWE - wereld Wijde Engels - dit is good voor mij aangezien mijn Nederlands niet zo goed is. ..
ok thanks ,
mijn nederlands is goed , dus hou hem liever in nederlands
grtx, arnold
Hey, guys, I have the same problem - I want to change the OS from a german to en english one. My device is the XDA Mini S from O2 Germany. Do I *really* need to pay for unlocking first or I can just flash it?
P.S. How did you back up the ROM before the flashing?
hello ingenious ,
as far as i know , you have to unlock it first otherwise you can't acces the bootloader.
buckup of your old rom can be done (only after unlocking).
you need the program romupdate.exe
disable activesync on usb connection
turn off phone
connect usb cable while pressing camera button
start romupdate
chooice usb connection
enter 'r2sd all' this coppies your phone rom to your sd card (sd card will be erased !!!!!)
next step is to dump the sd card to file to store.
you need ntrw.exe and sd card reader
in a dos box in a dir with ntrw enter 'ntrw read dump.nb1 drive_letter_of_reader:'
that will dump you entire sd card to file.
to restore , but it back with ntrw write .......
reset phone while holding voice an camera button and chooise restore from sd card.
good luck , arnold
p.s. i'm wrinting this out of my memory so forgive me if i have something wrong.
Hey, thanks very much
Just a thing bothers me still... If I unlock the phone (i.e. replace the boot loader) won't I just lose my warranty from O2?
mhh that doesn't worry me to much,
officiali it will only void your warrnaty if they can proof that that is the problem.
if not they can not hold it against you (in holland that is) , but you may have to 'fight' for your warranty.
grtx , arnold
run the ROM upgrade utility for Qtek 9100
hi guys,
i wanna ask a questions about run the ROM upgrade from utility for Qtek 9100.
my pda-phone is mda vario, is it possible if i did it without unlock my phone?
because i tried run the ROM upgrade utility for Qtek 9100, but it said that there is an error with my phone while in process. but in that case, i haven't unlocked my phone.
anyone can help me, please
thank u...
reset phone while holding voice an comm.manger button and chooise restore from sd card.
Click to expand...
Click to collapse
but he boot NOT from the sd card ... where is the trick ?
regards
I have successfully replaced the ROM on my MDA Vario with a K-Jam ROM and now I want to go back to the original ROM. Following the instructions by arnoldl earlier in this thread I created a backup dump.nb1 file and used ntrw_189.exe in a CMD window to dump this to a file. This took bloomin' ages since I have a 1GB card - very tiresome!
Anyway, I have now reversed that process to copy the dump file back to the mini-SD card but when I hard reset my Vario I do not get a prompt to restore from the SD card. I only have options to restore to original settings or cancel.
I have allowed a hard reset to complete and the mini-SD card does not even register in the Vario. Removing and reinserting does nothing. I've tried a hard reset twice and still no joy.
Assuming I have successfully created a working ROM image on my mini-SD card are there any other tips or options for restoring it to the Vario ROM?
anyone knows the keys to press for restore an image from sd card ?
I have tried all combinatiosn of keys, but nothing are working
regards
sorry , it is hold camera and voice comm button while resetting.
previes state must be on!!
grtx arnold
Thanks for that. I just realised it says hold camera and voice comm rather than comms and voice comm, like you would normally do for a hard reset.
I've tried a boot with the correct buttons and could see nothing at all on the screen. I now realise there is something but without a backlight it is nigh on impossible to see. Anyway, I spotted that too late and started button mashing to try to get the thing to spring into life. It is now staring at me with a big clear white (lit) screen that dims briefly periodically. I now have no idea what is going on and whether this is the correct behaviour or not.
How long should the reflash take? Will having a 1GB card mean it takes 8 times as long as a 128MB card as it has to read the whole thing? How do I know if this is working OK?There are no progress bars or anything - just a plain white screen.
i did say comm and voice , but i just changed that
reflash was prety fast when i did it , within a minute i thought (256mb)
Oh dear :-( Mine's been blinking at me for 15 minutes now.
I just restarted the process and I managed to see a "Format BinFS Success" message and a progress bar at the bottom which I think said "Upload OS" or something like that - too difficult to read properly in today's miserable grey daylight. But I'm now staring at the plain white screen once more.
Maybe my ROM image is fried. Any ideas how to get hold of a clean T-Mobile UK MDA Vario ROM file?
EDIT : Further info......
Bored of the blank white screen I pressed the reset button on its own. The device reset and this time with the benefit of the backlight being on I could see the Format BinFS success message, a couple of checksum checks and something about downloading ROM and extended ROM. This all took only a minute or two, which seems positive. But then I saw a message about formatting FAT (or FAT32?) and while that was being displayed the screen faded/disolved to plain white and has resumed its periodic dimming.
Unfortunately I now have HTC Innovation and imate branding all over the thing so I can't just pop it back to T-Mobile to fix it. I wish they had a full ROM upgrade/replace image in a .exe, like qtek and imate.
hello,
what means "previes state must be on!! "
i have an 512 mb card and no chance to boot the sd. Has anyone
try the qtek german bin on the xda ftp server here ? i write this
image via ntrw on my 512 mb card, press the camera and voice button and also reset, but the sd card want recognize ...
help! I want this german qtek rom on my wizard.
regards
greddy said:
hello,
what means "previes state must be on!! "
Click to expand...
Click to collapse
i only got in this mode when resetting with the buttons pressed when phone was on.
when i first shut it down and then reset it didn't work.
grtx
Having left the white screen for a couple of hours there is no sign of anything useful happening. I reset the device and now I am dumped directly to the bootloader screen - there seems to be no software on the device now.
So it appears I can only get this thing up and running again with the k-jam ROM (or presumably Qtek) by running the .exe ROM upgrade file. But for me my option to go back to native Vario software seems to have vanished forever. Maybe I'm just really unlucky but this might serve as a warning/caution for others who want to flash their Vario.
I just flashed my Qtek 9100 with the T-mobile rom "RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe" from the ftp. I have tested a lot of different roms without trouble. But after the flash my Qtek is stuck at the bootscreen just displaying
IPL 1.06
SPL 1.06
GSM 01.12.10
Tried a hardreset and it says format complete but after a reboot I am stuck at the bootscreen again. I am terrified - can I make my beloved qtek to work again or is it just a piece of expensive junk now ?
Sorry, stupid me I was as easy as start in USB mode and reflash and it booted normally again
easycure1974 said:
I just flashed my Qtek 9100 with the T-mobile rom "RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe" from the ftp. I have tested a lot of different roms without trouble. But after the flash my Qtek is stuck at the bootscreen just displaying
IPL 1.06
SPL 1.06
GSM 01.12.10
Tried a hardreset and it says format complete but after a reboot I am stuck at the bootscreen again. I am terrified - can I make my beloved qtek to work again or is it just a piece of expensive junk now ?
Click to expand...
Click to collapse
I am in the same situation now..
I am trying to re-flash the original ROM now, enter the booloader menu by holding voice-dial+CAMERA while resetting. then connect USB an try to re-flash.. It works for 30 minutes now without luck, I don't know what to do either... HELP!!
and a hint to those that are NEW: if you want to screw up your device, play with ROM upgrades... you will end up like us..
easycure1974 said:
Sorry, stupid me I was as easy as start in USB mode and reflash and it booted normally again
Click to expand...
Click to collapse
PLEASE help me, what utility did you use to reflash?
Just press the camerabutton and reset and then you will come to the USB mode and then just used the flash utility file again and start the flash again and then it shall work.
I used the RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe form the ftp once again and it worked
easycure1974 said:
Just press the camerabutton and reset and then you will come to the USB mode and then just used the flash utility file again and start the flash again and then it shall work.
I used the RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe form the ftp once again and it worked
Click to expand...
Click to collapse
doesn't work form me because I didn't unlock before it crashed.. now I can't re-flash it..
ok, but then use the right official flash for your device - if it is a qtek use a qtek flash or imate if it is an imate device. The most flash files is available on the ftp.
easycure1974 said:
ok, but then use the right official flash for your device - if it is a qtek use a qtek flash or imate if it is an imate device. The most flash files is available on the ftp.
Click to expand...
Click to collapse
10x easycure, you are an easy cure for my troubles I am downloading it and I am sure it will work this time ( have a QTEK 9100)
Another question: did RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe upgrade your radio ROM as well? what machine do you own? I think of flashing it eventually as well..
I hope it will work for you!
Yes the t-mobile upgraded everything - but it has a lot of crap in the extended rom that I don´t like and with the new rom versions it doesn´t seem possible to delete anything from the extended rom.
So I will flash it again when a newer flash from qtek is available. Tried the Qtek_9100_1_6_7_ENG.zip rom but it is just OS - I dont like the idea of using OS from Qtek and the rest of the software from some other brand.
I have a swedish Qtek 9100
easycure,
I don't like the crap either but I found someone's suggestion to soft reset the device just before installing software from extended ROM (just after aligning screen). I just had to install some CAB's manually to get MMS support etc.
Hope this helps you also
Priit said:
easycure,
I don't like the crap either but I found someone's suggestion to soft reset the device just before installing software from extended ROM (just after aligning screen). I just had to install some CAB's manually to get MMS support etc.
Hope this helps you also
Click to expand...
Click to collapse
I tried that but I didn´t got the mms to work with that but then I shall make another try with that!
I installed Shortcut-MMS1-JAVA6XX-CV-VOICE-EmailWiz-TMO-03Nov05.CAB to get MMS support. I also installed coouple of CABs that had "Camera" in the name hoping it will improve camera functionality or something
I've been trying to get my old extended rom and new Qtek OS on my Wizard (Vario).
But now it gets stuck in the spash screen (ie the one giving the ROM numbers).
I've tried putting the wizard into bootloader mode and I can flash RUU's but when it resets it still gets stuck on the spash screen and won't go any further !!!????
What can I do ??
Please Help
Cheers
John
I should say that I had flashed using button's ROM RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
and this worked fine!
I then copied across my T-mobile Extended ROM and again everything seemed OK.
BUT then I tried to restore my new saved OS ROM using aWizard and this caused a freeze on my Wizard. It was after a hard reset that the wizard stopped at the splash screen.
Now of course I'm limited in my options because Activesync won't work until the Wizard has fully booted up.
I have tried setting the Wizard into bootloader mode and tried several ROM's (RUU Installer ones) but every time the correct splash screen comes up with the new ROM numbers but that is as far as it gets.
I also noticed on hard reset that you get the following message
Format FAT partition
Format failed
it then goes to the splash screen as before.
Are there any other things I can try Or will I have to send it back to T-mobile for a replacement??
(It's only 2 months old and I have re-flashed it with the orginal T-mobile ROM - but still won't go past the splash screen!!)
I live in hope
John
I have this EXACT same problem!
I can reflash any ROM but it will not go past the splash screen. Only difference was I wasn't playing with my extended ROM. I flashed the AKU2 QTEK ROM yesterday and have been fine through several soft resets, etc. This last time I was uninstalling phonealarm and after a soft reset I got a "could not find smswakeup.exe" (or something similar) and it's been stuck ever since! I also get the "Format Failed" message. Can anyone help!?
I think I'm going to have to send it back to T-mobile and hope they give me a replacement. Something is wrong, it doesn't seem to make any difference what ROM I used.
I think I'll reload the T-mobile shipped ROM grom the FTP site and send it back - and claim ignorance that it it suddenlt freezed and now won't boot up! - Bummer!!!
Right I've logged a fault and it will be sent back - let's hope T-mobile can't detect it's been unlocked and had several ROM updates - I suspect they will try a ROM update themselves then give up ???
The worrying thing though is that it IS possible to kill your phone with updates - maybe it was when I used aWizard to try and restore a ROM that did it??? I'll be more carefull next time!!
this has just happened to one of the devices im flashing at the moment.... absolulty f**king raging :evil: :evil:
i wish teher was a solution!!? anyone got any ideas?
activesync wont find it, so aWizard wont work.
i can flash between 3 roms without any problems (1.5.x 1.6.x 2.x) but always hangs on the splash screen. i have flashed back to the default rom that it came installed with it so i could just send it back to o2 (only 2 days old!)
i would rather just get it sorted by myself thoough so if anyone has ANY ideas then please let me know.
thank you!
Good luck! after about 3 days of trying different types of firmware, I gave up and sent it to expansys, for repair. And it looks like they've lost the bloody thing now. :evil:
tonym001 said:
Good luck! after about 3 days of trying different types of firmware, I gave up and sent it to expansys, for repair. And it looks like they've lost the bloody thing now. :evil:
Click to expand...
Click to collapse
yup looks like i might have to give up... ohwell, no worries i will just return it back to O2...
looks like one of our sales guys wont be getting a new phone on tuesday :lol:
same problem here.
tryed to write os with awizzard after changing extended_rom.
kills phone.
format failed..
Tryed different os's from win util - failed
upgraded with sd card methode worked.
in short :
you need a working wizzard to make a os dump on sd card.
Connect to wizzard with usbterm or romupdate.exe or simular.
do a rs2all command to dump os to sd card.
stick this card in broken phone.
hold voice comm button while resetting.
On ask press voice comm button again.
it bow restores the sd backup to phone.
saved mine.....
btw sd card backup can be read ad write by pc with util ntrw.exe .
so if you don't have a working dump i can upload one.
just mail me.
grtx , arnold
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
arnoldl said:
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
Click to expand...
Click to collapse
Don't worry, I met the same problem as you before, almost lost my hope, but finally I managed to fix it.
The solution is simple, that is to find an original SD card backup image from your wizard or others, then try to restore it in the bootloader mode. In my case, it said checksum error or sth else after begin restoring, and it gave up. Then I put my wizard into bootloader mode, picked one offical released RUU package, start reflash again. Finnally, I found the wirzrd works again for me after reboot.
I guess the principle is that the SD restore will destroy some import flash data structure before it said wrong, then the RUU package will rebuilt it wholely in the next reflash.
Hope this helpful, and sorry for my bad english.
There is hope
Last week after trying to downgrade to the original Cingular ROM on my 8125 using aWizard I ended up with a device that was close to being a paperweight. At least I thought so until I read and read and finally was able to get it to the bootloader and then plugged in the USB cable and ran the RUU for the new Qtek ROM (2.17). Guess what happened, yeah it worked. To my surprise I had a perfect device after 15 minutes.
For about 3 hours I thought I was a toast. Never will I do that again.
THIS is truly heaven for me !!
I have my O2 XDA MINI S locked on the splash screen .. and i updated some ROMS to it ....BUT IT DOESNT GET THROUGH IT .... please tell me what to do in a little detailed manner .. please so that i can get my phone to work.. there is no warranty on the phone and i stay IN INDIA . SO YOU'LL ARE MY ONLY HOPE .
my email id is - [email protected]
If you have a dump of the O2 XDA MINI S ..please mail it to me
Plese tell me what to do next ? WILL TRULY APPRECIATE HELP
PLEASE SOME ONE ATLEAST MAIL ME the dump of the os SO THAT I CAN TRY THE SD CARD UPGRADING ,.,,, O2 XDA MINI S
Re: There is hope
Dear Friend
I have problem that my xda mini s stuck on O2 screen, could you help me step by step.
Thank you so much
my mail : [email protected]
Thanks friend
hellomoto_25 said:
Last week after trying to downgrade to the original Cingular ROM on my 8125 using aWizard I ended up with a device that was close to being a paperweight. At least I thought so until I read and read and finally was able to get it to the bootloader and then plugged in the USB cable and ran the RUU for the new Qtek ROM (2.17). Guess what happened, yeah it worked. To my surprise I had a perfect device after 15 minutes.
For about 3 hours I thought I was a toast. Never will I do that again.
Click to expand...
Click to collapse
Dear Friend
I have problem that my xda mini s stuck on O2 screen, could you help me step by step.
Thank you so much
my mail : [email protected]
Thanks friend
odyseus said:
I've been trying to get my old extended rom and new Qtek OS on my Wizard (Vario).
But now it gets stuck in the spash screen (ie the one giving the ROM numbers).
I've tried putting the wizard into bootloader mode and I can flash RUU's but when it resets it still gets stuck on the spash screen and won't go any further !!!????
What can I do ??
Please Help
Cheers
John
Click to expand...
Click to collapse
stuck on o2 screen helppp
Dear Friend
I have problem that my xda mini s stuck on O2 screen, could you help me step by step.I see alot of post, so complicated
Thank you so much
my mail : [email protected]
Thanks friend
flexchen said:
arnoldl said:
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
Click to expand...
Click to collapse
Don't worry, I met the same problem as you before, almost lost my hope, but finally I managed to fix it.
The solution is simple, that is to find an original SD card backup image from your wizard or others, then try to restore it in the bootloader mode. In my case, it said checksum error or sth else after begin restoring, and it gave up. Then I put my wizard into bootloader mode, picked one offical released RUU package, start reflash again. Finnally, I found the wirzrd works again for me after reboot.
I guess the principle is that the SD restore will destroy some import flash data structure before it said wrong, then the RUU package will rebuilt it wholely in the next reflash.
Hope this helpful, and sorry for my bad english.
Click to expand...
Click to collapse
how to use bootloader
could you tell me how to use mentioned bootloader for restoring the images? where can I get the software?
Please help
Hendrick
flexchen said:
arnoldl said:
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
Click to expand...
Click to collapse
Don't worry, I met the same problem as you before, almost lost my hope, but finally I managed to fix it.
The solution is simple, that is to find an original SD card backup image from your wizard or others, then try to restore it in the bootloader mode. In my case, it said checksum error or sth else after begin restoring, and it gave up. Then I put my wizard into bootloader mode, picked one offical released RUU package, start reflash again. Finnally, I found the wirzrd works again for me after reboot.
I guess the principle is that the SD restore will destroy some import flash data structure before it said wrong, then the RUU package will rebuilt it wholely in the next reflash.
Hope this helpful, and sorry for my bad english.
Click to expand...
Click to collapse
Hi Arnold
My O2 cda mini s get stuck at splash scree, I read your post, still not so understand how to solve it, could you be so kind to write me step by step, and send me some software to solve it. Your help will be so much appreciated.
Hendrick
Email: [email protected]
arnoldl said:
same problem here.
tryed to write os with awizzard after changing extended_rom.
kills phone.
format failed..
Tryed different os's from win util - failed
upgraded with sd card methode worked.
in short :
you need a working wizzard to make a os dump on sd card.
Connect to wizzard with usbterm or romupdate.exe or simular.
do a rs2all command to dump os to sd card.
stick this card in broken phone.
hold voice comm button while resetting.
On ask press voice comm button again.
it bow restores the sd backup to phone.
saved mine.....
btw sd card backup can be read ad write by pc with util ntrw.exe .
so if you don't have a working dump i can upload one.
just mail me.
grtx , arnold
Click to expand...
Click to collapse
Hi friends,
I am very new to upgrading\downgrading pc phones. I was trying to upgrade my wizard to upload diffirent language ROM, using this method :-
http://forum.xda-developers.com/viewtopic.php?t=56088
After some tries, I succeeded to upgrade rom, but after this power on the wizard and it stuck into startup screen.
If I press Camera + Power swich it shows three colour screen and some text :
IPL 2.16. 0001
SPL 2.16 0001
I think my device was CID locked and G4, and that is why I have a dead wizard.
I have backed up the phone before upgrading with wizBackup.exe and I have back files on my hard disk. I dont know how to restore rom from these backup files. :?: :?: :?:
Please help me to revive my PC.
Thanks in advance
Singh06 said:
Hi friends,
I am very new to upgrading\downgrading pc phones. I was trying to upgrade my wizard to upload diffirent language ROM, using this method :-
http://forum.xda-developers.com/viewtopic.php?t=56088
After some tries, I succeeded to upgrade rom, but after this power on the wizard and it stuck into startup screen.
If I press Camera + Power swich it shows three colour screen and some text :
IPL 2.16. 0001
SPL 2.16 0001
I think my device was CID locked and G4, and that is why I have a dead wizard.
I have backed up the phone before upgrading with wizBackup.exe and I have back files on my hard disk. I dont know how to restore rom from these backup files. :?: :?: :?:
Please help me to revive my PC.
Thanks in advance
Click to expand...
Click to collapse
Your phone is not dead!!!
If you can get to the three color sceen then your botloader is intact (and preserving the bootloader was the point with the tutorial that you followed).
Your phone is CID locked and is G4, that's right, but this is NOT the reason for the problem. The tutorial you followed, which incidentally I wrote, deals with CID locked G4 phone like yours.
The problem you had is probably due to a not correctly cooked rom.
Anyway, don't worry. You got the three colors screen so you can connect your phone to USB (even if activesync won't recognise it) and flash your factory rom (the one you were trying to replace). Don't need to use your backup: simply download the original rom from the manufacturer/operator site.
bye
After many tries now my phone is working again,
I downloaded RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship from internet then cooked its nk.nbf file.
then uploaded the rom and phone is working again. Thanks for your help
Singh06 said:
After many tries now my phone is working again,
I downloaded RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship from internet then cooked its nk.nbf file.
then uploaded the rom and phone is working again. Thanks for your help
Click to expand...
Click to collapse
I glad you worked it out!
Bye
hello. I have similar problem. I upgraded my wizard to AKU2.3 and now phone doesn't start. It start showing splash screen with the information:
IPL:2.24
SPL:2.24
GSM:02.25.11
OS:2.24.10.1
HOW to fix this problem ?
hi guys
i have qtek wiza200 today i'm use MrClean_RUU_WIZARD_224a_AKU23_WWE.zip after flashing my phone turn on and installing all soft and restart and dead my phone. i'm push camera+power+reset i can't enter to boot mode. help me to repair my cellphone and how resolve my problem. my phone forever dead????
thanks a lot
About a year ago I flashed my fresh p4350 with (if I well remember) Aserg's rom. I was quite a noob and I don't remember if there was any warning about the IPL<4 warning. So I got a brick ever since.
I just turns on and gets stuck on the white HTC logo, the boot with the camera button pressed works and appears "USB" on the bottom while line.
I looked for some fixes on this forum but I didn't see anything helpful.
Do you now how/if I can unbrick it?
Somewhere to start
Send it to me Ill fix it and use it...nah, Im just kidding. Try looking up hard slp, or you can put your phone in bootloader mode and flash a stock rom. But with Hard slp ur flashing from the sd after...should help you. Another suggestion is to take the radio out of the rom your flashing. Look all of this up, it may help you.
Your problem could be solved: You have to 1st) do a hard reset
then flash with original flashfile, and its done
I don't remember what I did last time I tried but it worked perfectly, I just opened the original updater
HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe
when the phone was in the bootloader and it worked.
Well, now I need to change the language
I tried to HardSPL it now but it says that the image is corrupted, so I'm going to download it again and try again.
Thanks a lot!
.... unless anyone wants a P4350 in Spanish, pretty much new, unfortunately never used...
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
bayxsonic said:
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
Click to expand...
Click to collapse
Help........
I have the same problem, but I Danich......help me