MS VOICE ENABLER/MS VOICE COMMANDER OVER BT - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if this helps

I have not tried it but it sounds like it makes the change to the reg for you and back again, it does not solve the open audio gateway issue.
Would be good for someone that has not done the reg hack yet.

Related

voicecmd.exe not found

Hi
Just flashed my rom with bal666's splash editor, which is so easy to use.
Then restored my data using xBackup for the 1st time when it came to softreset i got an error saying
'Cannot find 'VoiceCmd' (or one of its components)'
Does this file belong to Microsofts Voice program or something else and whats the best way of fixing the error now and to stop it happening again on the next restore.
Thanks
fixed problem.
it was microsoft voice but i don't know why it happened
thanks
voicecmd.exe issue on htc touch diamond
I dont know how i managed to do it, but even after upgrading to latest official ROM, i deleted something and then I started getting "voicecmd.exe" errors every time the phone started up. My fix was to install Microsoft Voice Commander. This worked but i found that I was using memory for a program I dont use, or didnt seem to work out of the box.
It might be a great thing, but i havent lost any time trying to learn how to use it, and even without it, voice speed dial works normally/perfectly and allows to start not only a call to a contact (you still need to record the voice tags) but also to start applications.
If anyone out there has decided to remove microsoft voice command, like i did, then you should use a tool like sktools to find invalid registry keys and you will find the key by searching on sktools registry tool, for "voicecmd".
I should have taken note of the path but i can tell at least that the word "startup" is in it.
Anyway, removed key, phone starts faster and hey, nothing like 50% used memory!
Screw TF3D and thumbs up for handy weather!
Btw, love my HTC Touch Diamond...
how did you fix it guys ?

Bluetooth and Microsoft Voice Command

I know this has been beat to death in the Hermes forum but I have found a bit of difference with my Kaiser as compared to my Hermes.
I have quite a bit of experience with the TyTN hermes tweaks to get Microsoft Voice Command to work with the Hermes but not only will the Kaiser NOT work without the tweaks - I can't get it to work with the tweaks.
I followed the exact instructions like I always have listed in the Hermes Wiki section titled Utilities and Software Tweaks (including Bluetooth Voice Command installation and the Registry changes). However after the changes I cannot initiate a Bluetooth instruction via the Bluetooth device. If I initiate the call via the handheld it works great as far as stability and sound quality.
Any suggestions?
You don't have to do any tweaks on Kaiser! Just install VC 1.6. Assign Button 6 to Voice command. Soft reset. It should work. Works for me at least. The only think that doesn't work is a caller name announcement.
ID64 said:
You don't have to do any tweaks on Kaiser! Just install VC 1.6. Assign Button 6 to Voice command. Soft reset. It should work. Works for me at least. The only think that doesn't work is a caller name announcement.
Click to expand...
Click to collapse
Ditto,
My Kaiser does announce incoming callers on the internal speaker when the setting is on "use bluetooth if available". I only use bluetooth with my car so I do not know what the behavior with a headset would be.
Does it work so that you can push the button on your Bluetooth headset or Bluetooth car adapter and then give the Voice Command through the headset? Mine didn't work. That's why I did the tweaks.
Also can someone tell me that with just the Voice Command installed what does the following registry key have (or does it even exist)?:
HKLM\SOFTWARE\OEM\VoiceCommand\Path = ????
AND
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTAGExtModule = ???
Also if you go to settings and click on Voice Command - what version Voice Command do you have? I have v1.6.4622.0
Thanks
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
ID64 said:
Can you please check build number of your VC 1.6?
Click to expand...
Click to collapse
Not terribly related, but v1.60.4622.0 is what my copy reports as well - though I'm still on a Hermes. I believe that's the retail release, I've not seen any indication of another one....
Richard
ID64 said:
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
Click to expand...
Click to collapse
I have the same version number. Is there a different place to actually check the "build" ?
jcrompton said:
I have the same version number. Is there a different place to actually check the "build" ?
Click to expand...
Click to collapse
If you go to VC settings, please go to about or something like that. There you will see full version number.
Thanks
yep
its the 1.6.4622.0 version
jcrompton said:
yep
its the 1.6.4622.0 version
Click to expand...
Click to collapse
Thanks Just to confirm: you can hear callers name over your BT car handsfree?
ID64 said:
Thanks Just to confirm: you can hear callers name over your BT car handsfree?
Click to expand...
Click to collapse
Hmm... Looks like I have build 1.60.4630.0
Hi, I have build v1.60.4622.0 and I noticed a fundamental difference when installing to my kaiser than when installing to my Uni; no registry entries get added to:
HKLM\Software\OEM\VoiceCommand
So this means that no bluetooth interaction would work. Therefore I added:
Dword entry: LaunchAPEnable (value 0)
and
String entry: Path (value \Program Files\Voice Command\voicecmd.exe
Rebooted and now voice command is initiated fine via bluetooth headset. Haven't tested notifications yet - I think there might still be a missing reg entry but I can't remember what it is!
Hope this helps someone....
Thanks. I'll try those registry changes. I hard reset last night to make sure that I got rid of all of the "tweaks" that had been done - the way I did for the Hermes.
I wonder where the other guy got version 30 instead of our version 22
I got mine from Handango - the Microsoft site doesn't have any updates except for version 1.5
ID64 said:
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
Click to expand...
Click to collapse
No problem. v1.6.4622.0
I should have caught up on the thread first. Just to be claer, I do not hear the callers name through my car. I do hear it only on the Kaiser's speaker.
I'd love to get the announcements working over BT. It was sporadic on my TyTN with the registry hacks.
captainsensible2002 said:
Hi, I have build v1.60.4622.0 and I noticed a fundamental difference when installing to my kaiser than when installing to my Uni; no registry entries get added to:
HKLM\Software\OEM\VoiceCommand
So this means that no bluetooth interaction would work. Therefore I added:
Dword entry: LaunchAPEnable (value 0)
and
String entry: Path (value \Program Files\Voice Command\voicecmd.exe
Rebooted and now voice command is initiated fine via bluetooth headset. Haven't tested notifications yet - I think there might still be a missing reg entry but I can't remember what it is!
Hope this helps someone....
Click to expand...
Click to collapse
THANKS!
This needs to go into the Kaiser WIKI !!!
These registry changes are needed inorder to be able to initiate phone calls from your bluetooth device using Microsoft Voice Command. These registry changes worked GREAT and the initiation of calls from bluetooth work much better than with the Hermes and it's tweaks.
Of note, using Resco Registry editor, I had to put quotes aroung the Path entry to get it to work so my registry edit looked like this:
Path Value= "\Program Files\Voice Command\voicecmd.exe"
If anyone knows how to get attention to have this put in the Wiki please feel free.
Odd, I did not have to edit/add any registry settings and I can initiate calls/commands from my BlueAnt Z9 headset.
________________________
HTC TyTN II (Kaiser) / WM6
greg3d said:
Odd, I did not have to edit/add any registry settings and I can initiate calls/commands from my BlueAnt Z9 headset.
________________________
HTC TyTN II (Kaiser) / WM6
Click to expand...
Click to collapse
? using Microsoft Voice Command ??
I used several different headsets / devices and no luck until I made the registry additions. What ver of Voice Command do you have?
Can someone turn this into a CAB?
Thanks
jcrompton said:
THANKS!
This needs to go into the Kaiser WIKI !!!
These registry changes are needed inorder to be able to initiate phone calls from your bluetooth device using Microsoft Voice Command. These registry changes worked GREAT and the initiation of calls from bluetooth work much better than with the Hermes and it's tweaks.
Of note, using Resco Registry editor, I had to put quotes aroung the Path entry to get it to work so my registry edit looked like this:
Path Value= "\Program Files\Voice Command\voicecmd.exe"
If anyone knows how to get attention to have this put in the Wiki please feel free.
Click to expand...
Click to collapse
jcrompton said:
If anyone knows how to get attention to have this put in the Wiki please feel free.
Click to expand...
Click to collapse
Ummm, the whole POINT of a Wiki is that users can add to it themselves, so feel free to update the Kaiser section.....
Richard
GenesysLV said:
Ditto,
My Kaiser does announce incoming callers on the internal speaker when the setting is on "use bluetooth if available". I only use bluetooth with my car so I do not know what the behavior with a headset would be.
Click to expand...
Click to collapse
I have tried this option but does not seem to announce calls.
Hope someone can find a fix.
Thanks

Bluetooth Volume?

My bluetooth volume is really low on the headset, anyone else have this problem? Im using the Jawbone bluetooth headset on Dutty's v3 rom on my att tilt. Ive tried different roms, adjusting the volume to highest on the phone and the headset but callers are still hard to hear. Ive used the same bluetooth headset on my previous 8525 with no problems. My headset was even too loud when on high with the 8525. Any advice would be great because i do all my talking via bluetooth with my phone.
Yes, everyone has this problem - although I heard something about AT&T's latest ROM having some fix for the BT, but wasn't sure exactly what it fixed...
FIX?
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.
deeznuts said:
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.
Click to expand...
Click to collapse
Yeah as a matter of fact you can take this into your own hands. The latest AT&T ROM has a file called "AudioPara4-CWS_V6.csv" which I cooked into my new ROM (releasing tomorrow morning) as well. The thing is you don't need to "COOK" it at all. And it is simply a comma delimited spreadsheet. I have attached it so you can download it. Simply edit it as necessary for your headset, drop it in \Windows and add the following registry key to your device:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"AcousticFile"="\Windows\AudioPara4-CWS_V6.csv"
Drop and Go?
So i just drop the unzip file u provided into my documents and edit the registry myself as u described? Sounds easy enough if thats all it takes. Whats the name of the rom u are releasing? Ill have to give it a try.
?
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.
deeznuts said:
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.
Click to expand...
Click to collapse
If you're using File Explorer select "Show All Files"...sorry I zipped it directly from my ROM and it has the hidden and system attributes set. Even on a Windows machine you will need to enable hidden files AND Protected OS files to be able to see it. And put it in \Windows.
Nope
Even after i check show all files on file explorer, then click on the zip file, get the same zip error when i try to open it.
EDIT> See next post.
alltheway said:
Any chance of making this a .cab?
Im having trouble trying to follow your instructions. Every time I unzip it, I can't seem to find it. Am I missing something?
Click to expand...
Click to collapse
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?
deeznuts said:
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?
Click to expand...
Click to collapse
Make sure you have hidden system files unchecked in Windows?
If you using Vista go to tools in any folder. Click on folder options.
go the view tab.
uncheck "hide protected operating system files"
XP should work the same way as well. This solved it for me.
Adding Registry Key
Hey I was just wondering if I did this right...or am I totally off?
alltheway said:
Hey I was just wondering if I did this right...or am I totally off?
Click to expand...
Click to collapse
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???
jackleung said:
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???
Click to expand...
Click to collapse
Thanks for the .cab
I was wondering if you could provide me with a screen show of what it should look like so I will know for future reference.
Thanks,
EDIT: Am I getting closer?
Whats this cab do?
Thanks for the cab file but whats it supposed to do? I installed the cab to the device then soft reset the phone. I then talked via bluetooth headset for 20 minutes after reset and the low volume was still there. Almost seemed the cab did nothing more then take up 16kb of memory on the phone. Didn't address the low volume problem in the bluetooth headset. It must be something with the phone because i know this headset gets very loud becuase ive used it on several devices and all being consistant except the tilt. Any other suggetions to fix this problem anyone?
you can try this:
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway
Tell me what yours say for the "SpkVolume" setting ??
also...
I got this tip from somewhere before ... see if this help you ... it's for the BT handset mic volume ... but within those keys ... there should be one for the speaker volume as well ( you have to search for YOUR device ... as everyone's is different ):
quote:
""
Navigate to
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device
Under this you would find several keys. Each key represents a device you are paired with. In my case I have only 2 keys since my PDA is paired only with 2 devices (my notebook, and my handsfree) Then navigate to the handsfree key, so mine reads like this.
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device\000c55401c45\Services\0000111e-0000-1000-8000-00805f9b34fb
You would find a dword called name, verify that the value corresponds Hands Free
Change the channel to 5 (my default was 2) 5 seems to work better with Motorolla H500.""
goodluck
Bump for some more info.
If you search the forum you will find a few posts on this subject. I have been searching through them just about every day and I have had no luck in finding an answer. Seems editing the registry doesnt help and the BT fix cab was released by HTC to fix bluetooth headsets dropping calls. I have tried the fix and I have tried using Jetware, I have not tried the registry fixes because many others have tried and said it doesnt work. Ive been through 4 headsets and non have good volume. I am still waiting on someone to find a working solution or a reasonably priced headset (below $100 thats non-stereo) that works. I think you may be stuck for a while like so many others....
Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!
deeznuts said:
Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!
Click to expand...
Click to collapse
U don't have to limit what rom to use to have this so called BT volume fix (which I am not sure if it really working or not), just use the cab I package above.
For that battery status today plugin, you can find it here too: http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
edit: I just noticed you are using Dutty's 1.1 rom. U can try my rom here which based on his 1.1 rom but w/ a few enhancement: http://forum.xda-developers.com/showthread.php?t=357490

open touch 2.4 and bluetooth profile problem (resolved)

I installed open touch 2.4 and LOVE IT.. it makes windows mobile so much useful..
one thing i found problamatic was the bluetooth profile. The problem is when I press the call button on my bluetooth headset it doesn't trigger the voice speed dial. It just launches the dialler which shows the keypad.
That kind of defeats the purpose of 'hands free' if I need to press the voice speed dial on the phone and then use the headset.
Any solution ? Or any other package I can install to get the full functionality of voice speed dial with bluetooth.
I have the same problem, and it effects the ability for me to use MS Voice Command. I wish someone would help, but I made a post about this and got no replies.
beowolf said:
I have the same problem, and it effects the ability for me to use MS Voice Command. I wish someone would help, but I made a post about this and got no replies.
Click to expand...
Click to collapse
guys,
I'm working on v2.5 and will try to resolve this issue if possible.
I need more details as to what is happening.
Also,
I did not see any of this nature posted in the original v2.2 post.
Who else is having this issue?
hoolahoous said:
I installed open touch 2.4 and LOVE IT.. it makes windows mobile so much useful..
one thing i found problamatic was the bluetooth profile. The problem is when I press the call button on my bluetooth headset it doesn't trigger the voice speed dial. It just launches the dialler which shows the keypad.
That kind of defeats the purpose of 'hands free' if I need to press the voice speed dial on the phone and then use the headset.
Any solution ? Or any other package I can install to get the full functionality of voice speed dial with bluetooth.
Click to expand...
Click to collapse
Just to cover all basis, did you setup the button 5 options?
Remember that I left the 5th button free for people to choose either voice record or voice speed dial.
Going forward, please do not create new post, instead post your issues in the original thread.
Thanks,
I'm pretty sure that what your dealing with is a registry problem. When i switched to touchit 2.3 i had to reconfig to the following:
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Try it and let me know how it goes. I dont get credit for this it is from a previous post. This did work for me tho. I can prompt the voice speed dial from the bluetooth.
ttran001 said:
guys,
I'm working on v2.5 and will try to resolve this issue if possible.
I need more details as to what is happening.
Also,
I did not see any of this nature posted in the original v2.2 post.
Who else is having this issue?
Click to expand...
Click to collapse
Thanks ttran for responding. I have great respect for you for putting together this great ROM.
The issue is..
I am pairing my bluetooth headset (motorola h850) with the phone. After paring, if I press the call button on my bluetooth, it is supposed to invoke the voice dial app in the phone and call the voice tag I spoke. However it just brings the phone dialler screen and does nothing.
My diagnosis
For an incoming call (when paired), I can pickup the call using bluetooth headphone's button. So I know bluetooth instrument is working.
Secondly when I directly invoke voice speed dial from phone (i mapped a hardware button to voice speed dial) it works fine too.
Only problem is I can not invoke voice speed dial from bluetooth headset.
Do not confuse this issue with the hardware button mapping since I am trying to invoke voice speed dial from bluetooth headset (not from hardware button on phone. that works fine)
Please let me know if you need any futher information. I will happy to provide any additional details.
BTW thanks again for putting together such a great ROM.
Hi,
Thanks for clearing that up.
Please try what mrmikemcguire posted:
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
And let us know if it works for you, I don't use blue tooth so I can not test it for you.
Also,
Let me know if it fixes your issue so that I can add it to the next release.
Thanks folks,
sorry didn't work for me..
Ok.... First, thank you mrmikemiguire . Now hoolahoous .. did we make progress? The Audio gateway should be opening now... Verify that the registry modifications are correct in your device, then power cycle..... there may be another piece to the puzzle but those changes should work.
Edit: Final piece... Verify HKLM,"SOFTWARE\OEM\VoiceCommand "Path" = \Windows\SDDialer.exe
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
hoolahoous said:
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
Click to expand...
Click to collapse
Hi,
That reg fix has been added to v2.5 and yes Voice speed dial is included but not voice command since it takes about 4mb of space.
hoolahoous said:
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
Click to expand...
Click to collapse
Yep sorry about that.. I realized that when i did it, same occurance, but forgot to mention it! Sorry about that, but at least you got it squared away. Glad I could at least point you in the right direction.
mrmikemcguire said:
Yep sorry about that.. I realized that when i did it, same occurance, but forgot to mention it! Sorry about that, but at least you got it squared away. Glad I could at least point you in the right direction.
Click to expand...
Click to collapse
Either way thanks for providing feed back so to help resolve this issue.
I am using 2.5 slim and cannot get audio from realplayer, skype, etc.
I push the button and all I get is some wrong application, try again later errors....
Please help.
It all worked perfectly with the Clean ROM so may be someone with know-how can look at the registry differences between them and tell me if this is fixable, or i have to install the clean again...
Thank You!
#13 said:
I am using 2.5 slim and cannot get audio from realplayer, skype, etc.
I push the button and all I get is some wrong application, try again later errors....
Please help.
It all worked perfectly with the Clean ROM so may be someone with know-how can look at the registry differences between them and tell me if this is fixable, or i have to install the clean again...
Thank You!
Click to expand...
Click to collapse
Is this with bluetooth or the actual headset, or headphones?
And is anybody else having this issue?
Yes, BT.
Sorry i didn't mention this important detail.

Launch Cyberon Speed Dial via BT Headset, possibly due to a missing dll

I asked this question in the general dev and hacking forum but i think i should've asked it here, so here it goes:
I am using NATF v3 ROM which has MVC (MS Voice Command) built into it, and MVC works well for voice dialing if your contacts have English names, which I don't have. So, i went ahead and disabled MVC (can't uninstall as it is built into the ROM) and installed Cyberon Speed Dial which allows me to use my own voice tags to do the calling.
everything is ok, but the only problem is that i can't find away to start cyberon by pressing the BT headset button. all solutions i found on this and other forums were for the other way around (using MVC instead of cyberon)
thanks for reading and will really appreciate your help
still trying to get this worked out, and it seems that "OEMAGW.dll" is missing from my ppc, if somebody is kind enough to find it under his/her windows directory and post it, that will be great
OEMAGW.dll, anybody?
i would really appreciate anybody sending me the file
This is it
AthenaLod said:
i would really appreciate anybody sending me the file
Click to expand...
Click to collapse
This is the file..i´ve copied this from the windows folder in my xperia WM 6.1..hope it helps, plase let me know..

Categories

Resources