Take a look here:
https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm
BB Connect for MDA VArio direct download:
https://after-sales-service.t-mobile.de/eg_online/t-mobile/t-mobile_sw/mdavario_sw_bb_03-2006.zip
ActiveSync for BB:
https://after-sales-service.t-mobil...mobile_sw/mdavario_sw_bb_syncinst_03-2006.zip
PDF file:
https://after-sales-service.t-mobil...le/t-mobile_sw/mdavario_bda_sw_bb_03-2006.pdf
all in german.
i don´t have a MDA Vario, so i can´t try out.
I have the German MDA Vario but running QTEK 9100 Firmware on it .... seems it really needs the german rom to work/install properly. can anyone extract the cab file from the pocketpc client ? seems it cant launch the installer or setup program .... perhaps anyone has an idea on how to fix this ??
I too would really love info on this. We use a Blackberry Enterprise Server at work and I would be in heaven if I could use my HTC Wizard with it. Anyone??
-Keith
I don't want this fu**ing Berry Bull****, they should release a new AKU2 Rom!!!
The Vario BB client that you can download from T-Mobile Germany :
- Has a German installer
- but is English software
- Works on HTC Wizard and Universal devices, regardless of OEM (IMate, TMO, Qtek)
- But only on AKU1, not on AKU2
- and requires radio 1.12 (Wizard) or 1.06 (Universal)
- has T-Mobile settings coded into DLL files so cannot be used with other providers
(I have tested all variations)
I've installed this, I have VF account, it installs ok gets a PIN briefly gets IP address then disconnects, I have pushed the policies from our corporate BES Server, all downloaded ok, just need to check with our BES Manager to see if all setup on their end correctly, it WONT connect and stay connected, I can only assume this is a policy/encryption key issue.
What would be the best ROM for me to try this with VodaPhone BB Service...?
My actual Version is:
1.5.4.2 WWE
11/8/05
Radio 01.12.10
4.0.13.23
It connects quickly to the Blackberry Server but then disconnects.
I also am missing one of the Services (I have ALP,CHIME)
A colleague with a XDA 2 goy his working and he has 3 Services.
I have exactly the same question - which ROM would give us the #'s listed in the previous post?
The issue is the base ROM, I had to flash to a Tmobile Rom for the Tmobile Blackberry to work properly, I use Vodafone as the carrier but the corporate BES server as the Policy Push service. Vodafone will not let you set up a non VF device on their service hence having to use the Corporate BES server for email etc.. I dont need the VF service anyway
I tried the German Blackberry Connect software on both of my devices. One of them is a Qtek 9100 and the other is a Qtek 9090 (WM2003). I have a BES and a Blackberry 8700 for work.
I saw the same problem everyone else is seeing, in which the client will try to connect and then will disconnect and stay disconnected. I checked out the BES administrator and I confirmed that both clients have communicated with the BES because I was able to see each PIN associated with the Blackberry user in the admin tool.
I concur that the network settings for the client are hardcoded with Tmobile and probably will not work with any other carrier.
Anyone figure out a way to hack the client to set the network settings? Has anyone successfully registered their Blackberry Connect client using Cingular?
Related
Hello
My Company have provided me with a Blackberry 7100v so I can receive emails on the move. My only problem, I prefer My Blue Angel "XDA11s".
My Blue Angel is now Sim free, therefore I now have my Vodafone Sim in my Blue Angel.
I would like to know if I can activate the Blackberry Exterprise using my XDA.
Regards
I have just been setting this up today on my xda IIS. this should not be a problem my only one was that the vodafone sim was not activated for Blackberry once this was setup it was worked fine.
You already have been set up on the blackberry enterprise server so all you need to get is the Activsync blackberry configuration tool this is on the 02 myxda site and install this on your computer, connect your xda and click on the connect to issue it a key this should be pretty much you providing you have a gprs connection configured on your device.
Does anyone know if there's a working Blackberry Client on a BA under WM5.
I've just upgraded to ROM: 5.03.03,(03/02/05) and Radio: 1.13.00. / TuMa 1.3.
I'm seeking to an alternative to my Blackberry device and I was wondering if it was possible to keep the push email service on my Qtek 9090.
As the situation is similar to the one described by August263 I followed the approch provideded by Conzy, but wasn't lucky enough to get the software out of O2.
Anybody that has a working BB Client for BA under WM5?
Thanks
Indiana
With all of the concerns over electronic devices and air travel, I'm starting to consider a blackberry device. However, I love my Cingular 8125. I've read in other forums that it's feasible to get blackberry software to run on a Wizard. It would be great if a ROM could be developed for Cingular that allows for the use of Blackberry software.
Still no way to run Blackberry on an 8125 - But here's a question - Are you already getting email on your 8125 (e.g., with Direct Push)? If so, how would having a Blackberry client help??
I need the blackberry for work. Otherwise, I would use the push e-mail solutions that exist out there.
There is a separate post on this (Blackberry Connect on Wizard).
It should work now (both AKU1 and AKU 2 roms)
I was able to install the Vodaphone Blackberry software using my existing Cingular ROM. I had failed before using the T-Mobile Blackberry software. Now all I have to do is get it configured to work. One step at a time.
If you install the proper rom and BB Connect client, you can get the BB Connect to work on the 8125, but not using Cingular as a carrier, only T-Mobile since supposedly the gateway is hard-coded in the client to point to T-Mobile.
-Keith
You do not have to change to T-Mo. BB connect on 8125 should work with Cingular network. I just installed BB Connect 2.1.2.16 onto my 8125 with 2.17 ROM, simply put official Cingular SIM with unlimited BB plan, and it immediately started receiving BB mails. I only tried BIS but not BES, though.
I'm still waiting to get my e-mail account set up on our corporate blackberry system to try this out on my 8125. All of the preliminary installation and setup work seems to have worked so far, but until I get this turned on I won't be able to validate this. The reason that I originally posted this was that I couldn't even get the software to install when I tried the T-mobile version. After checking out the blackberry message on the Wizard forum, I found the link to the Vodaphone software and it installed the first time.
...
i have a stock 8125 rom wise besides the newest cingular released update, and i use the push email form my works exchange server and its 10xs faster than my bb so i sold my berry and im using this but my bb addy email i cant get so i was looking into getting bbconnect werking i installed it fine got a pin associated with my device synced with windows mobile desktop bb thing but the network doesnt become avail i always get blocked radio in use..one day somone will figure it out.....but the push got my attn on the 2125 and i sold that and got the 8125 and its been much better than my berry, u cant stream howard stern on your bt hedset while emailing and surfing on a berry well u can surf and email but no stern and no windows, im calling the new rom for wm0 the bb killer if u can use exchange email then your set, i get me emails on my devie b4 my work computer..its great
Re: ...
seankk said:
i have a stock 8125 rom wise besides the newest cingular released update, and i use the push email form my works exchange server and its 10xs faster than my bb so i sold my berry and im using this but my bb addy email i cant get so i was looking into getting bbconnect werking i installed it fine got a pin associated with my device synced with windows mobile desktop bb thing but the network doesnt become avail i always get blocked radio in use..one day somone will figure it out.....but the push got my attn on the 2125 and i sold that and got the 8125 and its been much better than my berry, u cant stream howard stern on your bt hedset while emailing and surfing on a berry well u can surf and email but no stern and no windows, im calling the new rom for wm0 the bb killer if u can use exchange email then your set, i get me emails on my devie b4 my work computer..its great
Click to expand...
Click to collapse
Man you talk fast in one sentence! Scared to death if you get that HS live streaming to work!!!
Re: ...
Thanks in advance for any help.
Sean
ok just for everyone who was trying to get these, i have tried all of them, none work, maybe it's a problem in my BB account still not sure.
i linked all of them here for better support for guys like me.
hi,
I am on Cingular in the Us. Am I able to use any of these cab files to put blackberry on my Tytn or is it network specific and if it is, is there a generic blackberry client I can put on my device?
Thanks,
Gilbert
Gilbert said:
hi,
I am on Cingular in the Us. Am I able to use any of these cab files to put blackberry on my Tytn or is it network specific and if it is, is there a generic blackberry client I can put on my device?
Thanks,
Gilbert
Click to expand...
Click to collapse
most of these 3 could work with any operator as i have been told before but still i think someone who succeeded to activate it would be better to give you the ok.
the Blackberry service depends on your registration with your operator not the application, these are just extracts From the ROMs provided by the operator meaning, you need GPRS, an active BB account to use them.
if your BB account is activated on the provisioning and at Blackberry i see no problem in you using them.
ahassouna said:
Gilbert said:
hi,
I am on Cingular in the Us. Am I able to use any of these cab files to put blackberry on my Tytn or is it network specific and if it is, is there a generic blackberry client I can put on my device?
Thanks,
Gilbert
Click to expand...
Click to collapse
most of these 3 could work with any operator as i have been told before but still i think someone who succeeded to activate it would be better to give you the ok.
the Blackberry service depends on your registration with your operator not the application, these are just extracts From the ROMs provided by the operator meaning, you need GPRS, an active BB account to use them.
if your BB account is activated on the provisioning and at Blackberry i see no problem in you using them.
Click to expand...
Click to collapse
Thanks for this but my thought is, the company I work for has a BB support for exchange. I have GPRS and if I use the BB configuration which they supply, I should be good? right?
Thanks,
Gilbert
Gilbert said:
ahassouna said:
Gilbert said:
hi,
I am on Cingular in the Us. Am I able to use any of these cab files to put blackberry on my Tytn or is it network specific and if it is, is there a generic blackberry client I can put on my device?
Thanks,
Gilbert
Click to expand...
Click to collapse
most of these 3 could work with any operator as i have been told before but still i think someone who succeeded to activate it would be better to give you the ok.
the Blackberry service depends on your registration with your operator not the application, these are just extracts From the ROMs provided by the operator meaning, you need GPRS, an active BB account to use them.
if your BB account is activated on the provisioning and at Blackberry i see no problem in you using them.
Click to expand...
Click to collapse
Thanks for this but my thought is, the company I work for has a BB support for exchange. I have GPRS and if I use the BB configuration which they supply, I should be good? right?
Thanks,
Gilbert
Click to expand...
Click to collapse
since your company uses exchange then apparently you are using Blackberry Enterprise ( meaning you have a license ) thus there is no problem for you to connect.
P.S. i have tried the 3 of them they do read the IP and APN, so i think you should be ok.
One concern though is the PIN, if your PIN is associated with another handheld you will have to contact your provider to deassociate it from the account on the provisioning site to be able to use it on another handheld.
It it possible for me to set up blackberry on a linux email server?
why should i want this
for as far as I know BB gives me pushmail and access to the company's global addressbook.
in wm5 they're both working for me without this BB function.
so, what else is there in BB I want to have?
Re: why should i want this
xdaradar said:
for as far as I know BB gives me pushmail and access to the company's global addressbook.
in wm5 they're both working for me without this BB function.
so, what else is there in BB I want to have?
Click to expand...
Click to collapse
If your company has Exchange with Direct Push, it gives you nothing. If your company had a Domino server and Blackberry, it would give you pushmail and addressbook (and calendar sync).
thx. @work there's a lot of BB devices in use by another part of our merged companies. All talking about their great BB funtions. I think that with my BA including pushmail and accessible global contacts including free/busy info, appointments, etc. I have a lot more functionality.
So you say we can use this BB cab files for both personal (which the BB service that operator gives) and work (which my company uses bb enterprise edition for). We can use for every bb service?
And what number will we use when they ask the PIN (what is it anyway) thing?
Thanks
Configuring Blackberry connect using a UK Tmobile ROM on non-Tmobile service provider
The latest Tmobile UK Rom supports blackberry connect but there doesn't appear to be anyway to configure. Anyone get blackberry connect to work with a non-Tmobile service provider using a BES?
nonereal said:
So you say we can use this BB cab files for both personal (which the BB service that operator gives) and work (which my company uses bb enterprise edition for). We can use for every bb service?
And what number will we use when they ask the PIN (what is it anyway) thing?
Thanks
Click to expand...
Click to collapse
when you setup the cab , after opening the application from start/settings/BlackBerry you will press i agree then you will be set in a screen where a PIN will be generated and connection and server status shown.
Yes you can use for Enterprise and Prosumer BB accounts.
configuring IP address for non-O2 UK
I reverted to the O2 UK ROM 1.40 with the BBConnect. Everything appears to be working but its only sending the message headers. I can do a lookup on my office address book but not receive the entire message contents.
I think the problem is because the IP address for the O2 UK blackberry server is hard coded in the installation as 206.51.26.189 and my office's BES is 206.51.26.xxx (other than 189). I have all three blackberry services loaded (ie. AUP, CICAL and CMIME) but these show an IP address of 206.51.26.192. On the BBConnect status screen it shows an IP address of 100.50.40.197. I'm not sure if this is coming from my local GPRS provider or the blackberry service.
I suspect the problem is that my messages are being routed through the O2 UK blackberry server and as such its only sending the message headers. If this is the case is there a way to modify the dll installation files to change the IP address to the IP address I am using in Indonesia? Which file would need to be changed?
Someone must have gotten this to work outside of the UK so any input appreciated.
ahassouna said:
when you setup the cab , after opening the application from start/settings/BlackBerry you will press i agree then you will be set in a screen where a PIN will be generated and connection and server status shown.
Yes you can use for Enterprise and Prosumer BB accounts.
Click to expand...
Click to collapse
Thanks for the answer.
Did you get any feedback about this?
Seems to me that the connection settings are in XML format in the BBConnectInfo_bb.dll. However this is signed/versioned so you cant just hexedit the address otherwise the dll wont load.
Unfortunately I have no experience with WM5 SDK.
I tried to install the CAB file but it says :
---------
Unable to install.
Uncertified system
software detected.
---------
im using Helmi AKU3.2 v1.3.2 (WM5)
anyone can help pleaaaaaaaaaaaaaaaaaaaaaaase.. im a blackberry Tier 1 support with etisalat operator. also i have a testing sim with BIS (which is blackberry internet service). i would love to make it work on my PDA2K.
vlestat123 said:
I tried to install the CAB file but it says :
---------
Unable to install.
Uncertified system
software detected.
---------
im using Helmi AKU3.2 v1.3.2 (WM5)
anyone can help pleaaaaaaaaaaaaaaaaaaaaaaase.. im a blackberry Tier 1 support with etisalat operator. also i have a testing sim with BIS (which is blackberry internet service). i would love to make it work on my PDA2K.
Click to expand...
Click to collapse
if you are using WM5, i have no idea. i have tried it on wm2003 se and worked great.
also check certification, if you got this handset locked by Etisalat, you may not be able to use it.
i think we need a wm5 expert to advise on this
ahassouna said:
if you are using WM5, i have no idea. i have tried it on wm2003 se and worked great.
also check certification, if you got this handset locked by Etisalat, you may not be able to use it.
i think we need a wm5 expert to advise on this
Click to expand...
Click to collapse
First of all .. thanks for replying me .. as i searched the net i found another CAB file. and i can send it to you or to anyone who likes.
but the problem now that it installed and connected. generated a PIN # .. stayed live connected for 5 minutes after that it disconnected . when i tried to reconnect it connects for couple of seconds then says disconnected.
so i would be trying something during the coming couple of days using a different mobile to see if the network is blocking me or the device have a problem.
Regards
Vlestat123
I now have BBConnect working with my companies enterprise server and I am using Vodafone contract and HTC Wizard.
Last week I was using the Molski custom ROM (fantastic ROM btw) and for the love of god BBconnect would not connect. I would connect for a second or two and then disconnect.
On Monday I installed the latest Vodafone UK ROM that is posted on the FTP server. Reinstalled the Vodafone supplied software for BBConnect and Desktop SYNC, and then connected the phone up to my laptop and exchanged PINS using the supplied Desktop SYNC (BBCONNECT) software supplied my Vodafone.
My GPRS Modem setting is web.vodafone.de (I am based in Cologne) You dont need to enter blackberry.net
Disconnected phone from laptop and all works fine. If anyone wants more info, please let me know.
nmonger said:
I now have BBConnect working with my companies enterprise server and I am using Vodafone contract and HTC Wizard.
Last week I was using the Molski custom ROM (fantastic ROM btw) and for the love of god BBconnect would not connect. I would connect for a second or two and then disconnect.
On Monday I installed the latest Vodafone UK ROM that is posted on the FTP server. Reinstalled the Vodafone supplied software for BBConnect and Desktop SYNC, and then connected the phone up to my laptop and exchanged PINS using the supplied Desktop SYNC (BBCONNECT) software supplied my Vodafone.
My GPRS Modem setting is web.vodafone.de (I am based in Cologne) You dont need to enter blackberry.net
Disconnected phone from laptop and all works fine. If anyone wants more info, please let me know.
Click to expand...
Click to collapse
Yes, please, I have activated with my operator -Vodafone Spain- the BB service and my problem is only works with pop3 accounts, no exchange. Can you send me some way the cabs you mention?
For many of us having BBC running is imperative for our proper "being connected".
RIM choose to be strict on blocking "unsupported" devices and BBC client versions. There is 2 major releases of Blackberry Connect - BC client version 2.X is stable, but limited on features and version 4.X, which has few welcomed additions, but also introduces quite few annoying problems. In this thread we can share our findings, which are either specific to Kaiser / Tilt or do apply to any device.
As a thread starter, I'll bring in the good news for those interested in making BBC2.X running on Kaiser / Tilt - it's simple. In addition to my signature's HEXing of any current WM6 .nbh ROM files, one would simply replace the unicode string "HTC-Kaiser" to "HTC-Hermes" , reflash, change the Aku string to .2.3.0 and BBC2 will work as a charm.
BBC threads collection:
=================
http://forum.xda-developers.com/showthread.php?t=294218
http://forum.xda-developers.com/showthread.php?t=409964
http://forum.xda-developers.com/showthread.php?t=395390
And if you aren't comfortable hex-editing your ROM, the 4.x version of BBC is supported on the Kaiser and Tilt. See these threads for more information.
http://forum.xda-developers.com/showthread.php?t=327695&highlight=blackberry
http://forum.xda-developers.com/showthread.php?t=330910&highlight=blackberry
HELP!! Blackberry Connect NOT working
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Connected. You just have to get provisioned.
jvloyola said:
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Click to expand...
Click to collapse
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
HExing you should be able to make any BBC client to connect on Hermes or Kaiser/Tilt with any current WM6 ROM.
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
I've found a solution to the problem you describe - see my post here:
http://forum.xda-developers.com/showpost.php?p=1608560&postcount=7
Problems getting provisioned
moisha said:
Connected. You just have to get provisioned.
Click to expand...
Click to collapse
That is precisely the problem when aI try to provision my kaiser via BBC Destop I get a sucess mesage but nothing happens, and every time I connect the kaiser says your email is set up for pin "unknown" do you wan to chang it to pin XXXXX?
So I guess I'm not getting provisioned right.
Any ideas?
Vinny
Hello moisha,
i am a bit confused. I had Blackberry 2.1.x running on my Hermes with a patched WM 6 Version. Now I try to implement it myself on my new Kaiser (t-mobile Germany). So far I followd the instructions under
I have not been successful so far. You recommend just to hex HTC-Kaiser to HTC-Hermes. I tried with Hexedit but could not find the string in the nbh file. I use the HTC German ROM for Kaiser (KaiserHTC_GER_1.56.407.3Reconstructed). Can you give me some more hints, how to proceed ???
Thanks ...
Hi All,
I have a Kaiser ROM 1.56.405.5 and Radio 1.27.16.21
I installed the BB Connect delivered on CD and checked ... it is the latest version.
I installed the BBC Desktop on PC and also checked .. it is the latest version.
My mobile operator has already activated my SIM card for BB and it is working because I have the service always connected, I got a PIN and an IP address is always available.
Now, coming to the activation, I had my IT managers who make my email BB enabled and got a password (MS Exchange).
The Blackberry Entrepise Service is activated on the BBC and everything seems working.
As I was not able to activate my email with the given password, I read in several threads that we can do it through the PC with the BBC Desktop.
I did it and it worked .... miracle!
Sending and recieving emails when connected to the PC is perfectly working.
But sending and recieving emails when standalone through wireless is impossible. My email is visible and seems activated on Kaiser BBC.
Eventhough the radio tunnel seems to be connected and active (either on EDGE or 3G), no way to have it working normally.
Question 1:
Can my mobile operator be blocking the usage of HTC on the network in order to oblige buying a BB handset?
If yes, why do I have a Radio BB Connection always active?
Question 2:
Do I need for a while before getting my email "really" activated by BB?
Is it linked to the fact that I never succeed to use the password given by my IT people?
Question 3:
Is it possible that I need to configure my GPRS connection? I read somewhere that the APN could be different and sometimes we need to chaneg the registery keys. My understand was that this is needed for older versions of BBC.
I am just trying to understand whether I have to shoot on my IT people (they will not like it because of the policy: Nothing else that BB handsets!) or to shoot on my mobile operator who can also have the same policy.
Thanks for your help.
Marko
I have always had to use the blackberry desktop to provision a blackberry connect device for bes.
Check your settings and connections. You should have a connection for blackberry.
You also should have a blackberry icon at the bottom right of your home screen. Click this and check your blackberry settings such as identity (pin, imei, ip address), status (connected), email settings, services (some of the individual services have settings which you should check).
Hi
Yes everything you said is OK
What are the settings for the services?
I have no clue.
One of them is not running: IPPP for 5 click [IPPP] !!
Thx
Marko
Is your ROM a 6.1 ROM? I can't tell by just the numbers. If it is Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
Not sure why 6.1 does that but it worked for me.
Thanks to Dutty for the above instructions
my ROM ver is 1.56.405.5 Radio is 1.27.16.21
Register is OK
What should I do with the password given by my IT guys? I didn't use it.
THX
Marko
Hehe
Just found out that my ROM is WM 6.0 can it come from this ?
Thx
Marko
I used the BB Connect software on my pc, clicked configure handset and it did all the work for me, I didn't need to enter a password.
You might need to go into BB security and set a password for the handset.
Hi
I flashed a new ROM with 6.1 on my Kaiser.
BBC version .100
Radio is ok and got PIN
BBC Desktop configured my the balckberry services on Kaiser.
Even, sent and recieved email when connected to PC with BBC Desktop.
BUT ... when I am on wireles, no way to make it working.
Thx for your help.
Marko
Guys,
It was my provider. Now everything seems working even in roaming.
They put me on BIS and when I asked for BES, they proposed to me a new thing: BB Multinational.
Just be careful all, there is not only BIS and BES but also BB Multinational with some providers.
Cheers.
Marko