I upgrade my Wizard with aWizard but failed,so I reflesh the ROM with RUU_wizard,there are no problem in upgrading process,but when I reboot the device ， It jamed on boot on screen。Does it happened on you,pls help me!!!
Related
Hi friends,
I am very new to upgrading\downgrading pc phones. I was trying to upgrade my wizard to upload diffirent language ROM, using this method :-
http://forum.xda-developers.com/viewtopic.php?t=56088
After some tries, I succeeded to upgrade rom, but after this power on the wizard and it stuck into startup screen.
If I press Camera + Power swich it shows three colour screen and some text :
IPL 2.16. 0001
SPL 2.16 0001
I think my device was CID locked and G4, and that is why I have a dead wizard.
I have backed up the phone before upgrading with wizBackup.exe and I have back files on my hard disk. I dont know how to restore rom from these backup files. :?: :?: :?:
Please help me to revive my PC.
Thanks in advance
Singh06 said:
Hi friends,
I am very new to upgrading\downgrading pc phones. I was trying to upgrade my wizard to upload diffirent language ROM, using this method :-
http://forum.xda-developers.com/viewtopic.php?t=56088
After some tries, I succeeded to upgrade rom, but after this power on the wizard and it stuck into startup screen.
If I press Camera + Power swich it shows three colour screen and some text :
IPL 2.16. 0001
SPL 2.16 0001
I think my device was CID locked and G4, and that is why I have a dead wizard.
I have backed up the phone before upgrading with wizBackup.exe and I have back files on my hard disk. I dont know how to restore rom from these backup files. :?: :?: :?:
Please help me to revive my PC.
Thanks in advance
Click to expand...
Click to collapse
Your phone is not dead!!!
If you can get to the three color sceen then your botloader is intact (and preserving the bootloader was the point with the tutorial that you followed).
Your phone is CID locked and is G4, that's right, but this is NOT the reason for the problem. The tutorial you followed, which incidentally I wrote, deals with CID locked G4 phone like yours.
The problem you had is probably due to a not correctly cooked rom.
Anyway, don't worry. You got the three colors screen so you can connect your phone to USB (even if activesync won't recognise it) and flash your factory rom (the one you were trying to replace). Don't need to use your backup: simply download the original rom from the manufacturer/operator site.
bye
After many tries now my phone is working again,
I downloaded RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship from internet then cooked its nk.nbf file.
then uploaded the rom and phone is working again. Thanks for your help
Singh06 said:
After many tries now my phone is working again,
I downloaded RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship from internet then cooked its nk.nbf file.
then uploaded the rom and phone is working again. Thanks for your help
Click to expand...
Click to collapse
I glad you worked it out!
Bye
hello. I have similar problem. I upgraded my wizard to AKU2.3 and now phone doesn't start. It start showing splash screen with the information:
IPL:2.24
SPL:2.24
GSM:02.25.11
OS:2.24.10.1
HOW to fix this problem ?
hi guys
i have qtek wiza200 today i'm use MrClean_RUU_WIZARD_224a_AKU23_WWE.zip after flashing my phone turn on and installing all soft and restart and dead my phone. i'm push camera+power+reset i can't enter to boot mode. help me to repair my cellphone and how resolve my problem. my phone forever dead????
thanks a lot
hello, everybody, i just upgraded my O2 XDA MINI S with AKU 3.2, it stopped at 99%.
Now, my phone cannot start up, cannot connect with PC at all.
Please do help. thank you very much
you must install a rom with bootloader 1.x eg.(buttons 1.05 rom)first then a rom with bootloader 2.x eg.(molski 30mb rom) then you can install a AKU3.2 rom.
this solved my 99% hang and i am 99% sure it will solve it for you. please reply if it works.
could you please tell me how to install a rom with bootloader 1.x eg.(buttons 1.05 rom)?
my phone cannot connect with the PC at the moment.
Many thanks for your help
if you waited to long during the hang and the battery drained then i think you might have a brick if not soft reset and install buttons rom
it it is in bootloader mode then the rom installer will connect to the device
thank you very much, where i can find a 'buttons rom'. Really sorry to trouble you, i am not familar with upgrading at all.
my phone cannot start, after reset, it shows IPL and SPL, then reset itself again and again.
What i can do if it can not connect with my PC?
liuyin430 said:
my phone cannot start, after reset, it shows IPL and SPL, then reset itself again and again.
What i can do if it can not connect with my PC?
Click to expand...
Click to collapse
Before anyone can REALLY help you you need to post a little more info.
What IPL/SPL Versions are currently on your device.
Do you know if you have a G3 or G4 flashchip?
IPL/SPL 1.05
G3
the problem is it cannot boot at all.
thanks every body.
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.
i am problem whit my qtek 9100 (htc wizard)
my qtek is flashing whit rom win-mobile v4 , and the os is very slow, wifi is not work , usb too, the bluethoo is ok is working im sync on my computer whit bluethoo but the upgrade tool on www.qtek.nl , for the original updated rom windows m 5 is not work, error message is , problem communication whit computer and pocket pc, but the pocket pc is sync whit my computer...
i need help for the ultimate method for flashing whit a bluethooth method , im repeat usb is not working , please i need help or the qtek is go to trash... snif
os 1.5.4.2 wm 5
ipl 1.01
spl 2.17
g3
thanks for your helping
my mail is [email protected]
Hi pretty sure you can't flash over bluetooth. If you know someone else with a wizard they could back up there rom onto an SD card which could then be loaded onto your device. Hope this helps
Hi pretty sure you can't flash over bluetooth.
f you know someone else with a wizard they
could back up there rom onto an SD card
which could then be loaded onto your device.
Hope this helps
hi, i have same problem with htc wizard, ipl 1.01 spl 2.17 os 1.5.4.2, and it is stuck in startup, i can`t make hard reset, i cant backup rom to sd because cid is locked. So i have to find who has same phone ant ask to send me rom backup to me?
sorry, my english is not very good...
has anybody this ROM to test?
T-mobile German. AKU3.3_38222_382117_026921_TMO_DE_GER
I don't find this here and on t-mobile
my device stucks on bootloader, t-mobile english wm5 rom flashing works but no boot.
Hardreset doesn't work, format fails.
thanx
Hi!
Here it is,but it won't help
http://www.4shared.com/file/166521050/89e7d91d/ruu_compactii_aku33_38222_3821.html
BR
Scootie
Hey Choop, helped the procedure from scootie?