Related
Happy new Year and thank you for yor feedback, I may be late to the party but my work is killing my spare time. So, Iam trying to update the walkrthough to cope with the ongoing developments.
On a side note I've upgraded my xperia to an android device but Iam keeping it for jailbreaking purposes
Lets get it on!
Assuming your device is covered in the compatibility list you have to have the device rooted.
For how to Root (HARD-SPL) Your Xperia X1 check Here!!
Then its a matter of OS, in this thread we are talking about HTC Devices that run WinMo as a native Operating System. This hack works only in Linux enviroment so we need Android to run on the device.
How to run android depends on the particular device so one must go to the respective thread.
For Xperia its this thread
The Froyo Development has stopped but the current version is far superior than what we used some months ago.
In short dowload the xdandroid stuff, put the unrared files on your sd's root and boot through HARET once.
-
We now should be at a point that our device boots normally to The 2.2 froyo android version through Haret. Then we have to replace the module and zImage files with the PSfreedom respective ones plus the psfreedom.ko file. All these should be placed and overriten in the root folder of the SDCard.
Here is the latest Payload for Xperia
(need some help with the changes, but Iam impressed so far with the outcome)
All the preliminary work is done, now for the ****ty "do this everytime you wanna play back ups" job
Assuming the phone is off...
Turn it on
Wait for winmo to boot then run HARET from the device's file manager
Wait till android fully boots and navigate to the menu->DevTools->Terminal Emulator
in the terminal you must enter the following lines...
su(enter)
cd(space)/sdcard(enter)
insmod(space)psfreedom.ko(enter)
Click to expand...
Click to collapse
At this point the phone is ready
Pull out the power cord of the PS3 (or flip the backswitch to off)
insert the phone at the first usb port (preferably with the shortest USB cable you can find)
flip the switch or insert the power cord
wait 3 to 4 seconds
press power on followed quickly by eject
you should hear 3 short blips
it takes 5 seconds for PS3 to boot
and DONE.
if it doesnt succed just repeat the process. if it never suceeds then you don't run @ 3.41 FW
[UPDATE#0] I Updated the PSFreedom Files link from the "Homebrew only" Free version to the Backup Enabled "Full" Version. Still Ver 1.0 though...
[UPDATE#1] It definatly needs 4,5 tries, I cannot get it to work in the first try...
[UPDATE#2] Everytime I try to run a backup my FAT PS3 Freezes... and to think I came this close...
[UPDATE#3] Stupid me, didn't check it out in the above compatibility list... tried another one works like a charm
[UPDATE#4] If you are 100% sure you did everything right and still you cannot perform the exploit on the console you should not turn off the device and boot it again, you can have it in terminal mode as long as you wish and perform the exploit on the PS3 again and again... This is also usefull when the console freezes or crashes, you just perform the power cycle only!!
Well There goes one day of my life I think I covered more than the basics, If you thing I helped you I would appreciate a line or two
[UPDATE#5] Went out today and felt like spending 300 Euros, got my self a Slim one. I will be testing it later today...
[UPDATE#6] I found out that the PS3 Slim model has a much greater success rate for the hack to work. Also, I tried all the steps and bypassed the active sync stuff and I can confirm that by bypassing it, IT WILL NOT WORK
[UPDATE#7] 5 Days into this and 3 with the slim model, slim works better BUT, the problems occure because of the xperia hardware/xdandroid port... it works but not always, its nerve wracking I know, so do the Developers of PS Freedom as they updated their wiki Raphael page page in the problems worning section.
aaaanyway, Tomorow Iam upgrading my HDD my old one is full.
[UPDATE#8] 11 days later and I have updated my fat ps3 to 3.42 and kept my slim hacked. Its a tedious work to enable every time xdandroid and the psfreedom hack but as I said it is free, anyway, having the slim console AND a very short cable (mine is 10cm) works EVERY SINGLE TIME, no probs with that. I had though 2 issues of console freezing... I don't know if it is the hack or my new HDD (7200rpm) nothing serious though...
[UPDATE#9] I've tried to replace the active sync step and connected the device to ps3, first time it worked, second time it failed...
[UPDATE#10] Well, thats it for me, I could no longer cope with the tedious steps in order to play for an hour, I've bought a jailbreak clone and flashed my xperia with a diffrent rom and formatted my SDcard. for the time being, Iam no longer using the Raphael hack...
[UPDATE#11] As it turns out my jailbreak clone is not upgradable (it was damn cheap after all). Anyways, I browsed to PSFREEDOM.com to see the development of the raphael hack and to my surprise i found out two things...
a) This thread is hotlinkedvia this page http://psfreedom.com/wiki/Sony_Ericsson_XPERIA_X1, which is kinda cool I guess...
b) I found out (probably need to read my thread a little bit more ) that more recent hermes payloads are been released for xperia...
So, I will refresh any broken links, start again, and keep updated this first post agains the willings of our beloved sony
[Update#12] The true reason that I returned is that my fat PS3 pulled a YLOD on me and left me empty handed this holiday season, so I dusted off my jailbreaked one
Click to expand...
Click to collapse
I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown
ldghn said:
I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown
Click to expand...
Click to collapse
The same thing happened with me the first few tries, this message means that the process is not right, I solved this issue by re formatting xdandroid again and carefully placing and overrighting the files...
When you are 100% certain that the procedure is right (according to my walkthroug) then its only a matter o timing... keep trying mate.
First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??
ldghn said:
First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??
Click to expand...
Click to collapse
I think its very clear that you have to boot on android at least once with the original files....
(the initial install and calibration)
I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.
ldghn said:
I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.
Click to expand...
Click to collapse
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...
Jim P said:
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...
Click to expand...
Click to collapse
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent
ldghn said:
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent
Click to expand...
Click to collapse
Then you didn't do the exploit... back to the drawing board my friend
Thank You soo much! It works on first try
error
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
What I have gathered together in this walkthrough is what many people suggested and some other people including me found usefull and working.
You probably don't have the proper file arrangement in your SD card
and the actual command line is "cd sdcard" to access the sd card and thed "cd andboot" to access the "andboot" folder where the PS Freedom files reside.
hope I helped
trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx
hi mr i while insert cd andboot write in terminal can't cd to andboot and while connect to ps3 write an unknwon device is connected please help me thanks
teksound said:
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx
Click to expand...
Click to collapse
yeah. earlier I placed EVERYTHING in the root instead of making a folder called "andboot" so I'm going to do that again and see what I get. I think it's a bad psfreedom.ko file.
People...
When you installed xdandroid on your xperia the guy who made the port said that you have to create an andboot folder to place the android kernel inside...
so by default you have an andboot folder.
then its a matter of overiting 2 files there... simple as that.
Finally i did it
It works for me now
Perhaps i am stupid, but i cannot get it to work. This is how i do it:
Copy the android files to the sdcard and boot it in the phone with the haret.exe (takes a loooong time to boot). Reboot the phone back to WM, copy over the files module and zImage file, boot back into android with haret, startup terminal, write in the commands and so on. I start up the PS3 as instructed but i only get the message unknown USB and I cannot see any install pkg file.
I have tried and read all the instructions but I cannot understand what I am doing wrong, anyone have a tip?
helps needed
i have been trying make it work all day with no luck. mine is a uk version X1 with original rom. i followed instruction step by step and even reinstall the andriod port several times. however, still not working. always appear unknown usb device on ps3 screen. the only thing i didnt do is that flashing the SPL. is it a necessary step? what's the purpose for flashing the SPL?
actually, the module files from android and the one from psfreedom didn't have the same name... is this an issue ? witch name we have to keep ?
thx for the tuto !
http://forum.xda-developers.com/showthread.php?t=1119555
Logically speaking, this application should also work with the Bionic correct?
Just wondering, if its deemed safe in this thread to attempt using, I will try it and post back with results.
---------- Post added at 12:30 AM ---------- Previous post was at 12:08 AM ----------
Okay, so I just backed up everything and tried the app, which won't work due to the fact that it checks the phone model number, Theres a manual guide to get ubuntu running on the atrix, and I'm going to start from scratch there. Probably going to be a couple of days before I do anything since I need a new microhdmi...
I tried the app that comes with it to partition the sdcard but it does a device check then it stops with an error message that the device is not an Olympus (Atrix). Maybe we can get the dev to check on the differences, albeit small, for the Atrix and the Bionic.
Worth a shot. I've been playing around with /osh for a few days but had to reflash to stock due to the lapdock staying on the screensaver.
Hey guys, I am working on the same thing at the moment trying to port over Sogarth's method of unlocking the 10.10 maverick build of Ubuntu on our phones.
http://forum.xda-developers.com/showthread.php?t=1000316
The link here is for his old automated .bat script he made for the Atrix that I believe will work for our phones with a little modification to it to reflect Maverick packages instead of the Jaunty packages for their phones.
Please jump into the irc in my sig because I would like to get this going as well.
I would hop in IRC but I'm about to head out the door.
I'm currently approaching this situation from two directions:
1.) I'm dumping /osh/ (webtop partition) and uploading it to dropbox as soon as I can get a complete dump. (hopefully tonight) and providing it to the original Atrix dev to see if he can hook us up with an app to help do whats needed
2.) I'm also attempting the manual method as soon as I get a new microHDMI cable (I was using a cheap adapter).
You are 100% correct though, you should be able to get that install script working just by changing the packages to reflect the updated Ubuntu. MAKE SURE you backup ANY files before you change them (and preferably a complete backup of /osh/. Since we have SU on our phones we have free reign over the /osh partition, so be careful in there.
OT: I can't wait until we can get on-demand CPU overclocking for this thing... if it clocks as well as past mobile chips... Toggle 1.2-1.4ghz and plug it in the LapDock. You'd have a damned fine netbook...
(Not necessarily talking to any experienced users or noobs, the disclaimer about Linux & SU is for everyone reading this thread - I'm relatively experienced in the Linux world... and I need to be reminded of SU's power sometimes.)
I just realized that their phone's Ubuntu distribution is under the 9.x series versus the 10.x series. A lot of Major changes happened to Ubuntu between 9.x and 10.x that affected the way the operating system talked to devices and booted, they stopped using HAL and moved to a new boot method, I am uncertain whether or not the install script will work or not, though I'm somewhat confident it will, given the nature of webtop (Android does the hardware abstraction, and the booting, we just run a second set of executable's on a different X window session attached to a different display) This should mean that the portions that would normally prevent us from just duplicated the script are omitted from the Ubuntu distribution entirely. As long as we keep a backup we should still be fine.
No worries, just remember to keep FXZ and RSD handy. I've screwed up the /osh partition a couple times but that has saved me from complete disaster so far
Good call on bringing this up. Let me know if you need to test anything for this.
@xaero252
So I modified Sogarth's script to use Maverick build of all the tools it downloads and installs but the problem with the script is that it needs the phone to have the ro.secure=0 so that ADB always launches with root access without manually initiating su each line of code. I am not sure if there is a way around it or if we have to modify the script differently. Anywho, I've upload a copy of the work I've done to the script.
Is it just an sh script? If so and ut doesn't reboot the phone at all you could launch a SU terminal and do "su sh script.sh"
oh i see the issue now... we would have to be able to edit the boot loader for that method... if i'm correct though his android app doesnt use the pc for much... if you change that variable on boot do you think it woukd work?
Hmm, I have an idea, its not as polished as the pc based script, however it should still work presuming you can get a SU terminal to run on the phone ( I happen to have one running right now ) I'm going to see if I can't adapt that to a bash script. probably going to take a while.
Curiously we happen to have a 1.5gb partition for Ubuntu on built in memory, where as the atrix only had a 600 or so mb partition... This is great because we should likely be able to continue to install /, /boot and such to internal memory, and use the sd card (even left as ntfs) for /home...
Couple of things: reading through the script it looks like 100% of the commands he runs could be run on the phone via a bash script run as su. The idea is this: convert the entire script over to bash, copy the script, and the required files to the phone, and execute the script from the phone. The only other concern I can see is the wget package included with the script not being compatible with maverick, which doesn't seem likely.
I'm gonna start working on rewriting the script linux native. My idea is to use a terminal emulator (they are free on the market) and run su script.sh and pray. I need to get a new microHDMI before I do this though, so I can test my results reliably.
xaero252 said:
Is it just an sh script? If so and ut doesn't reboot the phone at all you could launch a SU terminal and do "su sh script.sh"
oh i see the issue now... we would have to be able to edit the boot loader for that method... if i'm correct though his android app doesnt use the pc for much... if you change that variable on boot do you think it woukd work?
Click to expand...
Click to collapse
As far as correcting that, no one has attempted doing custom kernels yet so to do the edit to get root access out of the gate is moot at this point.
Hmm, I have an idea, its not as polished as the pc based script, however it should still work presuming you can get a SU terminal to run on the phone ( I happen to have one running right now ) I'm going to see if I can't adapt that to a bash script. probably going to take a while.
Click to expand...
Click to collapse
Your linux skills are probably 10 folds better than mine but I believe if you convert my modified script, which has all the necessary links to the correct packages for our phone, then it might just work.
Curiously we happen to have a 1.5gb partition for Ubuntu on built in memory, where as the atrix only had a 600 or so mb partition... This is great because we should likely be able to continue to install /, /boot and such to internal memory, and use the sd card (even left as ntfs) for /home...
Couple of things: reading through the script it looks like 100% of the commands he runs could be run on the phone via a bash script run as su. The idea is this: convert the entire script over to bash, copy the script, and the required files to the phone, and execute the script from the phone. The only other concern I can see is the wget package included with the script not being compatible with maverick, which doesn't seem likely.
Click to expand...
Click to collapse
The WGET I packaged in the .zip is the correct for Maverick along with all the files in the \bin directory are corrected to match our phone. If you can convert all this to a bash script, that would be awesome instead having to do each command via ADB Shell. The only problem I had with this is every time I tried to run the DPKG command on the .deb I downloaded manually, it threw up an error saying it could not find the file or destination.
On a side note, you are correct that we have 1.5gb partition opposed to their 700mb so we could honestly forget the part about creating a ubuntu.disk on the /data partition and modify the /osh directly for now until the time we need more space. After that, we can see if Sogarth will incorporate your script into his Webtop2sd app or we could make a 3gb ubuntu.disk on the /data partition since we have plenty of space there.
I'm gonna start working on rewriting the script linux native. My idea is to use a terminal emulator (they are free on the market) and run su script.sh and pray. I need to get a new microHDMI before I do this though, so I can test my results reliably.
Click to expand...
Click to collapse
Make sure you get the adapter as well to trigger Webtop cause at the moment our phone wont do webtop directly over HDMI without the HD Dock, Webtop adapter or Laptop dock. If you want to test the script out for now, hit me with the script and I will test it for ya
editi guess sdcard is incorrect/confusing for my situation, it's the entire system up to root folders is stuck in a read-only type state.
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected]ost #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
plasticsoldier said:
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected] #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
Click to expand...
Click to collapse
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
plasticsoldier said:
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
Click to expand...
Click to collapse
I would suggest trying to restore down to WebOS 3.0. In that procedure you literally wipe EVERYTHING on the internal partitions in novaterm and start from absolute scratch. Therefore, if it a software issue you could solve the problem. However, if it is a hardware issue, you'd be kinda screwed.
Yeah, none of the methods I've ended up finding about this problem or other bricked problems are working at all.
i checked at work when i bought it, which of course the 11th was the year mark... but I do have android installed so even if i can get any chance of them honouring it so close they'll probably be like "oh you have android, that'll be $$$ for us to do anything. thanks!"
So I guess I now I have a paperweight with some features.
cdzo72 said:
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
There is a thread in the General forum about how to restore and downgrade. Have you tried that thread ? It is usually a great way to try and get that last restore before sending it back to HP.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App
how are you adding and deleting files when in android? which version of android do you have installed? have you tried different rom versions? have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to? it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard? are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android? have you run "fix permissions"? Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
sstar said:
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
Click to expand...
Click to collapse
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
cdzo72 said:
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the answer, this would tend to suggest that the problem is software based corrupted or otherwise. I am trying to find a program that will allow me to read/format the Android partition on my windows computer and will let you know if come up with anything.
Regards
i guess i should change the title slightly.. it's not sdcard, but basically the entire touchpad contents. go to root and delete whatever i want and it doesn't matter. connect it and format with windows and it doesn't actually matter.
haxin said:
how are you adding and deleting files when in android?
Click to expand...
Click to collapse
i've added and deleted just by using mtp. i've also deleted the files on the android side with the video player (vplayer) i've installed es file explorer (which after restart is gone) and deleted with that. i've also gone into webos and installed internalz pro and deleted files that way, which it then seems to work until i of course do anything related to restarting.
some of the files i've put on, i've had it recognize briefly. so for the video file, start it, then it gets really choppy/glitchy playing it. so stop it, go back into the vplayer and it's back to the old stuff
which version of android do you have installed? have you tried different rom versions?
Click to expand...
Click to collapse
android version 4.0.3. nothing else will install. if i add files while in android, when i boot into cwm they are gone. if i mount usb in cwm and add them they stay briefly but when i try to flash them they fail.
have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to?
Click to expand...
Click to collapse
i have not tried adb yet, just not as familiar using it properly, i will give it a try though.
i am using windows 7 on my laptop currently. i do have a pc upstairs that i barely use that has vista, but i don't know how that would make a difference to the touchpad
it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard?
Click to expand...
Click to collapse
yeah as i put above i guess saying sdcard was a bit confusing/misleading (my bad, sorry!), i didn't really know what else to call it at the time or how to explain myself properly at first.
are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android?
Click to expand...
Click to collapse
i can move/delete/modify anything which has absolutely no effect to the device. i've used es file explorer and gone up to root and deleted everything and the system runs fine. says the system is empty with lots of free space (its the 32gb model) but restart or even go into recovery and everything is once again there.
have you run "fix permissions"?
Click to expand...
Click to collapse
i've run it a few times. just acts likes it's working and then says done. i've even gone into the mounts and storage in cwm and formatted sdcard/cache/data/system. does nothing at all in the end of things
Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
Click to expand...
Click to collapse
it was just something to try to get somewhere right. it never gets past 12%. always fails to reboot.
I am currently letting the battery drain and see if it dying and then being charged will do anything. probably not. but who knows. i talked to a "tech" on the chat support (i never mentioned android) who told me that having preware installed in webos causing it to become corrupt and they "don't knowledge of preware installed devices" exact words. no idea what that means haha don't have knowledge, don't acknowledge...
anyhow. i've not quite given up. i just don't really see it turning out any differently from the previous times. i do appreciate all the feedback and help very much though
ok so heres what I would try. First try flashing a new fresh rom. download one that you want to your computer like cm9 nightly or aokp or whatever you feel like. then boot into CWM recovery connect the touchpad to the computer via usb. then connect to the touchpad with adb. I'm not sure how to do this in windows because it's been so long since I've done it on a windows box, I always use linux.
adb has alot of options, you can move files to and from the device, you can uninstall or install app packages, and more. this way you can adb push the rom .zip to the touchpad's sdcard while youre in cwm recovery. this way you dont have to reboot the touchpad and risk having the file disappear, you can just go to 'install zip from sdcard' and then 'choose zip from sdcard' in cwm recovery after you adb push the rom, you should see it in the folder you pushed it to on the sdcard.
If you arent familiar with how to use adb from the command line or the terminal this might not make alot of sense and i dont know how better to explain it than that. Also yes windows 7 vs windows vista does make a difference there are issues with novacom installing properly, that's why you would have problems running acmeuninstaller or acmeinstaller2. if you look around you should find some videos or how to's that can probably explain it better. Hope this helps.
http://www.webos-internals.org/wiki/Novacom_with_Windows_7
http://forums.webosnation.com/webos-internals/295881-webos-doctor-12-issue-fixed-5.html
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
ve6ay said:
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
Click to expand...
Click to collapse
Probably the best suggestion yet given that everything else has been tried.
Good luck.
****EDIT****
Before you attempt the step above I have just noticed a difference between between cwm and. TWRP2.2 which I have installed on my Touchpad via goo manager. If I open recovery via goo manager and then select wipe it gives me 4 options cache, davlik, factory reset AND system which i think says will remove your rom . I don't see the forth option available with the regular cwm/clockwork. Just a thought.
All the best with whatever you try next.
sstar said:
Probably the best suggestion yet given that everything else has been tried.
Good luck.
Click to expand...
Click to collapse
this would work, however you have to fix you novacom/novaterm issues on your windows machine before you'll be able to do any of this. the reason acmeuninstaller, acmeinstaller2 arent working is likely because youre on a windows7 64bit box and Palm-sdk, the novacomd.exe, noverm.exe, and javaruntime apps and drivers arent setup right. just make sure you have the proper javaupdates on your computer then you can install preware in webos, preware has some nice tools that will delete the entire android install partitions, one is called 'remove android' and the other is called 'tailor' you run them from within webos. after you do that then in webos you should do a full device reset. you'll find it in the "info" tab under settings in webos. this will delete and reformat the whole /media ,(aka sdcard) partition. so you will lose all the files you have stored on both webos and android. that format will take a long time probably like 30 min or more. after thats done. reboot the hp and run webosdoctor. now i know for sure this will work because ive done it on mine. remember to put the touchpad in developer mode in webos first to install preware. you can do that by typing webos20090606 into the webos search bar and hitting enter. I'll put links from my box.com accou t to everything you need.
https://www.box.com/s/479acdb6ef9c99fc7b92
https://www.box.com/s/1aed4722990aad251570
edit: also I'm not sure if youre on the 16gig 32gig or 64gig pad, the webosdoctor that i linked is for 32gig wifi only US version. if thats not what you have then youll need to get the doctor for for specific touchpad. or you could create a webosmetadoctor but thats a whole nother project.
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
plasticsoldier said:
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Click to expand...
Click to collapse
ok no one will be able to help you fix this issue unless you give complete details of the problems. when you say " novacom/novaterm stuff doesn't work" we cant really help specific error details is what i need. I dont mind helping you fix this but you have to be a little more specific on exactly what,where, and how youre installing and running and mounting apps and directories.
your problem IS fixable but you need to slow down and really do things exactly step by step.
Ok so back to ./adb. now when you boot in to CWM recovery on he touchpad DONT do anything in CWM just plug it into the computer. do not mount it as a usb storage and dont mount or unmount the sd partition LEAVE IT.
you can then use ./adb from the command line or terminal on the computer to move the files to the touchpad' or install apk's uninstall apk's you name it. This will require that you know some linux terminal commands. for example to move a new rom zip to the internal sd card or into any other folder you can use ./adb push command to run a root shell on the android device itself you can use ./adb shell and then change folder and file properties from readonly to rw. this can all be done while the touchpad is patiently waitng in CWM recovery. this way when youre done installing or uninstalling apps from the device and moving flash zips to it, you can disconnect the .adb connection with ./adb disconnect or just type exit from the terminal till it closes. unplug it then you will be able to pick up the touchpad and install zip from the sdcard, keep in mind you dont want to choose 'apply u[date from sdcard' you want to use the 'install zip from sdcard option' you can read up more on how adb works. it is probally the most important part of hacking android.
with that being said. novaterm is the palm webos version of .adb. this is why when you boot into webos recovery to do things like acmeinstaller and acmeuninstaller2 the novaterm novacom and novacomd apps have to be installed correctly on the computer or else you wont be going anywhere fast. some screenshot examples of how it should appear below.
https://www.box.com/s/432e63a83215f00eea6a
https://www.box.com/s/970bc29542a05f98f036
https://www.box.com/s/63c0f656e8354f7f2d6a
https://www.box.com/s/cbe3266467ae8e3ebabe
https://www.box.com/s/005e56a61a178dd17fa4 some better resolution images.
Plasticsoldier said
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Yes there is
Firstly tailor does exist, it is a beta and the facility to dl must be enabled.
Read this and scroll down to Enabling beta test feeds and follow the instructions , when you get as far as using the Linux command you CAN copy and paste thank God.
http://en.m.webos-internals.org/wiki/Testing_Feeds?wasRedirected=true . After that reboot into Webos and launch preware. Go into managed feeds as per the instructions in the link above and install Tailor. Reboot again and the app will work. It looks very good actually.
But before attempting to actually use Tailor please read the article I have posted below it is only 7 pages long but will explain how to use Taylor properly as it is a powerful tool.
http://forums.webosnation.com/webos...partition-filesystem-editor-beta-testing.html
I have done all of this , this morning so if you have any problems pm me or ask in this thread.
I sincerely hope that this helps, it should be the answer to your problems.
@haxin: sorry, wasn't trying to be unhelpful when everyone is being helpful to me. I shall be more detailed in future responses. I think i was getting frustrated and had had a busy exhausting day so it didn't help me come across clearly/properly.
OK, so I had preware installed already, so I removed it, went into developer mode, used the linux commands, reinstalled preware, added Tailor.
(i've done this a few times, because I didn't remove the cable after doing the linux commands for preware, then i accidentally hit the wrong buttons and it connected to 'usb drive' mode and wouldn't connect on the pc side and got stuck on the "ow disconnected me properly next time" screen).
So it gives me the following options
USB (media)
Android (system)
Android (cache)
Android (data)
Unused Space
the 'usb media' starts mounted and will mount again if unmounted. If I use 'check filesystem' it'll pass. So then I try 'delete partition' which pretends to delete, then it takes me to the unused partition which is still at 16mb. so i try to use "check filesystem' again and it fails. try repair and it fails as well
I've tried mounting the android parts just to see, they just sit there processing that they are trying to mount. trying to delete or anything else fails as well.
and now after trying things, any of the 'cards' will try to open and just sit there grey. and with my usb cable not plugged in it still is giving me the option to enter usb drive mode. and with this i have to restart and go through the steps again of adding Tailor which is getting tedious.
I restarted, went through the motions to get back to Tailor. trying out resizing just to see how that goes. So far 15%. not sure what will happen when done, but we will see.
This is getting long, so i'll end this part and update on anything and also try to familiarize myself with adb a tad more
Right before the Introduction, I am not responsible for anything you do to you Phone, you are free to do or not to do what I am explaining to you so its on your own risk...
Introduction:
Ok guys so here we are, trying to install a Linux Distro on our awesome x86 Phone...
Damn this doesnt work because our Android is compiled in a different way than ARM Android so we have to wait for better Docs or someone who can get the bootloader to laod a different OS...
But you dont want to wait right?
So here we go, the only alternative:
Chroot into Linux
Description:
Chrooting lets you run annother Linux on top of the currently running Linux (what Android actually is...more or less).
So you mount an existing Linux and simply run it.
What I want to do:
I want to guide you through chrooting and setting up an Arch Linux on your RAZR i.
Requirements:
You need:
A micro SD card (I used a 8GB sized one but 4GB/more than 8 should also work, you just have to adjust some Steps)
An Arch Linux Image (I will give you a link)
(Not required but I will focus on this Platform because I use it myself and it works best, I guess)
A Linux PC running Virtual Box
Tutorial:
First you need an Arch Linux Image. Any other Linux Distro should work fine, but others also take up a lot more Space and Ubuntu for Example has many Problems running in Chroot (because Canonical did some S***).
I used this one:
Arch Linux 2012.10.06
Again, any Version should work fine, just took the latest one
So lets set up our System...
Start Virtual Box and create a new System.
Create a new Hard Drive and size it so it fits onto your micro SD.
I used 5 GB-7.5GB on a 8GB micro SD.
Insert the downloaded ISO FIle into the Virtual Box CD Drive and start your Virtual Machine.
Select the i686 mode (because or CPU is 32bit not 64bit)
If you have the wrong Keyboard Layout Follow this Keyboard Setup Keyboard Config
Next you need to partition the HDD: Partitioning the HDD
Now Install the Base System: Install the Base System
After this follow the next Steps on the Arch WIki (Generate an fstab, Chroot and configure the base system, Set the root password and add a regular user)
DO not reboot because you didnt create a Bootloader (not required for chrooting), instead go to the "Extra" Section and follow all Steps till troubleshooting (DO NOT REBOOT AND DO NOT STARTX this didnt work for, might for you, might not and then you have to cold reboot the VM)
Now you can reboot Again enter the Live System, load your keymap and chroot into the system
You might already install some Packages like a VNC server (pacman -S tightvnc) which will be required for a Graphical User Interface later...
To create the Image you need later, the easiest way for me to pull the Image out of the VM (which has no space for this Image) because the Virtual Box Plugin didnt work for me is sshfs.
I highly recommend to install an ssh server ond the sshfs system into you arch.
If you have done so, mount your PC from inside the VM so you can put the Image on your PC's HDD.
now to create an Image of your Arch theres one command and two ways:
You create an Image of the whole HDD (what I did)
You create an Image of the one Partition
I chose the first because i didnt want to put anything else on my micro SD, I cant confirm that the second way works but it is suppoes to so lets create the Image:
We make use of the Linux command dd, really, REALLY mke sure that you are executing from inside the VM since you can harm your HDD and dont forget the file extension....
First method:
Code:
dd if=/dev/sda of=/location/to/your/PC/HDD/imagefilename.img
The Second method (not confirmed):
Code:
dd if=/dev/sda1 of=/location/to/your/PC/HDD/imagefilename.img
where sda1 should be the partition you want to image...
This might take a loooooooong time
Now you have this Image, put your micro SD into an Adapter and put it into your PC.
Now find out the name of the SD, I used gparted and I found out that the name is sdc (could be sd + letter of alphabet)
Here the Ways split again:
The first Method completly overwrites anything that is on your microSD so make a backup, the second Way is just putting the created .img file onto the micro SD:
Method One:
Code:
dd if=/path/of/the/img/file of=/dev/sdc
Replace sdc with your micro SD letter, if you put in a wrong letter, you might overwrite your HDD so be careful, I am not responsible for what you do...
For me my Phone said, the micro SD is empty or has a wrong FIlesystem (its ext4) but you shouldnt care, we can mount it anyway...
Now copy the FIle mountscript.sh to the internal SD (the FIle is in this Posts Attachements)
Next open up a Terminal and type in:
Code:
cat /proc/partitions
You should get a list of all your Partitions, if you followed my Way, the last one should be your micro SD (look at the size) and called like mmcblk1p1
If you followed the Second Way, you dont need this Step...
Now type in the Terminal:
Code:
busybox sh /mnt/sdcard/mountscript.sh
the busybox in the beginning seemed required for me because our busybox is kinda strange...
You will be guide through a little setup, I hope it is selfexplaining...
When the script ran through successfully your terminal should look like [[email protected] /]#
In the next Post I will guide you through the Setup of the VNC Server
Any questions or something doesnt work? Just tell me
//Robert
Post reserved for VNC Tutorial
You can start by grabbing yourself this App...
Guess I forgot something
Added the mountscript as Attachemenet
did anybody try?
//Robert
this should fix network issues:
https://blog.tuinslak.org/socket-permission-denied
Hai Robbilie, After install with Ubuntu PC & turn off pc & All seem ok & at phone till [[email protected] /]# & open installed VNCwith name DLKS & 192.168.0.9 & port 5900 but cant handshake & also try many similar VNC still the same. Unlike our PC where on>boot>desktop shown & can play ? Pls advice. Thks.
i advice tiger vnc, but the console tells you the vnc server started?
btw its only 5900 when its on display 0 when its on display 1 its 5901 and so on...
the used display is shown in the console...
are you running the vnc from root?
How to run vnc from root? i only start separately,pls advice.Thks
if you have a vnc server installed in the chroot environment you need to run
vncserver -geometry 888x540
this is just to fit the phones resolution
I'm following your instructions for this. They are well written but I can't figure out the part about ssh and sshfs. What do you do for that step?
Is there seriously not an easier way such as opening the vdi image with some program and copying and pasting the files to my Windows desktop and then using something like IMGBurn to create an iso file and then convert it to an img file?
Ubuntu ?
Hello
I just see this old news when i would like to install Linux Mobile , any news about or link ?
http://www.firstpost.com/topic/prod...otorola-razr-i-video-9n_E6aapPSo-51417-1.html
Thanks
EDIT : http://sourceforge.net/projects/mpsdk/
Suddenly, I can't boot into Manjaro, so until I get time this weekend, I'm stuck on (Barf) Windows.
When I try to boot into my Linux side, it won't go past the Rog Strix splash screen and if I try and Ctrl-Alt-Del, it takes about a minute, then reboots, but if I let it sit, it just sits there for good.
So, I've never done a bot repair off an Install drive. Can anyone give me a quick run-down? Or should I try an earlier Kernel in the boot options screen?
To get you up and running try selecting one of the fallback kennels and see if you can get booted up that way
Boot repairs are not hard specifically but they are a little involved. Basically you'll boot up into a live USB of Manjaro. Then you'll mount your root partition (e.g. /dev/sda2) to /mnt. You'll then mount your boot partition (e.g. /dev/sda1) to /mint/boot. Once you have those two things mounted then you can use "manjaro-chroot /mnt /bin/bash" to get into your system. It will look and act just like of you had booted up into your install.
From there you can update or reinstall grub, look at your last boot logs, install/update software, fix config files, etc. For your case I'd go looking through logs and see what is happening and once you know that you can fix it. When I've had boot problems it was generally because I recently changed either /etc/default/grub or /etc/mkinitcpio.conf and I just need to rollback the change.
Another thing that could have happened is stupid windows had an update and during that update it messed with the boot partition, which is generally what happens during windows updates, and you just need to run an update-grub and that generally fixes the problem. That reason alone is why several years ago I stopped dual-booting and just use Linux exclusively and use Windows VMs if I need something from windows.
Good luck! Hopefully all that helps! Here's a link to the Manjaro steps. https://wiki.manjaro.org/index.php?title=GRUB/Restore_the_GRUB_Bootloader
ironLink21 said:
Boot repairs are not hard specifically but they are a little involved. Basically you'll boot up into a live USB of Manjaro. Then you'll mount your root partition (e.g. /dev/sda2) to /mnt. You'll then mount your boot partition (e.g. /dev/sda1) to /mint/boot. Once you have those two things mounted then you can use "manjaro-chroot /mnt /bin/bash" to get into your system. It will look and act just like of you had booted up into your install.
From there you can update or reinstall grub, look at your last boot logs, install/update software, fix config files, etc. For your case I'd go looking through logs and see what is happening and once you know that you can fix it. When I've had boot problems it was generally because I recently changed either /etc/default/grub or /etc/mkinitcpio.conf and I just need to rollback the change.
Another thing that could have happened is stupid windows had an update and during that update it messed with the boot partition, which is generally what happens during windows updates, and you just need to run an update-grub and that generally fixes the problem. That reason alone is why several years ago I stopped dual-booting and just use Linux exclusively and use Windows VMs if I need something from windows.
Good luck! Hopefully all that helps! Here's a link to the Manjaro steps. https://wiki.manjaro.org/index.php?title=GRUB/Restore_the_GRUB_Bootloader
Click to expand...
Click to collapse
Windows did do an upgrade - a crappy one at that. I need to get out of the WIndows Eval program now that I stay on Linux 99% of the time