Backing up the ROM Wiza200 - mtty1.42 or romupdate no good! - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello,
(I just updated the Wiki on how to backup the ROM from a Wiza200 device, seems the procedure listed there (using mtty1.42 or romupdate) does not work on the Wiza200.)
Background:
After succesfully connecting with the Wizard via USB, I give the following command in the terminal window:
"d2s 80000000 02000000"
.. this does not give any output allas but Cmd>..
Does anybody have a good method of backing up before going for ROM upgrades? ;-)
Let me know, I promise to update the Wiki with the new info when it becomes available.
Regards,
Chrisdus

I backed up my Qtek 9100 using the aWizard utility from the FTP site -- it produces a set of .nba files.

Related

thanks for all the hard work, please help me with my 8125

hello there, i have been a member of this board for a little while, but never posted, here goes. i have a cing 8125 and do not know what i am doing wrong updating the rom. got it right when it released in cali with rom 1.??. tried using Lokiwiz 02a, 02b, plain, ect. every time the dos screen just dissapears, no reboot, nothing on the phone. i have been able to update to submitters 2.17. at least it changed a few things. got the new comm manager screen, icons in different places on today screen, ect. however, no updated themes or ringtones ever. i have tried 2.17, the latest 3 in 1 installer, the 2.25 update from cingular and htc. i AM able to change the os number on the boot screen. i have even paid and downloaded an unlocker program from some uk company, but it wants me to select a key file which i do not possess. i think my problem is that it is not unlocked. just today i downgraded to 1.8.11.1 and tried to use lokiwiz and lokiwiz02b. same deal, screen just dissapears. no listing of an unlock number. :?: i am now confused.... also, never have had a rom implant a2dp but have been able to send it manually and it works fine. any help would be greatly appriciated. i have tried lokiwiz with/without sim, with/without mem card. is there somethin that i am missing??
Easiest way to do this is to extract lokiwiz to the root of your hard drive ie c:\
Copy enablerapi.cab to your device and run it from there.
Open a Dos windows <Start> <Run> type "cmd" without the quotes.
You will have a black box now on your screen. Type "cd\" again without the quotes and <enter>
type "lokiwiz" without the quotes and <Enter>
Now Unlock and CID Unlock.
You'll now be able to see the status as you do this.
Your phone will soft reset after each action.
Any more questions, ask
btw, the original Lokiwiz thread is http://forum.xda-developers.com/viewtopic.php?t=33796 and faria's tutorial is http://forum.xda-developers.com/viewtopic.php?t=47848.
Good luck!
thanks steve
thanks for the insight. i wanted to ask one question really quick. after doing the procedure that way everything appears correct except my phone never re booted. i get this screen
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Jonathan>cd\
C:\>lokiwiz
'lokiwiz' is not recognized as an internal or external command,
operable program or batch file.
C:\>cd\lokiwiz
The system cannot find the path specified.
C:\>cd\
C:\>lokiwiz
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: u
Unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
C:\>lokiwiz
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: c
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
C:\>
is this correct?? cannot find file?? i guess maybe if it actually is already unlocked and i run the program it wont reboot? thanks again :?:
OK. The "The system cannot find the path specified." message says it all. You're NOT unlocked as the unlock program can't run.
Download the program. Extract it to c:\ (Download Winzip if you're confused ... www.winzip.com )
Until you can get past the "path not found" you're not going to work. It really shouldn't be that difficult.
Post you results after you try this please.
Good luck!
THANK YOU
somehow it worked. could be one of a few things i was doing wrong. before i was just executing the .bat file. also was not extracting the entire file to the root of c. i was just copying the bat file to c. could it be that this time i left the sim card in??? thanks.. the odd thing is that i COULD switch around some rom versions including 1.5.4.2 WWE and the latest cingular 2.25 update with no problems, just didnt get all the benifits of all the cooked roms you great people have to offer. let you know how it goes.. thanks again
just wanted to add another note... which rom in your opinion is the most stabe, fastest one out??? the 2.25 from htc and cingular sucks bad. lots of hangups, programs locking up, ect. do not recommend it at all. except decent signal strength... later
I personally like and am using the T-Mobile ROM 2.26 Molski cleaned up Custom T-Mobile 2.26 Rom (Dutch and WWE)
Search for (if you don't have) and install the Cingular Connection cab and you're set to go!

Update Rom Radio

Hi, I have an hw6515 with a corrupted original Rom (0.92) and that it is imposible to upgrade via USB using the Huu rom upgrade application from HP. Then I´ve tried many things and discover that I can upgrade an entire image. I tried a hw6515c image, bigrom, Ipaqdisk from file farmer and everything works. Except my radio rom that is not recognized when I use the HP asset application.
So, how can I upgrade the original NBF files from HP not using activesync connection and not using HUU rom update utility from HP? How can I use the Romupdate utility (mtty) to update only Rom radio OS and Radio File system? Is there any command in DOS, Windows or Linux. How can I map the entire rom?
this cant be done with a corrupted rom i think the only thing can you do is reboot the device in bootloader mode and try it
enjoy it!!!!
***nEuEzIeL***
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
ok!!
tk3w said:
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
Click to expand...
Click to collapse
Tell me how can you change your language ??(becouse i know this cant be done )
try it with th same language of your device
enjoy it
***nEuEzIeL***
Yes, the change of language dont can be done.
but I did not know it and I have forced the flashing with an crakked program.
The flashing is go bad and now I have no image of old device.
The reflashing of the rom with upgrade of HP fail at %1 and the only way for to return at the old operative system is the restore the OS from the SD.
Please, can you share a backup of 6515d (english ) ?
Tank.
ups
no i dont have the 6515d i have the 6515b and your device are bricked you need to send to hp for a warranty or mailme to [email protected] and the topic need 6515 im from mexico and you can send me your device if you want but your device are briked
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
dim920 said:
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
Click to expand...
Click to collapse
Is better Honestly buy a new Morher Card or a New Device SEll That in a Spare pices
Hi, dim920.
I would be pleasing you of to receive material and informations about.
My email is [email protected] but you can share your package of tools also
elsewhere on the web.
Tank
Radio package 6515
For download my package with :
- Radiodump (adress 60000000 800000)
- Special hpruu for incorrect device sku or other error messages
- Beetles Radio Patch
- Bigrom
- Ntrw to write to sd
- Romupdate & mtty
- usb monitor trial
- winhex trial
- Hx 4700 bootloader to modify the header
- At command guide
go here : http://dl.free.fr/TOErXwWr/package6515rom.rar
THE Bootloader PASSWORD level 0 is : "BOOTLOADER"
the level 1 (pass1) is 0000000000000000 (zero x 16)
I exclude all official Hp rom package,
my device is french and a 6515a.
For change Your phone language,
Download special rom & read here :
http://mobilitytoday.com/forum/showthread.php?t=12231
I post in few moments all an short description of what i do
,what i think and what are the solutions for the same problem
on other device.
I try to regroup all i have for tomorrow night if you want to
speak before and have msn :
[email protected]
Tank you for your share.
I am trying to flash the rom from sd card.
I have downloaded a rom image of 6515 and I must put it in the SD card.
After to backup the PDA over SD with romupdate.exe dowloaded from :
http://www.filefarmer.com/2/dmc8742
with d2s, I have put the card ( SD 512 MB ) into card reader and ran
ntrw ( hw6515_bigrom112.zip in the link above ) for write bigrom112.nb1
into SD, but something does not work!!! My SD is blank.
I have an image of rom : IPAQROM.img and I could also try to mount it on the SD but I know that I have to use IPAQDISK.
I have tried to find it for many days on the web but I have not found it!!!!
I think that the single way for to resolve the problem is to make the flash from the SD card.
Makes to know your news me.
The single way that we have to resolve the problem is to work together.
Excuse for my English
Hi.
- For the problem of Dead Radio, nos gsm, and asset info blank,
A Classic Rom dump doesn't take the radio Gsm part.
- Flashing Bigrom or RomDump of a working device can only help you
to have extended memory on External rom, or to change language.
- When you do d2s, Romupdate format the sd in a special format when writing your rom. After copy backuped rom to your pc and finish by copy the new Rom on Sd via Ntrw. Move the sd from pc to pda, Finish via hard reset (1/Power 2/joystick down 3/Reset stay 5 sec, you see bootloader lightly, unpress in good order
1/ Reset 2/ Others. You see bootloader HP v0.21.
After few seconds "press action buttons to flash"
It's normal that the sd is blank, because it's a special formatted via d2s
for the pda can boot so pda os & os pc ask you if you wat to format.
So you can't see the file writed by ntrw, but she is ready for flash, if you follow steps & the bootloader stuck in bootloader and don't propose to flash, it's a problem of rom compatibility.
- So the D2s command don't take the gsm part.
I think we have to specify the good adress range, it's why
the file radiorom in my package is a rom dump d2s 60000000 800000 of a working device. If i copy back on the working device, he says upgrade radio stack and ok so solution is not too far.
Try it but my device don't wan't to take back this rom, stucked on "calculate checksum" on the pda and nothing never happen. If i do checksum command it's ok, but if i do a checksum 60000000 800000 he stuck too on "cal checksum".
So i think we have to erase manually with erase command & wdata, but really not sure to not brick more the devices but it's how they can solve the problem on other device...
Can't access bootloader menu on my hp 6515
How can I access bootloader menu on my hp ipaq hw 6515?
I tried all combinations POWER + Joystick + Camera + Reset
I only get a screen with message: Serial - hp - v0.21
This was because a ROM update went wrong...
Thx,
shaker308
That screen you see with Serial -HP - v0.21 IS the bootloader screen. You need to then connect the ipaq to a computer and use a terminal software to access the bootloader menu
ok... I didn't know that was the bootloader screen. I'll try what you told me.
Thanks cluurk.
shaker308
iPAQDISK.exe
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
shaker308 said:
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
Click to expand...
Click to collapse
http://blogs.unbolt.net/media/blogs/brinley/iPAQDISK.zip
found it just now.. Trying to play around with a H6365.
ipaq hw6515 dead
hi,
please help restore my device(spanish movistar hp),
it doesn't recognize Radio GSM after upgrading to 1.29sp
Radio presente: Si
Version del firmware:
Version protocolo de la radio:
Version de Cargador de inicializacion:
Version del sistema de archivo de la Radio:
Version GDFS predefinida de la radio:
Numero IMEI:
anything i can do please?
i need radio rom file to restore from sd card

can't format extRom..

hi people...
i tried to install a wm5 and a wm6 rom in a qtek 9090 but i can't format and merge ExtRom... i tried to use the rom unlocker found in the a77ila wm5 rom pack but i have a lot of error during unlock.. and when i try to format this error will show: FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed!
i tried with xda-developer unlocker but an unable to find exe file will show..
and repart_doc still not work...
anyone can help me?
my device:
qtek 9090
SO WM2003SE ver. 4.21.1088 (Build 15045.2.6.0)
ROM : 1.40.04ITA
Radio: 1.12.00
Prot Ver: 1337.42
ExtRom ver: 1.40.153 ITA
tnx in advance... and sorry for my bad english
1. You cannot reformat extROM without unhiding and unlocking it first. Follow the procedure step by step. (remeber aboutsoft reset
2. Correct links to both tools as well as the procedure you can find on Wiki (http://wiki.xda-developers.com/index.php?pagename=Helmi - Installation)
3. Report effects.
3b. Your english is OK
here i am...
followed tutorial step by step...
1. installed the unlocker
2. launched unhide
3. soft reset
4. launched unlock
5. system displays a windows named debug showin ERROR: press OK
6.another system window named debug showin FL_IOCTL_BDTL_HW_PROTECTION press ok
7. another window saying a peripheral connected to system in not working press ok
8. a debug window saying extrom unlocked
9. soft reset
10. launched repart_doc
11. error window saying "FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" press ok
tried also without soft reset at point 9. same results..
i only see Ext_Rom in memory page of Setting but still remain full
------------------------------------------------------------------
Finally solved...
i don't know why but ita extrom can't be formatted...
so i used an escamotage... upgraded qtek9090 with this rom BA_TMNL_14200_119_11300_Ship
After used unlocker and repart_Doc and all goes on....
now go to upgrade to HELMI_BA_WM6_R0_Public
hiya
i cannot format my DOC too, i got the same error ,
i used TASK 28 under MTTY , but still i'm getting this error.
anyone can help with this problem ?
Hiya
I was searching XDA-DEVELOPERS website about 2 days to find a solution for this problem, I have an I-mate PDA2K, i used all EXTROM tools on this website like this:
1- Installed EXTROM_tools,
2- run UNHIDE ,
3- then run UNHIDE,
4- Soft Reset,
5- now i can see Extended_ROM on my file explorer, i can read it , and able to write on it ... copy paste ...
6- run REPART_DOC.exe on my device,
7- tried many sizes like 128kb, 1024, 2048, 512, 61000, .................
but on this step i always get the god damned FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed,
i finally used Task 28 under MTTY but nothing happened, still have this problem,
No Wayyyyyy ! No wayyyyyyyyyy to repart my DOC size, .... noooooooooooo wayyyyyyyyyyyyyyyy
anyone going to help me plzzzzzzzzzzz ?
try it in this order...
1. downgrade to 2003
2. in WM2003 unlock... unhide... softreset
3. then repart_doc...
4. then upgrade to WM5/WM6
PS:
@Borbor...
hmm... i cannot see any part on your post that you tried to UNLOCK the extrom.
mastermoon DID. you need to unlock it first in order to modify it.
unhiding it just simply makes it visible to filemanagers.
SilverSamurai said:
try it in this order...
1. downgrade to 2003
2. in WM2003 unlock... unhide... softreset
3. then repart_doc...
4. then upgrade to WM5/WM6
PS:
@Borbor...
hmm... i cannot see any part on your post that you tried to UNLOCK the extrom.
mastermoon DID. you need to unlock it first in order to modify it.
unhiding it just simply makes it visible to filemanagers.
Click to expand...
Click to collapse
Hiya
I'm not a braincracked one, I'm a computer software engineer and i write CNC machines programs, so i don't need to someone to teach me instructions !!!! i did all, but i got FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed. !
find me a good solution plz !
and i thought landmark's the only one who is bossy...
if you dont need instructions then what are you looking for in here??? duh!!!
you're both at the same level of intelligence... are we downgrading humans now?
P.S.
look at the end of the third post... that is solved.
Everybody is allowed to name themself software engineers nowadays?
Please people start behaving like grown up's we are no longer in kindergarten.
Please:
- listen to each other
- be prepared to be wrong
- try explaining your problem in another way
- but most of all don't try to solve your listening problems by yelling and cussing to each other.
TIA, Flar

Upgrade to Windows Mobile 6.x

Dear XDA Members,
I have now read the official Wiki five times, and I still haven't understood how to upgrade my BA to a Windows Mobile 6.
The Wiki "HTC Blueangel WM6 Home" links to a Wizard Style Wiki for this, however that link only returns a 404 Error. I also haven't found any information about this in the FAQ or orther threads. Maybe it's just me?
Where can I find a WM6 image for the BA (T Mobile MDA III)?
What software do I need to flash it via USB to the BA?
Thank you in advance.
Chris
Please refer to http://forum.xda-developers.com/showthread.php?t=630416
The instructions are there in Posts 1-6. Good luck.
Sunny
hi and welcome to the forum
as stated by sunny, my tutorial thread should cover all aspects of the upgrade process, including links to most of the recent roms.
the blueangel wiki suffered from the transfer to the new mediawiki project, which is why it should not be used for tutorials anymore.
Thank you both for your fast and helpful support.
I am running a non-english Windows Mobile 2003SE (GER) and executed the steps from your Guide to downgrade it to a WWE version. On xplode.tk I downloaded the latest T-Mobile UK Version and extracted the files mentioned in step 1b from the Temp folder while executing the .exe file. I also copied the files into the RUU folder.
When I open the task manager in step 6 i can only find and kill "wcescomm.exe"; "WCSEMgr.exe" isn't there. I am running WinXP SP3, logged in as administrator.
When I start Maupgradeut_noid anyway, I doesn't show me the rom versions.
Where am I going wrong?
Edit: I forgot to mention I have read the thread "Cant' Downgrade from Win2003 SE GER to ENG", but renaming the folder and then trying it didn't work for me either.
if you can't see those processes, you are probably not running activesync. install the latest version (a link can also be found in that thread in the 2nd post) and create a temporary partnership. just connect the device in normal running mode and set it to sync something small, like notes or favorites, after syncing go to the connection settings and untick "allow usb connections" then you should be fine and you can continue with the next step, connect in bootloader mode, make sure the display changes from serial to usb. at that point, a new driver will be installed and then running the ruu should get the upgrade process working, meaning, then there will be numbers in the 2nd window. if not, please post the RUU.log found in C:\
I have already installed ActiveSync 4.5.0.
I created a temporary partnership syncing favourites and after that unticked USB syncing in ActiveSync.
Then I connected in bootloader mode, making sure the display changed to USB V2.07. No new driver was installed, but I guess that already happened in my earlier attempts.
The HTCRUU.log (no RUU.log there) i found on C:\ contained a "Image Radio Checksum Error", so I downloaded another image from another mirror, but got the same problem.
Here is the log from the 2nd attempt:
11:50:02:843 [msg] : Config Info : [000000],[0],[0].
11:50:02:875 [err] : Image Radio Checksum Error.
11:50:02:875 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
____
I HAVE however been able to flash a WindowsMobile 6.5.3beta image to the device without formatting, so thank you for helping me with that!
I reverted back to Win2003SE, because I would still like to get the 60MB if possible.
ah, ok, apparently the radio rom is damaged and shows a crc error, since you are planning on downgrading and then upgrading, just delete the radio_.nbf from your update folder and try again.
no worries, obviously, you did nothing wrong, but there have been a lot of corrupted radio roms around lately, xplode's rom archive has them and so mine and d-two's have them as well.
in general, a first indicator for corrupted roms is the file size, a nk.nbf rom must always have 32,769kb (1kb more than 32mb) and a radio has 4,097kb (1kb more than 4mb)
you can ignore (delete) all radio roms in the process of upgrading, frankly, it has nothing to do with the operating system itself, it is just the bridge between the operating system and the hardware. if you are not running radio 1.15.00 yet, which is the latest and according to most users, the best version, you can upgrade it any time you want, so i'd suggest: try and upgrade to wm6.x first and then, when you got used to flashing, flash the radio, or, if you are satisfied with your phone's in-call sound quality, bluetooth and wi-fi performance, don't flash it at all.
Ah, ok.
I deleted the radio file and tried again. This time it showed me an ms_.nbf Checksum Error. I deleted that one as well and got this:
09:51:05:968 [msg] : Config Info : [000000],[0],[0].
09:51:05:968 [msg] : RadioFile Not Exist !
09:51:05:968 [msg] : MSystemFile Not Exist !
09:51:06:171 [err] : Image CE Checksum Error.
09:51:06:171 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
I also redownloaded the MaUpgradeUt_noID.exe right from your signature to ensure I didn't use an old one. Still the same problem.
My radio file DOES have 4,097kb; the nk.nbf has 32,769kb as well...I have to admit i'm still puzzled.
I also downloaded the two most recent radio files from your tutorial thread. Same problem: Checksum error. But I do not get a checksum error when I try to flash one of d-twos os-images.
i'm changing the radio roms, i will only provide radio 1.15.00 from now on, and i will post the entire package, as it came from htc (including the original RUU).
Thanks.
Where can I find them? Your tutorial thread seems untouched.
flash
hi WeissenbornC,
are you flashing with vista or win7??
if yes read please d-two´s tut for flashing with vista/win7.
http://forum.xda-developers.com/showthread.php?t=622768
hope it helps
cheers scudo
Hi scudo2709,
I am using Windows XP. Flashing a ROM is no problem, I have now had 5 different ROMs on my BA. However, I haven't been able to flash a shipped english rom (WM2003) in order to format the flash drive. I keep getting Checksum Errors with all of the ones I've been able to try so far.
Thank you for trying anyway.

[Q] X1i HardSPL Error 262

Hi,
I cannot flash 0.78.OliNex Hard-SPL on my new X1i: The progress bar stays at 0% until the timeout, then Error 262. I tried everything (no sd-card, no sim, hard reset, compability mode etc.), no avail.
My new X1i has the image version 1.05.932.7 (03/24/09), the bootloader reads:
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
The type is AAD-380001-BV.
Radio is 1.14.25.55, protocol 52.65.25.34J, extended protocol 1.0.11809.7229.
Software ID is 1213-6439, version R3AA007, user id 1215-3303, user version R15A, content version PA10.
I noticed that the installed WME 6.1 is modified compared to the old X1. In particular, during my first attempt, a WM6.1 warning message with a red boundary popped up, indicating that proceeding could harm the phone (yes/no). I checked yes, and since then, the message does not come up anymore. Probably the ROM is not in Olis compatibility list, so I looked for unsigned HardSPL, but found only the Image Version 1.00.Diamond, so I did not flash it (probably it would brick my X1i). Any idea would be very much welcomed, I want to get rid of WM6.1 and flash WM6.5.3.
Thanks a lot for any hints.
BTW, I've posted this thread alredy in the X1 General forum and realised only now that this forum might be a better choice, sorry for that.
Next try
Hi,
I found the recommendation below and tried, but no avail as well.
Does anyone know an unsigned HardSPL by Oli for the SE X1?
Any help appreciated.
_________________________________________
xidesu
3rd August 2010, 09:33 PM
Default HTC Touch Pro, Fuze HardSPL Error 262 FIX
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
don't flash bootloader-stuff from other devices, never! Oo
try flashing hardspl 0.72 via usb first (the old one), then flash 0.78 as an "update".
Next step, but still not working
Well, I was able to flash APP_SW_X1i_GENERIC_UK_1213-6450_CDF1215-1832_KOV_R1AA017
from the SD card, and I have now SPL0.72.0000 on my X1.
ROM Version:1.02.931.3
Date: 08/29/08
Radio: 1.06.25.29
Protocol: 52.43.25.24U
Software ID: 1213-6450
Version: R1AA017
However, X1_HardSPL still terminates with Error 262 as before. Flashing OliNex's HardSPL via SD card (RUU_Signed.nbh renamed to kovsimg.nbh) does not work either. I still cannot flash my Dynamics GTX 2.3.5 GER ROM.
Any ideas?
BTW, I tried with a desktop and a laptop, both XP SP3 and Active Sync 4.5 on various USB ports. I disabled Security Options via X1_Tweaks. Everything seems to work, only flashing HardSPL still fails.
At least, I am a step back now ;-)
Bingo!
I succeeded. The solution has been:
- Establish an Active Sync connection via USB.
- Copy the file Xperia-SSPL-Manual.exe to the root directory of a FAT32-formatted SD card (no SDHC, an elder one). SSPL-Manual is the basic part of OliNex bootloader.
- Unpack HardSPL by starting it or use RUU_Kovsky files in a directory of the PC hard disk. Make sure that the proper RUU_Signed.nbh file is in this directory (the HardSPL image by Olimex in the version you whish to complete the basic SPL started onthe X1)..
- On the X1, open the file manager and start Xperia-SSPL-Manual.exe by clicking on it. The X1 switches to the boot loader mode indicating HardSPL 0.52 by OliNex.
- On the PC connected to the X1, start ROMUpdateUtility.exe.
In my case, the flashing went very quickly to 100%, and I have now HardSPL0.78OliNex on my X1. Now I can proceed (Task29, image flashing). At least I hope so.
My assumption about the the problems I faced: My X1 had a quite recent firmware which probably blocked any change of the SPL and allowed only generic signed images to be flashed, no cooked ones. Xperia-SSPL-Manual.exe bypasses this lock by applying an OliNex cracked routine, thus allowing to overwrite the SPL. At least I think so.
Done.
My Dynamics GTX 2.3.5 GER ROM is now up and running. THX a lot for the great support of this forum!
Thanks for instructions I have same problem with my X1.
You're welcome.
It has been worth the troubles - the Dynamics ROM is great, and until now, I found no hickups.

Categories

Resources