Hey guys, I have an Orange SPV M3000 with an AZERTY keyboard. but I've flashed it with a Qtek 9100 ROM. Obviously, the keyboard in Qtek ROM is qwerty. Can someone post here a CAB file for azerty keyboard, cause this way it would be much easier for me, as I wouldn't bother remembering that when i want to write "w" i have to press "q" and so on.
Thanks
dimushor, please search the forum before ask something. this topic has been discused many times. however, here's the solution: create new string value called Locale in \HKCU\ControlPanel\Keybd with value of 040C. that's it! you'll have AZERTY layout.
zoki said:
dimushor, please search the forum before ask something. this topic has been discused many times. however, here's the solution: create new string value called Locale in \HKCU\ControlPanel\Keybd with value of 040C. that's it! you'll have AZERTY layout.
Click to expand...
Click to collapse
I would have searched the foru, but i did not know how to formulate this search. Thanks anyway
zoki said:
dimushor, please search the forum before ask something. this topic has been discused many times. however, here's the solution: create new string value called Locale in \HKCU\ControlPanel\Keybd with value of 040C. that's it! you'll have AZERTY layout.
Click to expand...
Click to collapse
it doesn't work :x
did you soft reset after making the change? If you didn't.. dur
did you wait a while before performing that soft reset ? (easily checked by checking that registry value - if it's back to the original, you didn't wait (long enough))
for further information:
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
( note that "1036" in decimal is the same as "040C" in hexadecimal )
thanks, i managed to do that, thanx to zoki
ZeBoxx said:
did you soft reset after making the change? If you didn't.. dur
did you wait a while before performing that soft reset ? (easily checked by checking that registry value - if it's back to the original, you didn't wait (long enough))
for further information:
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
( note that "1036" in decimal is the same as "040C" in hexadecimal )
Click to expand...
Click to collapse
This does NOT work on my 9100 with the 2.24a Mr. Clean ROM. The value is getting written into the registry but the keyboard layout does not change.
/politby
it works with Mr. Clean's ROM. don't forget: do not soft reset with the stylus. soft reset it with a program.
Related
Hello,
thanks a lot for the tools and the help here in the forum!
Great Work!
With your help i updated my Vodafone Germany VPA Compact II (Wizard) to the english Rom with the enhanced Bluetooth functions etc.
Can anyone tell me if i can get the german keyboard layout back to my device?
Thanks a lot for your help!
Hi,
i find a few things about, i downloaded the Total Commander and changes the Settings in HKCU/ControlPanel/Keybd
There i made a new string with the name locale and 0407 for German
After Closing the app and restart with soft reset for more than 5 sec the new changes dontßt apply???
#
VPAcII said:
"With your help i updated my Vodafone Germany VPA Compact II (Wizard) to the english Rom with the enhanced Bluetooth functions etc."
#
Sorry to jump in with an unrelated question but I was wondering if you could point me to the link(s) that will help me better to understand how to change my VPA Compact II to English. I have a few tools which I got here and I am really not sure if I am going to do some damage or not and thought I would ask. Your post is the only one that directly refers to this VPA and any help would be greatly appreciated.
So far I will:
1. Change some settings with the hex editor?
2. Load ROM: K-JAM_WWE_1010903_106_10110_ship.exe onto the storage card?
3. Reset the device?
4. Drink a beer & try again?
Please notice that they are all questions as I am unsure of the exact process for the whole ordeal.
Thanks and have a great day,
ITTIA
Click to expand...
Click to collapse
VPAcII said:
Can anyone tell me if i can get the german keyboard layout back to my device?
Click to expand...
Click to collapse
VPAcII said:
See if this post will help with the keyboard issue:
http://forum.xda-developers.com/viewtopic.php?t=35056&start=0
Have a great day,
ITTIA
Click to expand...
Click to collapse
VPAcII said:
Hi,
i find a few things about, i downloaded the Total Commander and changes the Settings in HKCU/ControlPanel/Keybd
There i made a new string with the name locale and 0407 for German
After Closing the app and restart with soft reset for more than 5 sec the new changes dontßt apply???
Click to expand...
Click to collapse
After changing the locale code don't SoftReset device, you should turn Power Off and On.
Anybody know what the locale number is for the US keyboard layout?
Thanks!
Cheers...
For those who would like to know: US layout = 409.
Cheers!
If you don't want to edit the registry manually try using Registry Wizard. It's available for download in the regular Wizard forum and has an option for keyboard layout.
Hi guys - I flashed my German Vodafone VPA compact II with the new Qtek ROM (incl.AKU2) 2.17.7.2 WWE. I love it, it works perfect - but there is only one problem : how can I change to the German keyboard layout (QWERTZ; the symbol layout (reachable with the red key) is also completely different from the US one !) ???
I already tried to modify the registry keys (HKCU/keyboard layout and HKCU/Control panel/keybd) but without any effect - the device stays with US keyboard layout !
Can somebody help me ??
Thanx
Joe
same problem here
the often posted reg edits don't seem to work on new rom.
please help
Regards,
Andreas
ah well.. wait for the new German ROM then I guess
/me hates on localization some
Keyboard layout
The issue is, that I will have the operating system all in english, but change only the locale for the German keyboard mapping ! Is it not possible to extract the ROM, patch the keybord table and then flash it back ?? I guess that they have removed the other mappings due to size problems and thats the reason why the reg settings don't work :?
Joe
I hope it is possible to change with some registry edits
OK, after reading more carefully all the other postings, finally I got it !
How to make it :
Insert a new key(MUST be string type NOT Dword !!) 'Locale' under HKCU/ControlPanel/Keybd. The value is then '0407' (this is for a German keyboard layout). After that do a soft reboot (switching device off/on with the power on/off switch) - works great. The only thing that remains unsolved, is the ability of typing 'umlaut'; i.e. [a]+[red key]+[space bar] should give 'ä' but results in 'à'.
When somebody has also a solution for this, let us now
Joe
the Umlaute are stated in the sym.txt in your windows folde. Just edit 'em or use my language pack for there are more "bugs" for Germans using english ROMs (e.g. Transcriber, autocomple,..)
look here: http://forum.xda-developers.com/viewtopic.php?t=43680&highlight=german+language
Hades.
Hades77 said:
the Umlaute are stated in the sym.txt in your windows folde.
Click to expand...
Click to collapse
Good one - I'll add that to the language changing WiKi.
Hi,
I just installed a german ROM on my english TyTN II, so the hardware keyboard is set to german. I've only found cabs to switch from english to german but not the other way...
I also found that:
changing HKLM|Hardware|DeviceMap|Keybd > CurLang to your CountryID
Click to expand...
Click to collapse
But in my registry there is no 'CurLang'-value at that path.
Have I to set value by my self, or is there an other way to switch the layout back?
Maybe someone got an ideae
Greetings Oli
P.S.: I use the "M-Diamond v1.4 Full with SqlCE Mobile 3.5" (WM 6.1) ROM
Hi, welcome to XDA !
This topic has be adressed already. Addtionnaly, it is recommended to post in the thread of your ROM, as this problem could ROM specific .
If you do not have CurLang, you could try to create it (DWORD) and set the Hexadecimal value to 407 (which is the value for German layout).
Then soft reset, worth the try . If it's still not working, try searching around, you may find quickly what you want!
Yea I've been studying the keyboard related posts here before I posted the message. I only found topics that dealt with us-layout->other-layout problems and for that, there are many fixes around.
But right now I found a workaround witch worked in that post.
THIS IS NOT A TILT KEYBOARD FIX SOLUTION but a workaround for people having an original TYTN II with QWERTY hw keyboard and ROM in a differnet language. Below sample is for a German ROM flashed into a US original KAIS130:
There are few registry entries you have to change.
First set:
[HKCU\MUI]
CurLang = 1033 (or HEX 0x409) - IMPORTANT, set this first!!!
Then go to
[HKLM\System\CurrentControlSet\Control\Layouts]
and - to be on the save side - go through all SUB KEYS and set all "00000407" values to "00000409" (Do not rename the keys themself!)
there is still one SUBKEY which has your language written as a string:
[HKLM\System\CurrentControlSet\Control\Layouts\0000 0407]
"Layout Text" = "German"
Change the above entry to "US", soft reset your device - done!
- - -
Just keep in mind: above sample is for a German ROM (407) - if you flashed a different language to an english device, then the "407" will be something corresponding to your language.
Click to expand...
Click to collapse
Greetings Oli
I have put in radio software:1.65.17.56
I have norwegian wm6.1 on the tytn2.
(QWERTY keyboard) What is wrong?
Thanks
You'll need to add more details than that. The buttons don't work at all? Some work/some don't? They all work but don't type the same characters as shown on the buttons?
If it's a Norwegian 6.1 rom from someone on these forums then ask the question in their thread. If not add more details to your post here.
All of the Fn keys does don't type the same characters as shown
on the buttons.
WM 6.1 have i downloaded from htc.com
You changed the "Regional Settings" to Norwegian?
Moved as not ROM Development in my thread F.A.Q is 2 ways to change hardware keyboard to another layout worth a ganda.
Regional settings is in norwegian...
What is the original radio software that comes with the norwegian kaiser?
Open registry editor and change that keys :
HKLM/Hardware/device map/keybd/CurLang change value to 1044
if key not exist go there :
HKCU/MUI/CurLang and change value to 1044.
I must always do this after HR or change ROM.
Reboot, and all will be ok
I did not find it... Where???
sethro said:
I did not find it... Where???
Click to expand...
Click to collapse
What didn't you find ? Please be more precise you have been handed 2 x REG keys one of which may not be there as it depends on ROM, i did point to my thread F.A.Q to which holds same information.
Hey guys,
today I updated my x1 with the "826x Series ** WM 6.5.3 build [21682] - Sense 2019 (18/10/2010)" ROM. The rom is brilliant, but i still have one problem. My qwertz keypad was converted to a qwerty pad, so if i type "z" my phone writes a "y" and vice versa. Is there a chance to change it in this Rom?
Thanks for help
you can solve this problem.
try this:
registry
HKLM\HARDWARE\DEVICEMAP\KEYBD\
"CurLang"="407" (HEX) <--(german is 0407 country code!)
you need a registry editor to change this value
softreset and it should work
great it worked. Thanks..
is it even possible to write "ä,ö,ü,ß"?
sorry, my mistakt.. its competly working
syre said:
you can solve this problem.
try this:
registry
HKLM\HARDWARE\DEVICEMAP\KEYBD\
"CurLang"="407" (HEX) <--(german is 0407 country code!)
you need a registry editor to change this value
softreset and it should work
Click to expand...
Click to collapse
where i can get this editor ?
thx
CooSee ' Ya
EDIT: sorry for being so noobish ! i found it !!!