Related
Hello all. I have successfully installed BB Connect 4.0.84 on my Kaiser and it is up and running...both my BES and BIS accounts. Fairly smooth.
Question - whenever I suff the Internet or update my RSS feeds with Insight, it kicks the BB Connect "off" (disconnects) and uses MediaNet. Then I have to go in and "force" BB Connect back on. A bit of a PITA. I have an unlimited BES plan from AT&T...do I need to set the Connection types to be something else now for these other programs that need to access the Internet?
Any help you could provide with you greatly appreciated.
Thanks!,
Adam
yes go into the connection settings. then go to advanced and select networks and set both to My Isp or which ever one your BES\BIS connects to.
There is a new one now (not just MediaNet) tha is called "My Blackberry" but when I select that one none of the other Apps connect to the internet. Once when I select MediaNet do they connect. They actualyl disconnect the BBerry,connect themselves, and then a bit later the BBerry appears to re-connect on its own....so this may work out to be ok.
Thanks - much appreciated.
welp sorry to say bud thats how that is going to work then... BES must use its own network settings and the MediaNet for internet uses another sorry your stuck unless entering in the settings for wap.cingular by hand and not using MediaNet work for BBC
I too have BB Connect installed on my Kaiser. I am able to get emails successfully over Blackberry and gmail. However, I cannot use Internet explorer over MediaNet. GoogleMaps, the weather plugin, QuickGPS, etc can all get the data they need when connected through MediaNET but IE will not load any webpages.
Any thoughts on how to fix this? There are no options to config connections within IE and the connection within settings seems to be correct (how else would the other applications be able to use MediaNET?).
Note:
I can launch BIS for internet explorer and use the Blackberry connection instead of MediaNET. Obviously though this is not optimal as BIS has lmited sites, low res pictures, etc.
This is not really in the right forum. THere are a couple of BBC threads in the other Kaiser forum that address your question directly. Go there and search for blackberry. You'll find them.
issue kaiser w/ bbconnect
Hello,
I have a kaiser and the bbconnect installed on it but when I want to activate it, all my today plugins disappear and I can't find them in the today setup anymore.
Does anyone have an idea?
I'm in France but I don't think the issue comes from that.
I need it for my job and at the moment i'm totally held so please help me if you can.
Thanks in advance
Just got my Tilt last week, and of course had to upgrade to PDA Personal Max plan (had been using MediaMax successfully with my Wizard). But I figured the increased cost was worth it, and that also I'd be able to access isp.cingular (which I had used before when I was on PDAunlimited plan)
Couldn't access ISP at first, so I called tech support. Very nice lady said "You were on MediaMax, now you've upgraded to PDA Personal Max but they haven't turned ISP on - I will do that for you". She did, it worked, no problem at first. Download speed reported by DSLReports was in 600's, vs. 400-500 when on WAP (on Denver's very recently activated 3G).
Then 2 days ago it quit working. I called - first guy couldn't understand what I wanted, kept trying to step me through configuration in Connections for WAP - I said I've already got that going, with and without proxy, no problem. So he says "Then what's your problem?" I say I'm paying for it, I should be able to access ISP, please be sure it's turned on. He doesn't seem to have a clue as to how to do this, or why I would want to. Call ended in frustration.
Next guy I talked to said "ISP is only for tethered plans". I said, "Oh, really, then what am I paying extra for my plan vs. MediaMax?" and he gives me the song and dance about how MediaMax is for Smartphones and PDA Max is for PDA's. I said I didn't think he knew what he was talking about and hung up.
So, what is the real deal? Shouldn't I be able to access ISP?
Would like to hear other's experiences - especially if successfully using ISP and not on tethered plan.
Hey I went through the same exact issue with AT&T about this isp vs wap. Reading all the talk about how isp was better I had my phone upgraded to it. Everything was working fine until around the time I got 3g service upgraded to my area. I noticed I could not connect anymore so i went back to the old wap settings and everything went through. I do not think it is because of 3g that I can't access isp anymore it's just the timeframe in which it happened. Anyway now when you call AT&T it is almost like they got brainwashed into thinking that isp is only for tethering plans. Even though I tell them I had this configured to my account before it literally seems like that they had that memory wiped out from their recolection. Anyways I guess I am not too upset since 3g was upgraded to the area however having access to isp and ispda would be really great. If anyone is lucky enough to devise a way to get this feature added to their 39.99 plan that would be awesome. However like cushcalc said earlier and like what I have gone through it seems that now isp is now tied to tethered $59.99 plans instead.
Also I wanted to add 1 thing to this. All reps swear that this does nothing to increase your speed however they have now become so resistant to even add this feature now to $39.99. So if it's really the same thing why all the hassle to give people what they want?
It takes time to talk to the RIGHT rep.
Don't worry, i went through the same thing. Until i spoke with a lady and told her that "my wap settings works correctly, but i don't want to connect it using wap.cingular anymore, i want to be able to connect to isp.cingular." She did go on mention about the tethering and blah blah blah. And i told her "im not tethering, i need isp.cingular because it assigns an IP ADDRESS to my phone so i can access my computer remotely when im away from the office from my PPC Phone." In conclusion, she did some research and it seems like there's two different $39.99 pda unlimited plans. So i told her i want the pda unlimited plan that has isp.cingular support and for $39.99. So in conclusion, i guess the rep needs to know the difference of the two. Not sure if this helps, but that's how i got my isp.cingular to for for unlimited us at $39.99 a month.
Ok, i just got my tilt a few days ago, it's my first pda/smart phone, what ever. Whats does all this mean and how do i check which i have. i'm on a 39.99 data plan.
I've tried accessing isp.cingular many times.
Always fails.
After reading this post I decided to give them a call seeing as I have the 39.99 PDA Plan.
Well after getting transferred a couple times, the guy told me my phone was provisioned to access either of the APN's, wap.cingular or isp.cingular.
I think I will keep calling back every day until I get someone that knows wtf they are talking about.
I need to be able to access my work VPN, and have to have a static IP
I've been back and forth with AT&T on this. I'm also in Colorado (but Colorado Springs, not Denver) and we just got 3g as well.
I called about needing isp.cingular to access my home VPN. The first rep told me I had to get the $79.99 tethering plan. I said no thanks. I called again the next day and got a rep who knew actually knew what she was talking about.
She said that feature could be added to my account for $3 a month. I agreed, she made the changes, and I hung up the phone happy. I rebooted the phone (her instructions) and tried to make a connection to isp.cingular. No go. Same error message I always get.
Can someone on this thread verify the connection settings?? This is what I have:
Access Point
ISP.CINGULAR
Username
[email protected]
Password
CINGULAR1
I haven't tried calling back yet, but maybe I will tonight.
PDA Connect can connect to isp.cingular. PDA Personal Max cannot. You need to have them change your plan to PDA Connect and you'll be able to access isp.cingular again.
Someone who can connect to ISP, go into your wireless account screen and get the Plan name. Mine is: PDAPERUNL1500MSG and I can't connect to ISP.
here is the weird part, when I activated my phone and called in for it, the rep told me the PDA plans were EXACTLY the same, same cost, everything else the same, except one included 1500 messages. I made him repeat it and said "So there is NO difference whatsoever except one has 1500 messages included?" He said Yes, so I went with it. But I'm willing to bet, the one w/o 1500 messages allows you to connect to ISP.
Ugghh...
Read my post above yours again. That's exactly what I'm saying. I currently have a tethering plan, but I used to have PDA Connect Unlimited and could use isp.cingular also.
You CANNOT use isp.cingular with the PDA Personal plans.
URPREY said:
You CANNOT use isp.cingular with the PDA Personal plans.
Click to expand...
Click to collapse
Then why did the AT&T rep tell me I could, but it would cost me an additional $3 a month?? (see attached pic)
Flapjack said:
Then why did the AT&T rep tell me I could, but it would cost me an additional $3 a month?? (see attached pic)
Click to expand...
Click to collapse
Did it work? Just because a front-line support person tells you something doesn't make it true.
Flapjack said:
I called about needing isp.cingular to access my home VPN.
Click to expand...
Click to collapse
I'm on the media max plan and VPN just fine.
I've personally done both IPSEC and PPTP vpn on wap.cingular
DLD
URPREY said:
Did it work? Just because a front-line support person tells you something doesn't make it true.
Click to expand...
Click to collapse
Obviously, I have to follow-up. The charge is there, for "static IP", which is promising. I will call tomorrow if I have time.
RacerX10 said:
I'm on the media max plan and VPN just fine.
I've personally done both IPSEC and PPTP vpn on wap.cingular
Click to expand...
Click to collapse
I can't seem to make it work! I can connect from another network w/o issues, I just can't from my phone. The only place I see to add the VPN connection is under my "Work" network settings....
If someone would enlighten this OLD dog, I would like to see if my TiLt will connect with the isp.cingular.com
Only problem and reply I can use would be to tell me how and where to adjust the settings.
Be kind.....newb at play with my new toy!
Try this
Try and call them and ask them to set you up on this one "PDACnctUntlAdd" that is the exact name i got when i went to the features page on my at&t account online. And it's only for $39.99 and my isp.cingular works perfectly with 3g connections.
Out of curiosity I tried changing my Tilts MEdia Net settings to go to isp rather then wap, and couldn't make a connection.
Portland Oregon Area, with the 39.99 PDA Personal w/ 1500txt
I get 500-900 on the 3G out here, 80-150ish on EDGE, and around 1.6mbps on my wifi connection through my cable internet. No complaints!
Would like to know what kind of a change this would make though, other then the IP assignment.
Bubbacs
In your Settings / Connections / Connections screen, click "manage existing" and then edit Media Net. First screen is to change name, 2nd screen is to assign wap or isp.
I may be reitterating some information here, but I can tell you as a fact, APN isp.cingular is being reserved for either PDA Connect Unlimited, or a Data Connect plan. If you are any of the PDA Personal plans, access to isp.cingular WILL BE TURNED OFF. There are however, a VERY small number of users that (by shear luck) didn't have isp.cingular turned off when they changed from PDA Connect Unlimited to PDA Personal Max.
My advise is.. if you can't get isp.cingular to work, quit beating your head over it and change your plan to PDA Connect, or get a laptop card plan like I did.
I did a long research thread on this at the at&t forums. I cannot access that site anymore, but maybe someone else could dig up a link.
GWelker62 said:
I may be reitterating some information here, but I can tell you as a fact, APN isp.cingular is being reserved for either PDA Connect Unlimited, or a Data Connect plan. If you are any of the PDA Personal plans, access to isp.cingular WILL BE TURNED OFF. There are however, a VERY small number of users that (by shear luck) didn't have isp.cingular turned off when they changed from PDA Connect Unlimited to PDA Personal Max.
My advise is.. if you can't get isp.cingular to work, quit beating your head over it and change your plan to PDA Connect, or get a laptop card plan like I did.
I did a long research thread on this at the at&t forums. I cannot access that site anymore, but maybe someone else could dig up a link.
Click to expand...
Click to collapse
Is this the correct one G? http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=49092#M49092
OK, isp.cingular and a real ISP has been discussed quite a bit in the past, especially after the new rom came out and the PDA Personal Max data plan. And this is when the trouble started. Many users lost the ability to use a real ISP and some didn't. Some of the fixes posted worked for some and others it didn't.
For me none of the fixes worked but using APN wap.cingular really did what I needed, so I decided to leave it alone. After I decided to upgrade my data plan to Data Connect, I now NEED to use isp.cingular. I cannot log in my company's VPN unless I use APN isp.cingular. So I was bound and determined to make it work. After much reconnaissance I found all the answers right here on the at&t forums. But there are many pieces to the puzzle and they were spread out all over the place. This is going to be an attempt to put the pieces all in one place so the picture will come together.
Update 05/06/07 1:40pm
I put this information together with the assumption of readers having some working knowledge of Windows Mobile 5 and mobile phone usage. If you are a complete NOOB to the whole WM5 thing this information will create more questions than answers. I am far from being a tech guru and if I can half learn this stuff with both my brain cells, then most other people can too. But still..... noobs enter at your own risk.
The Connection Profiles
Now, the new rom sets up the two network connections, "My ISP" and "Media Net". Refer to here Browser/internet Settings There is a link in that page also for configure and use the My ISP profile. For the MEdia Net connections follow the instructions to the letter. Now the My ISP instructions differ from what the new rom sets up automatically. (and if you call CS the data guys will walk you through those settings in that link) The new rom will have the settings for a "real ISP" connection. You will notice, if you follow those instructions it has you change a couple of things. For one it has you change the APN isp.cingular to wap.cingular. Well this won't give you a "real ISP" connection but it will make the My ISP profile work for web browsing. I did a survey of users on who had "My ISP" working and the ones that answered yes, I bet they were still using wap.cingular in the MY ISP profile. So they were/are not getting a real ISP connection. I will quote from that settings page and maybe it will give you clue on it's purpose for using wap.cingular in the My ISP connection profile:
# Additional features such as Wi-f and device based e-mail along with other 3rd party applications may not be compatible with the proxy settings associated with the MEdia Net profile.
# If there are connection issues with e-mail and/or Wi-Fi, configuring and using the My ISP profile as displayed below may resolve connectivity issues.
# Configuring the AT&T 8525 to use My ISP will disable MEdia Net (WAP) web pages when My ISP is used for connectivity. However, regular Internet (HTML) web page browsing will function as normal.
Now the best I can figure, all this does is give two profiles and both use APN wap.cingular, but one uses a proxy server and one doesn't. Which brings me to my next category.
The Proxy Manager cabs
There are two cab files in a folder called Proxy Manager, under your programs menu. These two cab files enable and disable the proxy settings via a registry edit. Now, to me, if I continue to use the MEdia Net connection for all internet use, and utilize these cab files to disable and enable the proxy, I am doing the same thing as above by setting up those two network connections and swapping back and forth from them. Now once you have the My ISP connection profile set up with "real isp" settings it will be no longer necessary to use these cab files. All you have to do is switch back and forth from MEdia Net and My ISP. The MEdia Net profile has the proxy settings built in and you will have to use it if you want access to the Media Net home page.
http://home or http://device.home
Now on to the next topic....
How Do I Get A "Real ISP" To Work?
After it is all said and done, the bottom line is you have to be on the right data plan. From what I have learn't, you have be on a PDA Connect Unlimited, or a Data Connect Unlimited before your account is provisioned to access through isp.cingular. There are a lucky few that when they switched to PDA Personal Max, isp.cingular was not turned off (lucky dogs who's names we shall not speak ). But if it is turned off, CS will NOT turn it back on untill you get on the right data plan and that is the FIRST step. PERIOD Once you do have the right data plan and isp.cingular is "turned on" then it is as simple as setting up My ISP with the "real isp" settings. And thats it! For a recap of those settings refer to RonAnnArbor's post here. You can consider this post a supplement to Ron's.
Something About PIE
Now lets assume you got on the right data plan and isp.cingular is provisioned, and the My ISP profile is set up to use the "real isp" settings but it DOESN'T WORK! You pull up PIE to view a web page and it times out and displays one of those dreaded error messages. Have no fear I found the answer on the at&t forums too. But credit for it should go to the folks over at the XDA site. (man there are some pretty tech savvy folks over there! I wish I was as knowledgeable as those guys) There are some settings in the registry for PIE to auto detect proxy settings. Let's keep it simple and say PIE is "hard coded" in the new rom to always use wap.cingular. So if your connected to isp.cingular, well... you get the picture. That may not be technically accurate, but I think it will be easy for most to understand. (at least for my two brain cells it is ) You will find that everything else that needs access to the internet will work, like email, weather programs, but one will assume they have no internet access if PIE doesn't work. Now lets fix that too, but it will take a registry edit to do it. If you don't know how to do registry editing, I suggest you get a reg editor like Resco or Total Commander and learn how to use it. Now here is what you do. Go to:
HKCU \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings
There will be a Dword labeled "EnableAutoDetect". The default value that detects the proxy is "0", you can change it to a "1" but I recommend deleting the entire entry. Also after a reset go back and make sure it is gone. Sometimes the changes don't stick and you will have to do it again. Another thing to remember is DON'T use the Proxy Manager cabs again. The enable proxy cab will re-write those settings back in there.
Update 8/5/07 8:25pm: I have experienced an anomaly of the "EnableAutoDetect" Dword showing back up in the registry after a soft reset. No proxy cabs were used to cause it. At this time I have not figured out the "why" because it happened only twice. I will edit this update if I find the cause/fix. For right now I thought users should be aware of it and delete it again if necessary.
The Technical Side of APN (Or, what's the difference between isp.cingular and wap.cingular?)
Instead of me spouting off a lot of Geek language and acronyms I don't really know, I am going to link to this page. I have posted this link before and the entire page is some really good infomation. For the information related to the title of this paragraph, scroll down to the section labeled "There are two Cingular access points".
Multimedia Messages
If you want ot send/recieve MMSs, this "real isp" connection is not going to work. For over all web browsing, email, weather updates, ect, the MEdia Net profile should work just fine. I leave mine on MEdia Net most of the time. It is only when I am going to tether, or if a web site is acting flaking (that's a techincal term you know) I will switch over to My ISP. If you are connecting through My ISP when a MMS comes in, it will be a text message directing you to www.viewmymessages.com. (As of this writing this is how it seems to work)
Yep, that should be it. Of course all I can see is my ticket to Banville, but from your copy and paste, that should be the one.
FYI, some of the links from the copy/paste are not functional. But you should see them on the OP on the at&t forum.
The full thread can be found here.
Can anyone point me to a guide to setting up a proxy server on my windows machine at home so that I can use that on my Tilt for free (relatively) internet?
Ive scowered forums, cant find a solid solution. Can you anyone help?
can anyone help?
How exactly would it be "free" internet? You are still going to need a data connection to access the proxy server.
it would be free because I would not be paying internet charges through my cellular provider using their wap server to access the internet, rather I would bundle the cost into my already home internet charges if I set up a home proxy and pointed my phone there.
It still would register as me making a call, but it would not register as me using the internet, hence 'free' internet.
Well technically that's what Opera Mini does. They have their "proxy" servers to feed you web pages. Guess what? AT&T doesn't care. Either way it's still data and I get charged for it (although I do have an unlimited data plan so that point is moot). They don't differentiate between web and any other kind of data access. It's all data and what you're proposing won't change the fact that you need a data plan to do it and will get charged for it.
Lidberg said:
Well technically that's what Opera Mini does. They have their "proxy" servers to feed you web pages. Guess what? AT&T doesn't care. Either way it's still data and I get charged for it (although I do have an unlimited data plan so that point is moot). They don't differentiate between web and any other kind of data access. It's all data and what you're proposing won't change the fact that you need a data plan to do it and will get charged for it.
Click to expand...
Click to collapse
if you redirect your proxy outside of AT&Ts MediaNET you will not get charged
OK, apparently you didn't read anything I typed. Let's look at it another way.
I have a Tilt. I can enable or disable AT&T's proxy server. Does it really matter? NO. Why? Because in both cases data is being transmitted over EDGE or HSDPA. It's bits and bytes traveling over the airwaves. Whether you are directly connected to the internet, using AT&T's proxy or your own proxy, it's all 1's and 0's to them. If they see those 1's and 0's being transmitted from your phone to the internet, you are getting charged for it.
If it was that easy to bypass AT&T's data plan, wouldn't you think everyone would be doing it? I know I would.
Prove me wrong.
In short: As long as you phone has to send a signal to the cellular towers that AT&T owns and operates, you will be charged data access. The Kaiser has built-in wi-fi, you can get around [most] of the associated issues with WAP by using that when you're at home; however, some programs require a WAP connection as opposed to a standard wi-fi connection, which would require you to send data over the air to AT&T's towers. It doesn't matter where the proxy itself is located, so long as you have to send data to the cellular towers, you're SOL.
mjhill said:
In short: As long as you phone has to send a signal to the cellular towers that AT&T owns and operates, you will be charged data access. The Kaiser has built-in wi-fi, you can get around [most] of the associated issues with WAP by using that when you're at home; however, some programs require a WAP connection as opposed to a standard wi-fi connection, which would require you to send data over the air to AT&T's towers. It doesn't matter where the proxy itself is located, so long as you have to send data to the cellular towers, you're SOL.
Click to expand...
Click to collapse
Good explanation
You need to turn off or disable the GPRS connection if you want to use WiFi without paying AT&T connection charges. There used to be a great program over at MoDaCo called NoData which when you ran it showed you the connections you had and let you disable the ones you wanted to have off. Then you could use Wifi without starting a GPRS connection. The program still exists, do a search for it hear or google it at MoDaCo. Only thing, I seem to recall that the creator of the program said it was only for WM5. I've seen people say that it works in WM6 but haven't tried it myself.
Short of that you could just go into DataComm and tap on the Data connection icon, to turn if off as you tap WLan to turn it on. Of course that will disable your data connection and push e-mail and you'll have to remember to start it up again afterwards if you want to get your push e-mail.
jspetrino said:
Can anyone point me to a guide to setting up a proxy server on my windows machine at home so that I can use that on my Tilt for free (relatively) internet?
Ive scowered forums, cant find a solid solution. Can you anyone help?
Click to expand...
Click to collapse
Did you happen to be a Verizon customer before you moved to ATT? Verizon tracks data usage through their proxy, so yes, you COULD get free internet with them. I did it all the time, and i miss it. ATT is a bit smarter about it. Instead of forcing you to pay for an unlimited plan or nothing... ATT lets you get on the internet whenever you want... they just charge you for it.
In short, AFAIK, there is no way to get free internet through ATTs network like i used to with verizon.
I had a similar question, which got no replies....
T-mobile puts you through it's proxies, so that pictures etc are compressed, which is a bit pants. That's one reason why you might want to do as described in the OP.
http://forum.xda-developers.com/showthread.php?t=345029
MHC48 said:
You need to turn off or disable the GPRS connection if you want to use WiFi without paying AT&T connection charges.
Click to expand...
Click to collapse
This simply isn't true. If you enable WiFi and you're passing traffic through GPRS, then you don't have your WiFi network configured correctly.
Go to Settings-Connections-WiFi and change the pull down for your adapter from "Work" to "The Internet. Associate with AP. Surf to your heart's content without using the cellular network.
You can shut off the phone connection if you like, but there's no need to do so.
Edit: Just for giggles, I fired up my WiFi configured as above and grabbed a 3MB file directly on the phone. GPRS Monitor recorded zero traffic increase.
while(!(linux)){wm} said:
Did you happen to be a Verizon customer before you moved to ATT? Verizon tracks data usage through their proxy, so yes, you COULD get free internet with them. I did it all the time, and i miss it. ATT is a bit smarter about it. Instead of forcing you to pay for an unlimited plan or nothing... ATT lets you get on the internet whenever you want... they just charge you for it.
In short, AFAIK, there is no way to get free internet through ATTs network like i used to with verizon.
Click to expand...
Click to collapse
yes I used to be Verizon never go back to them again! I used to use a quick fix on one of my LG phones redirecting to a proxy and i got free internet that way.
Hi all,
I've been at these forums a few weeks now and am starting to understand much about the PPC (I have a Tilt), software, ROM's etc.
But the one thing still confusing me is the Connection and Proxy Settings for AT&T.
Specifically, my phone has 4 connection set up: MediaNet/AT&T ISP/My Work Network/MY ISP. Why so many different settings and when are each one used or otherwise needed?
As for proxy settings, there seems to be 2. One setup in the phone connection settings, and then a "hidden" proxy. What are each of these used for and what are the advantages/disadvantes to turning each one off/on?
And finally how does WiFi fit into all of this, if at all?
Thanks in advance!
ok, i'm gonna take a stab at this see if i can get this right......pls feel free to correct me
AT&T isp - this one use the isp.cingular gateway, it is basically the one you use if you have a tethering plan (now tethering without a thethering plan is a whole different story altogether)
MediaNet - this uses the wap.cingular gateway, and you use this if you have a medianet unlimited or pda personal unlimited plan
My Work Network - use this if you want to connect to a vpn network
My ISP - this one has no connection setting whatsoever (at least for at&t) and just leave it at this one if you dont have a data plan and just want to use wifi.
the hidden proxy......its used if you want to access at&t services such as cingular video and the medianet homepage, as for the "other proxy" you mentioned......i have no idea what will happen if you disable it, i just leave it as it is.
I have an OEM HTC Kaiser with no mods whatsoever ( I dont want any awwww Sh%$ts!!) I go to the ATT website, Support by Device for my connection answers and nice screenshots on the settings. I think there is only one that didn't apply to my device...the hidden proxy one. Seems to help me with my problems
Those connection settings get me going too!
for the hidden proxy, you just need to find the enable proxy and disable proxy cabs. you can make shortcuts to both cabs in your start menu or wherever for easy access (just like the at&t roms). those cabs are all over the forums......search for it
ok first of all i did google this but didn't find anything specific
alright so under my "connections setting i have my "select automatic network" to MY ISP.....i thought that was enough to avoid data charges (since i only want to use wifi for internet browsing and emails...and i dont have a data plan).
So i was playing around with the email options and under the "server" settings i noticed the connection was set to Medianet....my heart came in my mouth since i've been going crazy with the e-mails thinking im connected to wifi I changed the connection to MY ISP and now i cant receive e-mails.....so right now im hoping i didn't get charged (somehow) or if i did.....what would be some good bs excuses to get it waived
so my query is..can i send/receive emails via wifi connection? If so, how do i set that up.....
Before i use to turn off "phone" and leave wifi on and i did receive emails with that setup.
so my 2nd qs is....does disabling phone disable medianet or mms capabilities ?
Disabling all Data services from isp
I'm right there with you. I do not want to get a data plan, as I only need internet every once and a while. I have enabled my wi-fi by doing this on my phone:
Start>Settings>Connections>Wi-Fi
then from there you can turn it on, find and join networks...
As to removing all access to your ISP, I am not sure. I keep trying but no matter what i do, every once and a while I notice the little "E" logo at the top symbolizing the EDGE network is being accessed. Which is not what I want. Anyone who can shed some light on disabling the data service from being accessed, it would be greatly appreciated.
hmm well I also do not use the 3G network. The best way I've found to do this is by using the Comm manager and going to the communications manager and disabling 3G and disabling Data Connection. Then if you keep wi-fi enabled it won't ever use the 3G network. If the ROM your using doesn't have a good comm manager then you can download one that has those controls because there are many on this website. Hope this helps,
-John
Modaco No Data is what I use
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
i have issues sending e-mails from the built in client, it always tells me i dont have access or some crap which makes no sense since i can sign into my account and check my e-mail from my phone so i normally have to go to the website for my e-mail to send an e-mail which is a pain