Hi all,
I upgraded my SPV3000 from Orange France to AKU 2.3 (Mr Clean). I tried my phone with a Bouygues CIM and it says "Unknown SIM status" then I have a unlock field where I am supposed to enter a code to unlock the device.
First, I tried to use a code I had from Orange to unlock my device but it did not work. Is it because I upgraded my device before using the code?
I thought this code was linked to the IMEI number, how come it does not work after a ROM upgrade.
Then I had a look at http://forum.xda-developers.com/viewtopic.php?t=47848&postdays=0&postorder=asc&start=0 but it say at the begining "warnnig; this steps do not work with rom version 2.21 or above so far." so what is the right method where you run AKU 2.3? In the same post, I saw something like downgrading... Fine for me. Before upgrading, I did a full backup of the original ROM. Will the Orange code work if I downgrade to the previous original Orange ROM or should I forget this code from Orange and just downgrade using the procedure of the post above?
My phone says "You tried one time". How many trials do I have and what to do when I cannot try anymore and it asks for a PUK code?
I am sorry I may ask a question with a existing post on the subject somewhere here but I am quite inefficient with the search function of this forum. It returns dozens of results where I cannot find the answer...
Related
Hi People
I am new to upgrading. Before I get the business of "you have not read the posts" I have read the posts. That's why I am writing here. The more I read, the more contradicting it is. I have the following:
T-Mobile MDA Unlocked SIM
IPL/SPL 2.26.0001
GSM 02.25.11
OS 2.26.10.2
I know this is a G4, but I have read that you can flash a ROM to an locked CID, but other areas say you cannot. I also have seen many different guides to flash, but some say the CID have to be unlocked others don't. I also have not seen whether the original ROM is saved in case you want or need to put it back. I have also read that you may have to input the GSM settings (I use Rogers in Canada). I bought this unit on eBay unlocked and all I had to do was put in my SIM card and it worked. Will the same happen if I upgrade the ROM? I find after reading so many threads it seems so confusing and was hoping someone here could help me out as you all seem to love flashing ROMs.
Thanks so much in advance,
Mike
Read some more and took a chance and it worked
Miker2006 said:
Hi People
I am new to upgrading. Before I get the business of "you have not read the posts" I have read the posts. That's why I am writing here. The more I read, the more contradicting it is. I have the following:
T-Mobile MDA Unlocked SIM
IPL/SPL 2.26.0001
GSM 02.25.11
OS 2.26.10.2
I know this is a G4, but I have read that you can flash a ROM to an locked CID, but other areas say you cannot. I also have seen many different guides to flash, but some say the CID have to be unlocked others don't. I also have not seen whether the original ROM is saved in case you want or need to put it back. I have also read that you may have to input the GSM settings (I use Rogers in Canada). I bought this unit on eBay unlocked and all I had to do was put in my SIM card and it worked. Will the same happen if I upgrade the ROM? I find after reading so many threads it seems so confusing and was hoping someone here could help me out as you all seem to love flashing ROMs.
Thanks so much in advance,
Mike
Read some more and took a chance and it worked
Click to expand...
Click to collapse
hi,
ok,now let me try to explain in plain words,
1. U cannot for sure upgrade to a newer rom untill u r CID unlocked, now as u say u got ur wizzard from ebay.now it must have come with a pre-installed OS,plz check from which carrier it is from.If its Cid locked than it can only be upgraded with that official rom from which it came pre-installed with. But if u want to upgrade to some other wm6 cooked rom than u'll have to get it Cid unlocked.
now to upgrade,do the following:-
a)If u want to upgrade with official rom from which it came preinstalled,than visit the official site and download the official rom for ur exact device and upgrade without any Cid unlocking process ,its fairly self explanatory,how to upgrade with official rom as it comes with a self upgrade romutility.
b) if u want to upgrade to any other wm6 cooked rom,than i'am afraid u'll have to CID unlock ur device.As u say u have a G4 device there's a different procedure to Cid unlock it than G3.It's done with a utility tool called SHELLTOOL.search and read how to go about it.First download a tool "WST tool" by Mestrini ,install it and check if ur device is Cid locked or unlocked.If u find it locked than adopt the Cid unlock method through SHELL tool,if its already Cid unlocked than go ahead & flash with any wm6 rom.
As for ur question about sim unlocked,its different being from CID unlock.with sim unlocked u can put any carrier sim and use ur device.But with Cid unlock u can upgrade to any rom u desire.
Well, once SIM/CID unlocked it remains unlocked forever,unless u personelly don't lock SIM/CID.
Well,I believe if it came SIM unlocked, than it might be CID unlocked also.cuz all the carriers never give Sim unlocked.but than there might be some exceptions.therefore u must get it confirmed before any upgrade.
Hope I was able to clear some of ur doubts.goodluck
zabardast_1 said:
hi,
ok,now let me try to explain in plain words,
1. U cannot for sure upgrade to a newer rom untill u r CID unlocked, now as u say u got ur wizzard from ebay.now it must have come with a pre-installed OS,plz check from which carrier it is from.If its Cid locked than it can only be upgraded with that official rom from which it came pre-installed with. But if u want to upgrade to some other wm6 cooked rom than u'll have to get it Cid unlocked.
now to upgrade,do the following:-
a)If u want to upgrade with official rom from which it came preinstalled,than visit the official site and download the official rom for ur exact device and upgrade without any Cid unlocking process ,its fairly self explanatory,how to upgrade with official rom as it comes with a self upgrade romutility.
b) if u want to upgrade to any other wm6 cooked rom,than i'am afraid u'll have to CID unlock ur device.As u say u have a G4 device there's a different procedure to Cid unlock it than G3.It's done with a utility tool called SHELLTOOL.search and read how to go about it.First download a tool "WST tool" by Mestrini ,install it and check if ur device is Cid locked or unlocked.If u find it locked than adopt the Cid unlock method through SHELL tool,if its already Cid unlocked than go ahead & flash with any wm6 rom.
As for ur question about sim unlocked,its different being from CID unlock.with sim unlocked u can put any carrier sim and use ur device.But with Cid unlock u can upgrade to any rom u desire.
Well, once SIM/CID unlocked it remains unlocked forever,unless u personelly don't lock SIM/CID.
Well,I believe if it came SIM unlocked, than it might be CID unlocked also.cuz all the carriers never give Sim unlocked.but than there might be some exceptions.therefore u must get it confirmed before any upgrade.
Hope I was able to clear some of ur doubts.goodluck
Click to expand...
Click to collapse
@zabardast_1 dude..
@Miker2006
Upgrading won't affect your Sim unlock status, it's permanent.
You don't NEED to CID unlock your phone to upgrade:
You can use Soft SPL to make the phone temporary think it's CID unlocked (while flashing).
Or you can semi-permanent let the phone think it's CID unlocked by Hard SPL.
This SPL will mimic a CID unlocked state, so you can flash all kinds of ROMs to your device.
BTW ShellTool WON'T cid unlock your device, Hard SPL is the closest you get to a Free CID unlock.
Best regards,
EquinoXe
PS. Read the stickies before Flashing, don't turn your wizard into a brick.
Actually it is a good show case that reading helps .. one day after his post Miker2006 did ..
Miker2006 said:
....
Read some more and took a chance and it worked
Click to expand...
Click to collapse
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
no. but you need to run simlock.exe which is in the windows folder. All of it's right here http://forum.xda-developers.com/showthread.php?t=361039
(a la bill lumbergh) If you could just go ahead and RTFM that would be terrific.
ich-t said:
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
Click to expand...
Click to collapse
Are you sure you have 6.1? AT$T has not released a 6.1 upgrade for the Tilt. If you are sure that you have 6.1, then it must be a cooked rom . In that case all you have to do is re-flash to whatever rom you want.
ich-t said:
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
Click to expand...
Click to collapse
if all you want to do is sim unlock your device than the only thing you need to do is pick up the phone and call att. The will give you the unlock code with in 5 minutes. (just tell them you are going over seas and need the unlock code).
If however you want to flash a rom to your device .. than you need to flash hardspl; a simple search "hardspl for kaiser" will pull all info you need. and after that you need to read the kaiser wiki section on rom flashing.
Once you have full understanding of what you are doing than happily proceed
I look at the my Rom version and it is 1.57.502.2.
and my Radio Version is a 1.27.12.11
So is that a WM 6.1 or just a 6.0.
if all you want to do is sim unlock your device than the only thing you need to do is pick up the phone and call att. The will give you the unlock code with in 5 minutes. (just tell them you are going over seas and need the unlock code).
Click to expand...
Click to collapse
Thanks, but I bought this phone on ebay used. So I do not have a contract and I want to use it with t-mobile
ich-t said:
I look at the my Rom version and it is 1.57.502.2.
and my Radio Version is a 1.27.12.11
So is that a WM 6.1 or just a 6.0.
Thanks, but I bought this phone on ebay used. So I do not have a contract and I want to use it with t-mobile
Click to expand...
Click to collapse
That is the original AT$T 6.0 rom . AT$T has not yet upgraded that rom to 6.1
If you want to unlock your phone to use on another carrier, just follow the steps on this wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
denco7 said:
That is the original AT$T 6.0 rom . AT$T has not yet upgraded that rom to 6.1
If you want to unlock your phone to use on another carrier, just follow the steps on this wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
ne of the steps are
"Do not try this on 6.1! You will need to downgrade to 6.0"
Wow you diggin in the graveyard
I have WM61 on my Tilt. I also have my unlock code from ATT. Where do I input the code?I was told there would be a window asking for my unlock code. Instead I get the phone stating I can make emergency calls.
Where do I input my unlock code? Does anyone know?
also tried simlock.exe in windows and it said code for region verified but then nothing else happened and i cant open the program again..can i downgrade to 6.0 somehow without using software because i am out of the states and i dont have the cord to connect to computer...also i have a mac so it wont work anyways..thanks for any help..i have searched all over but cant seem to find anyhting
http://forum.xda-developers.com/showthread.php?t=402393
yeah i read that..i did it.....now my att sim cant be recongnize...and my other sim cant be recongnized....any ideas?...
I have read soo many things that I think my eyes are starting to bleed. I have read so many things that make me question which is the most current. I think I am ready to do something then I read.
stylez said:
Wow you diggin in the graveyard
Click to expand...
Click to collapse
Can someone please help me figure out what to do? Do I, or do I not downgrade before I can sim/cid unlock?
My current phone is
R 1.65.21.18
G 25.88.40.05h
D 3.57.00.00
I have already loaded the Hard SPL, and am wanting to Flash soon. I have been reading for the last 4 days, and keep reading so many admins telling us to search and read, but there is soo much info out there, that it is hard to tell what is needed.
Also, Can someone explain the difference between a cid and superCID?
Liquidd.
Just make sure you have the proper hardspl for 6.0 and make sure you follow
http://forum.xda-developers.com/showthread.php?t=433835
and you are done.
You really should read until your eyes actually bleed. j/k
That worked great. Thanks a lot.
Liquidd
Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
singhravi437 said:
Hi,
I just bought a T-Mobile Wing and wanted to unlock it for international usage and loading WM 6.1 (custom cooked ROMS). I hope the procedure would be same as I did with my previous WIZARD.
Can someone help me here in this regard?
Thanks.
Click to expand...
Click to collapse
One Thread hat done it as well, for the rest you hat only to use the first Thread in Herad or Herald Mobil 6.
See here:
http://forum.xda-developers.com/showthread.php?t=369397
http://forum.xda-developers.com/showthread.php?t=327046
contact jockyw2001 for SIM unlocking
"SIM Locked" Network Locked - Enter unlock code
Even after doing the Hard SPL the device is asking for unlock code if I insert a foreigh sim card.
I tried doing the USPL also. Same results.
After Hard SPL I also tried to install Touch_IT_wm6.1_Full_-Herald_P4350.zip ROM. It installed well but show same SIM locked error.
Please let me know the steps to start fresh and unlock the phone for international usage. I also wanted to load custom rOM but as SIM not supporting so not able to proceed further.
Apreciate any help in this regard.
Device: T Mob Wing (HERA110)
I answered your question in the other thread.
Please don't double or cross post
why there is no unlock tool that work with the mda basic...all the other platforn have one, only these one doesn't..can somebody tell me a reason..the security protocol are bigger...and why for all the unlock codes u must pay...and for other devices are free?...don't take this in the bad why..i just what a info...i am saying this because i have search the entire internet for a unlock tool and i only gat the pay versions...
well i guess i didn't get ya clearly ... but if u looking for unlock tool so you can upgrade you rom (your windows) there is one in the forum in the section of development for viva ... think it will work ... if thats what you need
Ruch0 said:
why there is no unlock tool that work with the mda basic...all the other platforn have one, only these one doesn't..can somebody tell me a reason..the security protocol are bigger...and why for all the unlock codes u must pay...and for other devices are free?...don't take this in the bad why..i just what a info...i am saying this because i have search the entire internet for a unlock tool and i only gat the pay versions...
Click to expand...
Click to collapse
I think you are talking abt unlocking it for all networks. There cant be an app that unlocks your phone for dfferent carriers because each phone comes locked from the factory and to unlock, you require a code that matches the IMEI number, the unlock code for the matching IMEI number only exits with the manufacturing company.
So,
Here is what happened, I've got an HD7 that has been laying around my office for months, it was actually never used and it has never been updated.
Unfortunately I lost my previous phone and I decided to use that one, but... It was carrier locked to T-Mobile and I did not want to either purchase or beg t-mobile for a code.
Next thing I did was to carefully read every post I could find regarding HD7 carrier unlocking and found myself with only one option: Install a custom ROM on my phone.
The phone had the SPL 1.20 so I decided to install Cotulla's HSPL and then install a Custom ROM, but it failed twice to flash the device, once at 20% and then at 80%.
Right now the Phone goes right into the bootloader screen (It does show cotulla's HSPL as installed) after a short load atempt (obviously the OS is only partially installed).
Im looking forward to get advise on how to install the custom ROM and what I might be doing wrong.
Masticore26 said:
So,
Here is what happened, I've got an HD7 that has been laying around my office for months, it was actually never used and it has never been updated.
Unfortunately I lost my previous phone and I decided to use that one, but... It was carrier locked to T-Mobile and I did not want to either purchase or beg t-mobile for a code.
Next thing I did was to carefully read every post I could find regarding HD7 carrier unlocking and found myself with only one option: Install a custom ROM on my phone.
The phone had the SPL 1.20 so I decided to install Cotulla's HSPL and then install a Custom ROM, but it failed twice to flash the device, once at 20% and then at 80%.
Right now the Phone goes right into the bootloader screen (It does show cotulla's HSPL as installed) after a short load atempt (obviously the OS is only partially installed).
Im looking forward to get advise on how to install the custom ROM and what I might be doing wrong.
Click to expand...
Click to collapse
well if you can get to the bootloader screen...why don't you install a custom ROM using Task29 ?? that should work...
Well, I tried to install the factory ROM but it fails as well, it always gets stuck at some point beyond 80%.
I was able to install Deepshining ROM, but the sim lock remains... I guess I will have to buy an unlock code. ¿Can someone tell me what is the site site to buy one?
Masticore26 said:
I was able to install Deepshining ROM, but the sim lock remains... I guess I will have to buy an unlock code. ¿Can someone tell me what is the site site to buy one?
Click to expand...
Click to collapse
i also had this problem
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
savvyone
Dollyena said:
i also had this problem
Click to expand...
Click to collapse
You don't have to buy the unlock code. Call T-Mobile, ask for technical support (bypass customer service, it will take too long), and request the unlock code. Have the IMEI # for your phone available. They will email the unlock code to you usually within 24-48 hours. I did this last month and got the code the same day.