I've installed Duttyroy's HTC Touch Rom.
Now I want the AT & T Deathstar as splash screen (Cause that one rox)
I've downloaded: at&t_deathstar.nbh from this forum.
But when I throw it in: KaiserCustomRUU.exe it does not install the splash screen.
It keeps saying: ERROR 204 : File Open.
Can someone help me?
I think the splash screen isn't correct. Can someone re-make the splashscreen into a nbh.
Thx.
Does someone know? PLz help.
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
jjmorris100 said:
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
Click to expand...
Click to collapse
install this official rom from HTC
http://rapidshare.com/files/66085556/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.exe
Its for RUS QTEK_AO7.
Then you will have SPL 1.10
I have similar problem
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
hi, can any1 send me a link for a ger version of wm6.0pro ?
Wigo said:
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
Click to expand...
Click to collapse
I'm not sure that I understand well, but if you flash from SD, it finish in 100% and than go to three color boot screen? ....
Hi alebo caf Vašek ;-)
My problem is that always stuck on boot image HTC or Windows Mobile blue screen. I can´t use way copy necesseary files to root of phone memmory and than run sspl etc...I have to turn manualy to three-color mode, than connect USB cable and run upgrade utility but still froze instalation on 2%, If I use SD card methode with BREEIMG file uploading doesn´t start....
p.s.: Ak by si mal dáku radu tak možno lepšie vysvetliť po česky ;-). Moje ICQ 208-393-971
Dík
CZ Rom
I would like to install new ROM into my Mteor, but I have no experience doing it. I do not know which version to try, all I need is to be able to enter czech letters on HW keyboard as with original ROM. Any sugestion? I preffer personal answer in czech language ([email protected])
Hello everyone,
I bought a blackstone.
I have a problem with Splash screen..
My Blackstone loads 4 splash screen:
1. Smart Mobility (non animated)
2. China Mobile - DOPOD (animated)
3. HTC Logo (animated with sound)
3. WinMo logo
if you wish you can watch splash process from my video http://www.4shared.com/file/171299331/c90e702/CIMG0103.html
My problem is to be unable to remove or change 2.nd China Mobile DOPOD picture?
How can I do this?
Methods I have tried:
1. Hard Reset
2. Flashing many ROMs including Official ones
3. Flashing HardSPL
4. Flashing my own SPlash.nbh
Thanks in advance.
ultraslan said:
Hello everyone,
I bought a blackstone.
I have a problem with Splash screen..
My Blackstone loads 4 splash screen:
1. Smart Mobility (non animated)
2. China Mobile - DOPOD (animated)
3. HTC Logo (animated with sound)
3. WinMo logo
if you wish you can watch splash process from my video http://www.4shared.com/file/171299331/c90e702/CIMG0103.html
My problem is to be unable to remove or change 2.nd China Mobile DOPOD picture?
How can I do this?
Methods I have tried:
1. Hard Reset
2. Flashing many ROMs including Official ones
3. Flashing HardSPL
4. Flashing my own SPlash.nbh
Thanks in advance.
Click to expand...
Click to collapse
splash screen 2:
I think you have flashed a rom with custom boot splash screen, so if you flash to a different ROM that does not include one, you will still see the screen during boot up. Go to this thread for instructions on changing your initial (boot) splash screen.
splash screen 3:
simply chose one gif file rename it to animated.gif and after that copy to windows folder
splash screen 4:
same as 3 only this is another file welcomehead.192
I have read whole of the thread you advised, but they are about flashing/changing the 1st splash screen. But I can change 1.st splash screen anyway..
My problem is not to be able to change 2nd splash screen..
If you watch the video
http://www.4shared.com/file/171299331/c90e702/CIMG0103.html
I want to change screen of China Mobile DOPOD screen..
is there any idea for 2.nd splash screen in video?
Solved,
Step by step:
1. generated Splash.nb
2. in htc rom tool, devices.ini (or other that contains device configurations) file, I replaced 0x600 to 0x601 to change second splash screen..
3. generated nbh, flashed nbh
credits go to cmonex..
thanks cmonex..
same problem here
I have the same problem with the Dopod splash screen, but I didnt understand what you actually did to fix it (I am new at this). Could you maybe upload a the file that you used to change the splash screen? Thanks.
Hi, small question.
How can i change the first logo which is shown on diamond startup?
In my case its the vodafone logo.
How can i change it to my own picture?
Custome rom is flashed.Olinex is in start.
I meen the very first boot logo, no the windows startup logo.
First whis poweron.
Big thanks
There is some good threads on the forum that will teach you how to do it. Basicaly it involves creating a new Splash Screen .nbh file that you will flash to your device in the same manner as you would flash a new ROM.
check this thread i made aggges ago about flashing splash's, there are some already made by me and whiskeybro and tools and a tutorial to make your own
http://forum.xda-developers.com/showthread.php?t=512436
i have flashed the win7 style windows and it have changed my boot screen with a white htc logo (or something).. so i want the original boot screen with "bios" (if you all get me).. where it give us informations about the memory, processor, etc.. so help me!
Moved as not ROM Development.
Search splashscreen in Kaiser section thats first logo may also want the welcomehead.png.
You can also use ROM editor on a stock take the splash to which is .nb and use htcrt.exe to make flashable .nbh.