Database Develop

Just got Wing ..NEED HELP !!

ok so im new to this game..ive been reading the threads and posts over and over and over again...so ive got a brand new unit so i should have to install any RUU...so i make sure im a guest in active sync..i download the RAR file for touchflo on my computer..i drag the ASerg Policies.CAB file from a folder into my Wing folder named Storage Device..run the program..then i soft reset...then from my computer i run 1_RomUpdate.bat or whatever...the Dos prompt comes up..its says press any key I do..then it makes a list of all these files and after each file it says (for example "ce_run,exe is not recognized as an internal or external command, operable program or batch file. ...after that i hard reset like im supposed to...for some reason it just goes back to the regular Wing interface...can someone help me out..please...i got the phone a couple hours ago and i cant put it down until i figure this out LOL..its driving me nuts

Hard Reset then redo. Or put it back to the original RUU deal then try it again.

latinluvuh said:
ok so im new to this game..ive been reading the threads and posts over and over and over again...so ive got a brand new unit so i should have to install any RUU...so i make sure im a guest in active sync..i download the RAR file for touchflo on my computer..i drag the ASerg Policies.CAB file from a folder into my Wing folder named Storage Device..run the program..then i soft reset...then from my computer i run 1_RomUpdate.bat or whatever...the Dos prompt comes up..its says press any key I do..then it makes a list of all these files and after each file it says (for example "ce_run,exe is not recognized as an internal or external command, operable program or batch file. ...after that i hard reset like im supposed to...for some reason it just goes back to the regular Wing interface...can someone help me out..please...i got the phone a couple hours ago and i cant put it down until i figure this out LOL..its driving me nuts
Click to expand...
Click to collapse
It's not seeing the files that it calls for within that batch file. Where do you have your files stored?

what rom are you trying to flash?
I know with PDAVIET you have to aserg twice and soft reset after each.
Also, IT IS IMPERATIVE that you flash over an RUU.

as far as "ivanmmj's" comment goes..lets see where am i stashing the files..after it opens up using WINRAR i just use the directory right from WINRAR im not actually moving the files onto my hard drive....
I am was trying to install the ITOUCH FINAL V2 blah blah blah...
I installed the 5 button setup and the overclocking program with the battery indicator..
i got everything to work that just involves moving CAB files over..obviously a simple thing that doenst need a page long thread to explain how to install..
I still need help..im following directions but like ivanmmj said its not reading the files ..still need help LOL

latinluvuh said:
as far as "ivanmmj's" comment goes..lets see where am i stashing the files..after it opens up using WINRAR i just use the directory right from WINRAR im not actually moving the files onto my hard drive....
Click to expand...
Click to collapse
There's your problem. You need to unrar the files to a directory. Then open a command prompt and run the batch file from that directory.

how to install cab file?

Hey I am new, and I am wondering how do you install cab files? I downloaded the midlet manager and i extracted it on my pc, and i see a bunch of files but none of them are cab files,they are all unidentified,can some one help me please? much appreciated
thanks in advanced

Just copy and paste the zipped cabfile in your phone anywhere through Activesync,preferably 'My documents' folder and execute it there in the phone,it'll run and install all by itself.
Cheers!

when I extract the file,I dont see any cab files, So i just put the whole folder in my phone,I try clicking on the files and they wont open,I just get a message sayin
"There is no application associated with "00CAB10A",run application first then open this file from within the application

ok, for 'Midlet' here's how you do it as per the post in Midlet Manager by risidoro:-
------- HOW TO INSTALL ------------
- Download Risidoro's Intent MIDlet Manager version 11.1.7.1023
- extract the cab (inside the archive) somewhere in your PC (e.g. Desktop)
- copy to somewhere in your PocketPC (e.g. \storage card)
- in your PocketPC, navigate with File Manager to the cab and tap on it to install
- when asked, choose to install in the Device (and NOT in Storage Card!)
- reboot when asked
or read the thread :-
http://forum.xda-developers.com/showthread.php?t=286604
Cheers!

I just said when I extract the folder I dont see any cab files, are files are unidentifed,do you understand what am saying,I see a bunch of files but none of them have cab extensions i see
setup
and other files buh none of them have cab file extension,
can you please just send me the cab file because I cant seem to extract it or get it, maybe my pc doesnt have some kind of plug in? i dont know

snaxxx said:
I just said when I extract the folder I dont see any cab files, are files are unidentifed,do you understand what am saying,I see a bunch of files but none of them have cab extensions i see
setup
and other files buh none of them have cab file extension,
can you please just send me the cab file because I cant seem to extract it or get it, maybe my pc doesnt have some kind of plug in? i dont know
Click to expand...
Click to collapse
You are NOT supposed to unpack the CAB!!!
You must copy the cab (Risidoro_Intent_MIDlet_Manager_11.1.7.1023.cab) found inside the zip file from the thread that zabardast linked to your device and simple run it (one click via File Explorer or double-click with Total Commander)
as simple as that...

thank you so much
I got it installed

ok I have a htc droid eris and I can't find the file manager on my phone to get to the files on the sdcard. so I downloaded a file manager app and when I click on the .cab file it does not just install it asks what I want to do open with kind of thing. like browser and a bunch more things I have tried most of them and nothing is working. Is there something else I need to install a .cab file with this phone or wtf is my dumb butt doing wrong to not be able to install it.

Install .cab files to unlock sd card.
Hi, think ive messed up here... can someone help or confirm my balls up!
Ive been following this tutorial to flash my hd2 with an updatable Win.7 rom;
http://forum.xda-developers.com/showthread.php?t=1236027
Charging ahead, installed, had a few probs along the way but worked through them... got it installed and working!
Then, moving onto step two of my plan, a dual boot of Android from sd card... :S Do you know whats coming? After re-reading the install instructions I noticed the 'Unlock SDCard' a few steps before installing the rom. :S I have now learnt that Windows mobile 7 locks the sd card to the device and is un-usable in anything else, having already messed up an 8gb and a 16gb...!
Could anyone please tell me if it is possible to 'somehow' install the .cab files to unlock the sd card...? or anyone know of a way to decrypt the sd card?
"THE SD CARD IS UN-READABLE IN MY PC AND PHONE WITH WM6.5 STOCK ROM"
If I re-install the rom from the 'back to the future' tutorial (link above), the storage is available for use on the hd2, but still cannot be seen by my PC... making it hard to install .cab file or anything else!
Both my sd cards have effectivly been high-jacked by microsoft...!
Please help me liberate my GB's...!

Is there a Cabs installation tutorial????

I've searched and I've asked and no one wants to help...Could someone please point me in the direction that I need to be in
Purpose
Sliding sounds
Games
and other applications..
Thanks

A CAB installation is just like a Desktop installation but on your phone... Transfer the CAB to you phone (I put all mine on the memory card), click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card.

mchapman007 said:
A CAB installation is just like a Desktop installation but on your phone... Transfer the CAB to you phone (I put all mine on the memory card), click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card.
Click to expand...
Click to collapse
So I copy the folder to the card..Then I click the cab from the desktop or using the phone???
*tries it out now*
Thanks man for you input

On your storage card create a folder called "cabs". Then put the cabs you want to install on your phone in this folder. Then open up file explorer (on your phone) and go to the cabs folder. Then select the cab you want to install by pressing it on screen or with the hard down key. Your phone will start to install the cab and it will ask you where you want to install (either phone memory or your memory card), choose which one you want. Note that some programs work better when installed to the phone (read and you'll find out suggestions). After the installation is complete your phone will tell you that it was successful.
Ron

I don't know
"click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card."
Do I unzip with the phone or the desktop???? I copied the folders to the card...after that I'm lost...How do I run the application???

smoka said:
I don't know
"click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card."
Do I unzip with the phone or the desktop???? I copied the folders to the card...after that I'm lost...How do I run the application???
Click to expand...
Click to collapse
Unzip the folder on your computer and transfer the cab over into the "cab folder" on your memory card. Open file explorer on your phone, navigate to the "cab folder" on your memory card, select the cab to install and your done. No need to copy the whole folder to your phone, just the cab.
Ron

mark43 said:
On your storage card create a folder called "cabs". Then put the cabs you want to install on your phone in this folder. Then open up file explorer (on your phone) and go to the cabs folder. Then select the cab you want to install by pressing it on screen or with the hard down key. Your phone will start to install the cab and it will ask you where you want to install (either phone memory or your memory card), choose which one you want. Note that some programs work better when installed to the phone (read and you'll find out suggestions). After the installation is complete your phone will tell you that it was successful.
Ron
Click to expand...
Click to collapse
Thanks for your input...I tried that and it gives me
"There is no application associated with"00CABE91".Run the application first,then open the file within the application"
What am I doing wrong????

smoka said:
Thanks for your input...I tried that and it gives me
"There is no application associated with"00CABE91".Run the application first,then open the file within the application"
What am I doing wrong????
Click to expand...
Click to collapse
That is not a .cab I will attach a cab for you to try. I it is the transformers sliding cab. No need to unzip. Just download it to your computer and transfer it to your phone with either activesync or take out your memory card, stick it into your computer and put it in the folder you want. Let me know if it works.
Ron

thats the one I'm trying to use...So I need to pull the memory card out and active sync it... So how do I add those to the active sync task????
Thanks for your patience

smoka said:
thats the one I'm trying to use...So I need to pull the memory card out and active sync it... So how do I add those to the active sync task????
Thanks for your patience
Click to expand...
Click to collapse
Open activesync and conect your device. Make sure you have a green symbol and click explore which is to the right of schedule. It opens your device and navigate to your memory card and cab folder if you have one. Then on your computer right click on the cab you downloaded and select copy. Now go to the window you brought up when you hit explore and right click in the destination and select paste. Now you have the cab on your phone. Next, on your phone open file explorer and navigate to the folder where you just pasted the cab and select it.
Ron

Come ON!!!!!
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.

mchapman007 said:
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
Click to expand...
Click to collapse
no offense

mchapman007 said:
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
Click to expand...
Click to collapse
+1!!!!!!!!

Do not uncompress (unzip or rar) cab file.
He is uncompressing the cab into a folder and transfering it. His compression software shows the cab as compressed.
Just transfer the cab uncompressed and click on it and it will install. I bet that does the trick.

Also, if you want you can change it so that your compression software doesn't see CABs. I use WinRAR and you can just uncheck it under options>settings>integration and just uncheck CAB.

... LOL?...
a .cab is the "installer file" in windows mobile.
Steps:
1. Copy the .cab file into your phone
2. Open the File explorer in your phone and look for the .cab File
3. Click on it
4. Choose the place where you want to install it
5. Enjoy your new program(or sliding sound or anything)

Batchell said:
Do not uncompress (unzip or rar) cab file.
He is uncompressing the cab into a folder and transfering it. His compression software shows the cab as compressed.
Just transfer the cab uncompressed and click on it and it will install. I bet that does the trick.
Click to expand...
Click to collapse
Thanks Batchell..However I was able to get my question answered by ANOTHER HELPFUL FORUM!!!!! I've only had my phone for 2 months and I DIDN'T know that you didn't have to unzip the files...I didn't have to worry about that stuff with a TREO... So to all that was helpful I really appreciate it..and the others with all of the slick jokes are bunch of assholes...yep I said it..Thats why I asked for a tutorial for cab installation smartass!!!!!!

This is a developer forum. If you ask a question here, it is assumed that you have a moderate level of computer literacy. This includes being able to unzip files.
Next time, please state you know NOTHING and people will give you the appropriate level of help.
Before others flame you even more for your last comment, I'm closing this thread for being inflammatory.

Run SD Cab with autorun.exe

hello
i need to add a username into the registies for a number of devices i'm flashing. Unfortunatly the usernames all need to be different i.e. PDA001, PDA002 and so on...
I've created a number of different cab files each for a different device that will add the username in.
So is it possible to run the cab file off the storage card as part of the hard reset process. i've updated the SD card with the file Username.cab which is the name of all the cab file, then added "CAB: \Storage Card\Extended_ROM\Username.cab" in to config.txt which is in the Extended ROM. i tested it but it didn't work.
Has anyone got any ideas
Or may be have a shortcut to the cab file added into start up. Would that work?

I'd suggest that you instead edit an existing (or relatively insignificant) CAB file (that you'd probably have no use for anyway) with the registry entries/additions so that its guaranteed to be included when you do the Extended ROM customization.
Did you ensure that you copied all the files from an original extended ROM correctly (before making your modifications)?

The thing is I have around 250+ device which need flashing with the same image and as all the devices will require a different Username adding into the registies I 'll need to run an external cab file, a cab file which will be different for all the devices and it's best to run it from the SD card.
I tried to adding a cab file into the Extended ROM which will install a shortcut into the startup folder the shortcut is to the cab file on the storage card. But for some reason it didn't run.
I have a couple of SD cards with an image of my Extended rom on so if anything goes wrong i have the backups.

Whats wrong with having the 'end-user' maually execute the .CAB file?
Why don't you simply customise one PDA (the way you wan't with your preconfigured settings) (minus the user/device name), then do an entire backup using SPB BACKUP (onto a SD Card). You can then restore this image on all 250+ devices (sounds time-consuming,but it really isn't).
All the end user had to do, is to manually execute your .CAB file when they are issued the units.

This is your true answer (in my opinion):
http://www.spbsoftwarehouse.com/products/backup/?en

RE: Whats wrong with having the 'end-user' maually execute the .CAB file?
Basically the devices are used by Market research interviewers who work for us, most of whom are not familier with the devices and are not computer litterate. I'm responsible for a small support team and also the development of the devices. The software we use is already extremley simple and all they need to do is click a buttom "Connect" if the username is not already inserted they get a box "Logon Failed, please check the following details are correct." and a username and password box is displayed and they simply need to type in the id number from the sticker on the back of the pda (like PDA001).
We have just had a large project in feild and over the period we have around 200+ user. Around 50% of the call we took, at some point they had problems entering the username. As much as SPB backup would be of use, if they can't already do a simply thing like type in PDA123, asking them to do this seem like asking alot and would probabily cause more issues.
We already have all the other information in the registries for this application and the username is the only thing which isn't consistant through out.
Do you know if it would be possible to prompt them to run the cab from the sd card which enters the username into the registires on startup?

Nunwood PDA said:
Do you know if it would be possible to prompt them to run the cab from the sd card which enters the username into the registires on startup?
Click to expand...
Click to collapse
Sure it is possible. Did you already try placing a shortcut to the .CAB in "Windows\StartUp" ?. Likewise, you can easily create another script that deletes that shortcut (to ensure that its only used once).
Please keep us posted, on your developments.

Nokia 3650 said:
Sure it is possible. Did you already try placing a shortcut to the .CAB in "Windows\StartUp" ?.
Click to expand...
Click to collapse
Yeah, it didn't do anything. I had a cab file in the extended ROM which placed the shortcut in the dir. \Windows\startup\. For some reason nothing happened, but when I navigate to the .cab file it ran without any problems.
When you say create another scipt, how would I go about doing that? If i had an .exe it could act as a link to the cab on the SD card. i'm not familier with this kind of method. But I think that would solve the problem.
The location of the .cab is: \Storage Card\Help\UserName.cab

Thanks for the exact location. I'm just compiling something for you in visio Studio 2005, that will execute the .CAB file when run at automatically from startup (it'll do this only once).

how to install applications?

hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?

Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications

Marridi said:
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Click to expand...
Click to collapse
Or for a longer version of this:
StarMonkee said:
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Click to expand...
Click to collapse
Do the following, hehe
When you download most programs they will be in .CAB format. Now all this means is that they can be installed DIRECT from the phone.
What I do is create a folder on my Diamond in Internal Storage called APPS and make sure my Diamond is synced to my pc / laptop using Activesync on XP or Windows Mobile Device centre if on Vista and then copy all the .CABS that i have downloaded into the APPS folder on my phone.
Once im ready to install the applications its very simple.
On your Diamond click on START and then PROGRAMS and locate FILE EXPLORER.
When FILE EXPLORER has loaded up in the top left of the window you will notice a memory card icon with the current directory you mobile is pointing to, push this and you will then see MY DEVICE and the location you are currently at.
If you have used a pc before its very similar to how the pc windows explorer used to navigate, anyway, select MY DEVICE and then choose INTERNAL STORAGE and then APPS.
Then its just a matter of selecting which application you wish to install as all the .CABS will be displayed. Select the one you want to install and follow the installation process.
If there are any small programs 1mb or less then I tend to install these onto my phone storage memory and for games I install them onto INTERNAL STORAGE but its up to you. Some programs require a SOFT RESET to work.
The SOFT RESET button is located where the STYLUS is stored on the phone, pull the STYLUS out and then you will see a RED BUTTON inside.
Push this and your phone will restart.
There is more information here at good ol xda-developers.com and also http://modmydiamond.info
Hope this helps!
Tom

thnx guys, but i know this, i did install some applications that end with caB, but when i tried to install the gsen or the advanced config for example, they didnt come in .CAB form. they came as zip and when i opened the file, all there was files and the one names setup was as xml.
i dont know, maybe i downloading the wrong files!! plz help? where do i download those files in .CAB format?

it worked, thnx guys..
xda is the best forum all around..