ext_rom in storagecard.... - MDA III, XDA III, PDA2k, 9090 Software Upgrading

i put autorun + config.txt in extrom and any other file in a folder on storagecard
then I have modified config.txt and in place of “CAB: \ Extended_ROM \ CameraWizard_BA26_TMO_WWE_Customize_RC23.CAB”
I have written “CAB: \ Storage Card \ ExtROMcard \ CameraWizard_BA26_TMO_WWE_Customize_RC23.CAB”
then I have created folder in the storgecard called “ExtROMcard”
and them I have put us the several one cab that I must install
all it seems to work
some suggestion?

depends what rom your using, but for example on helmi's rom the extrom folder in your SD card MUST be called 'EXTROM'.

ok but only because he write in cfg.txt " CAB: \Storage Card\ExtROM\Extrom_version.CAB"
if u want change the name of folder u must change the file cfg.txt :
CAB: \Storage Card\ExtROM\Extrom_version.CAB
CAB: \Storage Card\name-new-folder\Extrom_version.CAB
---------------------------------------------------------------------------------
i return to 2003se ... i use this exended_rom for my 9090

a771la said:
ok but only because he write in cfg.txt " CAB: \Storage Card\ExtROM\Extrom_version.CAB"
if u want change the name of folder u must change the file cfg.txt :
CAB: \Storage Card\ExtROM\Extrom_version.CAB
CAB: \Storage Card\name-new-folder\Extrom_version.CAB
---------------------------------------------------------------------------------
i return to 2003se ... i use this exended_rom for my 9090
Click to expand...
Click to collapse
Two Important note (In my rom).
1. In my ROM I Use Cfg.txt not Config.txt
2. Location of Autorun.exe & cfg.txt has to be in \Storage Card\ExtROM\ (for standardisation purpose)
Location of the CAB is everywhere u want, its ok, as long u edit the cfg.txt that point to that CAB.
for ilustrating purpose this is the contain of my Cfg.txt:
Code:
LOCK:Enabled
SHOW:\Storage Card\ExtROM\custom.bmp
CAB: \Storage Card\ExtROM\Extrom_version.CAB
CAB: \Storage Card\ExtROM\MMS_Enable.CAB
CAB: \Storage Card\ExtROM\Profiles_WWE.cab
CAB: \Storage Card\ExtROM\Flash.CAB
CAB: \Storage Card\ExtROM\SMSDRFixWM5.cab
CAB: \Storage Card\ExtROM\SaveToSIM_WWE.CAB
CAB: \Storage Card\ExtROM\PPCContactsMgr.cab
CAB: \Storage Card\ExtROM\WapPushUnlock.CAB
CAB: \Storage Card\Cab\Resco Explorer 5.31\RescoExplorerEn_p.ARM.CAB
CAB: \Storage Card\Cab\Resco Explorer 5.31\RegistryEn_p.ARM.CAB
CAB: \Storage Card\Cab\Pocket Hack Master 3.25\Pocket Hack Master 2006.2577.CAB
CAB: \Storage Card\Cab\MemMaid.armrel.CAB
CAB: \Storage Card\SpbBackup.arm.cab
CAB: \Storage Card\ExtROM\OPERATOR\CAB-Customization-BlueAngel-O2ASIATelkomsel-19May05.CAB
CAB: \Storage Card\ExtROM\OPERATOR\Telkomsel_ALL_100104.CAB
EXEC: \Storage Card\ExtROM\DelCDetect.exe
LOCK:Disabled
RST: Reset
that got nothing to do with Extrom_version.CAB, Extrom_version.CAB only for showing the Extended Rom version on Device Information

Related

New Rom: Italian Swisscom 14004_8006_12000

New Rom: Italian Swisscom 14004_8006_12000
French rom found on Swisscom Site in Switzerland
http://www.swisscom-mobile.ch/scm/d...&dm=Detail&pa=0x0x0x0x0x0x0x69x0&odg=Software
File : Update9090_it.exe
Original Swisscom files can be found on ftp:
ftp://xda:[email protected]/BA_DT_Swisscom_Updates_14000_original
Extracted Ship.exe on Wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
This is an E-pocketsetup file and can not be extracted by using rar or zip
Downloading the E-pocketsetup application does not help as it will not decode a *.exe file
http://www.e-pocketsetup.com/pocketsetup/download.asp
On running this file I get an error informing me that I have no "Mobile Assistant Device" which must be some software that comes with the Swisscom device.
However the file extracts itself in:
C:\Documents and Settings\%Your LOGIN%\Local Settings\Temp\eps001\BA_DT_Swisscom_ITA_14004_8006_11200_Ship.exe
a hidden dir and thus not found by search by date if you dont have show hidden files
(Thanks indra9110 for that one!!!!!!)
The Header reads
PH20B
DANGA405
Radio 1.12.00
CE 1.40.04
ExtRom 1.40.8006
Config.txt
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Album_BlueAngelAKU26_Generic_ITA_RC20.CAB
CAB: \Extended_ROM\Caller_ID_BlueAngelAKU26_Generic_ITA_RC20.CAB
CAB: \Extended_ROM\BA_MIDI561.CAB
CAB: \Extended_ROM\BA_MIDI_ITA_reg.CAB
CAB: \Extended_ROM\BA_Version.CAB
CAB: \Extended_ROM\BA_OEM_PA_Remove_WiFi_Logo_ITA.sa.CAB
CAB: \Extended_ROM\ClearVue_2.3.377_ITA_0809.sa.CAB
CAB: \Extended_ROM\Qtek_Button9_ITA.sa.CAB
CAB: \Extended_ROM\CAB-MMS-2.0.0.21-BlueAngel-Generic-ITA-27Dec04.sa.CAB
CAB: \Extended_ROM\BA_Camera_Driver_Patch.sa.CAB
CAB: \Extended_ROM\ITA.sa.CAB
CAB: \Extended_ROM\OpenNETCF.SDF.WCE4.ARMV4.CAB
CAB: \Extended_ROM\ComboxGUI_V3_PPC.ARMV4.CAB
CAB: \Extended_ROM\INOMailConfigurator_PPC.ARMV4.CAB
CAB: \Extended_ROM\VoiceServices_PPC.ARMV4.CAB
CAB: \Extended_ROM\CallListManager_PPC_mod.ARMV4.CAB
CAB: \Extended_ROM\Homepage_Italian_PPC2003.STRONGARM.cab
CAB: \Extended_ROM\PocketPlus.CAB
CAB: \Extended_ROM\Fsav.CAB
CAB: \Extended_ROM\Speedscript.Arm.CAB
CAB: \Extended_ROM\Cust_it1_PPC2003.STRONGARM.cab
CAB: \Extended_ROM\timeout.cab
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
I am currently using this rom.
I had a problem at first when I was installing the rom and my vodafone sim was in the phone. I removed and got it to work.
This rom works for me.
pfmboidi said:
I am currently using this rom.
I had a problem at first when I was installing the rom and my vodafone sim was in the phone. I removed and got it to work.
This rom works for me.
Click to expand...
Click to collapse
Questa rom lavora bene? Hanno risolto un po di bugs? Conviene installarla?
Grazie
Klima

New Rom: WWE Swisscom 14000_8007_12000

New Rom: WWE Swisscom 14004_8006_12000
WWE rom found on Swisscom Site in Switzerland
http://www.swisscom-mobile.ch/scm/d...&dm=Detail&pa=0x0x0x0x0x0x0x69x0&odg=Software
File : Update9090_en.exe
Original Swisscom files can be found on ftp:
ftp://xda:[email protected]/BA_DT_Swisscom_Updates_14000_original
Extracted Ship.exe on Wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
This is an E-pocketsetup file and can not be extracted by using rar or zip
Downloading the E-pocketsetup application does not help as it will not decode a *.exe file
http://www.e-pocketsetup.com/pocketsetup/download.asp
On running this file I get an error informing me that I have no "Mobile Assistant Device" which must be some software that comes with the Swisscom device.
However the file extracts itself in:
C:\Documents and Settings\%Your LOGIN%\Local Settings\Temp\eps001\BA_DT_Swisscom_WWE_14000_8007_11200_Ship.exe
a hidden dir and thus not found by search by date if you dont have show hidden files
(Thanks indra9110 for that one!!!!!!)
The Header reads
PH20B
DANGA001
Radio 1.12.00
CE 1.40.00
ExtRom 1.40.8007
Config.txt
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\BA_Version_140.CAB
CAB: \Extended_ROM\Album_BlueAngelAKU26_Generic_WWE_RC20.CAB
CAB: \Extended_ROM\Caller_ID_BlueAngelAKU26_Generic_WWE_RC20.CAB
CAB: \Extended_ROM\MIDI561.sa.CAB
CAB: \Extended_ROM\ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
CAB: \Extended_ROM\CAB-MMS-2.0.0.21-BlueAngel-Generic-ENU-27Dec04.sa.CAB
CAB: \Extended_ROM\Button9.CAB
CAB: \Extended_ROM\BA_OEM_PA_Remove_WiFi_Logo.sa.CAB
CAB: \Extended_ROM\BA_Camera_Driver_Patch.sa.CAB
CAB: \Extended_ROM\WWE.sa.CAB
CAB: \Extended_ROM\OpenNETCF.SDF.WCE4.ARMV4.CAB
CAB: \Extended_ROM\ComboxGUI_V3_PPC.ARMV4.CAB
CAB: \Extended_ROM\INOMailConfigurator_PPC.ARMV4.CAB
CAB: \Extended_ROM\VoiceServices_PPC.ARMV4.CAB
CAB: \Extended_ROM\CallListManager_PPC_mod.ARMV4.CAB
CAB: \Extended_ROM\Homepage_English_PPC2003.STRONGARM.cab
CAB: \Extended_ROM\PocketPlus.CAB
CAB: \Extended_ROM\Fsav.CAB
CAB: \Extended_ROM\Speedscript.Arm.CAB
CAB: \Extended_ROM\Cust_en1_PPC2003.STRONGARM.cab
CAB: \Extended_ROM\timeout.cab
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Extracted Ext Roms Files can be found in the kitchen:
ftp://xda:[email protected]_1.4x_008/BA_DT_Swisscom_WWE_14000_8007_11200
Note:
I dont run 1.40 roms through the kitchen any longer as 1.42 is the current rom
If somebody feels like it they should have a look at the following cabs and check version as well as if they are full or trail.
CallListManager_PPC_mod.ARMV4.CAB
PocketPlus.CAB
Fsav.CAB (Antivirus software)
Speedscript.Arm.CAB (Seems to he a german dll for handwritng regonition ...MAYBE)
timeout.cab (hum timeout .... Bluetooth ???)

Loving Wife Unlock Ext Rom Wizard

i unlocked the extended rom using one of the .cab files from here somewhere, called Loving Wife Unlock Ext Rom Wizard and it unlcok the extended tom with these files in there :-
LOCK:Enabled
CAB: \Extended_ROM\Signed_O2UK_103040101_RingTone.sa.cab
CAB: \Extended_ROM\Signed_O2UK_exception.sa.CAB
CAB: \Extended_ROM\Signed_O2UK_Region_Customize.sa.CAB
CAB: \Extended_ROM\Signed_WIZ_O2UK_PIE_homepage.sa.CAB
CAB: \Extended_ROM\Signed_DiscoButton_16.sa.CAB
CAB: \Extended_ROM\MP_Customization_O2UK_Wizard(AKU2.0)_060124.CAB
CAB: \Extended_ROM\MP_SmartDialing_enable_0915_signed.CAB
CAB: \Extended_ROM\MP-Shortcut-MMS1-JAVA5XX-VOICE-051228.CAB
CAB: \Extended_ROM\MT_PhoneLight_Skin_O2_WWE_1005.CAB
CAB: \Extended_ROM\MP_CVSDcpl_20060220.cab
CAB: \Extended_ROM\MT_Contactpicker_SmartDialing_2_2_22954_20060310.CAB
CAB: \Extended_ROM\P_UA_2164101_Wizard.cab
CAB: \Extended_ROM\Signed_DisableBeam_O2UK_Wizard_1206.sa.CAB
CAB: \Extended_ROM\P_Version_O2UK_Wizard.cab
CAB: \Extended_ROM\Signed_SMS_NoUnicode.sa.CAB
CAB: \Extended_ROM\O2UK_Voice_mail.cab
LOCKisabled
CAB: \Extended_ROM\signed_Prodigy_o2AUI4_build35.cab
can someone tell me what they do as i have not installed them, and the other problem i have is that now everything wants to save to extended_rom2 instead of my storage card.
can anyone help?
thanks in advance

Help! Wizard EXT. ROM question?

Hi, I am newbie in hacking into preinstalled content of my wizard. I have installed T-Mobile Rom that has some kind of protection which does not let me to change MMS settings (it has installed settings that I can not edit nor can I delete it). I've tried downloading network configuration wizard but there is no configuration for my country... Everything other regarding this rom works fantastic and smooth...
So I menaged to make EXTENDED ROM visible, and downloaded new Arcsoft MMS composer (hoping that this will make a difference) but now I can not find cab file in ext.rom that represent mms composer, which I would like to replace with new mms composer.
Can you help me, and tell me what to delete from my extended rom? Should I delete mms composer from ext.rom or some other cab with t-mobile settings.
Here is my config.txt from extended rom:
Code:
LOCK:Enabled
CAB: \Extended_ROM\MP_CVSDcpl_20060220.cab
CAB: \Extended_ROM\PhoneLight_Skin_TMO_US_1124.CAB
CAB: \Extended_ROM\PhoneLight_TMO_OverBMP_1124.CAB
CAB: \Extended_ROM\Signed_wispa_ppc_release.CAB
CAB: \Extended_ROM\Signed_OZPocketPC.Cab
CAB: \Extended_ROM\UXC_WWE_20051020.cab
EXEC:\Extended_ROM\cusTSK.exe \Windows\T-Mobile.tsk
CAB: \Extended_ROM\MP_Customization_TMOUSA_Wizard(AKU2.x)_060615_noJava.CAB
CAB: \Extended_ROM\MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB
CAB: \Extended_ROM\MP_SmartDialing_enable_0915_signed.CAB
CAB: \Extended_ROM\MT_SmartDialing_Skin_TMO_US_060519.CAB
CAB: \Extended_ROM\TMOUS_Camera_Profile_reg_0414_signed.CAB
CAB: \Extended_ROM\PP_ExtVersion.CAB
CAB: \Extended_ROM\Signed_TMOUSA_Setting_pIE_Wiz10810102.sa.CAB
CAB: \Extended_ROM\Signed_Update_RingTone_1810102.sa.CAB
CAB: \Extended_ROM\Signed_Move_IM_Link.sa.CAB
CAB: \Extended_ROM\P_Generic_UI.CAB
CAB: \Extended_ROM\P_Generic_Conn_Settings.CAB
CAB: \Extended_ROM\P_Other_Conn_Settings.CAB
CAB: \Extended_ROM\P_Fix_UXC_today_plugin.cab
CAB: \Extended_ROM\P_SecurityPolicy.CAB
CAB: \Extended_ROM\P_tmobile_email_notification_2005PPC_NET_rom.CAB
CAB: \Extended_ROM\PP_Revceive_beams_Uncheck.sa.CAB
CAB: \Extended_ROM\wwsetup-tmobile.cab
CAB: \Extended_ROM\t-zone-shortcut-20Jun06.CAB
CAB: \Extended_ROM\PP_GPRSandEGDE_DTMF.CAB
CAB: \Extended_ROM\Enable_NTIZ_.cab
LOCK:Disabled:D :D :D
RST: Reset
Can you tell me what to delete or replace? What is unnecessary from above?
Thank You very much in advance...
If you are using a G4 (or locked G3), you have no way to remove any files in ExtROM.
Thank You... I've just realized that I guess I will have to use it without mms or gprs... Anyway, it's a great phone...
Thanks anyway
Can't you do a HARD reset, then after the phone boots, Soft reset before the extended rom loads, then manually setup your MMS/GPRS?

Autocabs can't find my cabs

hi!
I tried to let autocabs install some of my cabs, but then an error shows up, that Autocabs can't find my cabs.
After that I tried an other Sdconfig.txt but now it seems like autocabs doesn't start at all!
My cabs are in \Storage Card\cabs\
this was my sdconfig.txt
LOCK: Enabled
CAB: \Storage Card\Cabs\German_Herald_Keyboard_v2.cab
LOCK: Disabled
HIDE: Enabled
CAB: \Storage Card\Cabs\Excel_Mobile_6.1.cab
CAB: \Storage Card\Cabs\One_Note_Mobile_6.1.cab
CAB: \Storage Card\Cabs\PowerPoint_Mobile_6.1.cab
CAB: \Storage Card\Cabs\Word_Mobile_6.1.cab
HIDE: Disabled
RST: Reset
btw. could anyone discribe what the Hide and Lock exactly means?
ruebyi

Categories

Resources